Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.7 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED | |
| 2 | L5₹19.3 L+₹3.8 L (24.7%)Accepted-AOC 205 IIND PHASE INDUSTRIAL AREA BARMER 344001 | BARMER | BARMER | RAJASTHAN | 344001 | L5 | Accepted-AOC REJECTED | |
| 3 | L2₹16.3 L+₹78,105 (5.05%)Rejected-Finance | L2 | Rejected-Finance Highest | |
| 4 | L3₹16.5 L+₹1.0 L (6.52%)Rejected-Finance SHYAM BHAWAN OPP BANK OF INDIA CHOPASNI ROAD JODHPUR 342003 RAJ | JODHPUR | JODHPUR | RAJASTHAN | 342003 | L3 | Rejected-Finance Highest | |
| 5 | L4₹17.4 L+₹2.0 L (12.7%)Rejected-Finance CB 1 MAHAVEER NAGAR BARMER 344001 RAJ | BARMER | RAJASTHAN | 344001 | L4 | Rejected-Finance Highest |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
19 Jun 2023, 6:00 pmClosed
GE ARMY BARMER
Military Engineer Services, Jalipa Military Station, Garrison Engineer (Army), Barmer, PIN 344001
REPAIR MAINTENACE OF STREET LIGHT, PERIMETER SECURITY LIGHT AND ITS CONNECTED ITEMS AT JALIPA MIL STN AND ASCONE NODES UNDER GE ARMY BARMER
2023_MES_597513_1
8711/E8
Open Tender
Civil Works
Item Rate
330 days
GE ARMY BARMER
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE ARMY BARMER
₹50,000
14 Jul 2023
22 May 2023
24 Jun 2023
22 May 2023
19 Jun 2023
5 Jun 2023
Amount
Repairs to LED street light / of any make / type and capacity by replacing unserviceable parts including replacement of wornout connecting wires as per existing size of conductor and taking down fittings from the pole and refixing in position and testing complete as required and directed. Note :-(i) Unserviceable parts required to be replaced with new one shall be measured and paid separately as "Supply only" against respective items of this Schedule. (ii) Cost of replacement of worn out wire of the fittings and connections as per existing size of conductor of the each fittings is deemed to be included in unit rate quoted.
Supply only Driver for LED 25 watt complete. (Make-Bajaj/Havell's/ Crompton )
Supply only Driver for LED 45 watt complete. (Make-Bajaj/Havell's/ Crompton )
Supply only Driver for LED 60 watt complete. (Make-Bajaj/Havell's/ Crompton )
Supply only Surge protector for LED 25 to 90 watt complete. (Make-Bajaj/Havell's/ Crompton )
Repairs to LED Integrated Solar light of make Axxon Tech and capacity 12 watt to 24 watt by replacing unserviceable parts including replacement of wornout control wires as per existing size of conductor and taking down fittings from the pole and refixing in position and testing complete as required and directed. Note :-(i) Unserviceable parts required to be replaced with new one shall be measured and paid separately as "Supply only" against respective items of this Schedule. (ii) Cost of replacement of worn out wire of the fittings and connections as per existing size of conductor of the each fittings is deemed to be included in unit rate quoted.
Supply only solar charge controller 5 Amp for 12 watt to 16 watt for integrated solar street light Make: Axxon-12WSCC or techno commercially equivelant in Philips/ C & S
Supply only solar charge controller 10 Amp for 24 watt for integrated solar street light Make: Axxon-24WSCC or techno commercially equivelant in Philips/ C & S
Supply only PIR motion sensor for 170uA for solar street light 12 watt to 24 watt complete.
Supply only Lithium Ion Battery 11.1V/15.4 AH of dimension 210 x70 x 40 mm) for 12 watt.
Supply only Lithium Ion Battery 11.1V/19.8 AH of dimension 210 x70 x 40 mm) for 16 watt.
Supply only Lithium Ion Battery 11.1V/ 28.6 AH of dimension 210 x70 x 40 mm) for 24 watt.
Supply and fix in repair energy efficient LED street light fitting of 45 watt made up of pressure die cast aluminium housing with toughened glass and high power LEDS with secondary optics, efficacy 110/120 LPW, IP 66 protection aero dynamically designed for all weather conditions with efficient thermal management including 10 KV SPD complete all as specified and directed . Model: RAPTOR NEO Cat No : TRP-409-45-57-SL-GL-NSG of make CG or techno commercially equivalent model of Havells, Bajaj, Wipro, Halonix
Supply and fix in repair energy efficient LED street light fitting of 60 watt made up of pressure die cast aluminium housing with toughened glass and high power LEDS with secondary optics, efficacy 110/120 LPW, IP 66 protection aerodynamically designed for all weather conditions with efficient thermal management including 10 KV SPD complete all as specified and directed. Model: RAPTOR NEO Cat No : TRP-409-60-57-SL-GL-NSG of make CG or techno commercially equivalent model of Havells, Bajaj, Wipro, Halonix
Supply and fix in repair energy efficient LED street light fitting of 90 watt made up of pressure die cast aluminium housing with toughened glass and high power LEDS with secondary optics, efficacy 110/120 LPW, IP 66 protection aerodynamically designed for all weather conditions with efficient thermal management including 10 KV SPD complete all as specified and directed. Model: RAPTOR NEO Cat No : TRP-409-90-57-SL-GL-NSG of make CG or techno commercially equivalent model of Havells, Bajaj, Wipro, Halonix
Supply and fix in repair LED post top lantern (garden light) with B-22 base lamp holder and LED bulb of 9W aesthetically designed landscape and diffused lighting mounted on and including 1.5 mtr length GI pipe of 50 mm dia duly black painted and necessary arrangement for cable connection and foundation complete all as specified and directed.
Supply and lay in repair LT service aluminium cable 6 sqmm 2 core inside PVC conduit 20 mm dia medium grade for landscape lighting/ garden lighting inside trench or on wall/floor complete all as specified and directed. Note: The rate quoted must be inclusive of laying the cables in trench at max 10 cm depth or mounting on floor/wall
S&F Integral compact wide beam LED flood light luminiaire with die cast aluminium alloy housing with IP 66 protection, tampered protective toughened glass 5mm thick, thermal shock impact resistant cover, epoxy black powder coated finish, high purity pre-anodised specular aluminium sheet reflector, with silver painted contacts suitable for 1x100 Watts LED and connection with two runs of 2.5 Sqmm multi-stranded, copper flexible wire including taking down old unserviceable one and testing complete as specified and directed. Make Cat No Part No LHEPCZU7PA6J100 of Havells or techno commercially equivalent of Wipro and Crompton
Supply and fix in repair 60 W LED inverter street light luminaire with the following functions (a) Real time clock for automatic ON -OFF and dimming option as 100% at 1800 hrs and then 30% at 2300 hrs, 50% at 0400 hrs and switch off at 0600 hrs (b) In built lithium ion battery 3.7 V for 1.5 to 02 hrs power back up for operation at 15-20% of rated wattage in case of power failure with red indication for 230 V AC available and green blinking for battery charging and green stable for for battery fully charged. (c) Versatile pressure die cast alluminium alloy housing with specially designed integral cooling fins top maintainable , clear toughened glass and high efficient secondary lens with IP 66 protection and isolated compartment for driver and control gear. (d) LM 80 certified LED with 50000 burning hrs and system lumen efficiency 110 lm/W (e) Open and short circuit protection, reverse polarity protection , high voltage cut off at 300 ± 10 V and 5 KV internal surge protection, operating voltage 140 V to 270 V and operating temperature -10 ℃ to 50 ℃ Make Halonix Cat part No HLSLD-06-60-CWL-INV-DIMM-RTC-R or techno commercially equivalent of make in Bajaj/Havells, Wipro/Crompton
Supply and fix in repair GI pipe bracket for street light fittings made out of 32 mm dia GI pipe light grade 1.5 mtr long bent to required angle/ shape with and including necessary clamps, nuts, bolts, & washers of suitable size complete all as specified and directed.
S&F in repair PVC weather proof loop-in loop-out box with 4 pole terminal block mounted on porcelain or bakelite and MCB SP 06 Amps for controlling including necessary clamps for mounting on pole etc complete all as specified and directed. Make: Sintex Cat Part No-GSJB 2014 or techno commercially equivalent of approved make.
M&L in repair PVC insulated twin core 1100 volts grade 2.5 sqmm copper cable incl connecting up with loop in box to security light fitting complete all as specified and directed.
S&F in repair Rigid non-metallic PVC conduit 20mm dia fixed to pole inclusive of all fixing accessories such as MS clamp,nuts,bolts etc complete all as specified and directed.
Supply & fix in repair 3 pole contactor suitable for street light controlling with nominal current rating 32 Amp 415 V AC, Make: Indoasian cat part No 850047 or techno commercially equivalent in Legrand/L&T/Havells/Schneider
Supply and fix in repair automatic Street light timer nature switch using Infrared sensor tecnology based, three phase 5-8 KW with 03 Nos 16 Amps Contactor rating and three Nos Outgoing MCB of 20 Amp, enclosed in a pole /wall mounted rust proof, electric shock proof, termite proof and FR grade thermoplastic polycarbonate enclosure (with hinged lid) conforming to IP66 protection class 2. The circuit should also have provision for manual operation (i.e. sensor By-pass operation) and nature switch operation shall be based on natural light lux level i.e. automatic switching ON at Dusk (≤60 lux) and switching OFF at Dawn (≥10 lux) including necessary wiring complete all as specified and directed. Make Healer Enterprises Model Swadeep-66-5KW3P with Hensel enclosure confirming IP 66 or techno commercially equivalent make in Havells/Indoasian
Excavating in trenches, n.exc. 1.5 wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out soft/loose soil all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil all as specified and directed.
Removing excavated material/surplus soil not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meter above the starting point.
Material and labour for sand cushioning for under ground cables, spread in trenches, river sand including cleaning, spreading levelling, punning for laying/cushioning of cable all directed. with layer of 8 cm deep before laying cable and 15 cm depth after laying and stretching the cable complete all as specified and directed. Note: For the Purpose of payment puned thickness shall be measured.
M & L for Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat size 250 mm x 150 mm x 40 mm and abutting each other with gap between adjacent precast concrete cable cover not exceeding 10 mm punned sand over underground cables for protection complete all as specified and directed.
Material and labour for PCC 1:3:6 type C1 using 20 mm graded stone aggegrate in coping/bed places and the like including weathering slightly rounded on chamfered angles and with necessary form work with fair finished surface complete all as specified and directed.
M&L for PCC 1:3:6 type C1 using (20 mm graded stone aggregate) for make good to road surface , hard standing etc complete all as specified and directed.
Supply & Fix in repair GI pipe light grade 50 mm dia for cable protection laid in trenches under road/culvert etc complete all as specified and directed.
Supply & Fix in repair GI pipe light grade 50 mm for cable protection fixed to poles/bldg incl two Nos MS clamps made to shape out of 25 x 3mm MS flat and painting incl bolt, nut, washer etc complete all as specified and directed.
Supply and lay in repair XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed.
All as per Srl Item No 35 above but 16 Sqmm, 2 core complete all as specified and directed.
All as per Srl Item No 35 above but 10 Sqmm, 4 core complete all as specified and directed.
Repairs to High Mast light fittings (60 to 100 watts, 230/240 volts of any make) at site including taking down existing fittings from pole (up to16 Mtr hight) and refixing the same in position by means of crane/ manually after replacement of unserviceable/defective part(s) of the fittings s as required to make the fittings in smooth serviceable condition and testing complete and directed.
Devi Engineeing
Shri Maruti Trading Co.
M/S PRASHANT BENIWAL
National Rewinding Works
M/s Shiv Builder and Suppliers
new india engineers
M/S NAVIN & ASSOCIATES
M/s Malinath Electricals
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .