Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.1 LAccepted-Finance VILLAGE ASTANDLI PO DOCHI TEHSIL JUBBAL DISTT SHIMLA H P | JUBBAL | SHIMLA | HIMACHAL PRADESH | L1 | Accepted-Finance Lowest Bidder | |
| 2 | L2₹4.3 L+₹22,734.60 (5.54%)Rejected-Finance HIMACHAL PRADESH HP | L2 | Rejected-Finance L2 | |
| 3 | L3₹4.5 L+₹37,439.40 (9.13%)Rejected-Finance VILL MEHAT PO KANSAR TEHSIL POANTA SAHIB DISTT SIRMOUR H P | SIRMOUR | HIMACHAL PRADESH | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | Laxman Singh L3 | AJAY KUMAR L2 | Mohit Khimta L1 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundations , trenches etc., in earth work , lift up to 1.50 metres. Stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm. (fifteen centimetres) layers , when required in to plinth and sides of foundations etc., conslolidating each of the disposited layer by ramming and watering and then disposing off all excavated soil as directed with in the load of 20 mtrs. Pick and Jumper work etc. complete as per the direction of the Engineer - in - Charge. | 713.25 | Cum. | 490 ₹3,49,492.5 | 450 ₹3,20,962.5 | 430 ₹3,06,697.5 Lowest |
| 2.00 | Providing and laying cement concrete 1:3:6 (1cement: 3 sand: 6 graded stone aggregate 40mm( Forty millimeter nominal size) and curing complete excluding cost of from work in foundation and plinth with in all leads & lifts as per entire satisfication of Engineer-in-Charge. | 0.38 | Cum. | 11,700 ₹4,446 | 11,500 ₹4,370 | 11,000 ₹4,180 Lowest |
| 3.00 | Providing and laying cement concrete 1:2:4 (1cement :2 Sand: 4 graded stone aggregate 20 mm (Twenty millimeter nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Suspended Floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever up to floor two level with in all leads and lifts as per the direction of the Engineer - in - Charge. | 0.22 | Cum. | 12,550 ₹2,761 | 12,500 ₹2,750 | 12,000 ₹2,640 Lowest |
| 4.00Providing and laying cement concrete 1:1:2 (1cement :1Sand: 2 graded stone aggregate 20 mm N/S) and curing complete excluding cost of form work and reinforcement for Rainforced concrete work in:- | ||||||
| 4.01 | Foundation and Plinth with in all leads and lifts as per the direction of the Engineer in Charge. | 0.24 | Cum. | 14,000 ₹3,360 | 13,500 ₹3,240 | 13,000 ₹3,120 Lowest |
| 4.02 | Walls (Any thickness) attached pillasters, pillasters, buttresses, beam girder and contilevers upto floor two level with in all leads and lifts as per the direction of the Engineer in Charge. | 0.52 | Cum. | 14,500 ₹7,540 | 13,500 ₹7,020 Lowest | 14,000 ₹7,280 |
| 5.00 | Providing and laying (porus) No fine cincrete 1:4 (1 cement: 4 graded stone agg. 40mm) and above and curing complete with weep holes or porus etc. with in all leads & lifts as per the entire satisfaction & direction of the Engineer Incharge. | 68 | Kg. | 107 ₹7,276 | 110 ₹7,480 | 100 ₹6,800 Lowest |
| 6.00Providing from work steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish i/c centering, shuttering, strutting and propping etc. with wooded battens & ballies, height of propping and centring below supporting floor to ceilling not exceeding 4 meters and removal of the same for in situ reinforced concrete and plain concrete work with in all leads aand lifts as per the direction of the Engineer in Charge. | ||||||
| 6.01 | Flat surfaces such as soffits and suspended floors, roofs landing and the like: Floors etc up to 200 mm in thickness with in all leads aand lifts as per the direction of the Engineer in Charge. | 0.72 | Sqm. | 660 ₹475.2 | 580 ₹417.6 Lowest | 600 ₹432 |
| 6.02 | Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttress, plinth and string couress and the like with in all leads aand lifts as per the direction of the Engineer in Charge. | 5.94 | Sqm. | 330 ₹1,960.2 Lowest | 350 ₹2,079 | 350 ₹2,079 |
Tender Value
₹5.2 L
EMD Value
₹10,350
Closing Date
30 Jun 2025, 11:00 amClosed
Executive Engineer
JSV Division Jubbal
Construction of RCC Spring Intake chamber 1 No and LJT of GI HDPE Pipes of various dia
2025_HPIPH_107754_7
JBL-SML-09-718
Open Tender
Civil Works
Item Rate
180 days
Mehana
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
₹10,350
22 Aug 2025
18 Jun 2025
30 Jun 2025
18 Jun 2025
30 Jun 2025
18 Jun 2025
Amount
Excavation in foundations , trenches etc., in earth work , lift up to 1.50 metres. Stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm. (fifteen centimetres) layers , when required in to plinth and sides of foundations etc., conslolidating each of the disposited layer by ramming and watering and then disposing off all excavated soil as directed with in the load of 20 mtrs. Pick and Jumper work etc. complete as per the direction of the Engineer - in - Charge.
Providing and laying cement concrete 1:3:6 (1cement: 3 sand: 6 graded stone aggregate 40mm( Forty millimeter nominal size) and curing complete excluding cost of from work in foundation and plinth with in all leads & lifts as per entire satisfication of Engineer-in-Charge.
Providing and laying cement concrete 1:2:4 (1cement :2 Sand: 4 graded stone aggregate 20 mm (Twenty millimeter nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Suspended Floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever up to floor two level with in all leads and lifts as per the direction of the Engineer - in - Charge.
Providing and laying cement concrete 1:1:2 (1cement :1Sand: 2 graded stone aggregate 20 mm N/S) and curing complete excluding cost of form work and reinforcement for Rainforced concrete work in:-
Foundation and Plinth with in all leads and lifts as per the direction of the Engineer in Charge.
Walls (Any thickness) attached pillasters, pillasters, buttresses, beam girder and contilevers upto floor two level with in all leads and lifts as per the direction of the Engineer in Charge.
Providing and laying (porus) No fine cincrete 1:4 (1 cement: 4 graded stone agg. 40mm) and above and curing complete with weep holes or porus etc. with in all leads & lifts as per the entire satisfaction & direction of the Engineer Incharge.
Providing from work steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish i/c centering, shuttering, strutting and propping etc. with wooded battens & ballies, height of propping and centring below supporting floor to ceilling not exceeding 4 meters and removal of the same for in situ reinforced concrete and plain concrete work with in all leads aand lifts as per the direction of the Engineer in Charge.
Flat surfaces such as soffits and suspended floors, roofs landing and the like: Floors etc up to 200 mm in thickness with in all leads aand lifts as per the direction of the Engineer in Charge.
Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttress, plinth and string couress and the like with in all leads aand lifts as per the direction of the Engineer in Charge.
Providing and fixing MS Sheet Man hole cover with locking arrangement including lock, nuts & bolts & other fittings complete with in all leads & lifts as per the entire satisfaction & direction of the Engineer Incharge.
Providing and laying (porus) No fine cincrete 1:4 (1 cement: 4 graded stone agg. 40mm) and above and curing complete with weep holes or porus etc. with in all leads & lifts as per the entire satisfaction & direction of the Engineer Incharge.
Providing and placing horizontal layers filtering media duly graded screened washed and cleaned as specified by the Engineer Incharge with in all leads and lifts.
Bajri 6mm to 20mm
Bottom layer broken stone 3mm to 6mm
Laying , jointing and testing in trenches Galvanised Mild Steel tube of the following dia metres including smooth bending by necessary bends, or through pipe bending machine with necessary all pipe fittings such as Tees, Elbows, Union & Reducers etc. of ISI marked & testing for leakage complete with in all leads & lifts as per entire satisfication of Engineer - in - charge. (Earth work in trenches to be measured and paid for separately)
15mm dia.
25mm dia.
Providing, laying , jointing and testing in trenches HDPE pipes of the following dia metres including smooth bending by necessary bends with necessary all pipe fittings such as Tees, Elbows, Union & Reducers etc. of ISI marked & testing for leakage complete with in all leads & lifts as per entire satisfication of Engineer - in - charge. (Earth work in trenches to be measured and paid for separately)
25 mm dia, Class PE-63, PN-8.0, SDR-11.
Providing and replacing of copper alloy gate valves (Heavy Duty) ISI marked with in all leads and lifts as per direction of Engineer-in-Charge.
15mm dia.
25 mm dia.
AJAY KUMAR (BID ID -529408)
Laxman Singh (BID ID -529438)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .