REPAIR MAINT OF STREET LIGHTS SECURITY LIGHTS IN MD ACCN AREA BAIRAGARH UNDER GE BHOPAL

Amount

Taking down defective 40/150/250/400 Watt SV/MH Street light, security light, CFL/ Flourecent Tube light fittings (any type and any size), LED light any type, through ladder mounted on any type of poles/bldgs (up to 13 mtr height), on bracket disconnecting, testing all components, dismantling of defective components such as holder, choke, ignitors, holders, capacitors, lamps, driver (in case of LED light) replacing the defective components with new component, connecting electric supply cable with fitting, replacing of defective cable if required with new one of suitable size, including cleaning of cover, testing of fitting for its fuctioning and then refixing/ mounting it on its existing /new location, making electric connection, checking / testing for its fuctioning complete all as specified and directed. Note : (i) No T &P will be issued by the Department. (ii) Spares parts such as choke, ignitor, lamp holder, cable, lamps, etc shall be paid and measured separately. (iii) Rates also include repairing of defective street light timers, fault in street light feeders, etc (iv) During period of currency of CA any fitting will be not considered for more than once for payment purpose.

Taking down defective 150/250/400 Watt SV/MH lamp type light fittings (Aprox 6 to 9Nos), intregal/ non intregal type flood light fitting, aviation light, through ladder, mounted on semi high mast pole up to 12 mtrs height (above ground level) fixed on bracket/ round ring (cage), disconnecting, testing all components, dismantling of defective components such as choke, ignitors, holders, capacitors, lamps, replacing the defective components with new component, connecting electric supply cable with fitting, replacing of defective cable if required with new one of suitable size , including cleaning of cover, testing of fitting for its fuctioning and then refixing/ mounting it on its existing /new location, making electric connection, checking / testing for its fuctioningcomplete all as specified and directed. Note : (i) No T &P will be issued by the Department. (ii) Spares such as choke, ignitor, lamp holder, cable, lamps, etc shall be paid and measured separately. (iii) Rates also include repairing of defective street light timers, fault in street light feeders, etc (iv) During period of currency of CA any fitting will be not considered for more than once for payment purpose.

Taking down defective 150/250/400 Watt SV/MH lamp type light fittings ,(intregal/ non intregal type light flood light fitting),aviation light through ladder/motorised /manual system, mounted on 12 to 20 mtr long high mast pole (above ground level) fixed on bracket/ round ring (cage) , disconnecting, testing all components, dismantling of defective components such as choke, ignitors, holders, capacitors, lamps, replacing the defective components with new component, connecting electric supply cable with fitting, replacing of defective cable if required with new one of suitable size , including cleaning of cover, testing of fitting for its fuctioning and then refixing/ mounting it on its existing /new location, making electric connection, checking / testing for its fuctioning complete all as specified and directed. Note : (i) No T &P will be issued by the Department. (ii) Spares such as choke, ignitor, lamp holder, cable, lamps, etc shall be paid and measured separately. (iii) Rates also include repairing of defective street light timers, fault in street light feeders, etc (iv) During period of currency of CA any fitting will be not considered for more than once for payment purpose.

Supply only 400 watt. HPSV/MH open construction electromagnetic ballast consisting of high quality silicon steel lamination with argon welding, super enamelled copper wire, vacuum impriganated with white resin, terminal block with tapping for 220/240 volt supply, 50 Hz, complete all as specified and directed. Make : Wipro Cat No. WBS/H 56400, Bajaj Cat No. BJOS 400 SV/MH or equivelent in Philips / CG/ Havells

All as per item No 4.00 above but capacity 150 Watt complete all as specified and directed. Make : Wipro Cat No. WBS/H 57150SL31, or equivelent in Philips/CG/Havells.

Supply only MH lamp SE tubular suitable for integral / non integral street/flood light fittings of capacity 400 Watt complete all as specified and directed. Make: Wipro Cat Part No. WLH400 or equivelent in Philips/CG/Havells.

All as per item No 6.00 above but MH lamp of 150 Watt complete all as specified and directed. Make: Wipro Cat Part No. WLH150 or equivelent in Philips/CG/Havells.

Supply only HPSV lamp single /double ended tubular 150 watt complete all as specified and directed. Make: Wipro Cat Part No. WLT150 or equivelent in Philips/CG/Havells.

Supply only electronic ignitors suitable for 150/250/400 Watt SV/MH street light fitting 240V, 50HZ (For 5 mtr striking distance) complete all as specified and directed. Make: Wipro Cat Part No. WEH 24001, or equivelent in Philips/CG.

Supply only LED driver suitable for 45 watt LED light (to suit as existing) complete all as specified and directed. Make of Driver :Bajaj or equivelent in Wipro/ CG/Halonix

Supply only LED driver suitable for 25 watt LED light (to suit as existing) complete all as specified and directed. Make of Driver : Bajaj or equivelent in CG/ Wipro/Halonix

Supply only LED driver suitable for 70 watt LED light/Flood light (to suit as existing) complete all as specified and directed. Make of Driver : Bajaj or equivelent in CG/ Wipro/Halonix

Supply only LED driver for suitable of 100 watt LED flood light (to suit as existing) Make of Driver : Bajaj or equivelent in CG/ Wipro/Halonix

Supply only LED driver for suitable of 150 watt LED flood light (to suit as existing) of Mcomplete all as specified and directed. Make of Driver : Bajaj or equivelent in CG/ Wipro/Halonix

S&F in repairs twin core 4.0 sqmm PVC insulated and PVC sheathed stranded aluminium conductor complete all as specified and directed.

S&F in repairs Street light brackets made out of GI tubing, light grade, 32 mm bore 1200mm long, bent to shape at 120 degree, fixed on pole by providing MS clamp made up of flat iron 40 x 5 mm including bolts, nuts and washer of suitable size incuding painting the bracket & clamp with two coats of aluminium paint over a coat of primer complete all as specified and directed.

S&F in repairs IP65/IP66 Thermoplastic Polycarbonate cable Junction box for street lights; size not less than 210mm x 155mm x 102 mm with 25 sqmm terminal of 32 Amps rating for three phase & neutral mounted on din rail with locking arrangement fixed to PSC/Steel Poles by means of suitable size of clamps made of MS flat 20 x 4mm - 2 Nos with nut, bolts & double washers and including provn for fixing 01 No. single pole, MCB, 10 amps,10KA, ‘B’ series with ON/OFF flap complete all as specified and directed. Make :- Hensel Cat part No:- HENKF PJB-5 or equivalent as approved.

S&F in replacement Integral LED Street light luminaire of 30 W, comprising of pressure die cast housing with epoxy powder coated dark graphite grey colour finish, prismatic polycarbonate cover with individual LED lenses LED street light luminaires with IP 65 protection and with all fixing arangement , nuts, bolts and washer connecting to electric system with 1.5 sqmm PVC Aluminium stranded conductor 2 core of required length from light fitting to street light control box on pole, testing and completion, complete all as specified and directed. Make- Wipro Cat No. LR02-331-XXX-57-XX, or Equivalent in Philips/Havells.

S&F in replacement Integral LED Street light luminaire of 45 W, comprising of pressure die cast aluminium housing LED street light luminaire ,IP 66 protection and with all fixing arangement , nuts, bolts and washer connecting to electric system with 1.5 sqmm PVC Aluminium stranded conductor 2 coreof required length from light fitting to street light control box on pole , testing and completion, complete all as specified and directed. Make- Wipro Cat No. LR02-501-XXX-57-XX, or Equivalent in Philips/Havells.

S&F in replacement LED flood light luminaire 150 Watt with secondary optics made in pressure die cast housing & heat sink in aluminium extrusion with IP 66 protection and with all fixing arrangement, nut , bolt and washer connecting to electric system with 1.5 sqmm PVC Aluminium stranded conductor 2 core of required length from light fitting to street light control box on pole , testing and completion, complete all as specified and directed. Make- Wipro Cat No.LF20-192-060-57-XX or Equivalent in Philips/Havells.

S&F in replacement LED flood light luminaire 100 watt with secondary optics made in pressure die cast housing & heat sink in aluminium extrusion with IP 66 protection and with all fixing arrangement, nut , bolt and washer connecting to electric system with 1.5 sqmm PVC Aluminium stranded conductor 2 core of required length from light fitting to street light control box on pole , testing and completion, complete all as specified and directed. Make- Wipro Cat No. LF20-122-060-57-XX or Equivalent in Philips/Havells.

S&F in repair 3 Pole contactor of AC 3 rating 95 Amp, AC1 rating 160 Amp, type MNX 95, Aux cont 2NO +2NC, 3 Phase, 415 V, as per IS 13947-4-1, complete all as specified and directed. Make :- L&T Cat No. CS 94136 or equivalent in Siemens/ Schinder.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregates as in foundation filling and mass concrete complete all as specified and directed.

M&L making coping to the new/existing PCC/Steel Poles of size 600x600x450 mm above the GL with PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in mass concrete complete all as specified and directed. (Note :- Quoted rates deemed to be including for dismantling of broken copings)

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 16 sqmm, 4 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc including taking out old unserveciable cable, any type complete all as specified and directed. [MAKE:- POLYCAB /HAVELLS INDIA LTD/V-MARC as approved by GE]

All as per item No 25.00 above but 25 sqmm 3.5 core complete all as specified and directed.

All as per item No 25.00 above but 16 sqmm 2 core complete all as specified and directed.

All as per item No 25.00 above but 10 sqmm 2 core complete all as specified and directed.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for pole foundation, cable trench, etc and getting out in any type of soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed. at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. [Note:-Compacted/punned thickness shall be measured & paid]

Supplying and laying sub class 'B' bricks (modular) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed

S&F 40mm GI tubing light grade with all fittings as required for passing through cables under floors, along the wall or along the pole, etc with suitable size M.S.flat iron clamps incl nut,bolt and washer including taking down old rusted pipe complete all as specified and directed. [MAKE:-TATA / JINDAL / PRAKASH / SWASTIK as approved by GE]

S&F 50mm GI tubing light grade with all fittings as required for passing through cables under floors, along the wall or along the pole, etc with suitable size M.S.flat iron clamps incl nut,bolt and washer including taking down old rusted pipe complete all as specified and directed. [MAKE:-TATA / JINDAL / PRAKASH / SWASTIK as approved by GE]

M&L for Painting of steel pole (swan neck type or straight type) up to 12 mtr height with cross arms, clamp of any length and shape for LT overhead line/ for stree light with two coat of aluminium paint after scraching out old paint, cleaning and exiting surface rust free, preparation of the existing surface, including marking pole numbers in a 20 cm dia yellow circle with number writting with black synthetic enamel paint & painting strips in alternate from bottom to top with three strips of black synthetic enamel paint & two strips of white fluorescent paint (up to 1.5 mtr height) through out the circumference of pole ( width of each strip shall be of 30 cm), including one coat of lime wash on PCC copping of pole complete all as specified and directed.

M&L for Painting of LT PCC poles with strips in alternate from bottom to top (up to 1.5 Mtrs) with three strips of black synthetic paint & two strips of fluorescent white paint through out the circumference of pole ( width of each strip shall be of 30 cm), including one coat of lime wash on PCC copping of pole and two coat of aluminium paint to channels, cross arm, clamps and pipes fixed/ mounted on pole after scraching out old paint, cleaning and making exiting surface rust free, preparation of the existing surface, including marking pole numbers in a 20 cm dia yellow circle with number writting with black synthetic enamel paint complete all as specified and directed.

M&L for Painting of steel pole High mast Pole up to 13 mtr height with luminarie mounting ring with two coat of aluminium paint after scraching out old paint, cleaning and exiting surface rust free, preparation of the existing surface, including marking including one coat of lime wash on PCC copping of pole complete all as specified and directed.

Taking down u/s automatic street light switch and Supply, fixing testing and comissioning, of automatic street light switch of capacity 5 KW in three phase, using Nature switch for automatic switching of street lights based on LUX level of natural light. The sensor (nature switch) along with suitable power contractor, MCB and support terminals enclosed in pole/ wall mounted enclouser made of rust proof, electric shock proof, termite proof and FR grade SMC junction box (Make: Sintex) conforming to IP54, including mounting arrangement with suitable size of FI clamps 02 Nos with complete acessories complete all as specified and directed. Make:- KAKATIYA ENERGY SYSTEM LIMITED Model No. SWADEEP - 02EC5KW3P, The automatic switching unit shall comprising of following: (i) Contractor rating (AC3) 25Amp 4 Pole or 3 Nos 25Amp 1 Pole: Make : BCH/L&T/Schneider (ii) MCB 32Amps (SP),10 KA, 240 volts (SP 3Nos) Make : Schinder/ Legrand/ L&T (iii) NATURESWITCH-01 Make: KAKATIYA ENERGY SYSTEM LIMITED

Taking down u/s automatic street light switch and Supply, fixing testing and comissioning of automatic street light switch of capacity 5KW in single phase, using Nature switch for automatic switching of street lights based on LUX level of natural light. The sensor (nature switch) along with suitable power contractor, MCB and support terminals enclosed in pole/ wall mounted enclouser made of rust proof, electric shock proof, termite proof and FR grade SMC junction box (Make: Sintex) conforming to IP54, including mounting arrangement with suitable size of FI clamps 02 Nos with complete acessories complete all as specified and directed. Make:- KAKATIYA ENERGY SYSTEM LIMITED Model No. SWADEEP - 02EC5KW1P, The automatic switching unit shall comprising of following: (i) Contractor rating (AC3) single phase 50-60 Amp : Make : BCH/L&T/Schneider (ii) MCB 63 Amps(SP),10 KA ,240 volts. Make : Schinder/ Legrand/ L&T (iii) NATURESWITCH-01 Make: KAKATIYA ENERGY SYSTEM LIMITED

S&F in repair MCCB, 200 Amp, 4 Pole, 25 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , with thermal release range 160-200 Amp including spreader terminals and phase barriers complete all as specified and directed. Make L&T (d - sine) Cat No. CM90642OONO or equivelent in Schinder/ Legrand.

S&F in repair MCCB, 160 Amp, 4 Pole, 25 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , with thermal release range 125-160 Amp including spreader terminals and phase barriers complete all as specified and directed. Make L&T (d - sine) Cat No. CM90642OOMO or equivelent in Schinder/ Legrand.

S&F in repair MCCB, 100 Amp, 4 Pole, 25 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , with thermal release range 80-100 Amp including spreader terminals and phase barriers complete all as specified and directed. Make L&T (d - sine) Cat No. CM90642OOLO or equivelent in Schinder/ Legrand.

Dismantling of ACSR conductor of any type and size complete all as specified and directed.

M&L for providing ACSR overhead lines on existing LT PCC poles/steel tubular poles with aluminium conductor steel reinforced including straining properly on insulators and binding with aluminium binding wire complete after dismentling and taking down old ACSR conductor of any size and make, complete all as specified and directed. Size of new conductors Weasel/ ferret or Squirrel. [MAKE: ICC/BHARAT CONDUCTOR/ NICCO/ INDIAN ALUMINIUM CO]

M&L for cutting PCC/floor/road and making good to disturebed surface with and including PCC 1:3:6 after laying of pipe for laying cable inside of trench size not more than 0.30 x 0.30 m complete all as specified and directed.

M&L for tightening and re stringing of existing ACSR over head conductor of any size/type on HT/LT over head line with the help of rope/line wise and tighting the conductor to permissiable sag with and including new aluminium tape/aluminium wire complete all as specified and directed. (each conductor to be measured seperately)

S&F in repair Analog time switch (FM series) complete all as specified and as directed. Make : GIC/ L&T cat part NoAUTS01ANA00 or equivalent approved by GE.

Dismantling of LT insulator of any type any size complete all as specified and directed.

S&F pin type, porcelain, vitreous white/ brown insulator including one galvanized mild steel spindle, two galvanized iron washers and one galvanized iron nut, 150mm height, 150mm dia for 1100 volts grade complete all as specified and directed.

S&F shackle type, porcelain, vitreous, white, brown or green insulator including galvanized mild steel straps, washers, insulator bolts, washers and nuts; 75mm height, 90mm dia for 1100 volts grade complete all as specified and directed.

Schedule of credit (calculation will be done off line) Rs. 51010.00

PRAGATI ELECTRICALS AND ELECTRONICS

UMESH ENTERPRISES

M/S RAKESH TRADERS

M/S AUTOMATION AND SWITCHGEAR CONTROL

ENVIRO TECH SERVICES