Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.0 LAccepted-AOC VPO DHANNA DISTT KATHUA J K PIN 184152 | KATHUA | JAMMU AND KASHMIR | 184152 | L1 | Accepted-AOC found lowest | |
| 2 | L2₹29.8 L+₹4.8 L (19.4%)Rejected-AOC | L2 | Rejected-AOC not found lowest | |
| 3 | L3₹31.4 L+₹6.4 L (25.8%)Rejected-AOC VILL DANNA PO TEH BASANTPUR DIST KATHUA JAMMU KASHMIR | BASANTPUR | KATHUA | JAMMU KASHMIR | L3 | Rejected-AOC not found lowest | |
| 4 | L4₹33.3 L+₹8.4 L (33.6%)Rejected-AOC VPO SATROD KALAN HISAR HARYANA | HISAR | HISAR | HARYANA | L4 | Rejected-AOC not found lowest | |
| 5 | L5₹33.9 L+₹9.0 L (36.0%)Rejected-AOC VILLAGE DUGRI RAJPUTTAN POST OFFICE TANDA RAM SAHAI TEHSIL MUKERIAN DISTRICT HOSHIARPUR PUNJAB | MUKERIAN | HOSHIARPUR | PUNJAB | L5 | Rejected-AOC not found lowest |
Tender Value
₹37.5 L
EMD Value
₹75,020
Closing Date
7 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
GE BASOLI PIN-184152
CERTAIN SANCTION WORKS AT JANGLOT AND MADHOPUR MIL STN UNDER GE BASOLI
2023_MES_602014_1
GE/BAS-27/2023-24
Open Tender
Civil Works
Item Rate
180 days
Janglot and Madhopur
Class E and Cat
a(i) AND a(ii)
8 documents required · 8 mandatory
₹500
GE BASOLI
₹75,020
Yes
6 Sept 2023
8 Jun 2023
10 Jul 2023
8 Jun 2023
7 Jul 2023
23 Jun 2023
Amount
Taking down steel window & ventilator with wire mesh/glazed shutter (Without taking of shutter from frame) area n exc 1.50Sqm each complete.
Taking down chowkat with shutter (Without taking of shutter from frame) area exceed 1.50 Sqm but not exceed 4.00 Sqm each complete.
Demolition of Brickwork or stone/ boulder masonry, built in built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete.
Demolition cement concrete unreinforced of any description and in any position not otherwise specifically provided for all complete and as specified.
Demolition cement concrete (Reinforced) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and cement concrete is reinforced (reinforcement cut as required to facilitate demolition) all as specified and directed.
Removing excavated material beyond 500 m and upto total distance of 1.5 km.
Taking down steel tubing and connections of 15mm bore dia of pipe all as specified and directed..
Taking down steel tubing and connections of 20mm bore dia of pipe all as specified and directed.
Dismantling of water tank of capacity exc 250 but not exc 500 ltr from roof slab all as specified and directed.
Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) n.exc. 1.5 Sqm Complete all as specified and directed by Engineer-in-Charge.
Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm each. Complete all as specified and directed by Engineer-in-Charge.
Taking down shutters of any description exc 1.0sqm and n.exc 2.0 sqm. Complete all as specified and directed by Engineer-in-Charge.
S&F in repair PVC board 18-20mm thick prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber/angle iron frame work etc, weight not less than 3.50 Kg/Sqm complete all as specified.
M&L For Glazed and skelton shutters 35mm thick of 2nd class HW open rebated and prepared to receive glass or wire gauze etc. shutters divided in square with shash bars, size of members of shutters as specified in SSR Part-1, secton 8, clause 8.20(a) complete all as specified and directed by Engineer-in-Charge.
M&L For Plain framed factory made 35mm thick shutter of 2nd class HW (two panel) with lock rail and panels of 12mm veneered partical board with commercial veneering on both faces , the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated complete all as specified and directed by Engineer-in-Charge.
M&L Painting to new wooden surfaces including prepration applying one coat of pink primer and two coats of synthetic paint.complete all as specified and directed by Engineer-in-Charge.
M&L Painting to old wooden surfaces including preparation and applying one coat of synthetic paint complete all as specified and directed by Engineer-in-Charge.
M&L 1.25mm thick pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike mate etc complete of size 105x60mm Complete all as specified and directed by Engineer-in-Charge.
M&L For PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in back filling of chowkats Complete all as specified and directed by Engineer-in-Charge.
S&F steel window/ventilator factory made out of box type frame and shutter (double shutter, one for glazing another for flyproofing) made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings and grills, all as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 all as complete all as specified and directed.
M&L for preparation of new steel surfaces of any description, over 10cm width or girth, not otherwise describe applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
M&L Painting to old steel surfaces including prepration applying one coat coat of synthetic paint complete all as specified and directed by Engineer-in-Charge.
S&F Powder coating aluminium window and ventilator shutters,(double shutter, one for glazing another for flyproofing) side hung type without sash bars, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos) suitable handle (2 No) complete all as specified.
S&F For Sheet glass, ordinary quality 3mm thick and glazing with oil putty in squares n exc 0.5 sq m in each pane all complete and as specified.
S&F 3.00 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane. complete all as specified and directed by Engineer-in-Charge.
S&F For Galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed by Engineer-in-Charge.
S&F Stainless Steel plate rack of size 900mm x 900mm x 250mm and 0.80mm thick sheet complete all as specified and directed by Engineer-in-Charge. Make: Blue Star/ Neelkamal
S&F in repairs flush pipe of polyethylene of low or high density or PVC 32 mm dia, for wash hand basin / sink complete all as specified and directed by Engineer-in-Charge.
S&F Sink with drainage board made of stainless steel 0.9mm thick kitchen or labourator with plug washers,and waste pipe, incl bedding in CM to drwaf wall or incl fixing cantilever brackets and conecting union to pipe over all size 915mmx450mm bowl size 410mm x 330mm x 160mm incl Sink waste coupling complete all as specified and directed by Engineer-in-Charge.
S&F Solid PVC door frame (single rebated) of size 60mmx30mm made out of solid PVC frame with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws all as specified and as shown on drawing complete all as specified and directed by Engineer-in-Charge.
S&F Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge.
S&F stainless steel handles 200mm ,cast type, anodised ,125 mm size all complete and as specified.
S&F stainless steel barrel tower bolts size 200mm all complete and as specified.
S&F aluminium alloy , anodised ,sliding door with hasp and size 300mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section all complete and as specified.
S&F For stainless steel butt hinges 100mm complete all as specified and as directed by Engineer-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade including 15 mm screed bed in CM 1:4. all complete and as specified.
M&L For Glazed ceramic coloured tiles in vertical surfaces 450x300X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade with 10 mm thick cement plaster in C.M 1: 4 . All complete and as specified.
M&L For cement concrete type B-0 1:2:4 using (12.5 mm graded stone aggregates) 25 mm thick in flooring complete all as specified and directed by Engineer-in-Charge.
M&L Granite Black Colour of any type 16-18mm thick machine cut as in cooking plateforms and over 15 mm csreed bed in cement mortar ( 1:4 ) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge.
Rounding/moulding to edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooding platform , and other similar situations etc complete all as specified and directed by Engineer-in-Charge.
S&F steel water tubing medium grade 15mm bore galvanished with all fitting to walls etc complete all as specified and directed by Engineer-in-Charge.
S&F steel water tubing medium grade 20mm bore galvanished with all fitting to walls etc complete all as specified and directed by Engineer-in-Charge.
Refixing old steel tubing and connections 15mm bore in new or old position (wall, ceiling ,floors etc) complete all as specified and directed by Engineer-in-Charge.
Refixing old steel tubing and connections 20mm bore in new or old position (wall, ceiling ,floors etc) complete all as specified and directed by Engineer-in-Charge.
Dismantling of PVC or cast iron pipes jointed in cement mortar and taking out upto 110 mm complete all as specified and directed by Engineer-in-Charge.
S & F 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed to wall/floor complete all as specified and directed by Engineer-in-Charge.
S & F 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed to wall/floor complete all as specified and directed by Engineer-in-Charge.
S & F PVC (SWR) Bends in any radius 110 mm bore with access door in repair complete all as specified and directed by Engineer-in-Charge.
S & F PVC SWR Bends in any radius 75 mm bore with access door in repair complete all as specified and directed by Engineer-in-Charge.
S&F in repairs for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.
S&F PVC (SWR) Vent cowl 75 mm bore in repaircomplete all as specified and directed by Engineer-in-Charge.
S&F for bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle fancy type of bore 15mm colmplete all as specified by Engineer-in-Charge.
S&F in repair stop valve cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge.
M&L Brick masonry with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cm 1:6 complete all as specified and directed by Engineer-in-Charge.
S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified.
S&F in repairs water closet squat pattern with vitreous china white Ist quality water closet Orissa pattern size 580x440 with integral foot rest and cost iron for S trap complex complete all as specified and directed by Engineer-in-Charge.
S&F brass CP mixer for mixing hot and cold water screwed down for iron pipe, 15 mm bore, in repair complete all as specified and directed by Engineer-in-Charge.
S&F PVC flushing cistern low level,10 litre capacity with it’s complete accessories, fixed complete including connection to water pipe and seat complete all as specified and directed by Engineer-in-Charge.
S&F in Repair rotational molded polyethylene water storage tank (Cylindrical vertical with closed tip) of 500 ltrs hoisted and fixed in position all as specified and directed in SSR-Part-I on roof complete all as specified and directed by Engineer-in-Charge.
Supply and fixed gun metal gate valve 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified by Engineer-in-Charge.
Supply and fixed Float Ball Brass Valve, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule all as secured and directed 20mm bore complete all as specified and directed by Engineer-in-Charge.
M&L for rendering 5 mm thick in CM (1:3) with smooth finish in ceiling complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of new plastered surface and applying three coats of white wash on ceiling complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of Old plastered surface and applying three coats of white wash on ceiling complete all as specified and directed by Engineer-in-Charge.
M&L Rendering 15 mm thick on brick or concrete surface over internal surface with CM 1:6 surface finished ever and smooth with out using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L Preparation of new plastered surfaces and applying two coats of distemper oil emulsion on plastered surfaces complete all as specified and directed by Engineer-in-Charge.
M&L Preparation of old plastered surfaces and applying two coats of distemper oil emulsion on plastered surfaces complete all as specified and directed by Engineer-in-Charge.
Surface excavation n exc 30cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed by Engineer-in-Charge.
Removing excavated material (soil) to a distance n exc 50 metres and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and directed by Engineer-in-Charge.
M&L Hard core of gauge n exc. 63mm depositing, spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.
M&L For 75mm thick cement concrete type D-2 1:4:8 (40mm graded agg) as in sub base, finished cement concrete surface fair & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge.
M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and directed by Engineer-in-Charge.
M&L For Cement concrete M-15 Nominal mix in coping benching/PCC drain and the like including weathering ,slightly rounded or chamfered angles as directed including form work and finished all exposed surfaces complete all as specifed and directed.
Excavation in trenches n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth of making trenches for laying of CI/GI pipe and getting out in any type of soil complete all as specified and directed.
Returning filling in and including spreading, levelling,watering and well ramming in layers not exceeding 25 cm. complete all as specified and directed by Engineer-in-Charge.
Supply & laying pipes galvanised, "Medium grade", of size 25 mm dia in trenches/blgds complete including fittings all as specified and directed Make :- Jindal / TATA / BST
Supply & laying pipes galvanised, "Medium grade", of size 20 mm dia in trenches/blgds complete including fittings all as specified and directed Make :- Jindal / TATA / BST
Supply and fixing Gun metal gate Valve of size 25 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed.
Cutting existing GI water main pipe line 20/25/40mm bore in position for making branch connection (insertion of cast iron Tee) including excavation and earth work complete all as directed.
Point wiring with 1.5 Sqmm (Nominal area) copper conductor FRLS cable (Multi Stranded) PVC insulated and unsheathed in and including concealed PVC rigid non metallic conduit (ISI Marked) with sunk cast iron/ pressed steel terminal boxes of suitable size with 3mm thick plastic laminated sheet for _______ socket point controlled by one switch incl 1.5sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed with colour code earth wire connected to common earth dolly complete all as specified. Note: Unit rate for cutting chases for conduit and sinking of boxes and making good to wall, floor ceiling complete all as specified and as directed by Engr-in-Charge.
Point wiring with 2.5 Sqmm copper conductor FRLS cable (Multi Stranded) PVC insulated and unsheathed cable conductor in and including concealed PVC rigid non metallic concealed conduit (ISI marked) of suitable size with sunk cast iron/ pressed steel terminal boxes of adequate size with 3.0mm thick plastic laminated sheet cover for one 3 pin socket outlet 15 Amp on independent board incl continuous 2.5 sqmm copper conductor FRLS (Multistranded) PVC insulated and unsheathed cable earth wire connected to common earth dolly complete all as specified and as directed. Note: Unit rate for cutting chases for conduit and sinking of boxes and making good to wall, floor ceiling complete all as specified and as directed by Engr-in-Charge.
S& F switch paino flush type single pole one way 5 Amps
S & F socket outlet 2 in 1 3 Pin 5 Amps flush type multi purpose.
S & F socket outlet 3 Pin 15 Amps flush type multi purpose.
S&F switch paino type 15 Amps flush type single pole one way complete all as specified and as directed
Supply,fixing& testing of Horizontal type water heater storage type with multifunctional safety valve, electric operated 230 V, Single Phase 5 Star rated complete including one no of heating element, automatic, thermal cut out, fusible plug, anti vacum sys, built in presser release valve,thermostat, rust proof powder coated body, indicator lamps and all safety advices and of capacity 25 liters including with suitabale and making good disturbed surface complete all as specified and directed by Engineer-in-charge. Make : Bajaj/Havells/Jaguar
S&F in replacement sheet metal powder enclosure powder coated versatile single door 2way (SPN) distribution board for MCB provisions 230Volt, 50Hz AC with neutral link , earth bar complete all as specified.
S&F MCBs single pole and neutral (SPN) 25 Amps with 10 KA breaking capacity of 'C' series in distribution boards all as specified and directed.
S&F sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 4.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 4.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 4.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.
Amrik Construction co
Ms International Engineers
M/S RAJINDER SINGH
M/s. Jaswant Singh Govt Contractor
M/S NEERAJ ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .