Karnataka

Active

Works

Buildings

Providing Water Proofing, Painting, Fly-Mesh, Door Repairs, Electrical & Other Repair Works To Lecturer Quarters (No-09) At Jnana Bharathi Campus, Bangalore University Bangalore

Bangalore University

Registrar Office Bangalore University | Bengaluru Urban, Karnataka

Amount: Refer DocsCloses: 6 Jul 2026

Tender Value

Refer Docs

EMD Value

₹15,800

Closing Date

6 Jul 2026, 9:30 pm

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Bangalore University

Work Description

Providing Water Proofing, Painting, Fly-Mesh, Door Repairs, Electrical & Other Repair Works

Tender Information

Tender ID

305262

Reference Number

BU/2026-27/BD/WORK_INDENT86

Tender Type

Open

Product Category

Buildings

Location

Registrar Office Bangalore University

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredAnnual Turnover Certificate certificate issued by Approved Chartered Accountant with UDIN i.e., 2021-22, 2022-23, 2023-24, 2024-25, 2025-26 as KW Doc - 6.30 Lakhs

RequiredKPWD Class-IV and above Registration Certificate

RequiredSimilar Work done certificate as per KW Doc 50 percent amount put to tender i.e., Rs.3.15 Lakhs certificate should be issued not below the rank of Executive Engineer

RequiredTotal value of Civil engineering works executed and payments received in the last five years

RequiredList of existing commitments and ongoing work

RequiredList of works for which tenders already submitted

RequiredBidder personal No., address and Banker details for communication

RequiredAssessed available tender capacity-AxNx2.5 -B should be greater than or equal to Rs.6.30 Lakhs

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

If any tenderer qoutes less than SR amount, he has to remitt the unbalanced tender amount in the form FDR in favour of Finance officer, Bangalore University has guarantee amount which will be refund after successful completion of work.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Contractor with Karnataka PWD Class-4 & above registration can be eligible for participation.

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Bidder mandating Satisfactorily completion as prime contractor for at least one similar nature of work of value not less than Rs.3.15 Lakhs (Updated to 2026-27 Price level) should be counter signed by the Employer in Charge not below the rank of Executive Engineer or Equivalent.

Tenderers should not be associated or have been associated in the past, directly or indirectly, with a firm or any of its affiliates which have been engaged by the Purchaser to provide consulting services for the preparation of the design, specifications, and other documents to be used for the procurement of the goods under this Invitation for Tenders.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non accessibility of Karnataka Public Procurement portal due to internet connectivity issues and technical glitches at bidders end.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. The cost of the Tender Processing shall not be refundable.

EMD should be paid as specified in the tender document available in Karnataka public procurement portal.

The EMD & Tender processing fee shall be paid through Karnataka public procurement portal only as per the e-procurement rules

The EMD and Security Deposit are liable to be forfeited as liquidated damages in the event of any evasion, refusal or delay on his/her part in signing the contract form. The other Terms and Conditions are as stipulated Standard Tender Document of Government of Karnataka

The Tenderers need to register with Karnataka public procurement portal and to obtain user ID and Password for participating in the Tender process

For any clarification refer the bid documents or contact University Engineer on all working days between 10.30 AM to 4.30 PM

Bidders should abide by other terms & conditions as prescribed in relevant KTPP rules, KTPP Act and standard tender document.

All the relevant Documents must be uploaded in Pdf and excel format only.

Bidder has to quote the rates excluding GST and The GST shall not be paid in the extended period of contract for which the Contractor alone is responsible for delay as determined by the authority while granting the extension of time. The Government and the Contractor are abide to any increase or decrease in GST during agreement period.

Should submit the Attested copy of the Turnover certificates of last 5 Finacial years (2021-22 to 2025-26) issued by the Chartered Accountant

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders

As per Government order LD/300/LET/2006 Bangalore dated 1.01.2007 nad Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval and all the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise tender will be rejected.

Materials required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work.

Contractor should adhere to HSE (Health Safety Environment) policy and Environmental policies applicable for the projects

Contractors are responsible for ensuring Safety and also whole & Sole responsibility for any injury or risk factors of workers

Contractor should take all precautions to ensure that no damage is caused to the existing public/ private properties which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value as mentioned in the Bid Doc.

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹15,800

Important Dates

Last Activity

19 Jun 2026

Published

19 Jun 2026

Download Ends

4 Jul 2026

BOQ Preview

•

Providing Water Proofing, Painting, Fly-Mesh, Door Repairs, Electrical & Other Repair Works To Lecturer Quarters (No-09) At Jnana Bharathi Campus, Bangalore University Bangalore

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Eng...

•

Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and si...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofi...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

•

Providing and fixing C.P brass long nose bib cock of approved quality conforming to Is standards and weighing not less then 810g. ---- With all lead and lift including cost and conveyance of all mater...

•

Providing and fixing brass stop cock of approved quality 15 mm nominal bore ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equip...

•

Providing and fixing unplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore: ---- With all lead and lift including cost and conveyance of all materials,labour, hire charge...

•

S.C.I. gully or nahani grating 100 mm dia ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incidental cha...

•

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 40 mm dia ---- With all lead and lift including cost and conveyance of all materi...

•

Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all lead and li...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

•

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, th...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

•

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 25mm nominal bore, weighing not less than 62 g ---- With all lead and lift including cost and c...

•

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all ...

•

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : chapter 13 volume 2 20 mm nominal bore ---- With all lead and lift including cost and ...

•

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : chapter 13 volume 2 25 mm nominal bore ---- With all lead and lift including cost and ...

•

Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A, including jointing with seal ringconforming to IS : 5382, leaving 10 mm gap for thermal expan...

•

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm ap...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

•

Open Conduit System: Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before con...

•

Point wiring using copper wire without switch: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5 Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi...

•

Point wiring using copper wire with switch: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5 Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multistr...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing flush mounting powder coated /galvanised metal box suitable formounting modular switch plates. The box should be firmly flush mounted after due cutting in Brick/Stone/C.C wall. 8 ...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing /replacing of 6/16/32 A Electrical Accessories on existing switch board. 6A SP Switch ---- With all lead and lift including cost and conveyance of all materials,labour, hire charg...

•

Supplying and fixing /replacing of 6/16/32 A Electrical Accessories on existing switch board. 6A Three Way 5 pin socket.

•

---- With all lead and lift including cost and conveyance of all materials,lab...

•

Supplying and fixing /replacing of 6/16/32 A Electrical Accessories on existing switch board. Electronic stepped Regulator ---- With all lead and lift including cost and conveyance of all materials,la...

•

Supplying and fixing /replacing of 6/16/32 A Electrical Accessories on existing switch board. 16 A SP Switch ---- With all lead and lift including cost and conveyance of all materials,labour, hire cha...

•

Supplying and fixing /replacing of 6/16/32 A Electrical Accessories on existing switch board. 16 A Three way 5 pin socket ---- With all lead and lift including cost and conveyance of all materials,lab...

•

Supplying of .feet - PVC Batten with integrated LED tube.W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V 50/60Hz & Power factor...

•

SFixing all types and all capacities of fluorescent /false ceiling/spot light/CFL/LED fittings indoor on the wall / ceiling/rafters /griders using 23/0.0076" twin twisted PVC insulated wires, required...

•

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power inpu...

•

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with wupplying and fixing a 5 A ceiling rose, necessary le...

•

Supplying, Wiring & Fixing Earth electrode for Grounding conduits,I.C.cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr. Long buried in a pit.The pit should b...

•

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm GI strip ---- With all lead and lift including cost and conveyance of all m...

•

1.1 KV XLPE or Heat esistant PVC insulated, PVC extruded Inner sheath armoured LT UG cable as per IS-1554 (Part-1) or IS-7098 Part-1, or IS-7098 Part-1, Armouring strip thicknessand resistivity as per...

•

Earth work excavation by manual means for drains,canals and similar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, c...

•

Laying of cable in Existing trench /GI pipe/Stone ware/RCC Hume pipe using wooden / Aluminium Rollers as directed by the departmental staff. LT cable 2.5 to 25 sq mm ---- With all lead and lift includ...

•

Supplying and fixing miniature circuit breakers/isolators on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross - 3 with short circuit...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW1 Doc LQ09.doc

Tender Document • 0.20 MB

TN TBC LQ09.doc

Instructions to Tenderers • 0.14 MB

Ready to Participate?

Download all tender documents and submit your bid