Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.7 LAccepted-AOC 12 MALIKPUR GURDASPUR ROAD SARNA PATHANKOT PUNJAB 145025 | PATHANKOT | PUNJAB | 145025 | L1 | Accepted-AOC Being Lowest L1 | |
| 2 | L2₹35.0 L+₹14,509.60 (0.42%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹37.0 L+₹2.2 L (6.18%)Rejected-Finance 1ST FLOOR GURJEET MARKET DHANGU ROAD | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹37.8 L+₹3.0 L (8.55%)Rejected-Finance FRIENDS COLONY STREET A DHANGU ROAD PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹38.4 L+₹3.6 L (10.3%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
21 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Pathankot
GE (AF) Pathankot-145001
PROVN OF IRON GRILL AT VARIOUS LOCATIONS AT AIR FORCE STATION PATHANKOT
2023_MES_576278_2
8421/GE/PAF-65/2022-23
Open Tender
Support/Maintenance Service
Item Rate
180 days
GE (AF) Pathankot
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) Pathankot
₹87,000
Yes
15 Apr 2023
9 Mar 2023
23 Mar 2023
9 Mar 2023
21 Mar 2023
14 Mar 2023
Amount
Material and labour for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290. Gde-E-165 and framed and hung as gates, rollers for sliding on sliding MS plate including pintle hinges,/Pin type hinges stops, hand-made sliding bolts, etc. complete all as specified and directed by Engineer-in-Charge. Note:- The doors will be fabricated as per the site requirement.
Taking down old u/s PVC chowkhat exc 2 sqm but not exc 4 sqm (without taking off shutter from frame) and removing to store complete all as specified and directed by Engineer-in-Charge.
Supply and fixing of collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed by Engineer-in-Charge.
Material and labour for Plates of Fe 410 W grade E-250) quality in (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed by Engineer-in-Charge.
Supply and fixing of thickness 1.25 mm Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed by Engineer-in-Charge.
Cutting holes in stone walls /brick walls built in cement mortar or cement lime mortar and stone walls built in cement mortar inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc one brick but not exc two bricks complete all as specified and directed by Engineer-in-Charge.
Material and labour Rendering 10 mm thick in cement mortar 1:4 on fair surface of stone masonary or surface other than fair face of brick work complete all as specified and directed by Engineer-in-Charge.
Material and labour for rendering 15 mm thick rendering as 5 mm thick cement mortar 1:4 over 10 mm thick cement mortar 1:6 on the surfaces of brick or concrete finishing fair and even without using extra cement complete all as specified and directed by Engineer-in-Charge.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) in cement concrete complete all as specified and directed by Engineer-in-Charge.
Material and labour renewing glazed tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed by Engineer-in-Charge.
Material and labour 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in floor finish complete all as specified and directed by Engineer-in-Charge.
Material and labour cement concrete in foundation filling and mass concrete 1:3:6 Type C-2 (40mm graded crushed stone aggregate) complete all as specified and directed by Engineer-in-Charge.
Supply, fabricate & Fixing Structural steel/square/ round tubular /box section ERW or Induction butt weld M.S. tube black conforming to IS 1161-1979 grade St 240 complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.
Preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Mild steel screw bolts 5 to 10 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm but not exc 15 cm long complete all as specified and directed by Engineer-in-Charge.
Taking down hydrolic door closer and refix it at same/ other opening after fixing the grill doors complete all as specified and directed by Engineer-in-Charge.
Preparing the newly plastered surface by rubbing, washing down with water and applying two coats of exterior emulsion paint with one coat of coloured primer in any pattern (any shades) including necessary scaffolding and other safety arrangement to work at any height at site if required complete all as specified and directed by the Engineer-in-charge
Preparation of New plastered surfaces by washing, rubbing down and applying two coat of oil emulation distemper on wall surface over alkali resistantant priming paint etc complete all as specified and directed by Engineer-in-Charge.
Material and labour Brick work with sub class 'B' brick straight or curved on plan built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.
Taking down old u/s aluminum partetion wall complete all as specified and directed by Engineer-in-Charge.
Supply and fixing of coloured Glazed ceramic tiles, of size 450X 300X 7mm thick as in skirting,dado set and jointed in neat cement slurry including pointed in white or colour cement to match the shade of tiles complete all as specified and directed by Engineer-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
Supply and fixing of vitrified light shaded tiles 9 to 10 mm thick (square / rectangular ),polished area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.
Preparation of New plastered surfaces by washing, rubbing down and stopping of distempered surfaces and applying two coat of oil distemper over a coat of primer etc complete all as specified and directed by Engineer-in-Charge.
Preparation of plastered or unplastered surfaces of walls any width or girth etc and applying two coats of exterior weather coat paint in any colour or any camoflague pattern as approved by GE over a coat of primer on new plastered surfaces as per manufacture's instruction complete all as specified and as directed by the Engr-in-Charge
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed by the Engr-in-Charge
Supply and fixing position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600x600mm with AU powder coated frame work main runner 39x 24 mm, cross tee 29x 24 mm and wall angle 22.2mmX22.2 mm using 4/9 mm thick ceiling panel of high pressure stream cured non primered classic designe variant E Board ISI marked is -14862-2000. Fiber cement E board to be placed in the grid of E grid suspended ceiling duly suspended by 4 mm dia GI bar hangers from the perlins /self tightening screws in roof with butterfly clips complete all as specified and as directed by the Engr-in-Charge
Powder coated aluminum door with shutter chowkhats/frame made with aluminum section of size 100X44x2 mm thick, vertical style and top rail of shutter with section 84X44x2mm thick and middle and bottom rail 112X44X2mm thick including 5 mm thick tinted glass pane at top and 12 mm thick both side prelaminated board at bottom pane inserted in position including all necessary fixing arrangements joining cleats,glazing clips, rubber packing,aluminium anodized beading, screw etc; floor hinges,aluminium tower bolt 200 mm 02 Nos, Mortise lock 100 mm 4 lever, 100 mm dia disc handle etc fitted to shutters/frames fixed in opening with hold fast of size 25X3 mm flat 150 mm long 6 Nos in each frame including cutting holes in brick / stone masonry and embaded in PCC 1:2:4 bed block of size 150x150x150mm each and match the existing surface complete all as specified and as directed by the Engr-in-Charge
Powder coated aluminum partetion with anchorage rod, aluminum cleats, drilling, punching etc and making good to the existing surface complete all as specified and directed by engineer in charge with following instructions:- (a) Aluminum section size 49.91X44.45X 2mm thick (b) 5 mm thick tinted glass with aluminum glazing clip and rubber beading in area n exc 1.5 Sqm
Taking down Doors chowkat or frame exc 1.5 Sqm but not exc 4 sqm but with shutters (without taking off shutters from the frames) and removing out of site complete all as specified and directed by engineer in charge.
Supply and fixing of pressed steel frames made out of MS sheet of 1.25 mm thick of size 105x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including filling of concrete 1:3:6 type C-1 back of chowkats, with two coats of synthetic enamel paint over one coat of red oxide primer including fixing of holdfast complete all as specified and directed by engineer in charge. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster, similar wall tile, floor tile etc.
Supply and fixing of factory made 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides particle board core complete all as specified and directed by engineer in charge. Note:- Screws shall be Self tapping chromeum plated.
Preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.
Supply and fixing of 150 mm aluminium handles cast type (anodised) fixed with steel chromium plated bright screws complete all as specified and directed by Engineer-in-Charge.
Supply and fixing of 300 aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.
Supply and fixing of aluminium, anodised, barrel tower bolts of extruded section of size 150 mm long complete all as specified and directed by Engineer-in-Charge.
Supply and fixed in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor including rubber bush (overall lenth of cover plate 150 mm) complete all as specified and directed by Engineer-in-Charge.
Use & waste form work to sides and soffits of floor or roof beams, lintels, lintel beams cantilevers,chajja, shelves etc; including support of fair finished surfaces complete all as specified and directed by Engineer-in-Charge.
Material and labour RCC type B-1 1:2:4 nominal mix (20 mm graded crushed stone aggregate) as in beam, roof beam, cantilevers,lintel, chajja etc; complete all as specified and directed by Engineer-in-Charge.
Mild TMT steel bars 5 mm and over upto and including 10mm dia,as in stirrup, slab, footing etc; cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E 250) Quality A or Fe-290 (Gde E-165) complete all as specified and directed by Engr-in-charge.
Surya & Gautam Builders
Vijay Kumar Contractor and Engineers
M/S SINGH AND ASSOCIATES
PARVINDER BHARDWAJ
KUMAR TRADING CO
A R ENTERPRISES
ADVAIT CONSTRUCTION CO
OMKAR SHARMA AND CO
M/S P.S CONSTRUCTION CO
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .