Tender ID

Karnataka

Active

Works

Buildings

SUPPLYING OF FURNITURES AND ALUMINIMUM PARTION AND 4 OFFICER ROOMS FURNITURE WORKS AND CC TV ASSEMBLY INSTALATTION AND REPAIRS WORK AT DISTRICT HEALTH AND FAMILY WELFARE DEPARTMENT

Rural Development and Panchayat Raj Department

RDPR Division Office Koppal | Koppal, Karnataka

Amount: ₹20.1 LCloses: 19 Nov 20265d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published12 Nov 2026
Closes19 Nov 2026

Tender Value

₹20.1 L

EMD Value

₹50,000

Closing Date

19 Nov 2026, 4:30 pm5d left

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

EE PRE DIVISION KOPPAL

Office Number

Work Description

SUPPLYING OF FURNITURES AND ALUMINIMUM PARTION AND 4 OFFICER ROOMS FURNITURE WORKS AND CC TV ASSEMBLY INSTALATTION AND REPAIRS WORK AT DISTRICT HEALTH AND FAMILY WELFARE DEPARTMENT

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT29753

Reference Number

RDPR/2026-27/BD/WORK_INDENT29753

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Koppal

Source Website

Subscribe to view

Documents Required

10 documents required · 10 mandatory

Technical Bid

RequiredPRED/PWD Registration Certificate

RequiredTenderer must Submit PAN & GST Certificate.

RequiredWork orders /commitments of ongoing works issued by an officer not below the rank of Executive Engineer

RequiredWork done certificate for Similar nature of Work from Competent authority Rank of Executive Engineer & above

RequiredAnnual Turnover Certificate for at least last five years

RequiredUDIN is Preferred

RequiredTenderer must mandatorily submit his present accurate postal address and phone number in a signed letterhead.

RequiredBidder should submit completed work, Work done certificate if in case they submit the workdone certificate as on ongoing work. Such Bidder will be disqualified

RequiredOngoing works Bidder shall compulsorily submit details of all PHYSICAL ONGOING WORKS on their official letterhead, duly signed & stamped NIL declaration shall result in disqualification

RequiredSIMILAR NATURE OF WORKDONE FIFTY PERCENTAGE 2021-22 to 2025-26 with Indent Number Compulsory Otherwise Tender will cancelled

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)

Since the responsibility of Department is more in the lapsable grant work, Hence any objection and court matters will not be entertained.

Since the proposed work is lapsable grant head and treasury will closed in february hence the work should be completed before 15th January 2027 if any delay department will not be held responsible.

Working methodology: Before finalising L1, the bidder shall submit a work methodology & resource plan for department of screutiny & approval.

Ongoing works: Bidder shall compulsorily submit details of all PHYSICAL ONGOING WORKS on their official letterhead, duly signed & stamped. NIL declaration shall result in disqualification.

Bidder should submit completed work, Work done certificate if in case they submit the workdone certificate as on ongoing work. Such Bidder will be disqualified

Single Tender Will Not Be Accepted

THIS WORK IS RANDOMISED AS OTHER WORK.

The Tenderer shall obtain Similar Nature of Work done certificate will be Considered financial years of 2021-22 to 2025-26 (50% of the Amount Put to Tender) i.e Rs.20.07 lakhs in the prescribed format from the Competent Authority not below the rank of Executive Engineer(District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid.

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2021-22, 2022-23, 2023-24,2024-25, & 2025-26 achieved in One financial year should be more than financial turnover of Rs. 20.14 Lakhs (in all classes of civil engineering construction works only)

The tenderers must submit the scanned documents in pdf / jpeg form, not in other form and which are should not be corrupted files. If it shows errors while opening the documents the employer is not responsible. Hence the such files will be considerd as un submitted.

As per Government order No. FD 56 PWD cell 2004, Bngalore, 18th Janury 2005, The contractor shall be made responsible for submiting e-bills duly suported the hard copy of detailed measurements of work. using electrinic spreadsheets and making computation thereof. The conctractor shall submit diskette/ CD room in addition the hard copy.

Successful bidder submitting bids below the amount put to tender will be regularized to submit the difference amount in the form of FDR/BG/SD/Pledge on the name of EE PRED Koppal within 15 days from the date of receiving the letter of acceptance. additional security paid for unbalanced tenders Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008.

Any objection regarding the tender must be submitted directly to Executive Engineer , not in inward.

Tenderers must have valid PRED/PWD registration and must submit PRED/PWD registration copy

The tender may be cancelled at any stage without assigning any reason

Tenderer must mandatorily submit his present accurate postal address and phone number in a signed letterhead.

Executive Engineer PRED Koppal has authority to accept or reject any tender without assigning reason

If any date in the tender time table is government holiday, next working date will be considered

All the materials to be utilised for the work must be tested in PRED labs/ 3rd Party Consultant and Quality control test reports must be enclosed to the bills mandatorily.

To qualify for award of this contract, each tenderer should give all details and documents as per Technical and Financial bid attached to this tender.

All the scanned documents pertaining to bidder to be uploaded shall be in original and same originals should be produced to the Executive Engineer (at the time of Technical Bid Opening) who reserves right to verify the original documents before approval.

For Details Refer Tender Notification And Conditions In The Bid Documents.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of kppp-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

Fee & Financial Details

Tender Fee Amount

₹510

EMD Fee Amount

₹50,000

Important Dates

Last Activity

12 Nov 2026

Published

12 Nov 2026

Download Ends

16 Nov 2026

BOQ Preview

•

Demolishing brick work manually/ by mechanical means including stack- ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-i...

•

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement ...

•

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

•

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 15...

•

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, incl...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

•

Providing and fixing double glazed hermetically sealed glazing in alu- minium windows, ventilators and partition etc. with 6 mm thick clear float Glass both side, having 12 mm air gap, includi...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

•

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

•

C P Brass long Body bibcock 15 mm

•

Providing and fixing double glazed hermetically sealed glazing in alu- minium windows, ventilators and partition etc. with 6 mm thick clear float Glass both side, having 12 mm air gap, including provi...

•

Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...

•

Providing & Fixing of High Acoustical False Ceiling having NRC (Noise Reduction Coefficient) 0.90 (minimum) using Integral Densified edged Eco Friendly Fully Perforated Lightweight Calci...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing...

•

Providing and fixing in wall lining flat pressed three layer (medium den- sity) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, ...

•

Providing and supplying Kitchen cabinet with 19mm thick one side Architect recommended decorative Acrylic glossy or Matt finished laminate (1.5mm thick) and other side balanci...

•

Providing and fixing Three seater Sofa with cushion of size 7(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engine...

•

Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered Glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate

•

Supply of office table of Size 1370 W X 690D X 740H mm, Two sets of storage units with 3 drawer unit 1 box and 1 file drawer unit.Ideal for Executives and Managers. spacious table withdouble storage.I...

•

S Type Chair : Supply of Mid-back Chair With Fixed armrest with Padding: Backrest Height (Lowback range: 200-400 mm, Mid-back range: 400 - 700 mm) : Mid-back, Backrest Width (Low: 400-550 mm, Mid: 550...

•

Executive Chair : Supply of Executive chair with High Back Tilt mechanism Synchronic tilt mechanism Locking mechanism Multi position locking Seat depth edjustment Fixed type Revolving mechanism Design...

•

Printing New Letter and Figures of any Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade

•

Supplying heavy gauge PVC conduit pipe . dia . mm thick

•

confirming to IS 2509 with suitable size bends, junction boxes,

•

adhesive paste etc , and fixing using inverted wood plugs in case of

•

Supplying and flush mounting teak wooden box without front plank,

•

made of not less than 12 mm thick wood, after due groove cutting,

•

finishing with necessary cement plastering complete.8" x 6" x 3" (20...

•

Supplying and fixing of modular switch & connected accessories on

•

existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket

•

Supplying and mounting 2 Nos. of 2Way 6 A flush type switches

•

either surface/flush mounted on existing gang box or in 4mm thick

•

plastic sheet and mounted on a flush mounted wooden box and wiring

•

Supplying & fixing of retrofit type - LED bulb . W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life25000 burning hours and Compliance ...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated

•

1100V grade, multistrand copper wire with low conductor resistance

•

single core in open or concealed system of wiring with specified IS...

•

R.C.H.O CHAMBER

•

Providing & Fixing of High Acoustical False Ceiling having NRC (Noise Reduction Coefficient) 0.90 (minimum) using Integral Densified edged Eco Friendly Fully Perforated Lightweight Calci...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing...

•

Providing and supplying Kitchen cabinet with 19mm thick one side Architect recommended decorative Acrylic glossy or Matt finished laminate (1.5mm thick) and other side balanci...

•

Supplying heavy gauge PVC conduit pipe . dia . mm thick

•

confirming to IS 2509 with suitable size bends, junction boxes,

•

adhesive paste etc , and fixing using inverted wood plugs in case of

•

Supplying and flush mounting teak wooden box without front plank,

•

made of not less than 12 mm thick wood, after due groove cutting,

•

finishing with necessary cement plastering complete.8" x 6" x 3" (20...

•

Supplying and fixing of modular switch & connected accessories on

•

existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket

•

Supplying and mounting 2 Nos. of 2Way 6 A flush type switches

•

either surface/flush mounted on existing gang box or in 4mm thick

•

plastic sheet and mounted on a flush mounted wooden box and wiring

•

Wiring for lighting/power circuit using one of FRLS PVC insulated

•

1100V grade, multistrand copper wire with low conductor resistance

•

single core in open or concealed system of wiring with specified IS...

•

D F W O CHAMBER

•

Providing & Fixing of High Acoustical False Ceiling having NRC (Noise Reduction Coefficient) 0.90 (minimum) using Integral Densified edged Eco Friendly Fully Perforated Lightweight Calci...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing...

•

Providing and supplying Kitchen cabinet with 19mm thick one side Architect recommended decorative Acrylic glossy or Matt finished laminate (1.5mm thick) and other side balanci...

•

Supplying heavy gauge PVC conduit pipe . dia . mm thick

•

confirming to IS 2509 with suitable size bends, junction boxes,

•

adhesive paste etc , and fixing using inverted wood plugs in case of

•

Supplying and flush mounting teak wooden box without front plank,

•

made of not less than 12 mm thick wood, after due groove cutting,

•

finishing with necessary cement plastering complete.8" x 6" x 3" (20...

•

Supplying and fixing of modular switch & connected accessories on

•

existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket

•

Supplying and mounting 2 Nos. of 2Way 6 A flush type switches

•

either surface/flush mounted on existing gang box or in 4mm thick

•

plastic sheet and mounted on a flush mounted wooden box and wiring

•

Wiring for lighting/power circuit using one of FRLS PVC insulated

•

1100V grade, multistrand copper wire with low conductor resistance

•

single core in open or concealed system of wiring with specified IS...

•

Providing & Fixing of High Acoustical False Ceiling having NRC (Noise Reduction Coefficient) 0.90 (minimum) using Integral Densified edged Eco Friendly Fully Perforated Lightweight Calci...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing...

•

Providing and supplying Kitchen cabinet with 19mm thick one side Architect recommended decorative Acrylic glossy or Matt finished laminate (1.5mm thick) and other side balanci...

•

Open Conduit System : Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs ...

•

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete.

•

Wooden Box 8" x...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

•

6A Three Way socket = 6.00

•

Supplying and mounting 2 Nos. of 2Way 6 A flush type switches either surface/flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring as pe...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Providing & Fixing of High Acoustical False Ceiling having NRC (Noise Reduction Coefficient) 0.90 (minimum) using Integral Densified edged Eco Friendly Fully Perforated Lightweight Calci...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing...

•

Providing and supplying Kitchen cabinet with 19mm thick one side Architect recommended decorative Acrylic glossy or Matt finished laminate (1.5mm thick) and other side balanci...

•

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete.

•

Wooden Box 8" x...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

•

6A Three Way socket

•

Supplying & fixing of retrofit type - LED bulb . W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance ...

•

Providing & Fixing of High Acoustical False Ceiling having NRC (Noise Reduction Coefficient) 0.90 (minimum) using Integral Densified edged Eco Friendly Fully Perforated Lightweight Calci...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing...

•

Providing and supplying Kitchen cabinet with 19mm thick one side Architect recommended decorative Acrylic glossy or Matt finished laminate (1.5mm thick) and other side balanci...

•

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. Wooden Box 8" x...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket

•

Cc Camera Set with 27” Monitor : RNC Type of Camera Housing Bullet Camera PTZ Camera / Speed Dome Camera No 4MP (2560x1440) or better, : CC Camera : Sparsh Type of Camera Housing Bullet Camera PTZ C...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW 1 OTHERS.docx

Tender Document • 0.09 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Active

Works

Buildings

SUPPLYING OF FURNITURES AND ALUMINIMUM PARTION AND 4 OFFICER ROOMS FURNITURE WORKS AND CC TV ASSEMBLY INSTALATTION AND REPAIRS WORK AT DISTRICT HEALTH AND FAMILY WELFARE DEPARTMENT

Rural Development and Panchayat Raj Department

RDPR Division Office Koppal | Koppal, Karnataka

Amount: ₹20.1 LCloses: 19 Nov 20265d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published12 Nov 2026
Closes19 Nov 2026