Procurement of Cement and Soil testing laboratory equipments for CLSRP works under UI Right Canal Division No-I, Mukhiguda for the year 2018-19.

Amount

Mould, Steel, for 70.6mm cube

Standard Sand Grade-I,II & III

Measuring Cylinder,Glass, Graduated,Capacity 250ml

Measuring Cylinder, Glass,Graduated,Capacity 100ml

Measuring Cylinder,Glass, Graduated, Capacity 50ml

Compaction Test Apparatus for light compaction

Compaction Test Apparatus for heavy compaction

Moisture Content Tin, Size 65mm dia x 20mm deep

Moisture Content Tin, Size 90mm dia x 20mm deep

Sample Tray (Enamel Tray), Size 300x250x40mm

Sample Tray (Enamel Tray), Size 200x150x30mm

Sample Tray, GI, Size 450x450x50mm

Electronic Balance, Capacity 10kg x 0.5g

Electronic Balance, Capacity 220 g x 0.001g

Physical Balance, Capacity 200g x 0.1mg with weight box

Core Cutter

Speedy Moisture Meter, Range 0-25% (Gauge Div.:0.5%) with digital weighing balance

Laboratory Electric Oven, Digital Indicator Cum Controller with Safety Alarm, Range 50°C to 300°C +/- 1°C with Air Circulating Fan, S.S Inside, Size 450x450x450mm

Aggregate Impact Tester

Los Angeles Abrasion testing machine with Counter Los Angeles Abrasion Testing Machine , Ref. Standards - IS:10070 Machine consisting of hollow steel cylinder arranged for rotating about its axis in a horizontal position closed at both ends, having an inside diameter of 700 mm and an inside length of 500 mm. Steel wall thickness:-12mm thick, Filler plate thickness:-12mm+thickness of gasket. Stud staff made of mild steel, cover for opening made of mild steel(240X6mm).Shelf made of mild steel wide:-90+/-2mm ,Thick 25+/-1mm, 500mm long, ball bearing heavy duty having 50mm bore. Drive should be by means of a chain running over a sprocket on the stub shaft and a sprocket on the shaft of a gear box coupled to a motor ( 1 hp, 3 phase, 1 440 rpm ). A clutch shall be provided. A revolution counter shall be provided to indicate the number of revolutions. The rate of rotation of the cylinder shall be 30-33 rpm. Frame Stiffness:-Approx 100kn/mm Material of Construction: Special quality low carbon mild steel (Carbon-16%-17%) Paint quality:-Powder coating 70-80 micron thick Counter sensor must be non contact type. Abrasive Charge - The abrasive charge shall consist of 12 cast iron spheres 48 +/- 2 mm in diameter and each weighing between 390 and 455 g and a total of 12 numbers of spheres weighing 5 000 +/- 25 g shall be supplied

COMPRESSION TESTING MACHINE - 1000 KN-HAND OPERATED -CHANNEL MODEL Model No. : TM-042H.1000.0 HSN : 90248099 Details Specification as follows and refer the catalogue.

Concrete test Hammer with NCCBM Calibrated Ref Standard:- IS 13311-1992(Part 2) & ASTM C805, D5873 Measuring range:-10 to 70 N/mm2, Impact Energy :- 2.207Nm

Sample Tray, GI, Size 450x450x50mm

Sample Tray (Enamel Tray), Size 300x250x40mm

Sample Tray (Enamel Tray), Size 200x150x30mm

Sample Tray (Enamel Tray), Size 650x500x50mm

Sample Tray (Enamel Tray), Size 600x450x50mm

Density Basket

Pycnometer

Brass Sieves 20cm dia: 4.75, 2.36,1.18,600microns, 300microns & pan cover

EIE INSTRUMENTS PVT LTD