Construction of New Anganwadi Building Near Panchayat Office Building in Melpalur Habitation at Melpalur Panchayat. (Demolished) (Survey No. 70/18) Under AGAMT-II - 2025-26

Amount

Construction of New Anganwadi Building Near Panchayat Office Building in Melpalur Habitation at Melpalur Panchayat. (Demolished) (Survey No. 70/18). in Kalasapakkam Block under AGAMT - 2025-26

Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil, hard stiff clay, black cotton soil, hard red earth,shales, murram, and earth muds with 50% fair sized boulders as per SS 20B for narrow foundation.

Collection and supply of gritty gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,

Supplying and filling in foundation, basement, etc with filling M.Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:4:8 mix using 40mm metal including cost and conveyanceof all materials to work site and all labour charges etc.

Brick work in C.M 1:5 mix using country bricks incuding cost and conveyance and all labour charges etc.

RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc.

Pedal

Column above Greade beam

Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc.

Centring Below GL

Column Below Gbeam

Column above Gbeam

Lintel bottom Sides

Shunshade

Supply and fabrication of steel including cost and conveyance and alla labour charges etc. complete.

Plain Cement Concrete 1:2:4 (one cement, two M.Sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental o

Weathering coarse concrete using 20mm size broken brick jelly with in pure slaked lime over the RCC Roof in the proportion of 32 : 12 1/2 by volume laid in layer beating the concrete with the wooden batters etc as per standard specifications .

Finishing the top of roof with one course of Pressed tiles conveyance of all materials to site and all labour charges etc complete for 10 Sqm

Plastering with cement mortar 1:4, 20mm thick including cost and conveyance and all labour charges etc.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Plastering with cement mortar 1:5, 12mm thick including cost and conveyance and all labour charges etc.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three M.Sand) 10mm thick including

Paving the floor with best approved quality fine polished shahabad stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Towards the cost of steel door of size 1.10 mx2.10 m including all charges etc.

Towards the cost of steel door of size 0.75mx1.8 m including all charges etc.

Towards the cost of steel door of size 1.10mx2.10 m including all charges etc.

Towards the cost of steel ventilator of size 0.9x0.45 m including all charges etc.

Towards the cost of steel Window of size 1.20mx1.30 m including all charges etc.

Towards cost and fixing of RCC Jolly of size 0.90x0.45m including cost and conveyance and labour for fixing etc

Labour charges for fixing of doors,windows and ventilator including all charges etc.

D-Doors

W-Window

Painting two coat with approved quality of distemper with colour over one coat of white cement for primier coat for the base including preparing surface and all materials cost labour etc

Painting two coat with ready mixed plastic emulsion of first quality paint and of approved colour over a priming coat including thorogh scarpping clean removal of dirt etc complete.

Special design Art work with first class quality emulsin paint BALA including wall putty ,Primng coat etc.complete .rate for 100 Sq.feet

Painting two coats using Ist quality readymix enamel paint of approved colour over new iron work including cost and conveyance and all labour charges etc.

Provision for electrification arrangements with service connection

Light point (SD20)

Fan point (SD20)

Fan (SD107)

Plug point (SD36)

CFL lamp (SD82)

Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket(SD142)

G I Pipe (SD69)

EB Deposite

Service Wire (SD64)

Bulk head fitting (SD84)

M-0821 Supply and providing 1000 litres capacity Priming Tank made up of PVC. Make: SINTEX / EQUIVALEN

Provision For Water Supply and Sanitary fittings Arrangements including Room inner and Extranl pipe lines.etc.

Provision For Meter Bord and electrial work Arrangements etc.

Cost & Supply For E. W.C with 10lit Flish tank including cost and conveyance of all materials to work site and labor charges etc complete.

Supplying and fixing Rcc ring,40mm metal in RWH structure etc., complete.

Provision for Hand Rail for SS Works

Supplying and fixing PVC Rain water down fall pipes of following dia meter etc., complete.

Provision for Name board

GST Amount for providing Service to Government Contract Works for the above Construction Works. {GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

MEGA STAR CONSTRUCTION (BID ID -1309958)