GE/C-52/2024-25 INTERNAL GI/ CI FITTING, FLOORING, TILING AND JOINARY WORK, INTERNAL PERIODICAL SERVICES INCLUDING REPAIR/ REPLACEMENT OF SEWAGE LINE MANHOLE, RAIN WATER, EXTERNAL DRAIN AND MISC WORK AT CHURCH ROAD, ARTRUC AND CC HUT, GYM ROAD, CIU,

Amount

Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame).

Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame).

Taking down shutters of any description not exc 2 Sqm each.

M&L Mild steel frame work as in door chowkhats with angle iron welded together ends of angle shouldered and fixed to opening and welding 3 Nos mild steel butt hinges 100 mm size, and 6 nos hold fasts made out of FI 25x3 mm 30 cm long for fixing of chowkhats( Butt hinges paid sep) all as spd.

S&F 35 mm thick 2nd class hard wood glazed and skelton shutter devided into square with plain, chamferred or rounded sash bar and fitted with cut and mitred beads for securing glass, size of members as per SSS Part - I section 8 clause 8.24 (b).

S&F for 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides and fitted to chowkhats complete all as specified and directed.

Servicing and greasing of aluminium door including replacement nut , screws rubber gaskets, pivot, taper clip etc including taking down carefully of door shutter for replacing unserviceable parts/components by new parts /components for smooth functioning of door and refixing the same in existing opening/position, complete, all as specified and directed.

M&L aluminium alloy powder coated windows including aluminium coated frames silding track, bottom weighing not less than 1.015 kg/Rm ,sides and top not less than 0.826 kg/Rm double revated and 0.55 kg/Rm for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter silding type with aluminium sectins as per series-A (15mm) 3 track of jindal section number for silding windows with framed shutter including aluminium allow powder coated snap type beads handles with locking arrngement spring action and glazing clips joint cleats rubber gaskets etc inclding provision of 5.5 mm thick tinted frosted glass of superior quality and stainless steel jail including all standard fittings complete all as specified and directed.

M&L aluminium alloy powder coated door including frame and channel of section (Door frame single grove 101.6mm x44.45 mm x2.1,shutter top section 47.62mm x44.45x1.95mm thick shutter bottem vertical section 85 mm x44.45 mm x1.80mm yhick ,shutter middle section 83.50mm x 44.45 mm x1.80mm thick shutter glazing clips weighing not less than 0.097 kg/Rm as directed and approved by GE and as per IS specification including provn of 5.5mm thick tinted glass/12mm thick thick prelaminated particle board as required including sling bolt 300mm, alu hinges 150 mm, alu handle 150 mm ,tower bolt 150 mm , "SAMRAT" ,looking arrangement "GODREJ" rubber gasket and door stopper complete all as specified and directed.

S & F in repair Helical Door Spring MS of standard size with rail.

S&F in repair 100mm long brass 4 lever mortice lock, vertical type complete all as specified.

Dismantling wrought iron or mild steel work of any dscription not otherwise provided for complete all as specified and directed.

S & F in repair Steel window (Factory made) double rebate, with side hung, shutter incl hinges, tower bolt, steel handle and peg stay complete with glaze and gauge shutters (both are complete) devotailed or welded including making good to cutting holes with PCC 1:2:4 and complete finishing to cill and jamb corners with plaster and match all as specified.

S & F in repair mild steel framed work such as grillsn gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders freamed balusters, walk ways, railings, framework of watertanks and similar work including aldrop and hinges holdfast etc conforming to Fe 290. Gde-E-165.

S&F for fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame and fixing with ancher bolts all as specified and as directed.

30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.

S&F in repair Floor door stopper of aluminium alloy body and tongue, overall length of cover plate 150 mm , anodized, with hard drawn steel spring, fixed to shutters, complete all as specified and as directed.

Cutting holes in Cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 complete, all as specified and directed.

S&F aluminium body hydraulically Door closer regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed as in repairs complete, all as specified and directed.

S&F MS butt hinges medium weight 100 mm size fixed with MS screws.

S&F aluminium anodised barrel tower bolt extruded section 150 mm long and fixed with MS screws.

S&F 150 mm extruded aluminium alloy handle anodised fabricated type and fixed with mS screws.

S&F 300 mm extruded section aluminium alloy anodised, sliding door bolt with hasp and staple and fixing clip of sheet and fixing bolt and nut.

S&F for 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete fixed on wooden frame or on wall with wooden plugs and set in cement mortar all as directed.

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

Supply and fix figured glass pin head type 4mm thick ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/ spring clips wherever necessary, complete all as specified.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 15mm.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 20mm.

Supply and fix galvanized steel tubing, 15 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed.

Supply and fix galvanized steel tubing, 20 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed.

Cutting chases, pinning in, for brick walls built in cement mortar, making good to facings where required and pointing in cement mortar 1:3 or PCC 1:2:4 type B-O(using 12.5 mm graded aggregate) as required for conceled water tubing etc cutting not exc. 10 cm all as directed.

Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc up to 10m height complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete.

M&L for rendering 10mm thick in CM 1:6 other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete.

M&L for rendering 5 mm thick in CM 1:4 on ceiling other than fair faces of brick work or concrete surfaces finished without using extra cement complete.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of priming plastered and other surfaces with alkali resistant priming paint complete all as specifed as direted by Engr-in-charge.

M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of oil bound distemper over a 2-3 mm coat of wall care putty complete all as specified.

M&L preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for old decorated surfaces plastered or unplastered surface of wall by rubbing , brooming down,washing with water etc applying one coat of oil bond distemper on wall complete all as spcefied.

M&L for preparation of old decorated plastered surfaces of walls by rubbing , brooming down,washing with water etc and applying one coat of cement based paint complete all as specified and directed.

M&L preparation of Old or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified.

M & L for preparation of Old or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as spd.

Dismantling of wall/ceiling & cup board fibre pulp AC boards etc any thickness including cover fillets including fixture as necessary at site including frame work.

M and L Providing & Fixing False ceiling with semi perforated 12mm thcik micro tegular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and pattern having moisture content less than 2%,humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 475 (part-4)-1970 and light Code Description unit rate No 429 SUB HEAD :26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizoatal level suspended on interlocking metel T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm, vross-T of size 15x32nn of lenght 1200mm amd secondry itermediate cross-T of size 15x32 of lenght 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqm) ie. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of 24x24x0.40 mm of length 3000mm to be fixed on perimeter wall/partition with the help of plastic rawl pluhs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-charge.

Dismentling asbestos cement corrugated or semi corrugated sheets in roof fixed with L hook or cranked bolt.

Dismantling tunframed timber scantlings 40sq cm and over in section in any position all as specified and directed.

S & F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L rolled sections as in main and cross beams, hip and jack rafters; purlins, truss etc where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates all as specified and directed.

Demolition Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premiseof stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed.

M & L for coloured non skid ceramic tiles of size 300x300x 7-8mm as in floors, set and jointed in neat cement slurry as per manufacturers instructions and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:6, complete all as specified .

M & L for coloured ceremic tiles of size 600 x 600 x 9-10mm thick as in floor over 15mm thick screed bed 1:6 in cement mortar, set and jointed in white cement with pigment to match all as specified and directed.

M & L ceremic tiles coloured of size 600 x 100 mm x 9-10 mm thick on vertical surfaces as in skirting etc over 10mm thick backing coat in CM 1:4, set and jointed in white cement with pigment to match all as specified and directed.

M&L for glazed ceremic colour tiles (600x300x7mm) thick, in vertical surface etc set and jointed in neat slurry and pointed in white or coloured cement to match with tiles including 10mm thick rendering in cement mortar (1:6) complete all as specified and as directed.

Supply and fix vitreous china wash hand basin white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper and waste pipe & waste cupling including all necessary fitting and fixtures complete all as specified.

Supply and fix in repair waste pipe dia 32mm including all necessary fitting and fixtures complete all as specified.

S & F in repair for Aluminium drapery curtain Rod 25mm dia Powder Coated including wooden side caps, brackets, and rings @ 120mm c/c/ complete all as approved by Engineer-in-charge.

M&L for rotational moulded polyethylene water storage tanks white colour 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT float valve, lid tank cover for polyethelene and polyethylene ball including taking out existing unserviceable overhead tank of any description including fitting and fixtures complete all as specified.

M and L for rotational moulded polyethylene water storage tanks 1000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and nipple fixed in position, with 20 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description.

Cleaning of EWCs, IWCs, bottle traps, Nahani Traps, Gully traps and Floor traps etc and CI/PVC Pipes all types top to bottom including junctions etc, Cleaning of sewage line upto GT in the area of RRC and Zone B (Md accn and all types of Accn including multistory bldg ). complete all as specified and as directed.

Cleaning of GTs in the area of RRRC and Zone B (Md accn and all types of Accn) complete all as specified and as directed.

Cleaning of Manhole depth of 0.9 mtr and any size of MH in the area of RRRC and Zone B (Md accn and all types of Accn) and taking out sludge and depositing complete all as specified and as directed.

Cleaning of Manhole depth exc 1.2 mtr and above of any size of MH in the area of RRRC and Zone B (Md accn and all types of Accn) omplete all as specified and as directed.

Cleaning of Sewage line from GT to Ist Manhole in the area of RRRC and Zone B (Md accn and all types of Accn) complete all as specified and as directed. Note-cleaning of sewage line daimeter upto 100mm to 300mm.

Cleaning of sewage line n.exc 15mtr length in the area of RRRC and Zone B (Md accn and all types of Accn). complete all as specified and as directed. Note-cleaning of sewage line daimeter upto 100mm to 300mm.

Cleaning of Sewage line 0.00mtr to 10.00mtr in length in the area of RRRC and Zone B (Md accn and all types of Accn) complete all as specified and as directed. (Note :- This item will be measured if length exceed from 15.00mtr.and cleaning of sewage line daimeter upto 100mm to 300mm.

Cleaning of Sewage line 0.00mtr to 20.00mtr in length in the area of RRRC and Zone B (Md accn and all types of Accn) complete all as directed and as specified. Note :- This item will be measured if length exceed from 20.00mtr.and cleaning of sewage line daimeter upto 100mm to 300mm.

Cleaning of Sewage line 0.00mtr to 30.00mtr and onwards in length in the area of RRRC and Zone B (Md accn and all types of Accn) complete all as directed and as specified. (Note :- This item will be measured if length exceed from 30.00mtr.and cleaning of sewage line daimeter upto 100mm to300mm Note :- For execution of item from Srl No. 62 to 70 above Agency should deploy minimum of 04 Nos Safaiwala and 01 Nos Supervisors on all days of the month/year during the contract period including Sunday and Holidays so as to complaints are attended promptly within 02 hours so that health and life of troops and their families is not adversly affected. The contractor shall take immediate action to attend any complaint assigned to him through site order book/verbal instructions from Engineer-in-charge or on telephones, MES call centres/IVRS from occupants. In all cases he shall attend the complaints in the specified duration. Penalty for non attending Complaints:- (a) Complaint pending 3-24 hours - 500 Rupees per complaint.

M&L for complete removal exising teratment from old surface of wall by scrubbing with hard brushing, brooming down or steel wire brushing scraping down smook soot mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water & applying two coat of cement based paint complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar.

Supply and laying, DWCPE(SN8) 150 mm dia pipes and snap fit coupler incl testing and laid properly, jointed laid in teenches to a level on concrete bed complete all as specified.

Supply and laying, DWCPE(SN8) 200 mm dia pipes and snap fit coupler incl testing and laid properly, jointed laid in teenches to a level on concrete bed complete all as specified.

Demolation Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified .

M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in Cm 1:6 all as specified and directed.

Material and labour for brick work with sub class B bricks of old size, straight or curved on plan exc 6m mean radius in half brick walls, in CM 1:4 incl demolition of brick work built in cement mortar compolete all as specified and directed.

S & F in replacement precast fibre reinforced cement concrete Manhole cover including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 450mmx450mmx50mm omplete all as specified and as directed.

S & F in replacement precast fibre reinforced cement concrete Manhole/drain cover including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 1000mmx500mm x75 mm omplete all as specified and as directed.

Mechanically used water fitting Hydraulic pressure machine and water sucking hydraulic pressure machine jet press for cleaning of sewage line shall be used by the contractor as per direction of Engineer-in-Charge as on required basis. Job shall be completed to the entire satisfaction of GE. (Zone - B.)

M&L for cement concrete 1:3:6 type C-0, using 12.5 mm graded stone aggregate as in coping and similar work incl necessary form work to obtain a smooth finishes complete all as specified and as directed.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone agg as in foundations, filling and mass concrete complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories

S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamps etc including taking out/dismentling of old pipe complete all as specified.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamps etc including taking out/dismentling of old pipe complete all as specified.

S&F in repair PVC (SWR) bends any radius, 110 mm bore complete.

S&F in repair PVC (SWR) bends any radius, 75 mm bore complete.

S&F in repair PVC (SWR) Y and T, 110 mm bore complete.

S&F in repair PVC (SWR)Y and T, 75 mm bore complete.

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).

M&L Machine pressed precast concrete PU coated colour interlocking paver block any shape and size, with grey cement and pigment confirming to IS 5658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed.

M&L for sand filling under floor or in foundations including watering and consolidation.

Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed.

S&F Endura colours paving tiles 300cm X 300cm x 15-20mm double charged digital printed with gloss, polished matt finished jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 all as specified and directed.

Excavation in trenches n.exc 1.5 M wide & n.exc 1.5 M in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick in soil complete all as specified and directed.

Removing excavated material (Soil) to a distance n.exc 50 m and depositing where directed at alevel n.exc 1.5 m above the starting point complete all as specified and directed.

M & L for cleaning of building service tanks PVC n exc 500 ltrs capacity situated at various places through machenical tank cleaning process by involving the following five (5) stages of cleaning process shall be carried out as given below:- (a) De-watering PVC tank through was out pipe completely. (b) Total removal of sludges by suction pumps completely. (c) Cleaning of walls, ceiling and floor by high pressure jet of 80-180 bar pressure & inspecting for craks if any completely.(d) Removal of addl sludge by industrial vacuum pump completely. (e) Antibacterial treatment of inside of tank to make it completer bacteria free and completely. Note :- 1. The entire work should be carried out ty TANKCLEAN process by any franceised or M/S TANKCLEAN (Pvt) Ltd or any other MES approved firm having equivalent technology. 2 Entire T & P should be arranged by the contractor at their own. Only electric power & water shall be supplied by MES at stipulated rate.

All as per item No 98 above but PVC tank capacity not exc1000 ltrs.

Demolition of reinforced cement concrete in any position all as specified and as directed by Engineer -in-Charge.

M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, complete all specified.

Supply and fix welded steel wire fabric(MS Jali) fixed to steel members weight n. exc. 4 kg/sqm incl welding complete all as specified and directed.

M&L for cement concrete 1 : 4 : 8, type D2, using 40mm graded stone aggregates incl beding, packing under and haunching against the sides for 150MM internal dia of pipes, after they are laid and tested complete all as specified (thickness of concrete bed 100mm).

M&L for cement concrete 1 : 4 : 8, type D2, using 40mm graded stone aggregates incl beding, packing under and haunching against the sides for 200mm internal dia of pipes, after they are laid and tested complete all as specified (thickness of concrete bed 100mm).

M & L for 100 mm thick cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in sub base all as specified.

Schedule of Credit

a.k constructions (BID ID -3106427)

M/S Sunil Steel Works (BID ID -3100027)

VEDIT ENTERPRISES (BID ID -3108740)