Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.0 LAdmitted-Finance | ₹4.0 L | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | MAGESH R L1 |
|---|---|---|---|---|
| 1.00Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. | ||||
| 1.01 | All kinds of soil. | 1 | Cum | 350 ₹350 |
| 2.00Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : | ||||
| 2.01 | All kinds of soil -Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | 4 | metre | 400 ₹1,600 |
| 3.00Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | ||||
| 3.01 | 1:2:4 (1 cement:4 M sand:8 graded stone aggregate 40mm nominal size) | 0.25 | cum | 12,500 ₹3,125 |
| 4.00Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | ||||
| 4.01 | 1:5:10 (1 cement : 5 M sand : 10 graded stone aggregate 40 mm nominal size derived from natural sources) | 0.25 | Cum | 8,500 ₹2,125 |
| 5.00Centering and shuttering including strutting, propping etc. and removal of form for : | ||||
| 5.01 | Foundations, footings, bases for columns | 5 | Sqm | 500 ₹2,500 |
Tender Value
₹4.0 L
EMD Value
₹8,053
Closing Date
31 Jan 2026, 6:00 pmClosed
EXECUTIVE ENGINEER CIVIL
Executive Engineer (C), BSNL Civil Division MM Nagar, Third floor, BSNL Telelphone Exchange, No.99.JN Salai, KK nagar,Chennai 600078.
Annual periodical Maintenance to staff quarters at CIT nagar, Chennai for the period 2025-26
2026_BSNL_264063_1
33/BSNL/CDMMN/CHN/2025-26
Open Tender
Civil Works - Buildings
91 days
CHENNAI
As per tender document
3 documents required · 3 mandatory
₹590
BSNL, CHENNAI TELEPHONES
₹8,053
2 Feb 2026
22 Jan 2026
2 Feb 2026
22 Jan 2026
31 Jan 2026
22 Jan 2026
All kinds of soil.
All kinds of soil -Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
1:2:4 (1 cement:4 M sand:8 graded stone aggregate 40mm nominal size)
1:5:10 (1 cement : 5 M sand : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
Foundations, footings, bases for columns
Cement mortar 1:6 (1 cement : 6 M sand)
Cement mortar 1:6 (1 cement : 6 M sand)
Granite stone slab of required colour
Granite work
Providing and laying Joint free Ceramic glazed Antiskid floor tiles of size 300x300 mm of approved make and colours, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 M sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
Providing and fixing joint free ceramic glazed wall tiles of size 300 x 450 mm of approved make and colour as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 M sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing the joints with white cement mixed with pigment of matching shade complete.
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm
Door size upto 0.80 x 2.10 metre with necessary fittings
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Single tee with door 75x75x75 mm
Single tee with door 110x110x110 mm
Bend 87.5° , 75 mm dia
Bend 87.5° 110 mm dia
Shoe (Plain) 110 mm dia
12 mm cement plaster of mix : 1:6 (1 cement: 6 P sand)
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 P sand)
6 mm cement plaster of mix : 1:3 (1 cement: 3 P sand)
Two or more coat applied @ 1.67 ltr/ 10 sqm
Two coats on old work
One or more coats on old work.
Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge. (a) Internal Work- Exposed on wall
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead
Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
Of area 3 sq. metres and below
Of area 3 sq. metres and below
For thickness of tiles 10 mm to 25 mm
75 to 80 mm dia pipe.
15 mm to 40 mm nominal bore
Kitchen sink with drain board 510x1040 mm bowl depth 250 mm.
W.C. pan with ISI marked white solid plastic seat and lid
White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
Semi rigid pipe - 32 mm dia
Rectangular shape 453x357 mm
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
15 mm nominal bore.
45 cm length 15 mm nominal bore
150 mm diameter
Circular type. 100 mm nominal dia.
20 mm nominal outer dia .Pipes.
25 mm nominal outer dia .Pipes.
40 mm nominal outer dia. Pipes.
40 mm nominal outer dia. Pipes.
Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includesmaking necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.
Providing and laying brick jelly lime concrete on terrace / sunken floors with graded brick aggregate 25mm nominal size and 50% mortar comprising 1 lime putty ; 2 surki upto floor VII level
12 mm cement plaster mixed with water proofing compound finished with a floating coat of neat cement of mix 1:4 ( 1 cement: 4 P sand).
Bars upto 12 mm diameter
Dismantling of Wash basin, Water closet and sink of all types including necessary earth work, stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
75 mm diametre
110 mm diameter
75 mm diametre
110 mm diameter
Providing and fixing PVC floor trap of self cleansing design including cost of cutting and making good the walls and floors :
15 mm nominal bore
15 mm nominal bore
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 M sand with polymer minimum 2% by wt. of cement used) as per specificationscomplete, including disposal of rubbish to the dumping ground within 50 metres lead: and directions of Engineer-in-charge.
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. holder clamp to Eureopean type W.C. of Parryware / Hindware or equivalent make as approved by Engineer - in - charge.
Cutting the branches of trees hanging over the terraces at required point in the tree, cutting the cut branches into small pieces for easy loading and including disposal of the same out side the quarters complex. A) branches of girth upto 40cm
Removing and refixing the wooden door shutter after attending necessary repair etc., including sawing sides of shutters, door frames for making it operational condition all as per the direction of Engineer-in-charge.
25mm average thickness
Bars upto 12 mm diameter
Bars above 12 mm diameter
SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer.
12 mm average thickness
25 mm average thickness in 2 layers.
50mm thick in Grade M 25 with cement content not less than 330 kg per cum
Edge finishing of RCC chajja/fins / brick masonry plastering upto 50mm width including rounding/chamfering wherever required, plastering with cement mortar 1:3 etc. complete as per direction of Engineer-in-charge
Cleaning of terrace/loft water storage tank (inside surface area) upto 500 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)
Size 3.65x1.75 depth 3.00m (34000 litres)
Size 2.10x3.00 depth 3.00m (19000 litres)
Size 3.20x2.75 depth 2.50m (44000 litres)
Cleaning and de-silting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge.
Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial de-silting of manholes and de-chocking of sewer lines. De-chocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia for all depth.
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared.
Providing and fixing polyethylene New cover with locking arrangements upto 2000 litres capacity for polyethylene water tanks wherever required for missing/damaged including necessar bolts and nuts at all level etc., complete.
Applying crack filling compound of approved make (Crack seal of Asian Paints or Dr Fixit 201 Crack X Paste or equivalent) in wall cracks and finishing the surface level all complete.
Window shutters
Cycle shed above area upto 50 sqm
Residential complex upto terrace area of 200 Sqm.
Removing the bibcock / stop cock/pillar cock/Wheel valve(all sizes) and refixing after checking, cleaning and providing new washers or teflon tape roll (for valves) etc. as directed by the Engineer in Charge.
W/B bracket
Sink bracket
Internal work
External work (by earth work & refilling)
110mm dia
15mm nominal bore
20mm nominal bore
40mm nominal bore
Dismantling the existing damaged cuddapah stone slab over the kitchen platform including cleaning the mortar below the slab and disposal of material within 50m lead.
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 100gms.
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead:
Providing and fixing 600 x 450 mm mirror of approved quality with PVC beading alround neat complete.
Repairs to walls of manholes by dismantling old plaster in the outer surface /inner surface of the manhole and finishing with cement mortar 1:6 (1 cement: 6 fine sand ) neat complete.
Rectangular shape 600x450 mm internal dimensions
Rectangular shape 300x300 mm internal dimensions
Best available country wood
30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
Best available country wood 30mm thick
Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20nn nominal size)
Type I/II quarters
Float glass panes of thickness 4 mm
Providing and fixing white vitreous china WC trap including jointing to orissa pattern WC pan etc. complete all as directed by the E in C.
Demolishing lime concrete manually / by mechanical means and disposal of material within 50 m lead as per direction of Engineer in charge.
40 mm thick with 20 mm nominal size stone aggregate.
25 to 40 mm nominal bore
C. P brass Bibcock/stopcock/pillar
G.I pipes
CREDIT for taking back the old dismantled C.I pipes
Door and windows
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.79 MB
AMCcitTender.pdf
Tender Documents • 0.77 MB
BOQ_306344.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid