Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.5 LAccepted-AOC | L1 | Accepted-AOC Being lowest bidder. | |
| 2 | L2₹19.4 L+₹1.4 L (7.98%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
9 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF JAMMU
GE AF JAMMU
CA NO GE/AFJ-27/2023-24 REPAIR /MAINTENANCE OF B/R COMPLAINS NATURE OF WORKS OF OR MD ACCN AND MAP QTRS AT AF STN JAMMU UNDER GE (AF) JAMMU
2023_MES_611769_1
CA NO GE/AFJ-27/2023-24
Open Tender
Civil Works
Works
270 days
JAMMU
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE(AF) JAMMU
₹40,000
Yes
21 Nov 2023
2 Aug 2023
11 Sept 2023
2 Aug 2023
9 Sept 2023
21 Aug 2023
Amount
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,drains etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed by Engr in charge.
M&L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed by Engr in charge.
Dismantling existing unservicable floor/wall tiles of any description including bedding/screed layer all as specifed.
M&L for colored non skid ceramic tiles 7to 8 mm thick, area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:6 to match shade, pattern, laying etc of tiles complete all as specified and directed by Engr in charge.
M&L for 300x450 x7 mm thick glazed ceramic tiles colored as in dado/ skirting and vertical surfaces set&jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4 to match the shade, pattern, laying etc of tiles complete all as specified and directed by Engr in charge.
M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) as in cooking plateforms, counter type WHB and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust admixture of pigment to match with shade of granite& moulding the edges complete all as specified and directed by Engr in charge.
M&L Vitrified tiles light shade 9 to 10 mm thick (Square or rectangular ) polished , area of each tiles exc 0.36 sqm but not exe0.42 sqm , in floors etc laid over 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white cement to match complete all as specified and directed by Engr in charge.
S&F in repairs WC seat vitreous china Orissa pan of pattern, long pan size 580x440mm , with ‘P’ or ‘S’ trap, front or back inlet and integral foot rest complete, including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe, and anti siphon pipe complete all as specified and directed by Engr in charge.
S&F in Repair PVC seat cover for EWC white colour complete with MS hinged chromium plated complete all as specified and directed by Engr in charge.
S&F in repair PVC valve less, syphonic action type flushing cistern, low level with inlet, ball valve float and handle including brackets of capacity 10 ltrs incl PVC flush pipe complete all as specified and directed by Engr in charge.
S&F in reapired Vitreous china wash hand basin, white , flat back, size 630 x 450 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed by Engr in charge.
S&F in reapired vitreous china wash down water closet pan ( pedestal pattern ) white complete including ‘P’ or ‘S’ trap , seat cover and fixing to flushing cistern, brackets, flushing pipe etc complete all as specified.
Taking up CI pipes,SWR pipes (incl all fittings),bend , floor traps with spigot and socket ends and lead joints incl burning out joints and removing lead of 100/75mm dia pipe complete all as specified and directed by Engr in charge.
S&F rain water pipe 110mm dia with single socket joints fixed to wall with stack clamp complete all as specified and directed by Engineer-in-Charge
Supply and fixing bends (any radius) dimension pieces or tapers (Large bore measured) 100mm dia all as spd and directed by Engr-in-Charge
S&Fin repairs stack clamp cut of 50 x 5mm flat iron and 16mm dia round iron stays including bolt and nuts and securing ends of stay to water pipes suitable for 100 mm dia pipe including taking down unservicable clamp all as spd and directed by Engr-in-Charge
S&F in repair CP grating 125mm dia as suitable to existing trap as per requirement complete all as specified and directed by Engr in charge.
S&F shelf of PTMT fixed with and including Chromium plated brass screws and plastic cleats ( Minimum weight 300 gms)complete all as specified and directed by Engr in charge.
S&F soap container of PTMT fixed with and including Chromium plated brass screws and plastic cleats ( Minimum weight 105 gms) complete all as specified and directed by Engr in charge.
S&F towel ring of PTMT fixed with and including Chromium plated brass screws and plastic cleats ( Minimum weight 90 gms) complete all as specified and directed by Engr in charge.
S&F towel rail 450mm long of PTMT fixed with and including Chromium plated brass screws and plastic cleats ( Minimum weight 170 gms) complete all as specified and directed by Engr in charge.
S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and plastic cleats ( Minimum weight 190 gms) complete all as specified and directed by Engr in charge.
S&F in repair ball brass valves high pressure with PVC float and fly nut complete screwed for iron pipe or brass ferrule and fixed with 20mm dia complete all as specified and directed by Engr in charge.
Description all as per item no 23 above but 15mm dia complete all as specified and directed by Engr in charge.
S and F in repair 15mm dia bib tap fancy type chromium plated(CP) complete all as specified and directed by Engr in charge.
S and F in repair 15mm dia bib tap long nose Bib tap 15mm bore chromium plated(CP) complete all as specified and directed by Engr in charge.
S&F in repair pillar tap fancy type CP screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nut screwed for Iron pipe and fixed 15mm dia complete all as specified and directed by Engr in charge.
S and F in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x330mm x 160mm complete all as specified and directed by Engineer-in- charge
Supply and fixing in repair cast copper alloy 15mm dia stop cock screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixed complete all as specified and directed by Engr in charge.
Supply and fixing in repair long shank and cup (concealed Type) Stop tap 15mm bore chromium plated(CP) complete all as specified and directed by Engr in charge.
Supply and fixing in repair Angle valve cast copper alloy chromium Plated (CP) 15mm dia screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixed complete all as specified and directed by Engr in charge.
S&F in repair brass spindle complete for 15mm dia bib tap complete all as specifed
Supply and fixing in repair brass spindle complete for 15mm size stop cock complete all as specifed
Supply and fixing in repair brass spindle complete for 20mm size stop cock complete all as specifed
Supply and fixing fixed in repair 15mm dia 450mm long PVC connection with PTMT nut and washer complete all as specified and directed by Engr in charge.
Supply and fixing fixed in repair 15mm dia 600mm long PVC connection with PTMT nut and washer complete all as specified and directed by Engr in charge.
Supply and fixing in repair Shower Rose Cromium plated with arm suitable for 15mm dia pipe complete all as specified and directed by Engr in charge.
S&F in repair 32mm dia waste pipe of PTMT,half or full threaded (minimum weight 45 gms), to WHB and kitchen sink complete all as specified and directed by Engr-in-Charge.
Description all as per srl item no 38 above but 40 mm dia suitable for sink etc complete all as specified and directed by Engr in charge.
S&F in repair PVC syphon with knob for PVC flushing cistern of 10 Ltr of capacity all as specified
Disconnecting existing tanks of capacity of tanks. 500 ltr to 1000 ltrs setting aside (or lowering if required) for repair, cleaning etc and hoisting if required reconnecting and re-fixing in position including cleaning & removing all dirt and scale from tank and also from mouth of pipe completly as directed by Engineer-in charge .
Dismantling unservicable /cracked water tanks and removing from site capacity exe 250 ltr n.exe 500 ltr complete all as specified and directed by Engr in charge.
Description all as per Item no 42 above but 1000 Ltrs capacity complete all as specified and directed by Engr in charge.
Supply and fixing in repairs Rotational moulded polythene water storage tanksof capacity of tanks 500 ltr (cylindered vertical closed top ) hoisted and fixed in position all as spd in SSR Part –I complete all as specified and directed by Engr in charge.
Discreption all as per Item no 44 above but 1000 Ltrs capacity complete all as specified and directed by Engr in charge.
S&F in repair Brass CP Central Hole wash basin mixer for Hot and cold for 15mm bore complete fixed to connection complete all as specified and directed by Engr in charge.
S& F in repairs CP brass jet nozzle with 600 mm long PVC connection for EWC incl fixing device complete all as specified and directed by Engr in charge.
Kitchen plate rack, including shelves, made of stainless steel not less than 1mm thick with fixing acessories, overall size 900 mm x 900mm x 250 mm, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in all respect as specified in position complete all as specified.
S&F in repair Brass wall mixer/sink mixer for Hot and cold for 15mm bore complete fixed to connection complete all as specified and directed by Engr in charge.
PVC Mirror with cabinet shelf including screws and fixing on wall complete all as specified
Repair of Wall hanging seat, EWC seat 2 in 1, flushing ciestern, including spare part of same.complete all as specified.
S&F in repair PVC Tank cover for 500/1000 lit capacity complete all as specified and directed by Engr in charge.
Supply and fixing in repair aluminium anodized barrel tower bolt of extruded section 200 mm long complete all as specified (ISI Marked).
Supply and fixing in repair aluminium anodised barrel tower bolts of extruded section of size 100mm complete all as specifed
Supply and fixing in repair aluminium anodised barrel tower bolts of extruded section of size 150mm complete all as specifed
Taking down or cutting MS helical door spring 150mm to 200 mm long by welding or chiseling etc from metal door frames and M&L in same position by running welding n. exc 6 mm thickness of metal and including fixing roller plate on wooden rail with screws complete all as specified and directed by Engr-in- charge.
Supply and fixing in repair MS butt hinges medium weight cold rolled 100 mm ISI marked complete all as specified incl. required welding etc complete all as specified and directed by Engr-in- charge.
Description all as per item no.58 above but 50mm long complete all as specified and directed by Engr in charge.
Description all as per item no.58 above but 75mm long complete all as specified and directed by Engr in charge.
Supply and fixing in repair Mild steel pressed steel handle oval type stove enameled black of size 150mm complete all as specified and directed by Engr in charge.
Description all as per item no 61 above but 100mm long complete all as specified and directed by Engr in charge.
Supply and fixing in repair aluminum alloy handle 125 mm size cast type complete all as specified .
Supply and fixing aluminum anodized sliding door bolts 250 mm long with hasp and staple (bold type) complete all as specified (ISI Marked) fixed in repair
Taking up or down steel tubing for 15mm dia pipe and connections including cleaning for re-fixing or removal to store.all as spd and directed by Engg-in-Charge
S & F 15mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified.
Description all as per item no 67 above refixing only all as spd and directed by Engr-in-Charge
Taking up or down steel tubing for 20mm dia pipe and connections including cleaning for re-fixing or removal to store.all as spd and directed by Engr-in-Charge
S&F 20mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified.
Description all as per item no 70above refixing only all as spd and directed by Engr-in-Charge
Cutting chases,pinning for concealed water tubing and making good to facing where required and pointing in cement mortar 1;3 ,cutting n exc 10cm girth all as specified and as directed by Engineer-in -Charge.
Supply and fixing in repair prelaminated particle board 18/19mm thick interior grade,prelaminated one side with decorative choice lamination and other side balancing white lamination type fixed with screws to timber framework all as specifed and as directed by Engineer-in-Charge.
Supply and fixing in repair continuous (piano) hinges mild steel bright finish width of flap 40 mm (when open) all as specified.
Supply and fixing in repair aluminium die cast body door closed hydraulically regulated designation No. 2 universal type (ISI Make) suitable for door shutters of weight between 36 to 60 Kg complete all as specified.
Supply and fixing in repair door seal 1.5mm thick strip of mild steel with hard brush fixed in door bottom all as specified
Supply and fixing in repair 125mm hasp & staple safety type of aluminum with mild steel hinge including bolt to hinge plate and fixed with screw all as specified (ISI Marked).
Supply and fixing in repair ball catcher with 8 mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed by Engr in charge.
Taking down cement plaster of any description including racking out joint hacking for key scrubbing down with water etc complete all as specified.
Material and labour for 15 mm rendering in CM 1:6 on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified as directed by Engineer-in-Charge.
M&L Rendring 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr in charge.
M&L rendering 5 mm thick in cement plaster 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed by Engr in charge.
Hacking out old broken glass (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one complete all as specified.
Supply and fixing 3.00mm thick sheet plain glass ordinary quality and glazing with oil putty/ wooden beads with nails in square n.exe 0.5 Sqm in each pane complete all as specified and directed by Engr in charge.
Description all as per item no 84 above but figured type pin headed glass complete all as specified and directed by Engr in charge.
Prepration of new plastered surfaces of wall and applying two coats of oil bound distemper with oil emulsion over a coat of 3mm wall putty complete all as specified and directed by Engr in charge.
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash over 3mm thick wall care putty complete all as specified and directed by Engr in charge.
M&L preparation of new plastered surfaces of wall priming with alkali primer and applying two coats of cement based paint complete all as specified and directed by Engr in charge.
Supply and fixing in repair GI wire cloth 0.63 mm nominal dia of wire and avg wide 1.40 mm aperture of tinned tacks of galvanised wire staple to steel windows/fixed with wooden beads of 2nd class HW to wooden doors/windows complete all as specified and directed by Engr in charge.
Supply and fixing MS stove enameled black stay(left and right) for steel window 30cm long with nut and washer fixed in repair complete all as specified and directed by Engr in charge.
Supply and fixing MS stove enameled black handle for steel window left/right with nut and washer fixed in repair complete all as specified and directed by Engr in charge.
S&F 9mm thick ( Nos of ply 5) grade (type BWR rasin) as in repair fixed with nails to timber frame as in celling & panneling complete all as spd.
2nd class hard wood, plain solid straight chowkhats/frames wrought framed and rebated on the solid rounded or chamfered put to gather with glue pinned at joints complete all as specified and directed by Engr in charge.
Floor door stopper of aluminium alloy body and toungue with hard drawn steel spring of 150 mm complete all as specified and directed by Engr in charge.
M&L welding in repairs to refix hinges, bolts, broken window hinges not exc 2.5 cm in length and thickness of metal to be welded n exc 6mm complete all as specified and directed by Engr in charge.
M&L welding in repairs to refix hinges, bolts, broken window hinges exc 2.5 cm but n. exc 5cm in length and thickness of metal to be welded n exc 6mm complete all as specified and directed by Engr in charge.
Re-screwing or easing & adjusting without taking down shutter of any description exc 1Sqm & n.exc 2 Sqm complete all as specified and directed by Engr in charge.
Taking down wooden shutter of any dscription n.exc 1.00 Sqm ,easing and adjusting and than refixing shutters with old builder hardware as required in the same opening complete all as specifed & directed
Description all as per item no 98 above exc. 1 Sqm but n.exc 2.00 Sqm each complete all as specified and directed by Engr in charge.
Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame) and removing to or from store complete all as specified and directed by Engr in charge.
Taking down chowkats or frames exc 1.5 sqm but n exc 4.0 sqm each with shutters (without taking off shutter from the frame) and removing to or from store complete all as specified and directed by Engr in charge.
S/F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specifed and as directed by Engineer-in-Charge.
S/F solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification and drawing & all as specifed and as directed by Engineer-in-Charge..
S&F 30mm thick, 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkatscomplete all as specified and directed by Engr in charge.
S&F 2nd class hardwood 30mm thick glazed and skelton, shutters, open rebated and prepared to receive glass, gauze without sash bars all as specified in SSR Pt I, Section 8, clause 8.20 (a) complete all as specified and directed by Engr in charge.
M&L for factory made Box type steel windows with side hung shutters including Box type hinges with steel handles, two Nos of tower bolts in each leaf with glazing bars complete with factory priming coat complete all as specified and directed by Engr in charge.
S&F in repair 40mm Dia Knob of any description for cupboard, dressing table etc, fixed with screws complete all as specified and directed by Engr in charge.
S&F MS PVC coated brackets made inshape and size to hold certain rods and size of bracket 150mm colour and Pattern approved by GE
S&F MS PVC sheathed 20mm dia drapery rod of approved pattern and shade complete all as specified and directed by Engr in charge.
S&F end balls made in conical surface and coated with brown/cherry/Golden colour dia of ball not less than 50mm and suitable for curtain rod of 20mm dia complete all as specified and directed by Engr in charge.
S&F rounded block made in round shape and coated with brown/cherry/Golden colour suitable for curtain rod 20mm dia complete all as specified and directed by Engr in charge.
S&F GI Nipple of any dia of 15mm/20mm complete all as specified and directed by Engr in charge.
S&F GI sockets of of 15/20mm dia complete all as specified and directed by Engr in charge.
S&F GI Elbow of 15mm /20mm dia complete all as specified and directed by Engr in charge.
S&F GI GI union of 15mm /20mm dia complete all as specified and directed by Engr in charge.
S&F GI Tee of 15mm /20mm dia complete all as specified and directed by Engr in charge.
Removing air lock from GI pipe of any size by opening of joints/fittings and refixing the same after the job is done all as directed by Engr in Charge.
Repair to leakage water in pillar tap, stop cock, angle valve, bib tap of any description by replacing the washer complete all as specified and directed by Engr in charge.
Repair /adjustment to washer/siphon etc for high or low level flushing cistern any type any make including replacement of washer, check nuts, plug etc and making it functional complete all as specified and directed by Engr in charge.
Fixing only in repairs loose existing pelmets boxes by embedding wooden gutties in cement mortar 1:3 with MS clips and screws etc (length of pelmets box n.exc 1.5m) complete all as specified and directed by Engr in charge.
Dismantling wall and ceiling board (fiber, pulp, PVC, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillets.
Dismantling of asbestos cement sheets, corrugated or semi corrugated etc in roof covering complete and set a side all as directed.
S & F in repairs 12 mm thick gypsum ceiling board fixed with screws on and including Galvanized iron with aluminum coating snap grid frame work (size of grid 605x605mm) with fasteners, supports, plugs to walls/ceiling complete as per manufacturer instructions and as directed by Engr-in-Charge.
S& F in repairs Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&f in repair glass putty including taking down old putty and rubbing & cleaning of old steel window frame andglass and refixing the same window complete all as specified and directed by Engr in charge.
Taking down defective aluminium door of size not exceeding 4.00 sqm with glass panes and repairing floor stopper, bearing alingment, including replacement of roller, locking arrengement d pivet, and other minor parts etc reuired for smooth functioning of aluminiu door and refixing in same opening after repair complete all as specified and as direted by Enineer in charge.
Supply and fixing stainless steel peg set of six including screw complete all as specified and as direted by Enineer in charge.
Supply and fixing stainless steel peg set of three including screw complete all as specified and as direted by Enineer in charge.
SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.
Notes: Attending complaints of B/R nature of internal water supply and carpenter work including repair to taps, minor repair to pipes, checking leakage, door easing, loose pelmet refixing, wiremesh door, cumboard , ceiling etc, by deputing qualified trademan (Plumber, carpenter and helper). Beore quoting the rate aginast this item, bidder has to keep in mind the following aspects: 1.Contractor will have to depute adequate number of qualified tradesman and helpers for attending of complaints who will report at the office of AGE B/R daily at 08:30 AM for attending the complaints. 2.Maximum time allowed for attending the complaints is within 24 hours for repair/ replacement of bib tap, pillar taps, stainless steel sink with/without drainage board, stop cock, Angle valve, CP health faucet, etc 3.If any complaint(s) remains unattended is not resolved within the maximum time allowed, a penalty of Rs. 200.00/each complaint will be deducted for the same irrespective of whatever the rate is quoted by the bidder against this item. 4.If contractor fails to depute tradesman/helper at 08.30AM daily to the office of AGE B/R Office, a penalty of Rs 500.00 per day will be deducted for the same irrespective of whatever the rate is quoted by the bidder against this item. 5.Tradesman and helpers will have to be detailed daily and complaints attended daily except Sundays, Gazzetted/National Holidays. 6.All tools and equipments necessary for attending complaints shall be provided by the contractor. 7.After attending complaints satisfactorily, user's signature shall be obtained on complaint slip and be handed over to concerned executive for safe custody and record purpose.
CHAND CONSTRUCTION CO
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .