PROVISION OF ROOF COVERING TILING TO BALCONY LOBBY AT BLDG No MC3 XIV OF MRC AND PROVISION OF RETAINING WALL BEHIND BLDG No XXIV H 9 JCO CLUB OF MH WELLINGTON AND CERTAIN MINOR WORK UNDER GE WELLINGTON

Amount

Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or chnnels sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc of Fe 410-W (Gde E-250) quality A all as specified and as directed.

Mild steel works in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle) including distance pieces, cleats etc.of grade Fe-410-W (Gde-E-250) quality-A all as specified and directed.

Mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed.

Mild still screw bolts of 11 to 15 mm diameter of shank (machine made ) with hexagonal or squre heads at one end and screwed the other ,each screwed end to to be fitted with washers and one hexagonal or squre nut, but length of bolt exceeding 5 cm and not exceeding 10 cm long all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Demolition of Cement Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

40mm thick Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate complete all as specified and directed.

Demolition of Brickwork, stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Brick work with sub class ‘B’ bricks, (old size) straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc ,complete all as specified and as directed

Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Heavy duty durastone tiles non skid of size 400x400x10-12mm thick as in floors etc, and jointed in neat cement slurry and pointed in white cement with pigment to match with the colour of tiles including screed 20mm thick in cement mortar 1:6 complete all as specified and directed.

Heavy duty durastone tiles of size 400x100/200x10-12mm thick as in skirting/ dados etc, and jointed in neat cement slurry and pointed in white cement with pigment to match with the colour of tiles including screed 10mm thick in cement mortar 1:4 complete all as specified and directed.

Preparation of new or untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion Paint ( Anti Fungal) white or tinted over a coat of primer and including one coat of external wall care putty as approved by GE complete all as specified and as directed

Excavation over areas, not exceeding 1.5m deep and getting out in soft / loose soil all as specified and directed.

Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concreting, complete all as specified and directed.

Reinforced cement concrete M-25 design mix using 20 mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under-reamed piles and mass concrete all as specified and directed.

Reinforced cement concrete M-25 design mix using 20 mm graded stone aggregate as in walls, retaining walls, basement walls, ballast wall and the like, any thickness, above top of footings including attached pilasters and buttresses all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, base of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work; vertical or to batter flat surface rough finished complete all as specified and directed.

Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillaster, buttresses etc, vertical or batter rough finished flat surfaces of concrete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints laid in RCC retaining walls as in weep holes all as specified and as directed.

Hand packing broken stone aggrgate (any thickness) at back of walls over arches etc and raising (or lowering) to the required level all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in hard/ dense soil complete all as specified and directed

Forming embankments using soil including raising (or lowering) earth spreading in layers not exceeding 30cm thick watering ramming/ rolling and finishing to required size, shape etc not exceeding 1.5m high from base all as specified and directed.

Forming embankments using soil including raising (or lowering) earth spreading in layers not exceeding 30cm thick watering ramming/ rolling and finishing to required size, shape etc exceeding 1.5m and not exceeding 3.0m high from base all as specified and directed.

Removing excavated surplus soil to a distance exceeding 50m and not exceeding 250m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.

Pre-cast cement concrete block masnory with solid block type C1 1:3:6 using 20mm graded aggregate exceeding 10cm in width and setting in mortar 1:6 complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces/ block wall other than fair faces of brick work finished fair and even all as specified and directed.

PCC 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses, etc and similar work including necessary form work and weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Applying two coats of oil bound distemper over a coat of primer including one coat of wall care putty in two layer, 2-3mm thick in two layers on newly plastered wall surface including preparation on internal surface of wall all as specified and directed.

75mm thick plain Cement concrete, 1:3:6, type C-1 using 20 mm graded stone aggregate as in plinth protection and hard standing finish even and fair complete all as specified and directed.

PCC 1:3:6 type C2 using 40mm graded stone aggregate in surface channel & drain etc for maintining slope and free flow of water including cleaning of drain required form work complete all as specified and directed.

Supply, laying and testing steel water tubing medium grade galvanized with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing with all fitttings complete of size 15mm all as specified and directed.

Supply, laying and testing steel water tubing medium grade galvanized with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing with all fitttings complete of size 20mm all as specified and directed.

Rotational moulded polyethylene water storage tank of capacity 1000 Ltr (cylindrical vertical with closed top) three layers, hoisted and fixed in position with proper inlet and outlet connections including brass float valve 20mm bore all as specified and as directed

Ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of size 20mm dia (minimum weight 210 grms) complete all as specified and directed.

Mild steel Framed work such as grill, grating etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron door, ladders, framed balusters and simialr work conforming to Fe290 Gde E-165 all as specified and directed.

Excavation over areas, not exceeding 1.5m deep and getting out in hard / dense soil all as specified and directed.

Excavation over areas, exceeding 1.5mtr but not exceeding 3.0mtr deep getting out in hard / dense soil all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in hard/ dense soil complete all as specified and directed.

Reinforced cement concrete Type B1, 1:2:4 using 20mm graded crushed stone aggregate for beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed.

Reinforced cement concrete (nominal mix) 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall, beam and column in floors, roofs, landings, balconies, canopies and in shelves and similar work complete all as specified and directed.

Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in cement mortar 1:6 complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately.

Use and waste of Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) rough finished surfaces complete all as specified and directed

Mild steel TMT bars 6 to 8mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips in stirrups, spacers, binders, etc complete all as specified and directed.

Concrete bed to drain pipes including packing under and haunching against the sides of the pipes after they are laid and tested in cement concrete 1:4:8 type D-2 using 40mm graded aggregate for 150mm dia size pipe all as specified and directed.

Salt Glazed stoneware drain pipes of 150mm internal dia, grade 'A' laid in trenches and jointed in cement mortar 1:1 mixed with spun yarn and testing complete all as specified and directed

PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

PVC (SWR) vent cowl of 110mm bore of pipe complete all as specified and directed

Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed multistranded copper conductor single core cable 1100 volts grade in and including PVC surface conduit medium grade complete with conduit fittings/accessories with provn of 1.2 mm thick MS terminal boxes of suitable size and 3 mm thick plastic laminated sheet top cover for housing of switches, sockets etc including 1.5 sqmm FRLS grade PVC insulated unsheathed multistranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/ fan point all as specified and directed.

Lamp holder, PVC/ Polycarbonate type with cord grip cap suitable for pendant fittings all as specified and directed.

Ceiling rose, 3 terminals PVC / polycarbonate, isolated body all as specified and directed.

Modular switch one way 6A 230V AC 50 HZ SP one module all as specified and directed.

MCB DB SPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.

Supply and fix 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. Make: ABB/ Legrand/ L&T.

All as per item No. 59. hereinbefore but SPN 230V 32 Amps capacity all as specified and directed.

10W LED lamp, B-22, 5 star lamp, lumen 1200 & 6000K holder type all as specified and directed. Make Havells Cat Part No-LHLDEUEBML8Z010 or equivalent in Phillps/ CG

Taking down old unsv FTL fittings, Supply and fix 22W LED 125 Lum/Watts 4ft batten comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser gets glare free, smooth light distribution lamp colour white all as specified and directed. Make. HavellsCat Part No. LHEXBLP7PN1W022 or equivalent in CG/ Philips / Bajaj.

Electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, PVC connection piece etc. all as specified and directed. Make: Crompton/ Bajaj/ Racold

PVC connections 15mm size with PTMT nuts of length 300mm all as specified and directed.

Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20A SP MCB all as specified and directed. Make-Legrand/ABB/Havells

Submain wiring with 2 runs of FRLS grade PVC copper conductor cable4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed.

Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed.

Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including making openeing brick/ stone Masaonary Wall as per reqiurement of Exhuast Fan and make good and matching with existing surfaces complete all as specified Make:Crompton Greaves/ Havells/ Bajaj

Stop valves 15mm bore cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union fixed complete all as specified and directed.

Cutting the existing pipe line of any size and insert the 20mm bore GI pipe fittings i.e Tee reducer existing size to 20mm bore all as specified and directed.

Sree Constructions