REPAIR TO HARD STANDING FENCING GATES DRAINS PATHS AND OTHER MISCELLANIOUS WORKS AT INS HANSA UNDER AGE BR I OF GE NW VASCO

Amount

Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided for.

Dismantling of stone slabs and tiles of any description or thickness in floors / dado etc laid bedded and pointed in any mortar

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment all as specified.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade with grey cement and pigment all as specified.

M&L for 100 mm thick cement concrete type C2, 1:3:6 using 40 mm graded stone aggregate in sub base of flooring/ hard standing all as specified.

Sand filling under floors or in any position including watering and consolidation for laying interlocking paver block all as specified.

M&L for providing, cement concrete type B1, 1:2:4 using 20 mm graded stone aggregate in coping, roof kerbs or mud stops, rounded or chamfered on edges all as specified.

M&L for 75 mm thick cement concrete type C2, 1:3:6 using 40 mm graded stone aggregate in plinth protections, finished even and smooth without using extra cement all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises

M&L for 75 mm thick cement concrete type C2, 1:3:6 using 40 mm graded stone aggregate in sub base of flooring/ hard standing all as specified.

M&L coloured heavy duty paving, chequered finish, cement concrete endura industrial tiles 12 to 15 mm thick (square / rectangular) textured series area of each tile exceeding 0.07 sqm not exceeding 0.18 sqm as in floors, treads and risers of steps fixed with grey cement and pigment laid over complete all as per manufacturer instructions and of design as directed by Engineer-in-Charge. Make Johnson endura industrial or equivalent of Kajaria/Regency

M&L screed bed or bedding layer of morter 15 mm thick cement plaster 1:4 for laying floor finished to receive floor tiles.

S&F stone kerb of machine pressed coloured glossy finish precast cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate, finished at top bullnosed shape and finished surface even and smooth using two coats of epoxy paint and jointed in CM (1:6) struck finished as directed laid with depth of block vertically.

Demolition of stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles.

Pre - cast cement concrete masonry with Grade C-5.0, (20mm graded stone aggregate) with solid blocks wall built in cement mortar 1:6

M & L 100mm thick PCC (1:3:6) type C1 as in floor of drain bed etc finished even and smooth using extra cement

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for.

Materials and labour for reinforced cement 1:1.5:3 Nominal Mix using 20mm graded aggregate in slabs supported in walls, beams and columns in roofs complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs landings and similar works not exc 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete flat complete all as specified and directed.

Use and waste of formwork to edges of slab exc 10cm but n exc 20cm thick

M&L for mild steel TMT bars 10mm dia and over, cut to length bend to shape required including cranking bending spirally for hopping for columns hooking ends and binding with and clips complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8 mm dia and over cut to length, bent to shape required including cranking, bending sprially for hoping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 finished even and smooth with out using exrtra cement as on walls complete.

M&L for preparation of new plastered surfaces of walls including cornices, pilasters etc and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of old painted bituminous/concrete, flexible or rigid surface and painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide and applying one coat of road marking paint water based (white or golden yellow) with necessary painting rollers, complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness (Below or above ground level)

Dismantling of wrought iron or mild steel work of any description, not otherwise specifically provided for complete all as directed.

M&L 15mm thick rendering in CM 1:4 on of brick or concrete surface finished even and fair on walls etc.

M&L PCC (1:2:4) type B-1 (20mm graded aggtt) as in kerbs/coping and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete

M & L preparing plastered/ unplastered new surfaces of walls and applying two coats of cement base paint over a coat of white cement primer complete all as specified and directed.

Dismantling of fencing wire mesh any type

Dismantling posts or struts (Wood, steel or RCC) any section including taking out enbeded portion and making good disturbed ground in natural ground

Excavating in post holes or single holes each n. exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc. 25 cm watering and removing surplus soil to a distance n. exc 50 m and making good surface of hard/ dense soil.

M&L rolled miled steel in post and struts in fencing including tops to shape as directed drilling holes notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc and similar work conforming to Fe 290 Gde E 165

M & L cement concrete type C2 1:3:6 (40 mm graded stone Aggregate) as in embedding of precast post.

Supply only chain link fencing MS galvanized of wt not exceeding 4.00 Kg/Sqm.

Fixing only chain link fencing incl line wires of size as directed to any type of standards, rails, straining bolts (weight of chain link fencing should be of not exceeding 4.00 Kg/Sqm)

S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed each line wire to be measured)

M&L mild steel bolt machine made with hexagonal or square beads at one end and screwed the other or screwed both ends each screwed and to be fitted with wahsers and one hexagone or square but length of bolt exc 5 cms but not exceeding 10cm long dia shall be of 5 to 10mm dia

Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete

M&L Mild steel round bars 10 mm dia and over, cut to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (Annealed) not less than 0.9 mm dia all as specified confirming to Gde E 250 or Gde E 165

M&L for preparation of new steel surface and applying one coat of red oxide zinc chrome primer and two coats of Epoxy anticorrosive paint over 10 cm width or girth.

M/s VEEJEE ENTERPRISES

K M Subhanaiah

M/S jvsr constructions