Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹8.4 LAccepted-Finance CHOGLAMSAR CHOGLAMSAR CHOGLAMSAR LEH LEH LADAKH 194101 | LEH LADAKH | LADAKH | 194101 | ₹8.4 L | 1 | Accepted-Finance the bid amount is lower than the advertised cost |
| 2 | 2₹8.5 L+₹12,488.50 (1.49%)Accepted-Finance | ₹8.5 L+₹12,488.50 (1.49%) | 2 | Accepted-Finance the bid amount is lower than the advertised cost |
| 3 | 3₹8.8 L+₹44,851.70 (5.35%)Accepted-Finance | ₹8.8 L+₹44,851.70 (5.35%) | 3 | Accepted-Finance the bid amount is lower than the advertised cost |
Tender Value
₹9.9 L
EMD Value
₹19,838
Closing Date
16 Sept 2023, 10:00 amClosed
Divisional forest officer
Divisional forest office fort road leh
Chain link Fencing work at Himya Khatpo Community plantation area of Nyoma Forest Range
2023_FEE_10948_1
E-Tender No. 15 of FDL 2023-24
Open Tender
Civil Works - Others
Works
60 days
Divisional forest office leh
Please refer Tender documents.
2 documents required · 2 mandatory
₹400
Yes
Divisional Forest Officer
₹19,838
Yes
Divisional forest office fort road leh
18 Sept 2023
9 Sept 2023
16 Sept 2023
9 Sept 2023
16 Sept 2023
9 Sept 2023
15 Sept 2023
Amount
Earth work in excavation over area exceeding 30cm in depth as well as 10sqm on plane including disposal of excavated earth and lift up to 1.5 m disposal of earth to be leveled and neatly dressed. 230×0.45cmx.0.45cm×0.45cm= 20.95cum
Providing and laying in position cement concrete of specified grade including of centering and shuttering all work up to plinth level 1:3:6 (1 cement 3 fine sand 6 graded stone agg. 20mm nominal size) 1. crushed 230×0.45cmx.0.45cm×0.45cm= 20.95cum
Providing and fixing of fabricated angle iron fence post made of standard angle section 2.14 mtrs long with 15cm foot /toe at bottom with holes drilled and top bend (50mmx50mmx6mm)230
Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns 20x4x0.45m=27.00sqm
Providing and fixing of G.I chain link fabric fencing cold dip galvanized of required width in mesh size 100x100mm including strengthening /binding with 2mmdia G.I wire or nut bolts and washer as required complete as per the direction of the in charge 701mtrs x1.52mtrs height (1152kgs)
Supply at site angle iron posts and strand of required size including bottom to be split and bend at triangle in opposition direction of 10cm length and drill hook upto 10mm diaetc of all complete job. Flat 40mmx6mm 1x230x 5’.0”= 1150.00rfts or 350.60 RM @ 1.87kg/m =655.62kgs
Steel work in built up tubular round square or rectangular including cutting, hoisting , fixing in position and applying of one priming coat of approved steel primer including welding and bolting with special shaped washers etc including Hot finished welded type tubes. 4” dia NB medium. Entrance gate = 5.6x12’.00”= 66.00rfts or 20.12RM @12.2kg/m= 245.46kgs @Rs 110/kg
Providing and fixing of mild steel door bolts with holding and complete job.
Carriage of construction material by M.T as under:- a)Mechanical carriage of cement and fencing materials from sources toHimya( Avg distance of 80 kms) (92 bags x50=4600kgs) (Iron angle x230x9.60=2208kgs (Iron flat 230 x3.33=765.9kgs (chain link x92 x24= 2208 kgs ) (entrance gate x245.46kgs)
b) Sand/stone agg. Avg. (Lead 10km) 28.45 cum
Cost and installation of one sign board wit sizing = 6x4 ft with 4ft leg including wiring etc.
LADAKH STEEL INDUSTRY
SP.FABRICATION
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .