KMC/WS/GRWW/T-19/2019-20

Amount

SUPPLY, FABRICATION, FITTING & FIXING OF CUBICAL TYPE BACK & FRONT OPEN BASE MOUNTED LT CONTROL DESK FOR VCB ASSEMBLING HAVING A SIZE OF 2 NOS 1200 X 2100 X 900 MM MADE OF 14 SWG THICK MACRCA SHEET STEEL ENCLOSER. MS SHEET

SUPPLY, FABRICATION, FITTING & FIXING OF CUBICAL TYPE BACK & FRONT OPEN BASE MOUNTED LT CONTROL DESK FOR VCB ASSEMBLING HAVING A SIZE OF 2 NOS 1200 X 2100 X 900 MM MADE OF 14 SWG THICK MACRCA SHEET STEEL ENCLOSER. MS FABRICATION WITH 25 X 25 X 5 ANGLE.

SUPPLY, FABRICATION, FITTING & FIXING OF CUBICAL TYPE BACK & FRONT OPEN BASE MOUNTED LT CONTROL DESK FOR VCB ASSEMBLING HAVING A SIZE OF 2 NOS 1200 X 2100 X 900 MM MADE OF 14 SWG THICK MACRCA SHEET STEEL ENCLOSER. WELDING IN M.S. STRUCTURAL WORK WITH GAS OR ELECTRIC. CONTINUOUS WELD

PRIMING ONE COAT ON STEEL OR OTHER METAL SURFACE WITH SYNTHERTIC OIL BOUND PRIMER OF APPROVED QUALITY INCLUDING SMOOTHING SURFACES BY SAND PAPERING ETC.

PAINTING WITH BEST QUALITY SYNTHETIC ENAMEL PAINT OF APPROVED MAKE AND BRAND INCLUDING SMOOTHING SURFACES BY SAND PAPERING ETC. INCLUDING USING OF APPROVED PUTTY ETC. ON SURFACE, IF NECESSARY.ON STEEL OR OTHER METAL SURFACE WITH SUPER GLOSS (HIGH – GLOSS) TWO COATS (WITH ANY SHADE EXCEPT WHITE)

MULTIFUNCTIONAL METTER.

SUPPLY & FIXING OF ANALOG VOLTMETER RANGING FROM 0-500 V OF 144 MM SQ SIZE (MAKE: AE/KAPPA/ IMP)

SUPPLY OF MNX 80 CONTACTOR

TRIP-NEUTRAL-CLOSE BREAKER CONTROL SWITCH LOCKABLE 660 VOLT AC 20 A FOR HT SWITCH GEAR.

SUPPLY OF DIGITAL INDICATION FOR BUS OF CONTROL DESK.

SUPPLY & FIXING OF 230/240 V, LED INDICATING LAMP (MAKE: AE/KAPPA/ IMP) BLUE/WHITE COLOR.

SUPPLY & FIXING OF 230/240 V, LED INDICATING LAMP (MAKE: AE/KAPPA/ IMP)OTHER THAN BLUE/WHITE COLOR.

SUPPLY OF DISCONNECT TERMINAL BLOCK FOR CONNECTION WITH CT TO CONTROL DESK.

2.5 SQMM 'FR' STRANDED COPPER WIRE.

SUPPLYING & FIXING COMPRESSION TYPE GLAND COMPLETE WITH BRASS GLAND, BRASS RING & RUBBER RING FOR DUST & MOISTURE-PROOF ENTRY OF XLPE/PVC ARMOURED CABLES FOR 4 CORE UPTO 4 SQMM.

ILLUMINATION LAMP FOR CONTROL ROOM OF SUB-STATION.

SUPPLY & DELIVERY OF BI-METALIC THERMOSTAT.

SUPPLY & DELIVERY OF HEATER SWITCH.

SUPPLY & DELIVERY OF LIMIT SWITCH.

SUPPLY & FIXING 240 V, 25A, 3 PIN MODULER TYPE PLUG SOCKET (BRAND APPROVED BY EIC), WITH OUT PLUG TOP AND SWITCH, ON EXISTING GI MODULER TYPE SWITCH BOARD WITH TOP COVER PLATE & MAKING NECY. CONNECTIONS WITH PVC CU WIRE AND EARTH CONTINUTY WIRE ETC.

SUPPLY & DELIVERY OF MOTOR PROTECTION RELAY MICOM- 220 TYPE.

SUPPLY & FIXING OF FUSE UNIT COMPLETE WITH BASE AND BRIDGE ON EXISTING BOARD AND NECCY. CONNECTION FOR 60/63A, 415 V.

1.5 SQMM 'FR' STRANDED COPPER WIRE.

SUPPLY OF COPPER CONDUCTOR, PVC INSULATED ARMOURED 1100 VOLTS GRADE CONTROL CABLE OF SIZE 2.5 SQMM X 10 CORE.

COMPLETE PANEL WIRING BY SUPPLY & INSTALLATION OF 1.1 KV GRADE UNSHEATHED COPPER PVC INSULATION WIRE 7/.029 OR 2.5SQ.MM LAYING INSIDE CONTROL CIRCUIT PANEL THROUGH PVC FRONT COVER CABLE TRAY WITH ALL NECESSARY INCLUDING NUMBERING. FERULES, SOCKETING, CRIMPING JOINTS FOR MEASURING INSTRUMENT RELAY, POWER PACK FROM C.T & P.T INCLUDING SUPPLY & FIXING OF 2 NOS. PUSH BUTTON,16NOS 6-10AMPS HRC FUSE CARTRIDGE, BINDING TAPE, NUMBERING FERULES, FLEXIBLE PVC PIPE ETC. THE C.T"S SECONDARY CONNECTION SHOULD BE SHORT CIRCUITED & PROPER GROUND EARTH RECONNECTION OF H.T CABLE TERMINAL JOINT.

NECESSARY CHECKING TESTING OF P.T. CIRCUIT INCLUDING TRIPPING TEST THROUGH ALL RELAYS, PRIMARY INJECTION THROUGH CT & MEASURED SECONDARY CURRENT OF RELAYS HAS MADE AT SITE IN PRESENCE OF ELECTRICAL ENGINEER.

FITTER MECHANIC.

FITTER MECHANIC (HELPER).

STAR ENTERPRISE

R. K. RAY AND CO.