Major Repair of Girls Middle School Shalimar.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : of area of 3 sqm. and below.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown.

Brick work 7 cm thick with common burnt clay (non-modular) bricks of class designation 7.5 in cement mortar 1:3 ( 1 cement : 3 coarse sand) in superstructure above plinth level and upto floor V level including curing complete.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. Thermo mechanically treated bars of grade. Fe-500D or more complete.

Providing and fixing gang saw cut, mirror polished, pre moulded and pre polished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (Area of slab over 0.5 sqm).

Providing wood work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (KD / imported wood)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).

Providing and fixing 30mm wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge: Second class Kail wood.

Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 14587

Removal of existing paneling or paneling and glazing in panelled or panelled and glazed shutters for doors windows and clearstory windows including making necessary repairs and sizeing, MS butt hinges with nails and screws, wooden shash bar wherever required and fixing of same at required position complete.

Providing and fixing coloured aluminium fittings of standard quality complete.

a) Tower bolt 100mm.

b) Tower bolt 150mm.

c) Handle 125mm.

d) MS Butt Hinges 150mm.

e) Aldrop 200mm.

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall with clamps at 1.00 meter Spacing PN-16 pipe, 25mm OD (SDR-7.4)

Providing and fixing PVC pipes prince make including necessary fittings, bends, collars etc of standard quality.

a) 75mm pipe.

b) F trap.

c) Stainless steel sink 600x450mm of approved brand.

Providing and fixing C.P fittings of approved standard quality including cost and carriage complete.

a) C.P Bib cock.

b) C.P Nipple 50mm.

c) C.P grating.

d) Waste pipe.

e) C.P Angle valve.

f) C.P sink cock.

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : Upto 10 mm thick.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position: Budloo / Fir wood including cost of scaffolding cutting, making and placing in position complete job.

Providing and fixing of 12mm thick commercial ply conforming to IS: 1328 BWR type including the cost of nails screws.

Carriage of materials from source to site of work by mechanical means.

a) Stone aggregate for an avg. lead 30 Kms.

b) Sand for an avg. lead of 20 Kms.

c) Bricks for an avg. lead of 15 Kms.