REPAIRS TO ROOF FLOORING CEILING WALL CLADDING SANITARY FITTINGS PLUMBING PLINTH PROTECTION AND OTHER MISC BR WORK AT KEY PERS QTRS INSTALLATION BLDGS OFFICE BLDGS OF GE NORTH BANGALORE UNDER AGE BR MEG OF GE NORTH BANGALORE

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed

Demolition of cement concrete (un reinforced) in ground floors and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed.

Demoltion of Cement Concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4.0 Sqm each etc complete all as specified and as directed

Taking down shutter of any description area exc 1.00 sqm but not exc 2.00 sqm and refixing in same opening etc complete all as specified and as directed

M&L providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in leveling concrete and the like including weathering, slightly rounded or chamfered angles and throating as directed

M&L for removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and 3 mm thick APP modified water proofing membrane, weight not less than 3.60kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.40 Litr/Sqm and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm incl screed bed 10 mm thick in CM (1:3) over concrete surface mixed with and incl water proofing compound incl taking down existing roof treatment of any types incl HP clay tiles etc along with cement plastering etc complete all as specified and directed.

S&F in repairs GI false ceiling with grid suspended system of size 600X600mm standard section consisting of main runner , cross Tee and wall angle as per mfd instruction / catalogue , ceiling suspended with 3 mm dia GI wire hanger fixed with steel dash fastner, butter fly clips, hold down clips etc (Main corner, cross tee& wall angle of MS galvanized with PPPCGS) incl 4 mm thick HPSC self textured design pre primered non asbestos fibre cement building boards fixed to false ceiling etc complete all as specified and as directed

M&L Pre-cast Cement concrete Type 1:3:6 using (20 mm graded stone aggregates) with solid blocks, exc 10 cm in width and setting in CM 1:6 incl demolition of brick Work / Stone Masonry/PCC block masonry built in cement mortar of any description all as specified and directed.

M&L for rendering for ceiling 5 mm thick in CM 1:3 on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete / Stone masonry surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:4) on other than fair faces of brick work or concrete/stone masonry surface finsihed even and smooth (without using extra cement) mixed with water proofing compound etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

Supply only liquid water proofing compound

S&F 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one ore more rebate includings necessary fixing lugs, locks strike plate etc complete all as specified and as directed

M&L MS Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed

S&F Box type Steel Windows/Ventilators double side shutters (Windows side hung type , Ventilators top hung) pressed steel frames made out CRC Sheet of 80x60x1.25mm double rebated, Shutters box type made out of CRC Sheet of 40x20x1.0mm , windows & ventilator shutter fixed made of glass and gauge fixed with box type hinges, Aluminium die cast handles for glass shutters, Iron flat type handles for mesh shutters, Telescopic stays, etc complete all as specified incl 12mm square guard bars/grill welded with steel frame (100mmc/c horizontically) all as specified and directed by Engineer-in-Charge. NOTE: (i) Payment under this item will be make combined for steel frames, steel shutters and Guard bar/Grill, However unit rate quoted shall deemed to include cost of beading, fittings such as handles, hinges,Telescopic stays, locking arrangements and fixing of glass and wiremesh etc. (ii) 4 mm thick sheet glass and 0.36 mm dia stainless steel wire mesh be measured and paid separately. (iii) Weight of Grill/Guard Bars, handle,hinges and locking arrangements shall not be accounted for payment purpose . (Note : All Windows/Vent design as per CECZ TD drg No 539)

M&L for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in hold fast and filling of pressed steel chowkhat etc complete all as specified and as directed

S&F 35mm thick flush door shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing etc complete all as specified and as directed

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed.

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed/Sliding type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified etc. complete shall as specified and as directed Note - Wire Cloth & Glass shall be measured and paid separately under respective items.

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing not less than 0.55 kg / m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed Note - Particle Board & Glass shall be measured and paid separately under respective items.

S&F in repairs aluminium door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg with alumnium die cost body etc complete all as specified and as directed

S&F 5.5mm thick tinted sheet glass and glazing with oil putty in squares exc 0.5 sq. m in each pane etc complete all as specified and as directed

S&F 9 mm prelaminated particle board, exterior grade, with both side decorative choice lamination & fixed with screws in Door / Partition work etc complete all as specified and as directed

S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complee all as specified and as directed

S&F 200mm long aluminium anodised tower bolt of extruded section etc complete all as specified and as directed

S&F 100 mm thick stainless steel butt hinges, medium weight, and fixed etc complete all as specified and as directed

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S&F 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and as directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed '

S&F 4mm thick sheet Glass, Ordinary qulatity and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed

M&L for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded stone aggregate) as in sub base of flooring etc complete all as specified and as directed

M&L for 25 mm thick Cement concrete type B-0,1:2:4 (12.5mm graded stone aggregate) as in levelling course of flooring etc complete all as specified and as directed

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

All as per item No 39 above but as in skirting /dado incl backing coat 10 mm thick in CM 1:3 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L Glazed ceramic coloured tiles 300X450X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match incl backing coat 10 mm thick in CM 1:3 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L for Hard stone coloured tiles of size 600mm x 600mm x 10mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed Make : Somary (Hard Stone) / Johnson (Meteor Series) or its equivalent as approved by GE.

All as per item No 42 above but as in skirting /dado incl backing coat 10 mm thick in CM 1:3 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M & L for vitrified Ceramic tiles (Dark Shade / Double charged / Ultra Charged) 8 to 9 mm thick (square / rectangular) polished, area ofeach tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to incl 15 mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

All as per item No 44 above but as in skirting /dado incl backing coat 10 mm thick in CM 1:3 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

S&F for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles over and including Screed bed or bedding layer of mortar 15mm thick in CM 1:6 incl demolition of stone slab (Laid bedded and pointed in any mortar) etc complete all as specified and as directed complete all as specified and directed.

M&L for machine pressed pre-cast concrete interlocking coloured paver Block of glass fibre reinfoced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment incl 50 mm thick M Sand cushioning incl demolition of stone slab (Laid bedded and pointed in any mortar) etc complete all as specified and as directed

M&L for 20mm thick granite Granite stone slab (Z Black / Lakha red or any other colour pattern as approved) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including grinding the edges half round and polishing incl 15 mm thick screed bed in CM 1:6 incl demolition of stone slab (Laid bedded and pointed in any cement) etc complete all as specified and as directed

M&L for 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade "A" complete all as specified and directed.

S & F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking down existing GI/CPVC pipe line etc complete all as specified.

S & F 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking down existing GI/CPVC pipe line etc complete all as specified.

S&F in repairs rotational moulded polythene water storage tank triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed

S & F in repairs 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

S&F in repairs viterous china squatting pan orrisa pattern of size 580X440 mm white with integral foot rest 'P' trap including connecting to trap incl S trap or P trap and flush pipe anti-symphonage pipe etc complete all as specified and as directed

S&F in repairs EWC (Ivory) with normal closing seat cover of size 540X375X415mm with S Trap incl connection to out going pipe, & seat cover and flushing pipe complete all as specified and as directed. (Make Cat no 4018 of Prayag or its equivalent make of CA)

S&F in repairs white vitreous china one piece wash basin of size 560X410X180mm excluding taps but including 32 mm dia chromium plated fitting, PVC waste pipe 610 mm long and PVC connection 450 mm long complete all as specified and as directed

S&F of kitchen sink made of stainless steel 1mm thick kitchen with plugs, washers and wastes: including bedding in cement mortar to dwarf wall or including fixing cantilever brackets or fixing in granite slab and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete in repairs including Dismantling of old sink

S&F in repairs Viterous China urinals, half stall (back or corner wall type), complete including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; incl 40 mm dia PVC waste pipe 610 mm long and PVC connection 450 mm long, flush pipe, grating and Union for discharge pipe etc complete all as specified and as diected

S&F in repairs PVC flushing cistern valveless with flushing out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc incl PVC connection 450 mm long complete all as specified and as directed (Make Cat no BA-502 of Prayag or its equivalent make of CA)

S&F in repairs bib cock with flange fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed (Make Cat no 9206 of Prayag or its equivalent make of CA)

S & F Bib Cock 2 way double handle with CP flange as fixed in repair all as specified and as directed. (Cat No-6812 Marcus series of Prayag or equivalent make as specified in CA)

S & F in repairs 15 mm pillar cock, chromium plated cast copper alloy fancy type complete all as specified and as directed.(Cat No 6802 Marcus series of Prayag or equivalent make as specified in CA)

S&F in repairs angle cock with flange fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch fixed for 15 mm dia bore pipe complete all as specified and as directed (Make Cat no 9210 of Prayag or its equivalent make of CA)

S&F in repairs soap dish holder with glass etc complete all as specified and as directed (Make Cat no BA-25G of Prayag or its equivalent make of CA)

S&F in repairs overhead round rain shower 8" Iwith out armns) of 15 mm bore dia etc complete all as specified and as directed (Make Cat no BOS-41 of Prayag or its equivalent make of CA)

S&F in repairs Glass Shelf 500 X125 mm with brass bracket etc complete all as specified and as directed (Make Cat no BEA-45 of Prayag or its equivalent make of CA)

S&F in repair full corner Glass Shelf 200mm (with brass brackets) etc complete all as specified and as directed (Make Cat no BEA-42 of Prayag or its equivalent make of CA)

S&F in repairs Towel rail 450 mm long incl fixing arrangement etc complete all as specified and as directed (Make Cat no BA-40 of Prayag or its equivalent make of CA)

S&F in repairs stainless steel towel ring incl fixing arrangement etc complete all as specified and as directed (Make Cat no BA-41 of Prayag or its equivalent make of CA)

S&F in repairs Hand shower (Health faucet) (ABS Body) with 8 mm dia, 1.20 mtr long flexible tube & wall hook etc complete all as specified and as directed.

S&F in repairs PVC Mirror cabinet of size 400x500 mm (Cat No 554 of Prayag or equivalent make) complete all as specified and as directed.

S&F in repairs 75 mm dia bore PVC (SWR) multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed

S&F 110 mm PVC, SWR pipes type 'B', single socketed in any length with rubber ring joint laid in floor / walls etc incl dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F 75 mm PVC, SWR pipes type 'B', single socketed in any length with rubber ring joint in floor / walls etc incl dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F PVC bends (any radius) of 110mm dia with access door etc complete all as specified and as directed

S&F PVC bends (any radius) of 75mm dia with access door etc complete all as specified and as directed

S&F 75 mm dia bore PVC (SWR) junction single, (Single T) equal or unequal with access door etc complete all as specified and as directed

S&F 110 mm dia bore PVC (SWR) junction single, (Single T) equal or unequal with access door etc complete all as specified and as directed

S&F PVC vent cowls of 110mm dia etc complete all as specified and as directed

M&L preparing of new plastered suface of walls and applying two coats of distemper oil emulsion ove a coat of primer etc complete all as specified and as directed

M&L preparing newly plastered surface of wall and applying two coat of cement base paint over a coat of alkali resistance primer etc complete all as specified and as directed

M&L for preparing new plastered surface of ceiling and applying Three coat of white wash etc complete all as specified and as directed

M&L for Preparation of new or previously un-treated steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

S&F in repairs stainless steel decorative curtain rod of 25 mm bore (weight not less 400 gms per running meter) incl fancy finale caps cap (02 nos in each curtain rod) etc complete all as specified and as directed

S&F in repair Brass Chromium Plated designer Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed

RK Builders (BID ID -3367451)

OM CONSTRUCTIONS (BID ID -3365061)