SPECIAL REPAIR TO OR MD ACCN BLDG. NO P-299/1 TO 8 AT 213 RKT REGT AND CERTAIN OTHER SANCTIONED WORK UNDER GE (E) JALANDHAR CANTT

Amount

Excavation in trenches in soft/loose soil, not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundations etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sqm on plan and getting out complete all as specified and directed.

Excavation in post holes (or similar holes) each n. exc. 0.5 cum in soft/ loose soil, getting out, returning, filling in, watering and ramming earth or broken rubble mixed with earth around in layers n. exc. 25cm and removing surplus soil to a distance n. exc. 50m and making good the surfaces complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete etc complete all as specified and directed.

M&L brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:6) complete all as specified and directed.

All as per Srl Item No. 4.00 here-in-before but except bricks

Returning filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25 cm thick each layer complete all as specified and directed.

Removing excavated material (soils) to a distance n. exc. 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

M&L for rendering 10mm thick cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L 5mm thick cement plaster on ceiling in cement mortar 1:3 including finishing the surface even & smooth complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying three coats of white washing complete all as specified and directed.

M&L for preparation of old surfaces of walls including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc. on plastered or un-plastered surfaces and applying one coat of white wash complete all as specified.

M&L for preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.

M&L for preparation of old surfaces of ceiling including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc. on plastered or un-plastered surfaces and applying one coat of white wash complete all as specified.

M&L preparation of newly plastered or un-plastered surface of walls including cornices, pilasters etc. and applying two coats of cement base paint complete all as specified and directed.

M&L complete removal of existing treatment by washing, rubbing down and stopping etc on wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer and making smooth finish complete all as specified.

M&L for PCC (1:7:12) type F-2 using 40mm graded brick aggregate as in filling in sunken floor, foundation, mass concrete etc. complete all as specified and directed

Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

M&L mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

M&L for 150mm thick cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate), as in sub floors, sub base, hard standing, concrete surfaces finished fair & even to receive topping floor finish/layer complete all as specified & directed.

M&L 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sub floors, sub base etc.; concrete surfaces finished fair and even and prepared to receive floor finish complete all as specified & directed.

M&L non skid ceramic coloured tiles (Square or rectangular) area of each tile exc. 0.06 Sqm but not exceeding 0.11 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

M&L for durastone vitrified tiles 300 x 300 x 10 to 12mm thick in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles over 15mm thick screed bed or bedding in cement mortar (1:6) complete all as specified and directed

M&L 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection path, laid in panels including finishing the concrete surface even & smooth without using extra cement complete all as specified & directed.

M&L PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in foundation filling, post holes, mass concrete, surface channels, drains and other similar works complete all as specified and directed.

M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down old GI tubing 15mm bore and connections including fittings complete all as specified.

Taking down old GI tubing 20mm bore and connections including fittings complete all as specified.

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) of 15mm bore pipe complete all as spcified and directed

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) of 20mm bore pipe complete all as spcified and directed

M&L 20mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

M&L 15mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

S&F PVC connection 15mm bore size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.

S&F vitreous china squatting pan Orissa pattern size 580 x 440mm white with front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) fixed including provision of lime concrete bedding etc complete all as specified and directed.

S&F PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bend etc. complete all as specified and directed.

S&F in repairs bib taps, cast copper alloy, with crutch or butterfly handles, fancy type screwed down, screwed for 15mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair 15mm angle/ stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butterfly handle screwed at two right angles ends for both iron pipe complete all as specified and directed.

S&F in repair stop valves 15 mm nominal bore, cast copper fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F vitreous china wash hand basin, white, flat back 550 x 400mm excluding taps, waste chain and plug and porcelain stopper but including bracket and cutting for and pinning in ends of brackets complete all as specified and directed.

M&L for brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

Disconnecting water tanks of 500 ltrs capacity setting aside for repairs cleaning and removing all scale and dirt etc from tank and mounths of circulating pipes & refixing in position complete all as specified and directed

S&F rotational moulded polyethylene water storage tanks, 500 liter capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, fixed in repairs complete all as specified & directed.

S&F 20mm gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed in repair complete all as specified

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, laid in trenches or in floors complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends any radius 110mm bore all as specified and directed.

S&F PVC (SWR) bends any radius 75mm bore all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece, double (double Y) equal or unequal with rubber rings joints fixed to wall complete all as specified and directed.

S&F 75mm bore PVC (SWR) branch piece, double (double Y) equal or unequal with rubber rings joints fixed to wall complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.

S&F 100mm size mild steel butt hinges medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

S&F mild steel barrel tower bolt 200mm long stove enameled black with bright bolt and fixed complete all as specified and directed.

S&F mild steel pressed handles, oval type, stove enameled black 125mm size complete all as specified and directed.

S&F Prayag Syment butt hinges 100mm long all as specified and directed.

S&F Prayag Syment tower bolt 200mm long all as specified and directed.

S&F Prayag Syment bow handle 125mm long all as specified and directed.

M&L rendering 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:3) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. Note : WPC shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and directed.

M&L rendering 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. Note : WPC shall be measured and paid separately.

Demolition of cement concrete (unreinforced) in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of reinforced cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete of any description and in any position complete all as specified and directed.

Demolition of brick work as in walls/ parapet walls removing grass fungus weed, roots of trees completely, grown on roof/ wall surfaces complete all as specified and directed.

Dismantling of brick tiles single layer as in roof covering all as specified and directed.

Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

S&F in repair sink made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm (minimum) including PVC waste pipe complete all as specified and directed.

M&L 60mm thick coloured reflective type machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-35 grade, with grey cement and pigment, laid in floor/ path/ hardstandings in any pattern as approved, laid over and including 30mm thick sand cushion and interstices filled with sand using plate vibrator complete all as specified and directed. Note : The sample shall be got approved from the GE before buld procurement and lots shall be got tested independently by the GE

M&L for sand cushioning with 8cm thick layer of sand before laying of cable and 15cm thick after laying of cable in trenches complete all as specified and directed

M&L PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth cources, roof kerbs or mud stops, benching, coping, bed plates, parapets, water throughs and the like etc including weathering, slightly rounded or chamfered angles throating, edges of interlocking/ chequered tiles etc complete including necessary form work complete all as specified and directed.

S&F in repair stainless steel plate rack made of 0.50mm thick of over all size 920mm x 785mm x 255mm and weight not less than 8.00 Kg each of approved quality, complete all as specified and directed

M&L for RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in chajjas, parapet, facia etc. complete all as specified and directed.

M&L precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate and set in cement mortar (1:4) as in landing, manholes cover slabs, chajjas, shelves and similar articles with plain fair faces, including champers, weatherings, throating etc complete all as specified and directed.

M&L mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets, sag rods (for securing chain link fencing etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel sections in supports for stiffening of fencing, wall ties, hold fasts, clamps, MS flat 50 x 6mm, plain angle cleats for securing purlins and similar small articles confirming to Fe-290 Gde E-165 complete all as specified and directed

M&L glazed ceramic coloured tiles of size 300 x 450 x 7mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface laid over and including 10mm thick rendering in cement mortar (1:4) and finishing the surface fair and even to receive tiles complete all as specified and directed.

M&L for preparation of new plastered or un-plastered surfaces of wall and applying two coats of oil emultion distemper over a coat of 1mm thick wall care putty complete all as specified and directed.

M&L complete removal of existing treatments by scrapping old treatment, washing, rubbing down and stopping of distempered and painted surfaces on wall surfaces and applying two coat of distemper oil emulsion over a coat of 1mm thick wall care putty complete all as specified.

M&L 4mm thick sheet glass ordinary quality and glazing with oil putty in squares exc. 0.50 Sqm in each pane complete all as specified and directed.

M&L 4mm thick figured glass, pin head type and glazing with oil putty in squares n. exc. 0.5 sqm in each pane complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n. exc. 1.5 Sqm each door/ window complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but n. exc. 4.0 Sqm each door/ window complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges fixed in repairs complete all as specified and directed.

S&F in repair new flexible PVC waste pipe of approved quality 25mm bore, 75cm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed

S&F in repair acrylic soap dish 6mm thick of size 125mm fixed to plugs with CP brass screws complete all as specifed

S&F PVC (SWR) floor trap with mild steel CP grating including jointing to waste pipe with solvent cement 75 mm dia of outlet fixed in repairs all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc., including cleaning for refixing or removal to store complete all as specified.

S&F in repair mild steel CP grating 125mm dia circular shaped and fixing with cement mortar (1:3) on Nahani Trap or floor trap complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removing surplus spoil out of defence land where directed complete all as specified

S&F mild steel screw bolts diameter of neck 11 to 15mm (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt n exc 50mm long and dia of shank 11 to 15mm including fixed with welding to angle complete all as specified and directed.

M&L for 2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., including one addtional member vertically fitted in center of shutter, sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

S&F mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame complete all as specified and directed.

M&L mild steel sliding door bolts 300mm long stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

M&L for preparation of new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 150mm complete all as specified and directed.

S&F in repairs 20mm dia curtain rails mild steel chromium plated with fixing brackets fixed in cup boards complete all as specified and directed.

M&L for polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 Kg/ Sqm complete all as specified and directed

M&L for flush pointing to brick terracing tiles in cement mortar (1:3) complete all as specified and directed.

M&L cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and directed.

M&L brick tile terracing with 40mm thick brick tiles laid over and including 15mm thick screed in cement mortar (1:6) complete all as specified and directed.

All as per Srl Item No. 105.00 here-in-before but execpt bricks

S&F in repairs 125mm chromium plated brass shower rose with swivel joints including fixing to steel pipe of union complete all as specified and directed.

S&F 4mm dia galvanised steel wire 50 x 50mm mesh made up into mattresses or cases, lapped wired and laid in position, including closing after filling complete all as specified and directed

M&L for repairing of RCC projections, chajjas, roofs, fascia etc by necessary preparation, scarping, cutting, chiseling de-rusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces with cement concrete (1:1½:3) using 12.5mm graded crushed stone aggregates and reinforcement with expended metal/ welded mesh of weight exc. 2 kg per sqm but n. exc. 3 kg per sqm with ot without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches area n. exc. 5 sqm each and thickness of RCC member n. exc. 70mm including necessary form work and applying two coats of cement base paint of tint matching with the existing surfaces; work in building at any height as required complete all as specified and directed.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.

M&L 18 to 20mm thick machine cut Kota stone in flooring laid over and including 15mm thick screed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the colour of stone slab including rubbing and polishing complete all as specified and directed.

M&L 18 to 20mm thick machine cut Kota stone as in vertical surfaces, risers of steps, skirting, dado and pillars etc laid over and including 10mm thick rendering in cement mortar (1:4) jointed with grey cement slurry mixed with pigment to match the colour of stone slab including rubbing and polishing complete all as specified and directed.

M&L 16 to 18mm thick pre polished green marble as in cooking platform laid over 15mm thick screed in cement mortar (1:6) including making of hole for LPG pipe and chamfering the corners complete all as specified and directed.

Wire brushing and cleaning top surface of cement concrete, including flashing and junction of parapets etc complete all as specified and directed

M&L for brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.

M & L for cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in roof pedding 50mm thick complete all as specified and directed.

M&L for applying a coat of hot blown paving industrial bitumen 85/25 at the rate of 1.20 kg/ sqm over the roof suface including cleaning surfaces complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3kg/ sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/ sqm) laid on primed surface by forced application complete all as specified complete all as specified and directed.

M&L for bitumen primer applied on plastered surface of roof at the rate of 0.40 kg/sqm of surface area of roof for water proofing treatment complete all as specified.

M&L for mild steel framed work as in doors chowkats or frames, cooler stand or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-410 Gde-E-250 complete including drilled for fixing of steel sheeting or other covering; doors, door frames, chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed.

S&F factory made 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including 30 x 6mm thick 2nd class hard wood lipping on edge complete all as specified and directed.

S&F steel window/ ventilator glazed and gauged (combination) with side hung/ top hung shutters including box type/ projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame inlcuding guard bars and necessary cooler arrangement in window complete as per Drg No. CEJZ/TD-1020/08 sheet 1/3 to 3/3 complete all as specified and directed. Note : Window/ ventilator glazed and gauged (combination) are fixed on site and net opening of window/ ventilator are measured one time only to paid to contractor

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stamples complete all as specified and directed

S&F in repair factory made built-in steel cup board with pressed steel frame of size 75mm x 50mm x 1.25mm thick with pressed steel shutter 1.25mm thick fixed to masonry wall by hold fasts, made out of 25 x 3mm flat iron including MS hanging rod of 10mm dia with brackets fixed on inner side of one leaf of shutter and on other leaf provn of MS peg set 3 pegs including spray painting with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surfaces of frame and shutter and fixing in PCC (1:2:4) all as directed and shown on Drg No. CEJZ/Td/20/11 sheet 1/5 to 5/5 dated 01 Aug 2011, complete all as specified and directed Make : Godrej, Durian or equivalent as approved by GE.

S&F of peg set of 5 of PTMT fixed to rear side of door shutter in bath complete all as specified and directed.

Supply, installation, commissioning and testing of voltage stabilizer copper wounded for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 150 Volts to 290 Volts with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 2 KVA complete all as specified.

M&L submain wiring with PVC insulated cable copper conductor FRLS two single core 4 Sqmm drawn through PVC rigid nonmetallic concealed/ surface conduit including earth continuity FRLS copper conductor 4 Sqmm PVC insulated with green insulation including taking down complete including making good the disturbed surface as per existing specifications all as specified and directed. Note : Two runs of cable 4.0 Sqmm, one run of cable 4 Sqmm and one Run of PVC conduit will be measured as one unit RM.

M&L sub main wiring with PVC insulated cable copper conductor FRLS two single core 6.0 Sqmm drawn through PVC rigid non metallic conduit including earth continuity FRLS copper conductor 4.0 Sqmm PVC insulated with green insulation complete all as specified and directed. Note: Two run of 6.0 sqmm wire and one run of 4.0 sqmm wire as earth wire through rigid PVC conduit shall be measured as one RM.

M&L sub main wiring with PVC insulated cable copper conductor FRLS two single core 1.5 Sqmm drawn through PVC rigid non metallic conduit including earth continuity FRLS copper conductor 1.0 Sqmm PVC insulated with green insulation complete all as specified and directed. Note: Two run of 1.5 sqmm wire and one run of 1.0 sqmm wire as earth wire through rigid PVC conduit shall be measured as one RM.

Supplying, Laying, jointing and testing LT underground XLPE insulated armoured heavy duty electric cable PVC sheathed with stranded aluminium conductor, 1100 volts grade of size 150 Sqmm 3½ core, laid in trenches, in floor, in duct, through pipes or along the pole including taking up existing defective cable complete all as specified and directed. Note : (i) Excavation, earth work shall be measured and paid for seperatly under respective items. (ii) Cost of suitable copper thimbles are included in quoted rates of cable.

All as per Srl Item No. 130.00 here-in-before but size 70 Sqmm 3½ core

All as per Srl Item No. 130.00 here-in-before but size 50 Sqmm 3½ core

All as per Srl Item No. 130.00 here-in-before but size 25 Sqmm 4 core

All as per Srl Item No. 130.00 here-in-before but size 10 Sqmm 2 core

All as per Srl Item No. 130.00 here-in-before but size 6 Sqmm 2 core

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/ abutting each other complete all as specified and directed.

S&F 40mm bore galvanised pipe light grade for passing of cable fixed to poles/ walls/ laying under floor complete with and including fittings and clamps as required complete all as specified and directed.

All as per Srl Item No. 137.00 here-in-before but size 50mm bore

All as per Srl Item No. 137.00 here-in-before but size 80mm bore

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI earth conductor 32 x 6mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, testing the earthing after completion complete all as specified and directed.

All as per Srl Item No. 140.00 here-in-before but GI wire 4mm

M&L for point wiring with 1.5 Sqmm, PVC insulated unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit ISI marked 20mm dia or higher complete with all conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel terminal switch box 1.6mm thick with 3 mm thick plastic laminated sheet top cover, brass screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated FRLS cable green in color as continous earth conductor connected to common earth and earth dolly with all accessories for one light point controlled by one switch complete all as specified and directed

All as per srl item No. 142.00 above but for one fan point controlled by one switch.

All as per srl item No. 142.00 above but for one outlet socket 3 pin 5 Amps on same board controlled with other switch

All as per srl item No. 142.00 above but for one outlet socket 3 pin 5 Amps on independent board.

All as per srl item No. 142.00 above but for one call bell point controlled by bell push

All as per srl item No. 142.00 above but for one light point controlled by two way switches

All as per srl item No. 142.00 above but 3 pin 15 Amp socket outlet with 2.5 sqmm PVC insulated FRLS copper cable and 2.5 sqmm PVC insulated FRLS copper cable for continuous earth continuity conductor all as specified and directed.

Supply & fixing switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete all as specified.

Supply & fixing switch piano flush type, 5 Amps, 240 Volt AC single pole, two way complete all as specified.

Supply & fixing switch piano flush type, 15 Amps, 240 Volt AC single pole, one way complete all as specified.

S&F ceiling rose surface type bakelite 65 x 50mm three terminal complete all as specified.

S&F ceiling fans 1200mm sweep, suitable to operate on AC 230 volts, 50 C/s, energy saving type BEE 5 star rated with double ball bearing, copper winding, pressure die casted aluminium covers and aluminium blades, ISI marked in white colour complete with all accessories with two years warranty (minimum) complete all as specified and directed.

S&F bell push switch flush type 5 Amps, SP 240 volts complete all as specified.

S&F call bell, ding dong AC single phase, 230 volts including wooden/ PVC board of suitable size, connecting & testing complete all as specified and directed.

Supply & fixing MCB SP 6 to 32 Amps, C-curve, 240V, 10 KA including taking down existing MCB complete all as specified.

Supply & fixing MCB SPN 6 to 32 Amps, C-curve, 240V, 10 KA including taking down existing MCB complete all as specified.

S&F MCB protected socket with top plug 3 pin and concealed sheet steel enclosure including MCB SP 10 KA of rating 6 to 32 Amps complete all as specified

M&L for sheet metal enclosure for DBs when MCBs to be used, SPN 8 ways 240 V, with 200 Amps rated bus bar, double door all as specified

M&L for sheet metal enclosure for DBs when MCBs to be used, SPN 4 ways 240 V, with 200 Amps rated bus bar, double door all as specified

Supply & fix fan 5 step regulator, electronic type, single phase,heavy duty incl connection complete after dismantling / removing unserviceable regulator all as directed.

S&F in repair energy saving tube light luminaries with diffuser LED with comprising with CRCA MS box powder coated finish with decorative end caps and 4 feet 20 watt (max) retro fit tube rod having thermally conductive aluminium heat sink, Lumen output 2100 lumens (min) 6500 K, power factor more than 0.95,IP-20 class-I protection with inbuilt LED driver, surge protection upto 2 KV, operative on 140 volts to 270 volts AC supply products must be made in India only, complete prewired, connection and testing complete all as specified and directed. Notes: (i) Contractor shall be provided 2 years written manufacture's guarantee for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall be produce LM-79 & LM-80 report of NABL accredited laboratory from manufacturer's.

Supply & fixing factory made junction box of size 250 x 300 x 125mm suitable for street light fixed on pole, made out of CRCA sheet 2mm thick having front hinged shutter with lockable arrangements, outdoor type, weather proof duly painted with two coats of synthetic enameled paint over a coat of red oxide primer, having the provision to connect incoming and outgoing cable of size 25 sqmm 4 core and one number MCB SP, 10 KA, C-curve, 6 Amps, 240 volts and earthing plug complete all as specified and directed. Note : MS Clamps , nuts, bolts required to fixing on pole shall be measured and paid separately.

S&F socket outlet 5 Amp 5 pin flush type complete all as specified and directed.

S&F socket outlet 3 pin, 6 pin 15 Amp flush type complete all as specified and directed.

S&F batten holder ISI marked insulated body complete all as specified.

S&F city 1 new decorative wall light fixture made up of polycarbonate, suitable for lamp type 1 x 15 watt retrofit LED lamp including 15 watt LED lamp of same make as fitting complete all as specified. Make: Havells cat part No LHFOWE1TZ1W012 or equivalent from group 1 in appendix ‘B’ to particular specifications.

Supply, installation commissioning and testing deep freezer hard top of capacity 300/320 Ltrs, single door suitable for operation on AC electric supply single phase, hermetically compressor, 240 Voltas, 50 C/S with non CFC gas environment friendly complete all as specified and directed

M&L for point wiring with 4 sqmm (nominal area), 1100 volt grade PVC insulated FRLS type multi stranded copper conductor cable drawn in and including concealed rigid PVC conduit fire proof ISI marked with accessories including cutting chases for laying of conduit/ fixing of boxes in walls/ floors etc including making good to disturbed surfaces as per adjoining specification and terminated in concealed terminal boxes including MS concealed terminal boxes with plastic laminated bakelite sheet top cover 3 mm thick make hylum or equivalent fixed with nickel polished screws with washers and earth continuity PVC insulated FRLS type cable with stranded copper conductor of size 2.5 sqmm (nominal area) green colour as earth wire connected with earth dolly complete all as specified and as directed for One light point controlled one switch.

Taking down carefully existing point wiring of any type (i.e. on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets wooden batten, conduit etc including accessories such as wooden gutties/ rawl plug, screw etc including removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

M&L for energy saving & environmental friendly long life versalite pressure di-cast aluminium luminaire with heat resistant glass and suitable optics for uniform distribution of light 25 watt LED for bldg security lights with high efficienty electronic driver, having IP-66 protection, surge protection min 2 KV power factor more than 0.9 complete operative on AC supply 140 volts to 270 volts pre-wired and product should be made in India qty inlcuidng bracket made out of GI pipe 32mm dia bent to shape and clamps 40 x 6mm with nuts and bolts prewired products must be made in India only connection and testing complete all as specified. Note: (i) Contractor shall be provided 2 years written manufacture's guarantee for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall be produce LM-79 & LM-80 report of NABL accredited laboratory from manufacturer's. Make:- Crompton / Bajaj /Polycab

S&F pre-stressed concrete poles LT 09 Mtr long 102mm x 172mm at top and 102mm x 279mm at bottom class-9, complying with requirement of IS-1678-1978 and painting of pole with two coats of synthetic enamel paint with black and white strips of 30 cm each upto 1.5 mtr height from top of PCC coping and numbering of poles complete all as specified and directed. Note: PCC in foundation & coping of poles and earth work to be measured & paid for separately.

M&L preparation of old painted surface of PCC LT poles and applying two coats of synthetic enamel paint in alternate black & white strips of 30cm each upto 1.5 mtr height from top of PCC coping and numbering of poles including painting of street light brackets, clamps etc complete all as specified and directed.

S&F LED street light luminaire 60 watt in epoxy powder coated pressure die-cast aluminium housing of standard size, heat resistant toughened clear glass fixed with SS screws controlled with potted CVCC type BIS marked electronic driver duly enclosed of approved brand only in housing having protection against over voltage, short circuit and opern circuit and surge protection against lightening of 5KV minium in circuit and 5 KV outside the driver but inside the fixture with IP-66, class-1 protection for LED and control gear compartments with high power LED chips of rating 2.5 to 3 watt (maximum) with colour temperature 5700 K (max) and with secondary optics modular independent lenses provided with casing and caping to minimize glare and for better distribution of light suitable for voltage band 120 volts to 270 volts, power fctor 0.95 (min) having efficacy 100 lumens/watt. Brand name should be embossed on fixture to ensure India brand only complete all as specified and directed Make:- Crompton / Bajaj /Polycab

S&F LED building secuirty light luminarie 25 watt in epoxy powder coated pressure die-cast aluminium housing of suitable size with 5% tolerance with, heat resistant toughened clear glass fixed with SS screws controlled with potted CVCC type, BIS marked electronic driver duly enclosed capable to withstand upto 440 volts for 8 hrs, of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening of 5 KV minimum in circuit and 5 KV outside the driver but inside the fixture with IP-66, Class-1 protection for LED and control gear compartments with high power SMD LED chips of rating 2.5 to 3 watt (maximum) with colour temperature 5700 K (Max) and with secondary optics modular independent lenses provided with casing and capping to minimize glare and for better distribution of light suitable for voltage band 120 volts to 277 volt, power factor 0.95 (minimum) having efficacy 120 lumens/ watt. Brand name should be embossed on fixture to ensure Indian brand only complete all as specified and directed. Make : Bajaj/ Philips/ Polycab Notes for Srl item No. 174.00 & 175.00 :- (i) All LED fitting shall be made in India only. (ii) Contractor shall be provided 2 years written manufacturer’s warranty for the LED fixture complete including driver from the certified date of completion. (iii) Contractor shall be produce LM-79 & LM-80 report of NABL accredited laboratory from manufacturer's local office and certificate of IP-66 and IK-08 from manufacturer. Make:- Crompton / Bajaj /Polycab

S&F MS cross arms, bracing, supports, clamps and back plates fabricated from structural steel section including nuts, bolts, washers, welding, bending, cold or hot, drilling holes or bolt in any shape or size including 2 coats of aluminium paint over a coat of red oxide primer complete all as specified and directed.

S&F structural framed work as in doors or gates of angle or other section with gusset plates, rails,bracesetc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with end incl either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing confirming to Fe 410-W (Gde-E-250) quality A, complete including two coats of synethic enamel paint over a coat red oxide primer all as directed

Taking down cross arms, channels, angle iron, clamps, nuts, bolts, stay wire, stay assembly, GI wire, anti climbing devices, danger notice boards etc. complete all as specified and directed.

Taking down service wires of size 2.5/ 4 sqmm 2 core complete all as specified and directed

Dismantling insulators any type and size from existing LT poles all as specified and directed.

Dismantling ACSR conductors from existing feeders all as specified and directed.

Disconnecting and dismantling of old LT armoured cable (off sizes) all as specified and directed.

S&F and connecting MCCB Enclosures with single door of suitable size for fixing of MCCB of size 40 Amp all as specified and directed.

S&F MCCB 40 Amps, 4 pole, with thermal magnetic release, ICS=ICU=100%, 415 volts, 50 HZ, 16 KA with spreader links complete all as specified and directed

M&L hard core of broken stone or boulder of gauge n. exc. 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed.

S&F bracket made out of 50mm dia medium grade GI tubing 2 metre long and bent to shape at 120° angle at the middle from vertical, fixed with clamps nuts and bolts, washer complete all as specified. (Clamps, nut, bolts and washers will be measured and paid separately).

S&F bracket made out of 25mm dia medium grade GI tubing 2 metre long and bent to shape at 120° angle at the middle from vertical, fixed with clamps nuts and bolts, washer complete all as specified. (Clamps, nut, bolts and washers will be measured and paid separately).

Supply, installing, testing and commissioning feeder pillar, outdoor cubicle type weather and vermin proof totally enclosed made out of 3.15mm thick CRCA sheet machine pressed of suitable size, suitable to operate on 3 phase 4 wire system, 415 volts, 50 Hz double door with front and rear openable with locking arrangement including inner independent enclosures for all switches/ MCCBs/ metering equipments with hinged (bottle type) shutters, bottom gland plate with sufficient numbers of circular cable entry holes with cable glands of suitable size of cable & with suitable cable glands as per number of outgoings, prewired complete duly powder coated with 7 tank process with base frame made of angle iron 50 mm x 50 mm x 6 mm, legs 100 cm long having openable apron on all three sides of panel 30 cm wide and grouted 45 cm in PCC (1:3:6) type C-1 including brick masonary platform 45cm above ground level all as specified and directedby Engr-in-charge, comprising with following complete:- (i) Bus bar suitable for 3 phase, 415 volts, 50 Hz, 4 wire system of rating 600 Amps made out copper strip of suitable size (strip size be based on 1.5 Amps per sqmm), with coloured heat shrinkable sleaves in four colours (Red, yellow, blue and black) fixed on resin cast insulators including galvanised nuts, bolts and washers etc fitted with and including the following :-

(ii) INCOMING : - (a) MCCB 250 Amp, 415 V, 25 KA, 4 pole with fixed thermal magnetic release ICS=ICU=100%-01 No. (b) Energy meter with LCD display , accuracy class 1.0, having parameters KW, KWh, KVAh & PF duly prewired with suitable size of copper insulated FRLS wire with universal code including suitable CTs complete. (c) Phase Indicator LED type in red, yellow and blue colours protected with and including MCB SP of suitable rating - 01 set (iii) OUTGOING:- (a) MCCB 160 Amp, 415 V, 16 KA, 4 pole with e thermal magnetic release, ICS=ICU=100%-02 Nos. (b) MCB 4 Pole 32 Amp -01 No (c) MCCB SPN 32 Amp - 02 Nos

All as per Srl Item No. 188.00 here-in-before but consisting with the following :- (i) Bus bar suitable for 3 phase, 415 volts, 50 Hz, 4 wire system of rating 300 Amps made out copper strip of suitable size (strip size be based on 1.5 Amps per sqmm), with coloured heat shrinkable sleaves in four colours (Red, yellow, blue and black) fixed on resin cast insulators including galvanised nuts, bolts and washers etc fitted with and including the following :- (ii) INCOMING : - (a) MCCB 160 Amp, 415 V, 16 KA, 4 pole with thermal magnetic release ICS=ICU=100%-01 No. (b) Three phase digital volt meter, CI 0.5- 01 No. (c) Three phase digital ammeter, CI 0.5 with suitable CTs-01 No. (d) Phase Indicator LED type in red, yellow and blue colours protected with and including MCB SP of suitable rating - 02 set (iii) OUTGOING:- (a) MCCB 63 Amp, 415 V, 16 KA, 4 pole with e thermal magnetic release, ICS=ICU=100%-04 No. (c) MCCB SPN 32 Amp - 02 Nos Note for Srl Item No. 188.00 & 189.00 : Drawings of LT panels shall be got approved from GE before placing order.

M&L PVC coated chain link fencing 10 gauge thick galvanised steel wire and 50mm x 50mm size mesh fixed to steel fencing post by galvanized iron nut bolt etc including provision of binding wire complete all as specified and directed and chain link approved by GE.

S&F automatic street light timer switch using nature switch for automatic switching of street lights based on LUX level of natural light. The infra red sensor based nature switch along of capacity of 5 KW, three phase, with suitable power contractor (AC 3) 20-25 Amps and MCBs SP (input-output) 25 Amps on each phase at incoming and outgoing connections fully enclosed in pole/ wall mountable enclosure, weather and vermin proof having front hinged shutter, rust proof, termite proof and FR grade SMC junction box having IP 54 protection, pre-wired complete with suitable wire PVC insulated FRLS type copper conductor with suitable copper thimbles/ lugs etc complete all as specified and directed.

S&F new generation, post-top, gate light energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source 25W, 5700K complete all as specified and directed. Make: Havells cat part No. LHEVBGP7PN6K025 or equivalent in Crompton/ Bajaj/ Polycab.

CHOUDHARY AND SONS

AMBER ENTERPRISES

M/S Vinod Kumar