Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.1 LAccepted-AOC CITY TOWER BUILDING ROOM NO 306 CIRCULAR ROAD DIMAPUR 797112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹46.3 L+₹5.2 L (12.6%)Rejected-Finance HOUSE NO 59 THILIXU VILLAGE BLOCK V PS POST DIMAPUR NAGALAND 797 112 | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L2 | Rejected-Finance Quoted amount higher than L1 |
Tender Value
₹39.3 L
EMD Value
₹78,700
Closing Date
14 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
COL N K CHAUDHARY
HQ 137 WKS ENGR PIN 914137 CO 99 APO
PROVN OF INTERNAL ROAD AND FOOTPATH AT XXXXX AT RANGAPAHAR MIL STN
2022_MES_563113_1
8728/E8
Open Tender
Civil Works - Roads
Item Rate
180 days
DIMAPUR
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE 868 EWS
₹78,700
2 Jan 2023
15 Nov 2022
21 Dec 2022
15 Nov 2022
14 Dec 2022
30 Nov 2022
Amount
Material and labour for earth work in excavation over areas by mechanical means (Hydraulic excavator) including getting out and disposal of excavated earth upto 250 m and and depositing where directed at a level n.exc 1.5mtr above the starting point complete all as specified and directed.
Rolling and consolidation of formation of surfaces in cutting with power roller of 8 to 12 tonne capacity power roller including filling up depression which occur during rolling complete.
Material & labour for approved GSB (Granular Sub Based) 150mm thick, Spread thickness in two layers 75mm each with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified.
Material and labour for PCC 1:4:8, Type D-2 (using 40mm graded stone aggregate) 100mm thick, as in sub base of concrete road pavement, including rolling using 8 to 10 tonne road roller complete all as specified and as directed
Material & labour for 30 mm thick sand layer over DLC layer for cushion to polythene sheet complete. (Note: Punned thickness to be measured for payment purpose)
Material & labour for providing 400 micron thick ploythene film white/light colour over DLC complete all as specified and directed..
Material & labour for 250 mm thick RMC in Pavement Quality Concrete (PQC) of minimum field flexural strength 40 Kg/Sq cm(lower control limit-LCL) after 28 days in pavement slab using 400 kg of cement per cum and using non circular fibre synthetic reinforcement @ 0.25% by weight of cement with crushed stone aggregate of grading as specified laid in panels,including necessary formwork, spread and compacted bull nosing/rounding off edges, curing, broom finishing on top, belting, etc complete all as specified in para 20.B.& of MES SSR Part-I, 2009 and IRC: 15 (latest revision) & MORTH (5th revision) including necessary form work, finishing and directed. Note :- (i) Admixture if required as per approved design mix shall be added and cost of Admixture and mixing shall be deemed to be included in the quoted rate. (ii) Polyester triangular fibres as secondary reinforcement mixed in concrete shall be measured and paid separtely under respective item of this schedule. However mixing shall be deemed to be included in the quoted rate. (iii) Constrction joints, dummy (contraction joints) and expansion joints shall be measured and paid separately under respective items. (iv) Deduction shall be made in computing concrete quantity for expansion joints. (v) No price adjustment shall be applicable if excess quantity of cement content is used/approved in the execution of work under this item. However minus price adjustment shall be made for less quantity of cement used in the work based on inserted rate. (vi) Design mix to be got approved by the Accepting Officer prior to incorporation in the work.
Supply only polyester triangular synthetic fibres 6/12mm long with circum circle diameter 30-35 micron desgined for melting point 240 -260 degree celsius having specific gravity 1.34 to 1.4 Recron 3S manufactured by M/s Reliance Industries Ltd Mumbai or M/s Finolex Industires Ltd or equivalent as secondary reinfocement in all type of concrete @0.25% by wt of cement complete. (@1.0 Kg per cum of PQC)
Material and labour for finishing top concrete pavement with wire brush while concrete is green complete.
Material and labour for forming 20mm wide and 250mm depth expansion Joint the said joint will be filled with 20mm thick and 205 mm deep with polymer based filler board (Dura Board HD-10) above the polymer filler Board apply bond with breaker tape and above the breaker tape polyethylene backup rod of 25mm dia will be provided, remaing 20mm deep joint will be filled with polyurethane sealent conforming to BS-5212. The bottom width and vertical edges shall be primed with Two (02) coats of polyurethene sealent. The sealent should have minimum movement accomodation factor of (+ 30%) and care shall be taken that polyurathene sealent do not get spill out of the joint complete all as specified and directed.
Material and labour for forming 10mm thick and 65mm deep (dummy) joints. The said joints will be completely filled with polyurethane sealent compound conforming to BS-5212, BS-4254 and EN-141875-2003 for hydorlysis/water resistance test will be carried out. Bottom and vertical edges shall be primed with Two (02) coats of polyurethen sealent. The sealent should have minimum movement accommodation factor of (+ 30%) and care shall be taken that polyurethen sealent do not get spill out of the joint complete all as specified and directed.
Material and labour for forming construction joints 10mm thick and 30mm deep (dummy) joints. The said joints will be completely filled with polyurethane sealent compound conforming to BS-5212, BS-4254 and EN-141875-2003 for hydorlysis/water resistance test will be carried out. Bottom and vertical edges shall be primed with Two (02) coats of polyrethen sealent. The sealent should have minimum movement accommodation factor of (+ 30%) and care shall be taken that polyurethene sealent do not get spill out of the joint complete all as specified and directed. Note for item No 10 to 12. (i) Laying of sealents shall be done by using mechanical device or as directed by GE at site. (ii) Contractor shall lodge 10 yrs gurantee for the said items. The amount of gaurantee will be calculated as per EMD formula given in para 2.1 mentioned in E-in-C's Manual on Contracts 2020. After completion of job contractor will submit FDR from approved Govt Bank in favour of GE 868 EWS or failing do so the said amount will be recovered from his RAR or from FB. The decission of GE to this effect shall be final & binding upon the contractor. (iii) All testing of material will be carried out in Govt approved lab or Pvt lab approved by NABL. The cost for testing shall deemed to be included in quoted rate.
Material & labour for painting lines, dash arrows, letters on concrete/road pavement and alike exceeding 10cm width with road making paint with white, gold yellow on any tint as directed by.
Material & labour for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Surface dressing n exc15 cm deep in soft/loose soil.
Material and labour for broken stone hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammmed to a true surface complete all as specified and as directed.
Material and labour for 100 mm thick Plain Cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base of floor, finished the surface fair and even complete all as specified.
Material & labour for 50 mm thick sand cushioning for laying of interlocking block including watering and consolidation complete all as specified and directed. (Note: Punned thickness to be measured for payment purpose)
Material and labour for machine pressed precast concrete interlocking paver block any shape & size conforming to IS15658-2006 of 80mm thickness M-40 grade using grey cement & no pigment complete all as specified and directed.
Material and labour for PCC (1:2:4) type B1 using 20mm graded stone agg in plinth courses, string courses, parapets, kerbs, bed plates and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed.
Shri Atoshe Tuccu
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .