PROVISION OF UNIT SHOPS FOR FOOD STALL AND WET CANTEEN, GEYSERS FOR OFFICERS, JCO AND ORS, CEILING LIGHTS AT OFFICE LIBRARY, MESS AND CHIMNEY FOR OR COOKHOUSE AND BATHING POINT NEAR SINGLE JCO ACCN OF AD REGT AT NMS UNDER GE (P) KOLKATA.

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in Soft / Loose soil complete all as specified and as directed.

M & L for hardcore of gauge not exceeding 63 mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface in broken boulder complete all as specified and as directed.

M & L for PCC 1:4:8, Type D-2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings etc complete all as specified and as directed.

M & L for RCC M-25, using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.

M & L for RCC M-25, using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts etc complete all as specified and as directed.

M & L for RCC M-25, using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed.

Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits [if any] of foundation and plinth beams and similar work, vertical or to batter for rough finished surfaces complete all as specified and as directed.

Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions of any shape / cross section for fair finished surfaces of concrete complete all as specified and as directed.

Use and waste of form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc, splays between floors and beams and similar works for fair finished surfaces of concrete complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.

Removal of excavated material [Soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

S & F reinforcement using TMT steel bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

S & F reinforcement using TMT steel bars of 5mm to 10mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

M & L for brick work with fly ash bricks, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed.

M & L for brick work in half brick thick walls using fly ash bricks straight or curved on plan to any radius built in Cement Mortar 1:4 complete all as specified and as directed.

M & L for rendering to brick / concrete surfaces, 10 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering to brick / concrete surfaces, 10 mm thick in Cement Mortar 1:4, surfaces of any description for receiving tiles complete all as specified and as directed.

M & L for rendering to brick masonry surfaces / concrete surfaces other than fair face of wall , 15 mm thick in Cement Mortar 1:4, surfaces finished with sponge finish complete all as specified and as directed.

M & L for preparing newly plastered wall surfaces and applying two coats of oil bound distemper over one coat of chalk whiting primer complete all as specified and as directed.

M & L for preparing newly plastered wall surfaces and applying three coats of white washing complete all as specified and as directed.

M & L for preparation of newly plastered wall surfaces and applying two coats of Cement Based paint complete all as specified and as directed.

M & L for 75mm thick, PCC 1:3:6, Type C-1, using 20mm graded aggregate as in Plinth protection etc surface finished even and smooth with out using extra cement complete all as specified and as directed.

M & L for 100 mm thick, PCC 1:4:8, Type D-2, using 40mm graded aggregate as in Sub base for flooring complete all as specified and as directed.

M & L for 100 mm thick, PCC 1:2:4, Type B-2, using 40mm graded aggregate as in any paving area complete all as specified and as directed.

M & L for Non Skid Ceramic Tiles, Coloured, of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer complete all as specified and as directed.

M & L for Glazed Ceramic Tiles, Coloured, First Quality, of size 350 mm X 250 mm, 7 mm thick / 450 mm X 350 mm, 7 mm thick as in Vertical Surfaces such as Skirting, Dado etc set and jointed in neat cement slurry, finished with flush pointing in white cement or coloured cement to match complete all as specified and as directed.

M & L for screed bed or bedding layer, 15 mm thick in Cement Mortar 1:6 on floor for laying floor finish complete all as specified and as directed.

S & F Powder coated anodised Aluminium Frame for Shutters, windows, ventilators with one or more rebates including jointing cleat, glazing clips, rubber beading etc for fixing complete all as specified and as directed.

S & F Anodised Aluminium Powder Coated [Minimum 50 Micron thick] Sections as in windows, ventilators shutters side hung type with out sash bars, Aluminium section weighing 0.55 KG / RM including necessary Joining Cleats, Glazing Clips, Rubber Packing, Rubber Neoprene Packing, Screws, Anodised Aluminium Snap Beading, Anodised Aluminium Fittings such as Handles 200 mm Long [2 Nos], Hinges type B-21 100 mm long [2 Nos], Peg stays 150 mm long [1 No], etc complete all as specified and as directed.

S & F Mild Steel work confirming to Fe - 290, Grade E-165, as in framed work such as Grills, Gratings, Ladders etc with ends of bars shouldered and/or riveted, or forged into spikes, framed Guard Bars, Barred Iron Doors, Ladders, framed Balusters, Walk Ways, Railings, framework of Water Tanks and similar work complete all as specified and as directed.

S & F Rolled Mild Steel work confirming to Fe - 290, Grade E-165, as in roof trusses(framed), pulin rail and fastenings and heavy brackets framing (beam,tee,angle channels or flat sections) including distance pieces, cleats etc complete all as specified and as directed.

M & L for two coats of Synthetic Enamel paint over one coat of Red Oxide Zinc Chrome Primer on new steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

S & F Prepainted Galvalume Aluminium Zinc Coating GI based Corrugated Steel Sheet 0.5mm thick of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and as directed.

M & L for moorum filling under floors laid in layers not exceeding 15 cm thick, spread levelled and rammed / rolled including watering to required level and gradient complete all as specified and as directed.

M & L for Anodised Aluminium snap grid frame work of 600 X 600 mm panel size for false ceiling complete all as required at site and as directed.

S & F white sand gupsum board false ceiling of grid size 600 X 600 mm, 9 mm thick plain foil back suitably placed in false ceiling grid made of aluminium / GI / MS complete all as required at site and as directed.

M & L for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

S & F GI water tubing of 15 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.

S & F Stop Valves, 15 mm dia, cast copper alloy with capstan head, Chromium Plated fancy type, screwed down high pressure with crutch or butterfly handle for iron pipe etc complete all as specified and as directed.

S & F Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated with crutch or butterfly handle, screwed down for iron pipe etc complete all as specified and as directed.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigments complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Point wiring with 1.5 sqmm copper conductor unsheathed, multistranded, PVC insulated, single core cable with earth contunity conductor of 1.5 sqmm PVC insulated copper in and including rigid PVC conduit with conduit accessories / PVC Casing capping with casing capping accessories fixed to the surface of the roof/walls etc., including terminal boxes made out of 1.6 mm thick MS sheet for switches, fan regulators socket outlet etc along with 3 mm thick top laminated bakelite sheet for housing switches, sockets, regulators etc for One Light/ fan/ socket Point Controlled By One 5 Amps switch complete all as directed.

Point wiring with 2.5 sqmm copper conductor unsheathed, multistranded, PVC insulated, single core cable with earth contunity conductor of 1.5 sqmm PVC insulated copper in and including rigid PVC conduit with conduit accessories / PVC Casing capping with casing capping accessories fixed to the surface of the roof/walls etc., including terminal boxes made out of 1.6 mm thick MS sheet for switches, fan regulators socket outlet etc along with 3 mm thick top laminated bakelite sheet for housing switches, sockets, regulators etc for One Light/ fan/ socket Point Controlled By One 5 Amps switch complete all as directed.

Point wiring with 4.0 sqmm copper conductor unsheathed, multistranded, PVC insulated, single core cable with earth contunity conductor of 2.5 sqmm PVC insulated copper in and including rigid PVC conduit with conduit accessories / PVC Casing capping with casing capping accessories fixed to the surface of the roof/walls etc., including terminal boxes made out of 1.6 mm thick MS sheet for switches, fan regulators socket outlet etc along with 3 mm thick top laminated bakelite sheet for housing switches, sockets, regulators etc for socket Point Controlled By One 15 Amps switch complete all as directed.

Point wiring with 4.0 sqmm copper conductor unsheathed, multistranded, PVC insulated, single core cable with earth contunity conductor of 4.0 sqmm PVC insulated copper in and including rigid PVC conduit with conduit accessories concealed to the surface of the roof/walls etc., including terminal boxes made out of 1.6 mm thick MS sheet for switches, fan regulators socket outlet etc along with 3 mm thick top laminated bakelite sheet for housing switches, sockets, regulators etc for socket Point Controlled By One 15 Amps switch complete all as directed.

Point wiring with 4.0 sqmm copper conductor unsheathed, multistranded, PVC insulated, single core cable with earth contunity conductor of 4.0 sqmm PVC insulated copper in and including rigid PVC conduit with conduit accessories / PVC Casing capping with casing capping accessories fixed to the surface of the roof/walls etc., including terminal boxes made out of 1.6 mm thick MS sheet for switches, fan regulators socket outlet etc along with 3 mm thick top laminated bakelite sheet for housing switches, sockets, regulators etc for socket Point Controlled By One 15 Amps switch complete all as directed.

S & F switch piano 5 amps, flush type single pole 230 volts AC complete all as directed.

S& F switch socket combination 2 in 1, 5 Amps, multipurpose flush type complete all as directed.

S& F switch socket combination 2 in 1, 5 and 16 Amps, multipurpose flush type complete all as directed.

S& F ceiling rose 3 pole PVC / Polycarbonate isolated body complete all as directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as directed.

Supply and fixing LED recessed ceiling light full lit luminaire with glare free uniform illumination with longer life and less maintenance light fitting 24 watts for single face, 230 V 50 Hz AC supply complete with all accessories internally prewired and including connecting up with three core flexible copper coductor cable of size 1.5 sqmm complete all as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380 mm sweep with, blades, and frame and louvers complete all as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including hanging hook complete all as directed.

Supply and fixing MCB single pole and neutral, "C" curve, 230 V,breaking capacity 10 KA of rating 6 to 40 Amps complete all as specified and directed.

Supply and fixing MCB single pole and neutral, "C" curve, 230 V,breaking capacity 10 KA of rating 40 to 63 Amps complete all as specified and directed.

Supply and fix MCB DB, SPN 8 way double door, 230 V with 200 Amps rated busbar complete all as directed.

Supply and fix MCB DB, SPN 6 way double door, 230 V with 200 Amps rated busbar complete all as directed.

Supply and fix sheet metal enclosure with socket plug top and MCB Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 V complete all as directed.

Supplying, laying, testing and commissioning LT XLPE insulated , armoured heavy duty electric cable of size 2 core 10 sq mm , 1100 volts grade with stranded aluminium conductor laid in trenches / passing through pipe / duct/ road crossing /fixed on poles / walls Complete all as specified and directed. [Note: The rate quoted shall inclusive of termination at ends with suitable aluminium lugs where required]

M&L for sand cushioning / sand covering for underground cable protection complete all as specified. Note: Punned thickness shall only be measured and paid.

Supply and laying sub class 'B' bricks of old size (approved size locally available) laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge

Supply, commissioning and installing of exhaust chimney for 100 men cook house with SS Hood, GI duct line, Tubular axial fan motor and all its accessories for its smooth running complete all as specified and directed. Make : Kutchina / Hindware / Sol-Vent or equivalent as approved

Supply and fix Electric storage water heater geyser single phase 230 volts, 2 KW of capacity 25 Ltr with all its accessories to provide heated water at the desired point all as specified and directed. Make: Havells Model No. Senzo GHWAPDTIV025 or its equvalent in Bajaj / Usha / Jaguar & Company Pvt. Ltd / AO-Smith as approved.

M&L for earthing complete with GI earth plate electrode of size 60cm x 60cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5m below the normal ground level connected with GI wire 4 mm by means of bolts, nuts, check nuts & washers of galvanished iron steel including necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50m, with and including PCC chamber in PCC (1:2:4), type B1,using (20mm graded stone aggregate), 40mm thick RCC 1;2;4 Type B1 as cover, watering arrangement with funnel internally secured with wire mesh with 20mm dia medium grade pipe for watering, 20 mm dia light grade, GI pipe for lead protection in & including alternate layers of charcoal dust and common salt complete all as shown in electrical "Plate No '3' and connected to earthing test point all as specified and indicated including testing on completion including retrieving old GI earth plate, CI cover, GI pipes, angle iron frame from existing earthing as directed.

M.SK CONTRACTOR

M/S New Builders Corporation

ANSH CONSTRUCTION