Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹33.9 LAccepted-AOC 84 B LOWER BURDWAN COMPOUND RANCHI 834001 JHARKHAND | RANCHI | JHARKHAND | 834001 | 1 | Accepted-AOC ok | |
| 2 | 2₹38.3 L+₹3.9 L (11.4%)Rejected-Finance 337 B ROAD NO 04 ASHOK NAGAR RANCHI 834002 JHARKHAND | RANCHI | JHARKHAND | 834002 | 2 | Rejected-Finance Quoted amt more than L1 | |
| 3 | 3₹39.9 L+₹5.5 L (16.0%)Rejected-Finance B 1203 VRINDA RESIDENCY BARIATU ROAD RANCHI JHARKHAND 834009 | RANCHI | RANCHI | JHARKHAND | 834009 | 3 | Rejected-Finance Quoted amt more than L1 | |
| 4 | 4₹42.7 L+₹8.3 L (24.0%)Rejected-Finance BESIDE RANCHI NURSING HOME BOOTY MORE RANCHI 835217 JHARKHAND | RANCHI | JHARKHAND | 835217 | 4 | Rejected-Finance Quoted amt more than L1 | |
| 5 | 5₹43.8 L+₹9.4 L (27.4%)Rejected-Finance 3B CHANDRALOK APARTMENT 3RD FLOOR KUTCHERY ROAD RANCHI JHARKHAND PIN 834001 | RANCHI | JHARKHAND | 834001 | 5 | Rejected-Finance Quoted amt more than L1 |
Tender Value
Refer Docs
EMD Value
₹87,900
Closing Date
28 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Dipatoli
GARRISON ENGINEER MILITARY ENGINEER SERVICES DIPATOLI CANTT PO- HOTWAR RANCHI Pin- 834012
SPL REPAIRS/REPLACEMENT OF LT NETWORK AT ASHIYANA GUEST HOUSE and AKARSHAN COMPLEX IN RECEIVING FEEDER AND SPL REPAIRS/REPLACEMENT OF LT OH ASSOCIATED INFRA AT GAURI SHANKAR ENCLAVE AT DIPATOLI UNDER GE DIPATOLI
2024_MES_669628_1
8000/2033/E8
Open Tender
Miscellaneous Works
Item Rate
150 days
GE Dipatoli
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE Dipatoli
₹87,900
Yes
2 Dec 2024
2 Sept 2024
30 Sept 2024
2 Sept 2024
28 Sept 2024
14 Sept 2024
Amount
Taking down XLPE cable from any height of pole and removing the materials from site and making good the disturbed surfaces etc complete all as specified and directed.
Supply,laying,jointing,testing and commissioning XLPE insulated,armoured,heavy duty, LT UG cable with aluminium conductor,1100 volts grade cross sectional area 16 sqmm 4 core connected with aluminium lugs connected by cramping tools complete all as specified and directed. Note:- Excavation and earth work will be measured and paid separately.
Supply,laying,jointing,testing and commissioning XLPE insulated,armoured,heavy duty, LT UG cable with aluminium conductor,1100 volts grade cross sectional area 25 sqmm 4 core connected with aluminium lugs connected by cramping tools complete all as specified and directed. Note :- Excavation and earth work will be measured and paid separately.
Supply,laying,jointing,testing and commissioning XLPE insulated,armoured,heavy duty, LT UG cable with aluminium conductor,1100 volts grade cross sectional area 50 sqmm 3.5 core connected with aluminium lugs connected by cramping tools complete all as specified and directed. Note:- Excavation and earth work will be measured and paid separately.
Supply,laying,jointing,testing and commissioning XLPE insulated,armoured,heavy duty, LT UG cable with aluminium conductor,1100 volts grade cross sectional area 70 sqmm 3.5 core connected with aluminium lugs connected by cramping tools complete all as specified and directed. Note :- Excavation and earth work will be measured and paid separately.
Supply,laying,jointing,testing and commissioning XLPE insulated,armoured,heavy duty, LT UG cable with aluminium conductor,1100 volts grade cross sectional area 120 sqmm 3.5 core connected with aluminium lugs connected by cramping tools complete all as specified and directed. Note:- Excavation and earth work will be measured and paid separately.
Supply,laying,jointing,testing and commissioning XLPE insulated,armoured,heavy duty, LT UG cable with aluminium conductor,1100 volts grade cross sectional area 240 sqmm 4 core connected with aluminium lugs connected by cramping tools all as specified and directed. Note:- Excavation and earth work will be measured and paid separately.
Taking down/dismantling LT PCC/steel tubular poles ,studs,insulator including V clamp,cross arms , earth wire support etc and deposit to MES store complete all as specified and directed.
M&L Steel tubular swaged poles complete with cast iron base plate,finial taper plug,bolts,nuts & screws as specified type 410 SP-31 ( 9.00 Meters long) complete all as specified and directed. Note : Excavation ,earth work & PCC work shall be measured paid separately.
Excavation in trenches in soft/loose soil n.exc 1.5 mtr wide and n.exc 1.5 mtr depth and getting out for taking out / laying of cable complete all as specified and directed.
Excavation in trenches not exceeding 1.5 mtr wide and depth beyond the first 1.5 mtr for foundation ect. Or for shafts, well, cesspits, mainholes ect. In any type of soil for foundation and getting out and levelling of bottom surface to required level all as specified and directed.
Supply and providing sand cushioning with dry clean sand 15 cm below cable and 8 cm above the cable complete all as specified and directed. Note : Punned thickness shall be measured for the purpose of payments.
Supply and laying unreinforced precast cement concrete cable covers, Class LV, Type-1, with peak, size 250 mm x 150 mm x 40 mm conforming the IS in trenches for cable protection complete all as specified and as directed.
Removing surplus excavated material not exc 50 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.
Supply and fix in replacement of 50 mm bore GI pipe light grade fixed on pole /trenches/wall/road crossing etc complete with clamp nut bolt etc all as specified and directed.
M&L for PCC (1:2:4) type B1 using 20 mm graded stone aggaregate in kerbs/coping /bed plates and like including weathering slightly rounded or chamfered complete with necessary use and waste fo form work complete all as specified and directed.
M&L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate in foundation mass concrete and filling including weathering slightly rounded or chamfered complete with necessary use and waste fo form work complete all as specified and directed.
Taking down outdoor type LT Panel with by disconnecting all connections very carefully of size apprx (2x2x1) mtr with necessary switchgear deposit to MES store complete all as specified and directed.
Supply and installation testing and and commissioning outdoor LT panel totally enclosed weather and vermin proof, suitably ventilated, 440 Volts, 50HZ,AC supply, fully compartamentalised cubical type made out of 3 mm thick CRCA sheet steel for load bearing and 2.0 mm thick non load bearing portions, protection of enclosure IP-54 as per IS-2147 of 1962 complete with pretreatment and powder coating of approved colour including suitable angle iron/flat iron frame work/supports, excavation and earth work, PCC foundation etc, including the follwoing switchgear, supplied fitted and connected internally complete with bus bar all as directed and specified by Engr-in-charge :- (a) 4 Nos verticle copper bus bar of equal size of aluminium conductor with PVC coloured heat shrinkable type sleeves contiuous rating 400 Amps with provision to connect the outgoing cable. (b) MCCB TPN, 415 volt fixed type, 250 Amps, adjustable overload and short curcuit with breaking capacity 36 KA- 01 No (Incoming )(Make: L&T/Schnieder/siemens) (c) MCCB TPN, 415 volt fixed type, 200 Amps adjustable overload and short curcuitwith breaking capacity 25 KA- 01 No (Outgoing)(Make: L&T/Schnieder/siemens) (d) MCCB TPN, 415 volt fixed type, 160 Amps adjustable overload and short curcuitwith breaking capacity 25 KA- 01 No (Outgoing)(Make: L&T/Schnieder/siemens) (e) MCCB TPN, 415 volt fixed type, 100 Amps adjustable overload and short curcuitwith breaking capacity 25 KA- 02 No (Outgoing)(Make: L&T/Schnieder/siemens) (f) MCB TPN for street light
Supply and installation testing and and commissioning outdoor LT panel totally enclosed weather and vermin proof, suitably ventilated, 440 Volts, 50HZ,AC supply, fully compartamentalised cubical type made out of 3 mm thick CRCA sheet steel for load bearing and 2.0 mm thick non load bearing portions, protection of enclosure IP-54 as per IS-2147 of 1962 complete with pretreatment and powder coating of approved colour including suitable angle iron/flat iron frame work/supports, excavation and earth work, PCC foundation etc, including the follwoing switchgear, supplied fitted and connected internally complete with bus bar all as directed and specified by Engr-in-charge :- (a) 4 Nos verticle copper bus bar of equal size of aluminium conductor with PVC coloured heat shrinkable type sleeves contiuous rating 400 Amps with provision to connect the outgoing cable. (b) MCCB TPN, 415 volt fixed type, 250 Amps, adjustable overload and short curcuit with breaking capacity 36 KA- 01 No (Incoming )(Make: L&T/Schnieder/siemens) (c) MCCB TPN, 415 volt fixed type, 100 Amps adjustable overload and short curcuitwith breaking capacity 25 KA- 05 No (Outgoing)(Make: L&T/Schnieder/siemens) (d) MCB TPN for street light
Supply and installation testing and and commissioning outdoor LT panel totally enclosed weather and vermin proof, suitably ventilated, 440 Volts, 50HZ,AC supply, fully compartamentalised cubical type made out of 3 mm thick CRCA sheet steel for load bearing and 2.0 mm thick non load bearing portions, protection of enclosure IP-54 as per IS-2147 of 1962 complete with pretreatment and powder coating of approved colour including suitable angle iron/flat iron frame work/supports, excavation and earth work, PCC foundation etc, including the follwoing switchgear, supplied fitted and connected internally complete with bus bar all as directed and specified by Engr-in-charge :- (a) 4 Nos verticle copper bus bar of equal size of aluminium conductor with PVC coloured heat shrinkable type sleeves contiuous rating 300 Amps with provision to connect the outgoing cable. (b) MCCB TPN, 415 volt fixed type, 200 Amps, adjustable overload and short curcuit with breaking capacity 36 KA- 01 No (Incoming )(Make: L&T/Schnieder/siemens) (c) MCCB TPN, 415 volt fixed type, 100 Amps adjustable overload and short curcuitwith breaking capacity 25 KA- 04 No (Outgoing)(Make: L&T/Schnieder/siemens) (d) MCB TPN for street light
Supply and installation outdoor type loop in loop out junction box totally enclosed double door weather and vermin proof, suitably ventilated, 440 Volts, 50 HZ,AC supply, fully compartamentalised cubical type made out of 3 mm thick CRCA sheet steel and powder coating including suitable angle iron/flat iron frame work/supports, excavation and earth work, PCC foundation etc, including 4 Nos copper bus bar of 200 Amps with indicating lamps of R,Y,B and MCCB TPN, 415 volt adjustable type, 100 Amps with breaking capacity 25 KA- 01 No at incoming side complete all as directed and specified by Engr-in-charge.
M &L for GI Earthing complete with GI earth plate electrode 60cm x 60cm x6 mm buried directly in ground verticvally to size of earth pit not less than 0.90x 0.90 x 2.25 mtr below ground level with top edge of the plate at a depth not less than 1.5 mtr below ground level, earth plate connected to galvanised earth strip of size 25x4 mm, 7.5 mtr long (Min) by means of brazing nuts, bolts, check nuts, & washers ,testing of completion (drawn in earth strip protection pipe light gade GI of size 40 mm dia) by means brazing at both edges with vertical plane of electrode all as shown in plate No 3 of SSR Part - I filling with charcoal dust , and common salt , including necessary excavation and earth work in any type of soil ,perforated watering pipeof size 15 mm dia,funnel with wire mesh,earth strip protection pipe light grade PCC chamber 1:3:6 type C1 (for even finish on both the faces) and RCC cover 1:2:4 Type B1,450 x450 x50 mm thick with 6 mm dia CTD bars 150 mm c/c with 2 Nos of handles of 10 mm dia steel rod all as specified and directed and testing on completion and connected to equipment with lugs and screw nuts etc all as specified and directed by EIC Note : (i) 7.5 RM GI earth wire deemed to be included in quoted rates beyond 7.5 RM wire shall be measured and paid separately. (ii) Earth resistance of earth pit should be not more than 02 Ohms on testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. (iii) Rate quoted by the tenderer is deemed to included salt & Charcoal upto & above 450 mm (Min) top of GI Plate.
M&L mild steel as in cross arms bracing supports clamps and back planes fabricated from structural steel section including nut, bolts washers welding welding drilling holes for bolts in any shape and size as indicated or directed and inclusive of one proimer coat one under coat one finishing coat of aluminium paint complete. paint complete to support the cables all as specified.
Supply & Fix wire mess fencing of opening size 30mm x 30mm and 2mm dia of wire MS fencing,and inclusive of one primer coat one under coat one finishing coat of aluminium paint complete all as specified and as directed by Engr-in-charge.
Dismantling and taking down old unserviceable street light fitting/bldg security light fittings/High Mast Light fitting/Post top laltern of any capacity from upto 20 mtr height of pole /wall incl disconnecting the cable connections complete all as specified and directed.
S & F Pressure die cast aluminum alloy housing LED street light fitting 60 Watt comprises of pressure die cast Aluminium housing & having system efficiency 110 lumens/Watt i.e 6670 lumns,All LEDs should be highpower LEDs of 1W to 3W Only with moduler lens for batwin shape distribution of 30 degree & 60 degree,Input voltage working range is 140 Vac to 270 Vac,Brand name should be emoboised,Potted Driver is used with 4KV internal & external 5KV Potted surge protection,Short Circuit Protection,Open Circuit Protection,High & low voltage protection,fixture should withstand high & low voltage protection,fixture should withstand high voltage upto440 v for 8 hr,IP66 Protected,THD<10%,CRI>70CCT 5700+/-300K, PF>0.9, Driver efficiency>85%,LM79 report require from NABL Accediated lab complete all as specified and directed.
S and F in repair polycarbonate junction loop in / loop out box of internal size 250 x 210 x 115mm made out of FRP (Hot moulded type) with weather proof canopy and locking screws alongwith 5/6 Amps MCB-01 No, 15 Amps rated 3 pole connector - 01 Nos, neutral link mounted and Din rail suitable size for mounting MCB/Connector complete in the box, duly fixed to steel tubular pole/PCC pole using 25 x 3mm FI clamp with suitable gland and lugs for connecting cable including taking down old one complete all as specified and as directed.
S&F in replacement service bracket for street light fitting made out of 40 mm bore light grade GI pipe of length 1.5 mtr long (approx) bend to shape 115 degree and fix to pole for fixing of street light fitting on pole/wall etc fixed with 2 Nos 32x 6 mm GI clamp, Nut,bolts,washer etc complete all as specified and directed.
Supply and fix 1.5 Sqmm, single core Two runs PVC insulated and unsheathed FR cable 1100 Volts grade with multistranded copper conductor and one run of 1.5 Sqmm cable for common earth dolly drawn through heavy duty PVC conduit for street light pole including connection from kiosk box to street light fittings complete all as specified and directed.
Supply and Fix Heavy duty PVC Non metallic conduit of external dia 20 mm complete all as specified and directed.
Dismantling of ACSR conductor from HT OH lines any size all as directed.
Dismantling of LT insulator any type any capacity all as directed.
Dismantling cross- arms of MS ,channel or angle sections & Earth Wire etc complete all as specified and directed.
Supply,laying,jointing,testing and commissioning XLPE insulated, armoured, heavy duty, LT UG cable with aluminium conductor,1100 volts grade cross sectional area 185 sqmm 3.5 core connected with aluminium lugs connected by cramping tools all as specified and directed. Note:- Excavation and earth work will be measured and paid separately.
Supply and fix in replacement of 100 mm bore GI pipe light grade fixed on pole /trenches/wall/road crossing etc complete with clamp nut bolt etc all as specified and directed at site.
M&L for trenchless boring 120 mm bore dia under road crossings/foot paths by manual / Boring machine complete all as specified and directed at site.
S&F GI strip of size 25x4 mm connected both ends with necessary bolts, nuts & washrs complete all as specified and directed.
M & L , hardcore of gauge n-exc. 40mm, deposited ,spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface. Note:- Hardcore of gauge not exceeding 40mm shall executed near base of electric Panels and inside the transformer fencing etc.
Dismantling/ Taking down earth/ craddle wire of any description complete all as specified and directed.
Excel Enterprises (BID ID -3118366)
arics infrastructure (BID ID -3099205)
M/S GYANITECH ENTERPRISES (BID ID -3119015)
ASSOCIATED BUILDCON LLP (BID ID -3105049)
M/S ABHAY KUMAR AND BROTHERS (BID ID -3104639)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .