Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.6 LAccepted-AOC R O 6 PATEL NAGAR LAST MORH JAMMU | JAMMU | JAMMU AND KASHMIR | 180001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹29.5 L+₹1.9 L (6.76%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹34.8 L+₹7.2 L (26.1%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Others-The bidder has not uploaded Registration card |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
13 Mar 2023, 2:00 pmClosed
Executive Engineer University works department
Executive Engineer University works department
Construction of parking lot and other allied works for facilitating the smooth internal traffic movement of students residents and other visitors at New Campus including provision for crossing battery car at New Campus
2023_UDJK_206782_1
enit 758 dated 01-03-23
Open Tender
Civil Works
Item Rate
180 days
University of Jammu
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,360
Executive Engineer University Works department
₹80,000
31 Jan 2025
2 Mar 2023
15 Mar 2023
2 Mar 2023
13 Mar 2023
2 Mar 2023
Amount
JCB Engaged for levelling of ground and removal of Extra mulba/Earth to the nearby trench including the cost of POL and shifting charges
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed All kinds of soil :
Supply and filling of River Bed material including spreading, Watering and Consolidation with Power road roller of 6 to 8 tonne Capacity
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing G.I Chain Link Fabric Fencing of required width in mesh size 50x50mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of the Engineer-in-charge. (Made of G.I Wire of 04 mm dia)
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, Two or more coats on New work.
Carriage of Materials by mechanical Transport Stone Agg below 40mm
----------do------------ Stone Aggregates Above 40mm
---------do-------------- Sand
---------do--------------- 60mm Thick Interlocking Tiles
M/S SUDHANSHU RAINA
Norzone Technos (OPC) Private Ltd
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .