Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹1.2 CrAccepted-AOC MISSION HOSPITAL CHOWK KEDARPUR AMBIKAPUR DIST SURGUJA CG 497001 | SURGUJA | CHHATTISGARH | 497001 | ₹1.2 Cr | L-1 | Accepted-AOC Accepted as L-1 |
| 2 | Rejected-Technical TELEPHONE EXCHANGE DHANPURI DISTT SHAHDOL MP | UMARIA | MADHYA PRADESH | 484001 | - | - | Rejected-Technical Rejected |
| 3 | Rejected-Technical JANNAT MANZIL CHACHAI DISTT ANUPPUR MP | - | - | Rejected-Technical Rejected |
Tender Value
₹1.4 Cr
EMD Value
₹1.8 L
Closing Date
29 Jul 2023, 5:00 pmClosed
Staff Officer EnM SECL Sohagpur Area
Staff Officer EnM SECL Sohagpur Area Dhanpuri Distt Shahdol MP 9425533402
Additional standby provision in 33 KV line for Shahdol Feeder no. 02 from Chachai 220 KV Substation and for Khairaha UG Mine from Singhpur Hardi Feeder of Sohagpur Area
2023_SECL_283104_1
SECL/SGP/EnM/eT/23-24/213 Dtd 06.07.2023
Open Tender
Electrical and Maintenance Works
Item Rate
120 days
Sohagpur Area SECL
As per NIT and Tender documents
6 documents required · 6 mandatory
₹1.8 L
18 Mar 2024
7 Jul 2023
31 Jul 2023
7 Jul 2023
29 Jul 2023
8 Jul 2023
7 Jul 2023 - 22 Jul 2023
Amount
Additional standby provision in 33 KV line for Shahdol Feeder no. 02 from Chachai 220 KV Substation and for Khairaha UG Mine from Singhpur Hardi Feeder of Sohagpur Area.
Shahdol Feeder no. 02 from Chachai- Miscellaneous Capital - STAY CLAMP B TYPE 65X8MM MS FLAT FOR RAIL POLE
STAY GI WIRE 7/4.00 MM.(7/8 SWG)
STAY SET 20 MM COMPLETE
M S BOLT WITH NUT 16X200 MM
33 KV, 10 KN PIN COMPOSITE POLYMER INSULATOR
33 KV COMPOSITE POLYMER STRAIN SET WITH HARD WARE SUITABLE FOR PANTHER CONDUCTOR
33 KV , 45 KN DISC POLYMER LONG ROD TYPE T&C INSULATOR
BACK CLAMP FOR H BEAM POLE OF 50X8MM MS FLAT
33 KV AB SWITCH 400 AMP TP GANG OPERA TED
CONCRETING (1:3:6) OF STAY @ 0.3 CMT . PER STAY (20 MM)
GALVANIZED 33KV SINGLE POLE CUT POINT FITTING 100X50X6 MM CHANNEL
33 KV LINE ON H-BEAMS 13 MTR. LONG SUPPORTS WITH DOG CONDUCTOR WITH MAXIMUM SPAN OF 70 MTR-FOR RURAL AREA. (4.792 Kilometer) ( Task no. N-A-1.2) -H- BEAM 13 METER 152 X 152 MM 37.1 KG/ METER
33 KV 'V' CROSS ARM 1.5 MTR (5 FT)- CENTRE MADE FROM 75X75X6MM ANGLE
BACK CLAMP FOR H BEAM POLE OF 65X8MM MS FLAT
33 KV TOP CLAMPS 75X75X6MM ANGLE TYPE
33 KV SINGLE POLE CUT POINT100X50X6 MM CHANNEL
33 KV SIDE CROSS ARM (100X50X6MM MS CHANNEL)
EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE
33 KV, 10 KN PIN COMPOSITE POLYMER INSULATOR
ACSR DOG CONDUCTOR 0.10 SQ. INCH (100 SQ.MM. AL.EQ.), (6/4. 72 + 7/1.57 MM)
JOINTING SLEEVES (ALUMINIUM) FOR DOG CONDUCTOR
STAY SET 20 MM COMPLETE
STAY GI WIRE 7/4.00 MM.(7/8 SWG )
H.BEAM CLAMPS 65X8 MM FLAT
STAY INSULATOR 90X65 MM
STONE BLOCK/RCC BASE PLATE SIZE 450X450X75 MM ( 2 NO. PER STAY AND 1 NO. FOR POLE ), DRG. NO. DISCOM/EZ/ 47 & 48.
CONCRETING OF H-BEAM/ RAIL POLE @ 0.94 CMT. PER POLE (INCLUDING MUFFING)
CONCRETING (1 :3:6) OF STAY @ 0 .3 CMT. PER STAY (20MM)
RED-OXIDE PAINT
ALUMINUM PAINT
ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)
DANGER BOARD ENAMELED 33 KV
ALUMINIUM BINDING WIRE AND TAPE
M S BOLT WITH NUT 16X200 MM
33 KV D.P .STRUCTURE ON H-BEAMS 13 MTR. LONG FOR DOUBLE CIRCUIT SINGLE STRINGING (08 Each) ( Task no. N-A-6.2)- H - BEAM 13 METER 152 X 152 MM 37.1 KG/ METER
DC.CROSS ARMS 5 (1.5 METER) CENTRE TO CENTRE 100X50X6 MM ISMC CHANNEL
H .BEAM CLAMPS 65X8 MM FLAT
33 KV, 45 KN DISC POLYMER LONG ROD TYPE T&C INSULATOR
33 KV STRAIN HARDWARE (T&C TYPE ) FITTINGS
33 KV, 10 KN PIN COMPOSITE POLYMER INSULATOR
BRACING SET FOR 5 FEET (1.5 MTR) CENTRE DP ANGLE OF 65X65X6MM
BACK CLAMP FOR H BEAM POLE OF 65X8MM MS FLAT
STAY SET 20 MM COMPLETE
STAY GI WIRE 7/4.00 MM.(7/8 SWG)
STON E BLOCK / RCC BASE PLATE SIZE 450 X450X75 MM ( 2 NO. PER STAY AND 1 NO. FOR POLE), DRG. NO. DISCOM/EZ/47 & 48
CONCRETING OF H-BEAM/ RAIL POLE @ 0.94 CMT. PER POLE (INCLUDING MUFFING)
CONCRETING (1:3:6) OF STAY 0.3 CMT. PER STAY (20MM).
EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2. 5 MTR LEAD OF 4.0 MM G .I WlRE.
RED-OXIDE PAINT
ALUMINUM PAINT
ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)
DANGER BOARD ENAMELED 33KV
M S BOLT WITH NUT 16X200 MM
MS STRAIN PLATE 65X8 MM,250 MM LONG
33 KV T.P.STRUCTURE ON H-BEAMS 13 MTR. LONG FOR DOUBLE CIRCUIT DOUBLE STRINGING (DCDS) & DOUBLE CIRCUIT SINGLE STRINGING (DCSS) - (1 each) (Task no. N-A-7.2)- H- BEAM 13 METER 152 X 152 MM 37.1 KG/METER
DC .CROSS ARMS 5·(1.5 METER) CENTRE TO CENTRE 100X50X6MM ISMC CHANNEL
H.BEAM CLAMPS 65X8MM FLAT
33 KV, 45 KN DISC POLYMER LONG ROD TYPE T&C INSULATOR
33 KV STRAIN HARDWARE (T&C TYPE) FITTINGS
33 KV, 10 KN PIN COMPOSITE POLYMER INSULATOR
BRACING SET FOR 5 FEET (1.5 MTR ) CENTRE DP ANGLE OF 65X65X6 MM
BACK CLAMP FOR H BEAM POLE OF 65X8MM MS FLAT
STAY SET 20 MM COMPLETE
STAY GI WIRE 7/4.00 MM .(7/8 SWG )
STONE BLOCK/ RCC BASE PLATE SIZE 450X450X75 MM ( 2 NO. PER STAY AND 1 NO. FOR POLE ), DRG. NO. DISCOM/EZ /47 & 48.
CONCRETING (1:3:6) OF H- BEAM @ 0.70 CMT.PER POLE INCLUDING MUFFING
CONCRETING (1:3:6) OF STAY @ 0.3 CMT. PER STAY (20MM)
EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE
RED-OXIDE PAINT
ALUMINUM PAINT
ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)
DANGER BOARD ENAMELED 33 KV
M S BOLT WITH NUT 16X200 MM
MS STRAIN PLATE 65X8 MM, 250 MM LONG
Khairaha UG Mine from Singhpur Hardi Feeder- 33 KV LINE ON H-BEAMS 152X 152 MM., 37.1 KG./MTR. 13 MTR. LONG SUPPORTS WITH DOG CONDUCTOR WITH AVERAGE SPAN OF 70 MTR - (3.16 Kilometer) (Task no. A-1.3)- H- BEAM 13 METER 152 X 152 MM 37.1 KG/METER
33 KV 'V' CROSS ARM 1.5 MTR (5 FT)- CENTRE MADE FROM 75X75X6MM ANGLE
BACK CLAMP FOR H BEAM POLE OF 65X8MM MS FLAT
33 KV TOP CLAMPS 75X75X6MM ANGLE TYPE
EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE
33 KV, 10 KN PIN COMPOSITE POLYMER INSULATOR
ACSR DOG CONDUCTOR 0.10 SQ. INCH (100 SQ.MM. AL.EQ.)
JOINTING SLEEVES (ALUMINIUM) FOR DOG CONDUCTOR
STAY SET 20 MM COMPLETE
H.BEAM CLAMPS 65X8 MM FLAT
STAY GI WIRE 7/4.00 MM.(7/8 SWG )
BACK FILLING OF POLES WITH BOULDERS
CONCRETING (1 :3:6) OF H BEAM @ 0.65 CMT.PER POLE ( BASE PEDDING MUFFING)
CONCRETING (1 :3:6) OF STAY @ 0 .3 CMT. PER STAY (20MM)
RED-OXIDE PAINT
ALUMINUM PAINT
ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)
DANGER BOARD ENAMELED 33 KV
ALUMINIUM BINDING WIRE AND TAPE
M S BOLT WITH NUT 16X250 MM
33 KV FOUR POLE STRUCTURE ON H-BEAMS 152 X1 52 MM., 37.1 KG./MTR. 13 MTR. LONG. (01 Number) ( Task no. A-2-C.2) - H- BEAM 13 METER 152 X 152 MM 37.1 KG/ METER
DC.CROSS ARMS 8 (2.4 METER) CENTRE TO CENTRE 100X50X6 MM CHANNEL
BACK CLAMP FOR H BEAM POLE OF 65X8MM MS FLAT
33 KV, 45 KN DISC POLYMER LONG ROD TYPE T&C INSULATOR
33 KV STRAIN HARDWARE (T&C TYPE ) FITTINGS
33 KV, 10 KN PIN COMPOSITE POLYMER INSULATOR
BRACING SET FOR 8 FEET (2.45 MTR) CENTRE DP ANGLE OF 65X65X6MM
CONCRETING (1:3:6) OF H-BEAM @ 0.65 CMT.PER POLE (BASE PEDDING +MUFFING)
EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2. 5 MTR LEAD OF 4.0 MM G .I WlRE.
RED-OXIDE PAINT
ALUMINUM PAINT
ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)
DANGER BOARD ENAMELED 33KV
M S BOLT WITH NUT 16X200 MM
M S BOLT WITH NUT 16X165 MM
M S BOLT WITH NUT 16X90 MM
M S BOLT WITH NUT 16X40 MM
33K V TAPPING D.P.STRUCTURE ON H-BEAMS 152 X 152 MM., 37.1 KG./MTR.13 MTR. LONG (01 Number) ( Task no. A-2-D.2)- H - BEAM 13 METER 152 X 152 MM 37.1 KG/ METER
DC.CROSS ARMS 5 (1.5 METER) CENTRE TO CENTRE 100X50X6 MM ISMC CHANNEL
H .BEAM CLAMPS 65X8 MM FLAT
33 KV, 45 KN DISC POLYMER LONG ROD TYPE T&C INSULATOR
33 KV STRAIN HARDWARE (T&C TYPE ) FITTINGS
33 KV, 10 KN PIN COMPOSITE POLYMER INSULATOR
BRACING SET FOR 5 FEET (1.5 MTR) CENTRE DP ANGLE OF 65X65X6MM
STAY SET 20 MM COMPLETE
STAY GI WIRE 7/4.00 MM.(7/8 SWG)
CONCRETING (1:3:6) OF H-BEAM @ 0.65 CMT.PER POLE (BASE PEDDING +MUFFING)
CONCRETING (1:3:6) OF STAY 0.3 CMT. PER STAY (20MM).
EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2. 5 MTR LEAD OF 4.0 MM G .I WlRE.
RED-OXIDE PAINT
ALUMINUM PAINT
ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)
DANGER BOARD ENAMELED 33KV
M S BOLT WITH NUT 16X250 MM
M S BOLT WITH NUT 16X140 MM
M S BOLT WITH NUT 16X90 MM
M S BOLT WITH NUT 16X40 MM
33 KV D.P.STRUCTURE ON H-BEAMS 152 X 152 MM., 37.1 KG./MTR.13 MTR. LONG - (03 Number) (Task no. A-2.2)- H- BEAM 13 METER 152 X 152 MM 37.1 KG/METER
DC .CROSS ARMS 5·(1.5 METER) CENTRE TO CENTRE 100X50X6MM ISMC CHANNEL
H.BEAM CLAMPS 65X8MM FLAT
33 KV, 45 KN DISC POLYMER LONG ROD TYPE T&C INSULATOR
33 KV STRAIN HARDWARE (T&C TYPE) FITTINGS
33 KV, 10 KN PIN COMPOSITE POLYMER INSULATOR
BRACING SET FOR 5 FEET (1.5 MTR ) CENTRE DP ANGLE OF 65X65X6 MM
BACK CLAMP FOR H BEAM POLE OF 65X8MM MS FLAT
STAY SET 20 MM COMPLETE
STAY GI WIRE 7/4.00 MM .(7/8 SWG )
CONCRETING (1:3:6) OF H-BEAM @ 0.65 CMT.PER POLE (BASE PEDDING +MUFFING)
CONCRETING (1:3:6) OF STAY @ 0.3 CMT. PER STAY (20MM)
EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE
STONE BLOCK/ RCC BASE PLATE SIZE 450X450X75 MM ( 2 NO. PER STAY AND 1 NO. FOR POLE ), DRG. NO. DISCOM/EZ /47 & 48.
RED-OXIDE PAINT
ALUMINUM PAINT
ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)
DANGER BOARD ENAMELED 33 KV
M S BOLT WITH NUT 16X200 MM
M S BOLT WITH NUT 16X165 MM
M S BOLT WITH NUT 16X90 MM
Miscellaneous Capital - 33 KV AB SWITCH 400 AMP TP GANG OPERATED
Total impact of GST for the purpose of CTC
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .