E-TENDAR 2025-26 Raygaon Karmala

Providing and laying in situ, cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, compacting and curing complete, with reversible Drum Type mixer, With natural sand. Spec. No.: Bd. E. 1 Page No. 287

Providing and laying in situ, cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, compacting and curing complete, with reversible Drum Type mixer, With natural sand. Spec. No.: Bd. E. 1 Page No. 287

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.5 Page No. 300 and B.7, Page.No. 38

Providing & casting in situ cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement). With reversible Drum Type concrete mixer With natural sand. Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38

Providing and casting in situ cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).with reversible Drum Type concrete mixer With natural sand. Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water, striking joints on unexposed faces, raking out joints on exposed faces and watering Complete.Spec. No.: Bd.G. 1 Page No. 313

Filling in plinth and floors with contractors soil sand or murum in 15 cm to 20cm, layers including watering and compaction complete.Spec. No.: Bd.A.11 Page No. 263

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, racking out joints, watering and scaffolding Complete. Spec. No.: Bd.G.5 Page No. 315

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete.Spec. No.: Bd. L.2 Page No. 368

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soiling 15 cm to 20 cm thick including hand packing and compacting complete.Spec. No.: Bd.A. 12 Page No. 264

Providing and fixing white glazed earthenware WashHand Basin of 45cm x 30cm size including cold waterpillar tap/cold and hot water pillar tap brackets, rubberplugs and brass chain, stop tap and necessary pipeconnection including P.V.C. waste pipe and trap up to theoutside face of the wall.Spec. No.: Bd.V.30 Page No. 565

Providing and fixing 8 cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. Spec. No.: Bd.V.32 Page No.567

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.Spec. No.: As directed by Engineer in charge.

Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying)

Providing and fixing Orissa type white glazed earthenware 580 x 440 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. Spec. No.: As directed by Engineer in charge.

Providing and fixing H.D.P container Sintex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres Spec. No.: As directed by Engineer in charge.

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.Spec. No.: BD.V 5 page 551 and as directed by Engineer in charge

Providing and fixing 20 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. Spec. No.: Bd.V.8 Page No. 554

Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.

"Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days complete.Spec. No.: Bd.0.8 Page No. 406

Providing and fixing M.S. grill door 24 kg/sqm of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc. Spec. No.: As directed by Engineer in charge.

Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 Kilogram/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the ' c ' channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos M.S.powder coated but hinges of size 100 mm x 25MM x 2mm using 32 mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing and fixing partition with kadappa stone of all sizes and 25 mm thick polished on both side and edges to original including fixing in position in cement mortor 1:4 curing polish- ing, cleaning etc complete

Quality Contaol. Test CC M20 Cube

Royalty

G S T Charges 18%

Add Contigensies 0.5 %

Item No:- 2 Excavation for foundation/ pipe trenches in hard scan inchhading removing the excavated material up to a dictanes of 50M and lifts as botes, stacking and spreading as directed by Engineer-in-charge normal dewatering, preparing the bed for foundation and excluding backfilling cac comelete (lift upto 0 1 to 1.5 M)

Item No:-3 Excavation for foundation/pipe trenches in soll rock and old cement and linne masenty foundation asphalt road including romoving the excavated material up to a distance of 50 meters and lis as below stacking and spreading as directed by Engineer-m-charge normal dewatering, preparing the bed for foundation and excluding backfilling, ete complete (lift upto 0 1 to 1.5 M)

Item No:-4 Providing and laying in sin cement concrete M 15/124 of wap/granite quartzite gneiss metal for foundation and bedding incinding baling cut water manually formwork, compacting and curing ste complete

Item No:-6 Filling in plinth and floors/trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-11/263)

Item No:-7 Providing and casting in situ CC of trap/granite-quartzite meiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering centering, form work, compaction, finishing the formed surfaces with CM 13 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening of special finssh is to be provided and curing, etc. complete For RCC Red Beam M 20

For RCC Vertical Wall M 20

Bottom Slab M 200

Top Slab M 200

Item No:- 8 Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation, slabs, beans, columns, canopies, staircases newels, chajjas, huntels, pardies copings, fins, arches, etc as per detailed designs, drawings and schedules, cutting, bending, hooking the hars, binding with wires or tack welding and supporting as required, etc. complete.(including cost of binding wire)

Item No:-9 Providing censent plaster 20 mm thick in two coat in cement plaster 1.5 without neeru finish to concrete or brick surfaces, in all position including scaffolding & curing etc complete.

Item No:-10 Providing and applying oil hound distemper of approved manufacture and of approved colour and shade to the pastered surfaces including scaffolding, brushing and brooming down etc complete.

Item No :-11 Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Item No:-12 Elbow 90 Deg. 75

G S T Charges 18%

Item No. 2 :- Excavation for foundation / pipe trenches in hard murum including removing the excavated material up to a distance of 50M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(lift 0 to 1.5M)

Item No. 3 :- Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) (lift 0 to 1.5M)

Item No. 5 :- Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-10/263)

Item No. 6 :- Providing and supplying in standard lengths ISI mark rigid unplasticised uPVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no.4985/1988 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores and including cost of jointing material i.e. solvent cement, etc. complete. 25 mm Dia. uPVC Pipe

Item No. 7 :- Lowering, laying and jointing uPVC pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, giving satisfactory hydraulic testing as per IS code, etc. complete. 25 mm Dia. uPVC Pipe

Item No. 8 :- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging etc. complete.

G S T Charges 18%

Item No. 2 :- Excavation for foundation / pipe trenches in hard murum including removing the excavated material up to a distance of 50M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(lift 0 to 1.5M)

Item No. 3 :- Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material up to a distance of 50 meters and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete (lift upto 0 to 1.5 M)

Item No. 4 :- Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction complete.

Item No. 5 :- Providing & supplying ISI standard R.C.C.pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, including all taxes (Central and local), inspection charges, transport to departmental stores/site, unloading and stacking etc 450 mm dia. RCC pipe class NP-II (2.5 M Length)

Item No. 6 :- Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour, giving hydraulic testing etc. complete as directed by Engineer-in-charge (For all class of Ipines) Collar Joints . 450 mm dia. RCC pipe class NP-II (2.5 M Length)

Item No. 7 :- Providing and constructing B./B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding additional excavation B.B. masonry in CM 1:5 cm thick precast RCC frames and cover etc. complete as directed by engineer in charge. Size 0.60 x 0.90 x 1.20 m

Item No. 8 :- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging etc. complete.

G S T Charges 18%