Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.6 LAccepted-AOC | ₹5.6 L Quoted ₹8.7 L | L1 | Accepted-AOC The rates quoted by the contractor are lowest, hence accepted. |
| 2 | L2₹9.4 LRejected-Finance | ₹9.4 L | L2 | Rejected-Finance The rates quoted by the contractor are on higher side, hence rejected. |
| 3 | L3₹12.1 LRejected-Finance LOWER DEVNAGAR VIKASNAGAR SHIMLA 09 | ₹12.1 L | L3 | Rejected-Finance The rates quoted by the contractor are on higher side, hence rejected. |
| Sl No | Description | Qty | Unit | Bhaw Singh Chauhan L3 | Devesh Thakur L2 | Manish Dharmaik L1 |
|---|---|---|---|---|---|---|
| 1.00 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material. Hard Roack blasting prohibited and their intermediate classification of soils including, dewatering wherever required, setting of to the required lines, levels as shown on the drawing and directed by the Engineer -in-charge at site, according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at approved dumping site Bharyal. including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required).All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation the usefull stones as per the direction of the Engineer-in-Charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges. | 5 | P.Cum | 450 ₹2,250 | 400 ₹2,000 | 348 ₹1,740 |
| 2.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 1.2 | P.cum | 4,800 ₹5,760 | 4,700 ₹5,640 | 4,650 ₹5,580 |
| 3.00 | Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 28 | P.sqm | 550 ₹15,400 | 500 ₹14,000 | 450 ₹12,600 |
| 4.00 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 4 | P.Cum | 6,100 ₹24,400 | 6,000 ₹24,000 | 5,550 ₹22,200 |
| 5.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 5.09 | P.Cum | 6,600 ₹33,594 | 6,500 ₹33,085 | 6,450 ₹32,830.50 |
| 6.00 | Supplying, filling, spreading & levelling stone boulders of size range 5 cm to 20 cm in recharge pit, in the required thickness, for all leads & lifts all complete as per direction of Engineer-in-Charge. | 7 | P.Cum | 2,300 ₹16,100 | 2,200 ₹15,400 | 2,100 ₹14,700 |
| 7.00 | Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 8.45 | P.Cum | 8,900 ₹75,205 | 8,800 ₹74,360 | 8,700 ₹73,515 |
| 8.00 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 13.6 | P.sqm | 1,200 ₹16,320 | 1,100 ₹14,960 | 1,000 ₹13,600 |
| 9.00 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 546.9 | P.Kg | 120 ₹65,628 | 110 ₹60,159 | 105 ₹57,424.50 |
| 10.00 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 92.61 | P.Kg | 135 ₹12,502.35 | 130 ₹12,039.30 | 125 ₹11,576.25 |
Tender Value
₹6.0 L
EMD Value
₹12,100
Closing Date
19 Feb 2026, 5:00 pmClosed
Executive Engineer R B MC Shimla
Executive Engineer R B MC Shimla
CO MC Qtr Opposite RBI below MC Parking Kasumpti ward No 28 Chhotta Shimla
2026_MC_128176_14
26 140dated19012026
Open Tender
Civil Works
60 days
Shimla
Please refer to tender documents
7 documents required · 7 mandatory
₹590
Executive Engineer R B MC Shimla
₹12,100
31 Mar 2026
11 Feb 2026
20 Feb 2026
11 Feb 2026
19 Feb 2026
11 Feb 2026
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material. Hard Roack blasting prohibited and their intermediate classification of soils including, dewatering wherever required, setting of to the required lines, levels as shown on the drawing and directed by the Engineer -in-charge at site, according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at approved dumping site Bharyal. including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required).All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation the usefull stones as per the direction of the Engineer-in-Charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Supplying, filling, spreading & levelling stone boulders of size range 5 cm to 20 cm in recharge pit, in the required thickness, for all leads & lifts all complete as per direction of Engineer-in-Charge.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class D/wood including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 40 mm thick 2nd Class D/Wood including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows ( area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick: Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wid e aperture including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : float glass panes 5.0 mm thick glass panes(weight not less then 12.5 kg per sqm) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
15 mm cement plaster in single coat on fair side of brick/Concrete /stone walls for interior plastering up to all floor level including arises internal rounded angles chamfers and or rounded angles not exceeding 80 mm in grith and finished even and smooth in cement motar 1:6 (1 cement : 6 Sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
6 mm cement plaster to celling in cement mortar 1:3 (1 Cement :3 sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :300x10 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing aluminium Handle, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 125 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/L Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Medium shade pigment using 50% Grey & 50% red including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and laying vitrified wall tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm Approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing high pressure PVC (B-Type) spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.110 mm dia including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.75 mm dia including carriage of materials within all leads lifts and other including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F PVC Plain Bend 110 mm (Heavy duty)including carriage of materials within all leads lifts and other including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete.110 mm dia including carriage of materials within all leads lifts and other including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F PVC Collar 100 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F PVC Door Tee 100 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F P.V.C. Plain Bend 75 mm (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F P.V.C Collar 75 mm (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing PVC offset 45 degree ISI marked including with adhesive 75 mm dia (finolex make) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing PVC floor trap D-plast or equivalent make approved by the Bureau of Indian Standard of self cleaning design including fixing with approved adhesive etc. complete . including cost of cutting making good in the walls and floors complete . 110x90 mm (One hundered ten into ninety millimetre) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F G.I union in GI pipe(15 mm nominal bore) (Heavy duty) including carriage of materials within all leads lifts and other including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F CP Brass Stop Cock 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F gun metal gate valve 15mm dia of approved quality including carriage of materials within all leads lifts and other including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing water closet squatting pan (European type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F CP Brass Bib Cock 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and otherincluding carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F CP Brass Angle cock 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing CP/ S.S grating 100 mm dia Approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and Fixing 32 mm dia PVC waste pipe for wash basin or sink approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing unplasticised P.V.C. Connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing PVC water storage tank syntax or equivalent three layer cost of connecting / tank nipples , making connection etc. 1000 litres capacity including all assecories. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing double scaffolding system (cup locktype) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Carriage of material by mechanical transport including Loading & unloading & stacking of Muck/Debries in approved M.C. Dumping site at bharyal (10 km) inc carriage of material in all leads and lift and others incidentail as per direction of Engineer-in-Charge
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.66 MB
Tendernotice_2.pdf
PDF • 0.70 MB
Tendernotice_3.pdf
PDF • 0.35 MB
BOQ_189546.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid