REPAIR AND MAINTENANCE OF INTERNAL ELECTRIFICATION, FITTING AND FIXTURES INCLUDING EARTHING OF OTM ACCN INCLUDING TUNNEL LIGHTS AT NSRY COMPLEX UNDER GE(SB) KARWAR.

Amount

Taking down unsv copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. all as specified and directed.

M & L for surface point wiring 1100 Volts grade 1.5 Sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC casing & capping with all accessories in wall/ ceiling/ floor/ roof etc, sunk pressed steel or cast iron terminal boxes with 3 mm thick plastic laminated sheet top cover including 1.5 Sqmm PVC insulated FRLS unsheathed 1100 Volts multistranded copper conductor conforming to IS:694:1990 with ISI marking as continuous earth wire connected to common earth dolly all as specified and directed for the following:-

(a) One light/fan point controlled by one switch

(b) One 3 pin socket outlet 5 Amp on same board with other switches

(c) One 3 pin socket outlet 5 Amp on independent board

(d) One bell point controlled by one push button on the same board with other switches or independent with cables of 1.5 Sqmm size.

Description all as per item No 2.00 here-in-before but with cables 2.5 Sqmm for one 3 pin socket outlet 15 Amps on independent board.

Description all as per item No 2.00 here-in-before but with cables 4 Sqmm for one 3 pin socket outlet 15 Amps on independent board.

M & L in repair for point wiring with 1.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continuous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable draw in existing conduit and making good disturbed surfaces to match with the existing surface complete all as specified and directed by Engr-in-Charge for the followings.

(a) One light/fan point controlled by one switch

(b) One 3 pin socket outlet 5 Amp on same board with other switches.

(c) One 3 pin socket outlet 5 Amp on independent board.

(d) One bell point controlled by one push button on the same board with other switches or independent with cables of 1.5 Sqmm size.

Description all as per item No 5.00 here-in-before but with cables 2.5 Sqmm for one 3 pin socket outlet 15 Amps on independent board.

Description all as per item No. 5.00 here-in-before but with cables 4 Sqmm for one 3 pin socket outlet 15 Amps on independent board.

S & F in repair switch piano 5 Amps one way flush type complete all as specified and directed. . Make:-Philips/Schneider/Anchor

Supply and fixing in repair of bell push switch piano flush type 5 Amps, SP, 230 Volts AC all as specified. Make:-Philips/Schneider/Anchor

Supply and fixing in repair of switch piano flush type 15 Amp, SP, one way 230 volts AC all as specified. Make:-Philips/Schneider/Anchor

S & F in repair socket outlet 2 in 1, 3 pin, 5 Amps flush type, complete all as specified and directed.. Make:-Philips/Schneider/Anchor

S & F in repair socket outlet 2 in 1, 3 pin, 5 and 15 Amps flush type, complete all as specified and directed.. Make:-Philips/Schneider/Anchor

S & F in repair switch socket combination 5 Amps, 3 pin, flush type multi purpose complete all as specified and directed.

S & F in repair switch socket combination 2 in 1, 3 pin, 5 and 15 Amp, flush type universal complete all as specified and directed.

S & F in repair of electronic type fan regulator suitable for 1200/1400 mm ceiling fan complete all as specified and directed. Make:-Philips/Schneider/Anchor

S & F in repair bell electric (ding dong bell) 230 volts AC, single phase complete all as specified and directed. Make:-Philips/Schneider/Anchor

S & F in repair, ceiling rose surface bakelite 65 x 50 mm three terminal on and including PVC junction box of suitable size complete all as specified and directed

Supply & fixing in repair, 6-32 A, 240V, 10KA, C Curve , MCB Single poles with connection testing and commissioning complete all as specified and directed. Make:-Legrand / Indoasian /Schneider/Havells.

Supply and fixing in repair , 32 Amps, 240V, 10KA, C Curve , MCB SPN with connection testing and commissioning complete all as specified and directed. Make:-Legrand / Indoasian / Schneider /Havells.

Supply and fixing in repair, 16-32 Amps, 415V, 10KA, C Curve , MCB TPN with connection testing and commissioning complete all as specified and directed. Make:-Legrand / Indoasian /Schneider/Havells.

Supply and fixing in repair , 40-100 Amps, 415V, 10KA, C Curve , MCB TPN with connection testing and commissioning complete all as specified and directed. Make:-Legrand / Indoasian /Schneider/Havells.

Supply and fixing in repair, metal clad plug top 20 Amp, 230 volts AC complete all as specified and directed. Make:-Legrand /Indoasian /Schneider/Havells

Supply and fixing in repair, metal clad socket outlet 20 Amps, 230 volts AC complete all as specified and directed. Make:-Legrand / Indoasian /Schneider/Havells

Taking down old submain wiring cable of any size/ type alongwith earth wire with or without concealed/ surface conduit/ casing capping complete all as specified and directed.

M & L in replacement, sub main wiring with proper colour coding, FRLS PVC insulated copper conductor, unsheated, multi-stranded, copper conductor, cable of two runs of 6 Sqmm for phase and neutral and one run of 4 Sqmm for earth wire, drawn through and including PVC casing and capping with all fittings like tee, bends, junction box/ terminal box fixed on wall/ ground/ ceiling etc and connected complete all as specified and directed by Engr-in-Charge. Note: Phase should be of Red/ Yellow/ Blue, neutral should be of black and earthing wire should be of green colour. Two runs of cable for phase/ neutral and one run of cable for earth will be measured and paid as one unit length.

M & L in replacement, sub main wiring with proper colour coding, FRLS PVC insulated copper conductor, unsheated, multi-stranded, copper conductor, cable of two runs of 6 Sqmm for phase and neutral and one run of 6 Sqmm for earth wire, drawn through existing conduit fixed in wall/ ceiling etc and connected complete all as specified and directed by Engr-in-Charge. Note: Phase should be of Red/ Yellow/ Blue, neutral should be of black and earthing wire should be of green colour. Two runs of cable for phase/ neutral and one run of cable for earth will be measured and pais as one unit length

Description all as per item No 26.00 here-in-before but 4 Sqmm for phase and neutral and one run of 4 Sqmm for earth wire complete all as specified and directed.

S & F in repair, lamp holder, PVC/ polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S & F in repair MCB DB SPN, 12 way, 240 Volt, double door powder coated sheet steel enclosure for surface mounting fitted with 200 Amps bus bar and din channel complete all as specified and directed.

S & F in repair MCB DB SPN, 8 way, 240 Volt, double door powder coated sheet steel enclosure for surface mounting fitted with 200 Amps bus bar and din channel complete all as specified and directed.

S & F in repair MCB DB TPN, 4 way, 415 Volt, double door powder coated sheet steel enclosure for surface mounting fitted with 200 Amps bus bar and din channel complete all as specified and directed.

Supply and fix in replacement 3 gang mounting enclosure Suitable for industrial standard socket 3 pin 250 Volt, 16 Amps complete all as specified and directed Make- as per cat part no 56RC of cliipsal make.

Supply and fix in replacement current circuit protection switch 2 pole 250 Volt, 20 Amps, 30mA, 3 terminal surface mounted complete all as specified and directed Make- cliipsal-56 series make.

Supply and fix in replacement industrial standard socket 3 pin 250 Volt, 16 Amps complete all as specified and directed. Make- as per Cat No : 56 SO 316RPLE of Clipsal make.

Supply and fix in replacement industrial switch,3 Pole, 500 Volt, 20 Amps complete all as specified and directed. Make- as per Cat No : 56SW320RPLE of Clipsal make

Supply and fix in replacement 2 gang mounting enclosure Suitable for industrial round pin socket 5 pin 500 Volt, 32 Amps complete all as specified and directed.

Supply and fix in replacement industrial standard straight plug IP 66, 3 pin 250 Volt, 16 Amps complete all as specified and directed. Make as per Cat No : 56 SO 316RPLE of Clipsal make.

Supply and fix in replacement dustrial switch 3 pole 500 Volt, 32 Amps complete all as specified and directed. Make- as per Cat no 56SW332LEGY of clipsal make.

Supply and fix in replacement industrial round pin socket 5 pin 500 Volt, 32 Amps complete all as specified and directed. Make - clipsal.

Supply and fixing in replacement T8 LED tube rod 18/20 W, 4 feet length, 6000 K complete with all accessories as specified and as directed. Make : Havells LHFXCENNTN1W020/Bajaj/Philips or equivalent.

Supply and fixing in replacement 10 watt LED box type light fittings 2 feet including making necessary connection complete all as specified and directed. Make : Havells /Bajaj/Philips or equivalent.

Supply and fixing in replacement LED tube light fitting 1 x 18 watt , 230 V including tube rod with PC diffuser of 4 feet made of CRCA sheet , industrial type, complete with all accessories and pre-wired incl all necessary electric connections with three core copper cable complete all as specified and directed. Make Bajaj cat part no BLRB-DB 118 /Havells/Philips/ Wipro/ C&S or equivalent

Supply and fixing in replacement LED Batten 20 watt, 6500k with white acrylic cover sleek design & high efficiency for wall and surface mounted of 4 feet with all connected accessories including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make : Bajaj code- BCLSB20 W WH / Havells/Philips/ Wipro/ C&S/ Shakti or equivalent

Supply and fixing in replacement motion sensor 20 watt LED batten auto on dim, 6500 K, 4 feet complete with all connected accessories including connecting up with twin core flexible copper conductor cable of suitable size complete all as specified and directed. Make :Bajaj code- 830459 or Philips/ Wipro/ C&S/ Shakti or equivalent

Supply and fixing in replacement LED 36 watts, 220 V AC recessed type, 2ft x 2ft luminaire with white powder coated CRCA housing, seamless front frame with flat white high transmission acrylic cover, high efficiency LEDs specially designed for sensitive areas suitable for roof ceiling including connecting up with driver three core copper conductor of suitable size complete all as specified and directed. Make- Bajaj cat part no BZRSQL 36W LED WH Philips/ Wipro/ C&S/ Shakti or equivalent.

Supply and fixing in replacement LED 36 watts, 220 V AC recessed type, IP 54, white powder coated CRCA housing 2ft x 2ft luminaire with high power LEDs specially designed for sensitive areas suitable for roof ceiling including connecting up with driver three core copper conductor of suitable size complete all as specified and directed. Make- Bajaj cat part no BZSSQL 36W LED G54 WH or equivalent make.

Supply and fixing in replacement LED Bulb 9 watts, with retro B22 base, auto cut off after battery full charge, lighting back up of up to 4 hrs overcharging protection, 220 V AC complete all as specified and directed. Make syska model no -SSK-EMB or equivalent make.

Supply & fixing in replacement copper conductor pvc insulated sheathed cable 3 core 2.5 sqmm FR grade ,fixed on wall/ ceiling with suitable size of saddles screws etc including taking down existing cable all as specified and directed.

Testing of existing earthing complete including watering for improving the resistance of earthing complete all as specified and directed.

Taking down carefully existing building security light/ Industrial work shop high /mid bay luminaires of any type,in any height rectifing the defects by repairs /replacement of Capacitor/ballast/ignitor/lamp and tightening the loose connection etc & refixing in position complete all as directed. Note : Rates are deemed to include changing of spares "Supply only in repairs" under relevant items of this schedule hereinafter and the Ladder/sceisor lift/T&P for rectifying the defects at the ceiling of mid bay/high bay height as well as security light.

S & F in replacement LED 80 watt industrial high bay luminaire LED midbay with PDC housing, integrated PC optics, 4kv in built and 10kv external surge protection, IP66 ingress protection with additional safty chain, suitable for ceiling (surface/ suspended) mount all as specified and directed. Make Bajaj as per Confirming to cat part No TENTO NEXT B 88 L WH NB SD or or Equivalent in Crompton/Philips.

Supply and fixing in replacement of old unsv High bay light fittings with highly efficient next Gen with eliptical design, secondary modular lens optics for optimised light distribution to improve operational efficiency, with EMC/EMI Compliant potted driver & easy maintenance, flicker free illumination for industrial space,having capacity 200 Watts all as specified and directed Confirming to Bajaj cat part No BIHNK 200W WH NB TG SD or Equivalent in Crompton/Philips.

M & L in replacement earthing complete with galvanized cast iron earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of earth plate not less than 1.5 m below normal ground level connected to galvanized earth lead 4 mm dia by means of bolts, nuts washers and check nuts of steel/ GI duly protected with 15 mm bore light grade pipe upto main board, 20 mm bore watering pipe light grade with CI/ MS funnel and wire mesh including excavation, earth work in any type of soil and removing the surplus soil to a distance not exceeding 50 m, charcoal dust and common salt in adequate qty all as shown in electrical plate No 3 of SSR Part-I 2009 having pit and cover in PCC 1:2:4 type B-1 including angle iron frame made of angle iron of size 40 x 40 x 6 mm grouted in PCC pit for PCC cover, funnel with wire mesh complete and all as specified and directed by Engr-in-Charge. NOTE: The unit rate quoted shall be deemed to include for necessary excavation and earth work, PCC 1:3:6 type C-1 chamber, funnel with GI medium grade watering pipe 15 mm bore, RCC cover slabs 50 mm thick with 8 mm dia CTD bars @ 140 mm C/C both way etc.

Taking down ceiling fan/ exhaust fan of any sweep, dismantling, replacing defective part, overhauling, cleaning, greasing, rewinding etc and hanging up/ fixing back in the original position, connecting up and testing complete all as directed. NOTES: (a) The unit rate quoted shall deemed to include for minor items viz 'U' clamps with rubber reel, bolts, nuts, washers and safety pin/split pin and rubber wheel etc. (b) Capacitor & bearing shall be measured and sperately under respective items. (c) Rewinding of fan will be measured and paid for separately under respective items.

S & F in repair capacitor of 2.5 mfd for ceiling fan/exhaust fan complete all as specified and directed.

S & F in repairs bearing No 6201/6202/6203 suitable for ceiling fan/exhaust fan complete all as specified and directed.

M&L for Rewinding of ceiling fan 1200/1400 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enamelled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including replacement gun metal bush, ball bearing where ever required.

M&L for Rewinding of exhaust fan of 230/300/380 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enamelled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including replacement gun metal bush, ball bearing where ever required.

Supply and fixing in repair of Down rod of 1' height fabricated out of MS pipe 12mm dia heavy duty duly painted with one coat of white paint complete all as specified.

Supply and fixing in repair of Down rod of fabricated out of MS pipe 12mm dia heavy duty complete all as specified and directed.

Supply and fixing in repair of Canopy of Ceiling fans of 1200/1400mm sweep size heavy duty duly painted with one coat of white paint complete all as specified.

Supply and fixing in repair of blade of Ceiling fans of 1200/1400mm sweep size heavy duty duly painted with one coat of white paint complete all as specified.

Supply and fixing in repair of blade of exhaust fans of 230/300/380/450 mm sweep size heavy duty duly painted with one coat of paint of suitable colour complete all as specified.

Supply and fixing in repair of metal frame of exhaust fans of 230/300/380/450 mm sweep size heavy duty duly painted with one coat of paint of suitable colour complete all as specified.

Supply and fixing in repair of motor of exhaust fans of 230/300/380 mm sweep size heavy duty duly painted with one coat of paint of suitable colour complete all as specified.

M&L for spray painting two coat (white colour) with synthetic enamel paint to Ceiling fans/Exhaust fan of any capacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking MES No with black paint complete all as specified and directed by Engineer-in-charge.

M & L in replacement of GI tube 80 mm of light grade complete all as specified and directed.

M & L in replacement of LED post-top, 40 watts,warm white made on die cast aluminium with innovative glare free indirect lighting distribution, IP 65, energy saving, environmental friendly,complete all as specified and directed Confirming to Havells cat part No BRIL 40 W LED WW or Equivalent in Crompton/Philips.

Supply and fixing in replacement of decorative wall light, stainless, rust free fixture with white glass diffuser suitable for 9 watt LED filament lamp E27 Base including connecting up with copper conductor of suitable size complete all as specified and directed.

S & F in repair LED 100 watt industrial high bay luminaire LED midbay with PDC housing, integrated PC optics, 4kv in built and 10kv external surge protection, IP66 ingress protection with additional safty chain, suitable for ceiling (surface/ suspended) mount all as specified and directed. Make Bajaj as per Confirming to cat part No BIHNK 100W WH NB TG SD or or Equivalent in Crompton/Philips.

Supply and fixing in replacement of edge lit sleek square recessed mounted LED downlight 12 Watt with white powder coated die cast housing and diffuser for low glare illumination all as specified and directed. Make Bajaj as per cat part no BGSLO SLEEK RECESS SQ 12W WH LED or equivalent in havells/philips.

Supply and fixing in replacement of edge lit sleek round recessed mounted LED dounlight 12 Watt with white powder coated die cast housing and diffuser for low glare illumination all as specified and directed. Make Bajaj as per cat part no BGSLO SLEEK RECESS RD 12W WH LED or equivalent in havells/philips.

ANKIT SHIP REPAIRERS AND SUPPLIERS

PEGASOS ENGINEER TRADERS

M/S VERNEKAR AGENCIES