Temporary arrangement for Republic Day

Amount

Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m.

All kinds of soil

Finishing walls with Acrylic Smooth exterior paint of required shade :

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Polishing on wood work with ready made wax polish of approved brand and manufacture :

Old work

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:

One or more coats on old work

Finishing walls with Acrylic Smooth exterior paint of required shade :

Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work

Renewing glass panes, with wooden fillets wherever necessary:

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Providing and fixing wood work in post frames and trenching for making stages dias welcome gate etc. (Materials to be taken back by the contractor by dismantling /removing the same after the function)

Superior Hard Wood Category II (B).

Providing and fixing in position facias and eaves boards with 12 mm thick plywood conforming to IS: 303 of approved quality. (60 cm wide) (Materials to be taken back by the contractor by dismantling the same).

Providing and fixing plywood IS: 303 of different size and different thickness whever required screening all complete. (Material to be taken back by the contractor by dismantling the same).

06 mm thick plywood IS: 303

19 mm thick plywood IS: 303

Providing and fixing PVC Pipes of approved quality.

110 mm dia nominal bore.

Providing and fixing 110 mm dia PVC Plain bend of approved quality.

110 mm dia.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Fixing flag (2mtr x 1mtr) on G.I. pipe (1 inch) (Labour rate only).

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Materials to be taken Back by the contractor by dismantling/removing the same after the function).

Providing and fixing 60 cm wide, 45 cm overall semi-circular plain Aluminium sheet gutter with wooden brackets / support, including making necessary connections with rain water pipes complete. (Materials to be taken back by the contractor by dismantling /removing the same after the function)

Hiring of Diesel Road Roller 8 to 10 tonne with fule, for prade groung at Netaji Staidum

Providing and applying of Door mat of size 90"X60" of approved quality. As per direction of Engineer in Charge.

Providing and laying Red Carpet (Coir matt) of 0.90 mtr width.

Providing and laying Acrylic Synthetic Carpet (Colour Red)

Providing and laying white polyster cloth on LG dias including stiching all complete as per the direction of Engineer - in - charge.

SHRI BALAJI ENTERPRISES