Tiruchchirappalli division : 1). Proposed Raising of PFs to high level at 12 stations (NSG6- 2, HG3- 9, HG2-1) (13 PFs) in Sr.DEN/East jurisdiction 2).Raising of PFs to high level at 8 stations ( NSG6- 5, HG3- 1, HG2- 2) (11PFs) in Sr.DEN/North jurisdiction 3).Augmentation of facilities for Divyangjan passengers - Raising of existing LL/ML PFs to HL PF's in TPE (HG-2-PF 1), TOM (HG3-PF 2) & MCJ (HG-2, PF 1) - Electrical general arrangements - Works Contract.

conditions removing obstruction if any including tools & plants, labour etc., and as per instruction of site Engineer in charge and as per drawing No: DRM/EL/TPJ/40-2016.

Description:- Excavation of cable / pipe trench and pits of required width, length and depth etc in

instruction of site Engineer in charge and as per drawing No: DRM/EL/TPJ/40-2016. This item to be used for track crossing

per instruction of site Engineer in charge.

the instruction of site Engineer incharge.

cement, sand etc and tools & plant labour etc., and as per instruction of site Engineer in charge for plinth and as required at site.

06 Description:- Refilling of cable trench and pits with excavated soil.

07 TRICHCHIRAPPALLI DIVISION-ELECTRICAL/SOUTHERN RLY 07 Description:- Laying and testing of LTUG Power cable of up to and including 50 sq.mm size complete with accessories.nb: LTUG cable of suitable size only will be supplied by Railways.

will be supplied by Railway.

of necessary accessories such as straight through coupler etc. nb: HDPE pipe of suitable size only will be supplied by Railway. Above/

ar 10 Description:- Laying of HDPE pipe of 75 mm dia including supplying and fixing of necessary accessories such as straight through coupler etc. nb: HDPE pipe of suitable size only will be supplied by Railway.

Description:- Supply and termination and connection of LTUG cable of sizes of up to and including

comprises of one number of flange type brass cable gland and with four numbers of aluminium crimping sockets for all cores of the cable.

Description:- Supply and termination and connection of LTUG cable of sizes above 50 sqmm but up

gland.Note: One termination comprises of one number of single flange type brass cable gland and with four numbers of aluminium crimping sockets for all cores of the cable.

(2004), for cable leading without clamps, including proper sealing for cable leading pipes.

(2004), for cable leading without clamps, including proper sealing for cable leading pipes.

Description:- Fabrication, supply and fixing of clamps made out MS flats of different sizes for fabrication of clamps for various requirements. This shall be made use for fixing of items indicated in

each of zinc chromate and grey enamel paint or suitable colour as instructed by the Engineer in charge and using GI bolts with nuts of suitable size for fixing. Note: This shall be made use for fixing of items such as UG cables, cable leading pipe, 'U' brackets for shelter mains, enclosures made out of 16 SWG sheet steel contemplated elsewhere and cable tray etc.

Description:- Fabrication, supply and fixing of covers for for various requirements made out of MS sheet steel of 16 SWG thick, powder coated of suitable colour as instructed by the Engineer in charge. This also includes supply and fixing of all required accessories required for the purpose for

including rubber gaskets, hinges, handles locking arrangements shall also be supplied. Note: This is to be made use for fabrication of metering bunks, enclosures for various uses including cover for termination in MCB type distribution boards and switch etc and cable tray etc , which are not covered specifically in this work.

cables of upto and including 50 sqmm size

of above 50 sqmm but up to and including 185 sqmm.

flat size 40mm x6mm x 350mm length concreting and coping, painting etc complete with all other accessories as per drawing No: CEE/CN/MS/11-2004.

drawing No: DRM/EL/TPJ-10-2015.

21 TRICHCHIRAPPALLI DIVISION-ELECTRICAL/SOUTHERN RLY

accessories like base plate, including supply of two coats of each Zinc chromate primer, aluminium paint as per drawing no CEE/CN/MS/20-2004.

duty GI pipe 50 mm dia with ISI mark complete with all other accessories as per Drawing. No EL / P / Type 1022.

23 Description:- Supply and laying of 6 SWG GI wire, for earth continuity confirming to IS 12776.

D e s c r i p t i o n : - Supply, erection, testing and commissioning of GRP enclosure

70sqmm incoming terminal block - 4 nos, space for provision of three phase energy meter, 100Amps fuse base with fuse link - 3 nos and 1 no 100Amps neutral link and provision of earthing terminal 2 nos externally for connecting earth lead.

excavation of pit, shuttering and erection of octagonal pole as per drawing No: DRM/EL/TPJ/37-2018.

Description:- Supply and fixing of 16 ampsBakelite fuse unit, 20 amps SMC connector on 5mm thick SMC sheet inside the Octagonal Poles. The price offered shall be inclusive of the cost of supply

offered shall be inclusive of the cost of labour charges for terminating the incoming cable in the octagonal pole. The fuse unit and other accessories shall be confirming to relevant IS specifications. The cable shall be terminated with suitable cable lugs to avoid loose connection in future.

Description:- Wiring of light points through octagonal pole with 3 core 1.5 sq.mm wire. The price offered shall be inclusive of the cost of 1.5 sq mm wire PVC insulated copper cable three numbers one for phase, one for neutral and one for earth or 3 core 1.5 sq mm PVC insulated copper cable

erected on the pole. No intermediate joints will be permitted in copper cable. The price offered shall be inclusive of the cost of labour charges required for wiring the lamp post. If the pole is fitted with double arm arrangement for providing two light fittings, Two sets of cable shall be provided. Measurement will be taken as two for double arm lamp post whereas measurement for this item will be counted as one when pole is equipped with single light fitting.

such as GI bolts with nuts,clamps,arm brackets etc as per the instrctions of Engineer-in-Charge. nb: Street light type / flood light type LED luminaire only will be supplied by Railway.

the same as instructed by the Engineer-in-Charge.