WBPWD/EE-II/CKHED/ eNIT-51/24-25

Amount

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (RR Cable/KEI/ Polycab) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/ Perspex (wall matching colour) top cover 3 mm thick and incl.175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish as to GS. [Vide page no-E-14,item no-2 ]

a) Average run 8 mtr [Vide page no-E-14,item no-2(c)]

b) Average run 9 mtr [Vide page no-E-14,item no-2(d)]

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [ D-11,15 ] Incoming - 415V, 25/35KA, 160A, FPMCCB [Legrand] (1 -nos) [ D-8,10 ] Outgoing - 10KA, (C-characteristics) 63A, TPMCB [Legrand] (6 -nos) [ D-7,8 ]

a) 6 way [Legrand/ L&T]

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for Vertical enclosure (VTPN) with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment. [D-12,16]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment [D-10, 14] Incoming - 415V,63A, FPMCB Isolator [ Legrand ] (1-nos) [ D-5,6 ] (1-nos) Outgoing - 10KA, (C-characteristics) 6-32A, SPMCB [ Legrand ]- (18-nos) [ D-6,7 ]

a) 6 way [Legrand/ L&T]

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for Horizontal enclosure (TPN DB) with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment. [D-12,16]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [ D-9,13 ] Incoming - 230V,40A, DPMCB Isolator [Legrand] (1-nos) [D-5,6] Outgoing - 10KA, (C-characteristics) 6-32A, SPMCB [Legrand]- (10-nos) [D-6,7]

a) 2+10 way [Legrand/ L&T]

Supply and Delivery of 1.1 KV grade following sizes Al. armoured PVC/XLPE cable (Gloster/Havells/polycab) as mentioned below as per choise of EIC.

a) 4 Core 95 sqmm

Laying of cable above 3½ core 95 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting. [ F-1,2(e) ]

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (Make:- Anchor) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.[Vide page no-E-7, item no-25]

Supply & Fixing 240 V, 3 nos. 6/16A plug socket (Combo) with separate 3 nos. 20A Piano key type switch, indicator & 16A kit-kat flush type fuse (Make:- Anchor) on sheet metal switch board embedded in wall incl. S & F 300x200x65 mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.[Vide page no-E-7, item no-29]

Supply and Fixing 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire(RR Cable/Finolex/ /Polycab/KEI/glostar) as approved by EIC) of the following sizes in 20mm/25mm/32mm the PVC Rigid Conduit 'FR' [Make-Precision] on wall, ceilling with saddle and other accessories as required and mending good damages to building works.

i) 3x1.5 sqmm ECC [ E-9,1(b) & E-16,7(a) ]

ii) 2x2.5 sqmm+1x 1.5 sqmm ECC [ E-9,1(s) & E-16,7(a) ]

iii) 2x4 sqmm+1x 2.5 sqmm ECC [ E-9,1(v) & E-16,7(a) ]

iv) 2x6 sqmm+1x 4 sqmm ECC) [ E-9,1(y) & E-16,7(a) ]

v) 4 x 10 sqmm+2x 6 sqmm ECC) [ E-9,1(d1) & E-16,7(b) ]

vi) 4 x 16 sqmm + 2 x 10 sqmm ECC) [ E-9,1(g1) & E-16,7(b) ]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [ F-5,9 ]

i) 2x2.5 sqmm+1x 1.5 sqmm ECC [ F-5,9(i)]

ii) 2x4 sqmm+1x 2.5 sqmm ECC [ F-5,9(ii&i)]

iii) 2x6 sqmm+1x 4 sqmm ECC) [ F-5,9(iii&ii)]

iv) 4 x 10 sqmm+2x 6 sqmm ECC) [ F-5,9(iv&iii)]

v) 4 x 16 sqmm + 2 x 10 sqmm ECC) [ F-5,9(v&iv)]

Supplying &Fixing following 250 Volt, T8, 18/20 Watt, 4 Ft. long single LED Tube fittings complete with LED tube lamp in built driver&metal heat sink(LT8-20-865-(2)) having at least 100 lumen/watt and cast iron box type fittings.(Make- Philips cat no- TMC 501 P1xT-LED 20W 865 T8)

Supplying & Fixing following 250 Volt, T8, 18/20 Watt, 4 Ft. long Double LED Tube fittings complete with LED tube lamp in built driver&metal heat sink(LT8-20-865-(2)) having at least 100 lumen/watt and cast iron box type fittings.(Make- Philips cat no- TMC 502 P 2xT-LED 20W 865 T8)

Supplying & Fixing of 250 volts, 50Hz, sweep 1420 R.P.M. heavy duty exhaust fan complete with all accessories after making hole on wall and mending good damages as per practicable incl.(Make-EPC) as to Gs.

Supplying & Fixing of 250 volts, 50 Hz 1200mm (48”) sweep A.C. ceiling fan complete with all accessories viz. down Rod, Canopy, Fork etc. including connections as reqd. as per choice of E.I.C. (Make-Crompton HS plus/ Orient Energy star)

Supply & Fixing of AC 250V, 18'' Inch(450mm) dia,1420 R.P.M doubal ball bearing, four bladed full metal body air- circular fan. [Make: EPC/Colour-Brown]as directed by EIC.

Supply 2TR capacity concealed type Split Air Conditioner of rated cooling capacity of 24000 BTU/hr. with 1Nos. rotary compressor, 1nos. IDU of rated power supply-230V-1ph-50Hz. Air-flow/per IDU:- 800CFM & wireless remote. ( Make: Hitachi/Mitsubishi-Electric/voltas)

Copper Refrigeration pipe line for liquid and suction line with fittings, elbows, bends, supports & brackets (Make-Ryoku)

a) Liquid Line (1/4" OD with 0.6 mm thick)

b) Suction Line (5/8" OD with 0.7mm thick)

Erection & Commissioning Charges incl. refrigerant R-410A / R-22 for 2 TR concealed type Split Air Conditioner

Supply & Fixing Pipe Insulation in liquid & suction line with 9mm nitrile rubber tube (Accoflex)

a) Liquid Line (1/4" OD with 0.6 mm thick)

b) Suction Line (5/8" OD with 0.7mm thick)

Control copper Cabling from Condensing Unit to control panel (Make: polycab/finolex)

a) 4 core 2.5 sq.mm communication cable

S & L of Drain Water piping work out of PVC / HDPE hard pipes of following sizes incl. fitting, accessories, bends, elbows, tees, flanges, tapings, wall sleeves, hangers, supports, anchors.

a) 25 mm dia

Charges for scaffolding arrangement incl. lifting for outdoor & indoor units

Supplying, fabrication & fixing M.S u-channel of 6 mm thick of size (75 mm x 40 mm x 40 mm) for making platform for installation of outdoor unit of Concealed split AC incl. drilling 2 nos holes in each channel including cutting holes into the wall & grouting the same with cement concrete (1:1 ½ :3) etc. fabricated with horizontal angle of 25 mm x 25 mm x 6 mm including supporting angle 50 mm x50mm x 6 mm in each platform in outer edge for transmitting the load centrally through 2Nos. (50 mm x 50 mm x 6 mm) Angle inserted into the exiting wall. The entire structure should be barricaded & safe for ODU maintenance. Area of the platform is 3Mtr. x 1.2Mtr. Structural design should be approved by E.I.C.

Rate should be quoted incl. of all taxes and cess.

Defect Liability period : 1)1 year

GHANASHYAM ELECTRIC STORES (BID ID -5612845)

STANDARD BUILDERS (BID ID -5585309)