Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.5 LAccepted-AOC VILL JAUNI P O GRONG TEH KOTKHAI DISTT SHIMLA | SHIMLA | HIMACHAL PRADESH | 170009 | ₹6.5 L Quoted ₹7.1 L | L1 | Accepted-AOC The rates quoted by the contractor are lowest, hence accepted. |
| 2 | L2₹8.0 LRejected-Finance LOCATION HIMACHAL PRADESHHPLA | UNA | HIMACHAL PRADESH | 174301 | ₹8.0 L | L2 | Rejected-Finance The rates quoted by the contractor are on higher side, hence rejected. |
| 3 | L3₹9.5 LRejected-Finance R O NAYA PANJOR P O HALLAN TEH SHILLAI DISTT SIRMOUR WARD NO 2 | SIRMAUR | HIMACHAL PRADESH | 171226 | ₹9.5 L | L3 | Rejected-Finance The rates quoted by the contractor are on higher side, hence rejected. |
| Sl No | Description | Qty | Unit | mukul thakur L2 | VIRENDER BANSHTU L1 | PRAKASH SHARMA L3 |
|---|---|---|---|---|---|---|
| 1.00 | 15 mm cement plaster in single coat on Rough side of brick/Concrete /stone walls for interior plastering up to all floor level including arises internal rounded angles chamfers and or rounded angles not exceeding 80 mm in grith and finished even and smooth in cement motar 1:6 (1 cement : 6 Sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 141.54 | P. Sqm | 400 ₹56,616 | 390 ₹55,200.60 | 450 ₹63,693 |
| 2.00 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Second class D wood including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 0.34 | P.Cum | 1,20,000 ₹40,800 | 1,15,000 ₹39,100 | 1,25,000 ₹42,500 |
| 3.00 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 500x500 mm Approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 25.58 | P.Sqm | 1,600 ₹40,928 | 1,530 ₹39,137.40 | 1,700 ₹43,486 |
| 4.00 | Providing and Fixing plain square edged cover fillets 40mmx12mm section with wood screws in ceiling and lining including 1st class D/wood including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 37.38 | P.Rmt | 180 ₹6,728.40 | 170 ₹6,354.60 | 200 ₹7,476 |
| 5.00 | Providing and Fixing ply wood liling with butt jointing and nails (frame to be measured and paid for seprately ) 6mmthick including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 45.84 | P.Sqm | 1,500 ₹68,760 | 1,350 ₹61,884 | 1,600 ₹73,344 |
| 6.00 | P/F Pine wood Planks for Ceiling & Panelling 0.10 to 0.12mm thick with Planks over Lapping each other and jointed with screws (framed work to be Paid seprately) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 43.81 | P.Sqm | 3,000 ₹1.3 L | 2,550 ₹1.1 L | 3,400 ₹1.5 L |
| 7.00 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 74.01 | P.Sqm | 120 ₹8,881.20 | 110 ₹8,141.10 | 130 ₹9,621.30 |
| 8.00 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 74.01 | P.Sqm | 120 ₹8,881.20 | 110 ₹8,141.10 | 130 ₹9,621.30 |
| 9.00 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 565.91 | P.Kg | 120 ₹67,909.20 | 110 ₹62,250.10 | 130 ₹73,568.30 |
| 10.00 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m² including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. | 14.76 | P.Rmt | 2,000 ₹29,520 | 1,000 ₹14,760 | 3,000 ₹44,280 |
Tender Value
₹6.6 L
EMD Value
₹13,100
Closing Date
5 Dec 2025, 5:00 pmClosed
Executive Engineer R B MC Shimla
Executive Engineer R B MC Shimla
C O ward office councillor room over existing toilet near Lower Kaithu in ward No 3 Kaithu Additional work
2025_MC_121845_5
2555dated17112025
Open Tender
Civil Works
90 days
Shimla
Please refer to tender documents
7 documents required · 7 mandatory
₹413
Executive Engineer R B MC Shimla
₹13,100
16 Mar 2026
27 Nov 2025
6 Dec 2025
27 Nov 2025
5 Dec 2025
27 Nov 2025
Amount
15 mm cement plaster in single coat on Rough side of brick/Concrete /stone walls for interior plastering up to all floor level including arises internal rounded angles chamfers and or rounded angles not exceeding 80 mm in grith and finished even and smooth in cement motar 1:6 (1 cement : 6 Sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Second class D wood including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 500x500 mm Approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and Fixing plain square edged cover fillets 40mmx12mm section with wood screws in ceiling and lining including 1st class D/wood including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and Fixing ply wood liling with butt jointing and nails (frame to be measured and paid for seprately ) 6mmthick including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
P/F Pine wood Planks for Ceiling & Panelling 0.10 to 0.12mm thick with Planks over Lapping each other and jointed with screws (framed work to be Paid seprately) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m² including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete : 1.60 mm thick with zinc coating not less than 275 gm/m² including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing &Fixing BP sheets 1.66mm to 2mm thick in ever board/facial/soffits ceiling i/c cutting fixing and welding to steel work.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing aluminium Handle, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 150 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing aluminium Handle, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 125 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :300x10 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing aluminium handles hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 As Per is 1868) transparent or dyed to required colour and shade with necessary screws etc complete single rubber stooper including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Providing and fixing 0.63mm thick prepained steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 mircons over 5 mircons primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
Carriage of material by mechanical transport including Loading & unloading & stacking of Muck/Debries in M.C. Dumping site at bharyal free of cost Tansporation charges will be paid extra (10km) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.
mukul thakur (BID ID -589977)
PRAKASH SHARMA (BID ID -589981)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.74 MB
Tendernotice_2.pdf
PDF • 0.70 MB
Tendernotice_3.pdf
PDF • 0.35 MB
BOQ_178764.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid