Supply, installation, testing and commissioning of soft starters based panels for new Motor operated pumping units of OWS plant at PHBPL Paradip.

Supply, installation, testing and commis

Horizontal and vertical laying of one or more armoured / unarmoured PILCA / PVC insulated and PVC sheathed / XLPE LT power (voltage grade upto 1.1 KV)/ control/ telephone/ instrument/ CCTV/ computer and other cables of following sizes in pre-excavated cable trench or existing trench / RCC or Hume or Stoneware or Metal pipe / masonry duct, fixing of number tags ( if required), testing plus transportation from stores to site, unpacking, straightening, dressing of cable and returning the empty drum with unused cable, if any, to stores etc. all complete with labour and materials as per the drawings, specifications and directions of the Engineer-in-charge. NOTE: Cables will be supplied by the Owner .

Overall diameter >55 MM but upto 75 MM

3 / 3.5 / 4 x 120 sqmm

3 x 120 sqmm

LT CABLE END TERMINATION FOR ARMOURED/ PVC INSULATED ALUMINIUM CABLE WITH SINGLE COMPRESSION BRAS Providing end termination of power/control cable including cutting, stripping, providing & fixing heavy duty type lugs, cable insulation, providing & glanding single compression heavy duty brass cable gland conforming to IS-12943 (Dowell's or apporved equivalent), wherever specified, providing heavy duty type aluminium lugs for power cables and copper lugs/connectors for control cables, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in-Charge.

7 x 2.5 sqmm LT control cables with copper lugs

LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME -Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge

3 x 120 sqmm

7 x 2.5 sqmm LT control cables with copper lugs

Upto 3 / 3.5 / 4 x 6 sqmm

Erection of Push Button Station/Control Station with MS channel grouted with PCC including excavation alignment,erection and connection of Push Button, connection of control cable, earthing including supply and fixing of saddles, nuts, bolts etc. and painting wth two coats of bituminous aluminium paint/synthetic enamel paint over a coat of red oxide primer all complete with labour and materials as per drawing and the direction of Engineer-in- Charge (Push Button will be supplied by Owner)

Supply and erection of 250 mm x 380 mm 340 mm deep at top and 120 mm deep at bottom canopies made out of 2 mm thick sheet for mounting on Push Button Stations support to render them weachther proof including fabrication, mechanical assembly and supply and fixing of screws, nuts, bolts etc. and painting with 2 coats of bituminous aluminium synthetic enamel paint over a coat of red oxide primer all complete with labour and materials as per the direction of Engineer-in-Charge

Supply and fixing of earth bus bar of GI flat of following size on wall etc. with a clearance of 6 mm from the wall with spacing insulator GI rack bolts wherever necessary including drilling 6 mm dia holes at about 25 mm apart complete with double nuts, washers GI machine tools etc. all complete with labour and materials as per direction of the Engineer-in- Charge.

Supply and fixing of earth bus bar of GI flat of following size on wall etc. with a clearance of 6 mm from the wall with spacing insulator GI rack bolts wherever necessary including drilling 6 mm dia holes at about 25 mm apart complete with double nuts, washers GI machine tools etc. all complete with labour and materials as per direction of the Engineer-in- Charge. (50 X 6 MM GI FLAT)

Supply and fixing of earth bus bar of GI flat of following size on wall etc. with a clearance of 6 mm from the wall with spacing insulator GI rack bolts wherever necessary including drilling 6 mm dia holes at about 25 mm apart complete with double nuts, washers GI machine tools etc. all complete with labour and materials as per direction of the Engineer-in- Charge. (25 X 5 MM GI FLAT)

Supplying and laying 8 SWG GI earth wire at 0.50 m below ground level

Supplying and laying 6 SWG GI wire at 0.50 m below ground level

DEMOLITION OF PLAIN CEMENT CONCRETE-Demolishing concrete and disposal of material within 50 metres Demolishing concrete and disposal of material within 50 metres lead:

1:3:6 or richer mix

DEMOLITION OF REINFORCED CEMENT CONCRETE

DEMOLITION OF BRICK WORK -Demolishing brick work including stacking of serviceable material and disp Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 metres lead:

In cement mortar Incement mortar

DISMANTLING STEEL WORK IN BUILT UP SECTIONS INCLUDING DISMEMBERING Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead :

ROAD DISMANTLING-Dismantling including stacking of serviceable material and disposal of unserviceab Dismantling including stacking of serviceable material and disposal of unserviceable material within 50 metres lead:

Bituminous road Bituminous road

PCC: Providing and laying Plain Cement Concrete 1:3:6 by volume (1 cement: 3 coarse sand: 6 coarse aggregate of specifications given below) for all depths below and upto plinth level in foundations, fillings, non-suspended floors, pavements and ramps etc. including tamping, ramming, vibrating, curing, shuttering etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed; complete with all labour, materials, tools and tackles, consumables, transportation etc.; all as per specifications and directions of the Engeer-in-charge.

1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and laying Plain Cement Concrete 1:4:8 by volument (1 Cement: 4 Coarse Sand: 8 Coarse aggregate of specifications given below) for all depths below and upto plinth level in foundations, fillings, non-suspended floors, pavements and ramps etc. including tamping, ramming, vibrating, curing, shuttering etc. all as specified in any shape, position, thickness and finishing the to surface rough or smooth as specified and directed; complete with all labour, materials, tools & tackles, consumables, transportation etc.; all as per the specifications and directions of the Engineer-in-charge

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size).

Providing and laying smooth Cement Plaster with cement mortar of proportion and thickness specified below, on RCC/PCC/Masonry works etc. in walls, ceilings etc., including preparation of base, raking of points, making drip moulds, scaffolding upto any height, rounding the corners, curing etc. with all labour and materials complete, as per drawings, specifications and directions of the engineer-in-charge

15 mm thick plaster with Cement Mortar 1:6 (1 Cement: 6 Fine sand)

Supply ,fabricating and installing following sizes of perforated GI cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling and / or fix to steel / RCC columns, beams, or any other structure members with MS suspenders, angles, channels etc. complete as per the direction of Engineer-in Charge

100 mm x 25 mm x 2 mm

200 mm x 25 mm x 2 mm

450 mm x 25 mm x 2 mm

FLP/WP PUSH BUTTON STATION - Supply ,erection,testing and commissioning of FLP/WP push button(ON/OFF) control station of approved make with /without ammeter for the motor off control at field including connection and termination of copper control cable, fabricating, earthing the supporting structure, painting the same, including supply & installation of double compression cable glands & flame proof plugs for sealing all spare entries including the cost of all labour ,tools, materials etc. complete in every respect as per the specification and directions of the Site Engineer/Engineer-in-charge including the cost of all labour,tools, materials etc. complete in every respect as per the specification and directions of the Site Engineer/Engineer-in-charge: With Ammeter

Supplying and laying reinforced cement concrete light duty hume pipe, non pressure type (NP3), centrifugally cast conforming to I.S.458 with 1:3:6 concrete casing at joints as required with necessary slope including excavation, backfilling, supply of collars, jointing of pipes with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement: 2 fine sand), testing of joints, complete in all respects as per specifications, drawing and the direction of the EIC/Site Engineer: 300 mm dia

Supplying and laying reinforced cement concrete light duty hume pipe, non pressure type (NP3), centrifugally cast conforming to I.S.458 with 1:3:6 concrete casing at joints as required with necessary slope including excavation, backfilling, supply of collars, jointing of pipes with stiff mixture of cement mortar in the proportion of 1:2 ( 1cement: 2 fine sand), testing of joints, complete in all respects as per specifications, drawing and the direction of the EIC/Site Engineer: 200 mm dia

CABLE TRENCH: Excavation in unpaved areas of earth in work sites for conventional cable trenches for a depth upto 1.5 metres including shoring, strutting etc. (if necessary), backfilling the trench, job complete in all respects, including all labour and materials complete as per drawings, specification and directions of Site Engineer / Engineer-in-Charge

Copper LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40% CU,6CX2.5 mm², 2XWY

Aluminium LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40% AL,3C X 120 mm²,A2XFY

STEEL STRUCTURAL WORKS Supply, fabrication, erection, installation of steel structural works of any type and shape such as cable raks, cable trays, push button control posts etc., as required job complete in all respects including the cost of all labour, tools, material etc., complete.and as per specifications and directions of site engineer/ Engineer-in-Charge.

3-1/2 x 400 sqmm

3-1/2 x 240 sqmm

RCC: Providing and laying reinforced cement concrete 1:2:4 (1 cement :2 coarse and : 4 coarse Aggregate as specified below) ure of all types, e.g. foundations, footings, rafts, beams, columns, plinth beams, slabs, pile caps, retaining walls, trenches, equipment/machine foundations, pedestals, stair cases etc. including providing pockets, openings, recesses, chamfering etc. where required, tamping, vibrating to achieve proper compaction, curing and rendering, if required, to give a smooth and even surface etc. all complete for all depths below and upto plinth level, in any shape, position and thickness, as per drawings, specifications and directions of the Engineer-in- charge with cost of all labour and materials complete but excluding the cost of centering, shuttering and steel reinforcement. With cement issued at Issue Rates from Owner's Stores, including transportation from Stores to work site and returning all excess/ unused cement to Owner's Storage point after completion of work.- Crshed Stone chips 20 mm and down gauge.

Design, Supply, installation, testing and commissioning of LTMCC panel with following items* One Incomer feeder with 4P, 1250A ACB ,40KA,415V, With LSIG Protection,Drawout Type, Current transformers, OC/EF relay (REJ601), Push Button, and Indicating Lamps including control circuitry, *Three 75KW,415V motor outgoing Soft Starter feeders : FCMA Plus Soft Starter Coils, MCCB, Main contractor, Bypass contactor, Current transformers, Current transformers, Current transformers, Current transformers, Current transformers, Current transducer, PLC, MPR, MFM and Push Button, and Indicating Lamps including control circuitry with type-II coordination. *One Outgoing 800A ACB Feeder (Draw out type, 800A) with LSIG protection, Current transformers, OC/EF relay (REJ

601), Push Button, and Indicating Lamps including control circuitry at PHBPL Paradip. Complete panel assembly in all respect as per scope of work. Trench modification and other accociated civil works are exculded form this line item. (Packing, Transportation and transit insurance included )