REPAIR OF SUNKEN FLOOR, PIPE LINE, PLINTH PROTECTION, WALL PLASTERING, SAINTAIRY FITTING, ROLLING SHUTTERS, PERODICAL AND OTHER MISC B/R WORK AT LEKHANAGAR COLONEY, D AND E ZONE UNDER AGE B/R-II OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A' PART-I (B/R WORKS)

Demolition of brick work or stone masonry built in cement mortar including all quoines arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles all as specified.

M&L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Ditto all All as per item No 2.00 here-in-before but except bricks.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified.

M&L for 15mm thick rendering on fair faces of brick surfaces in cement mortar 1:6 and finished surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:3 as in ceiling, finished surfaces even and smooth without using extra cement complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in roofs, floors above ground floors not exc 15cm thickness complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of premises completed all as specified and as directed.

S&F 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, Cooking Platfarms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for vertified ceramic tiles (light shade) 9 to 10 mm thick (Square/ Rectangular) polished, area of tiles n.exc 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured in white or coloured cement to match complete all as specified and directed.

M&L for Vertified ceramic tiles (light shade) 9 to 10 mm thick (Square/ Rectangular) polished of size 600X150mm in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured in white or coloured cement to match complete all as specified and directed.

M&L for Non skid ceramic coloured joint free tiles 7 to 8 mm mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for joint free (300mm x 450mm) x 7-8 mm thick coloured glazed ceramic tiles as in dado/vertical services set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

M&L for laying screed bed 15 mm thick for laying floor finishes with cement mortar 1:6 complete all as specified and directed.

M&L rendering 10 mm thick for laying tiles in vertical surfaces as in skirting/dado in CM (1:4) for backing coat complete all as specified and directed.

Demolition of cement concrete unreinforced of any description and in any position not otherwise complete all as specified.

M&L for cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in levelling course and finished even and fair without using extra cement complete all as specified.

M&L for applying bituminous primer on roof surfaces @ 0.40 ltr/sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 kg/sqm and provide modified polymeric five layered APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polythylene film. Min wt of memebrane will be 3.5 kg/sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm including dismantling of existing treatment complete all as specified.

M&L for providing cement concrete 1:2:4, type B-1(using 20mm graded crushed stone aggregate) and mixing of liquid water proofing compound PIDI proof or equivalent @ 200 ml per bag of cement , as in copings, corefillets etc Complete all as specified. (Note:- water proofing compound shall be measured and paid seperately.

Supply only liquid water proofing compound.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories).

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Ditto all as per item No 24.00 here-in-before but except pipes.

S&F in repiars 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair Stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110 mm bore complete all as specified.

Taking down chowkhats or frame exceeding 1.5 Sq. m but not exceeding 4 Sq. m each with shutter(s) (without taking off shutters from the frame), including removing to store complete all as specified.

Taking down chowkhats without taking off shutters from the frames (with shutters) area n.ex 1.5 sqm each complete all as specified and directed.

S&F factory made pressed steel frames having profile 105 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified.

S&F Factory made pressed steel frames having profile 125 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified.

Taking down and removing Shutter of any description exc 1 sqm but n.exc 2 sqm each

M&L for 35 mm thick flush shutters, solid core construction, with block board core and ply wood face pannels and one face is covered with decorative face veneer with lipping/frame to match all as specified.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap insert for topo rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube in opening as per specification and drawings complete all as specified and directed.

S&F plain, solid, 2nd class hard wood straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with pinned at joint etc complete all as specified and directed.

S&F Factory made 2nd class H/W Glazed/gauzed skelton shutter 35 mm thick open rebeated and prepared to recive gauze etc as specified in SSR -I section 8 clause 8.24 A complete all as specified and directed.

S&F mortice lock, mild steel body, 4 lever, 100 mm size, vertical type with two keys, complete all as specified.

S&F butt hings medium weight 100 mm cold rolled mild steel complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section 200mm complete all as specified and directed.

S&F Aluminium alloy anodised sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or 300mm complete all as specified and directed.

S&F in repairs 100 mm aluminium handles, cast type, anodised complete all as specified and directed.

S&F in repairs 100 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs mild steel cold rolled butt hinges medium weight 100 mm long fixed to pressed steel/angle iron frames by weldingcomplete all as specified and directed.

S&F Aluminium handles cast type anodised of size 150 mm complete all as specified and directed.

S&F Floor door stoper of 140mm long of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floors complete all as specified and directed.

M&L for reparation new wooden surfaces and applying two coat of synthetic enamel paint over one coat of pink primer surface of any description not other wise described over 10 cm width or girth all as specified and directed.

S&F 150 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, devetailed or welded complete all as specified and directed.

Ditto all as per item No 49.00 here-in-before but without glazing bars (for mosquito proof shutter)

S&F steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed.

M&L in repairs sliding window in standard aluminium powder coated section including frame/chowkhat with glazing bar, window shutter style shall be 100mmX40mm,1.5mm thick, sliding channel 3mm thick of width as required in three track section with top,bottom and side rail of each track consisting of single shutter of two (Two glazed shutter of half width of window each and one gauged shutter half width of window) provided with and including 4 mm thick sheet glass and stainless steel wire gauge o.36mm dia and 1.1mm aperature with and including rubber beading , aluminium clip,locking arrangement ,wall catch etc with and including aluminium grill(ornamental type) made out of 5 to 6 mm dia solid aluminium bar complete all as specified and directed. Note : All fitting shall be of ISI marked except cleats,size of each shutter shall be as per site requirement all as directed and specified.

S&F Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe.290. Gde-E-165 all as specified.

Making good steel windows 'z' section aluminium window/door by taking down and re-fixing including cutting/welding if required and made good to smooth functioning including replace of minor fittings (Hinges,Handle) of the window/door complete all as specified and directed.

Dismantling boarding of any description fixed in any position with nails.

M&L for powder coated anodised aluminium snap grid frame work for false celing including offits\trusses\bracking supporting hanger compressing of GI wire etc complete all as sepcified and directed

S&F 4 mm thick non asbestos fibre cement designer building boards fixed or laid/inserted to timber/GI/aluminium framework wih screws complete all as specified.

Ditto all as per item No 57.00 here-in-before but except ceiling board and except frame workincluding cleaning of all debries over the celing (using old material obtained from dismantling complete all as specified and as directed

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings all as directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated (trapezoidal profile) steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F 6 mm thick Asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L type or J type or cranked hook bolts etc complete all as specified and as directed.

Fixiing only 6 mm thick Asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L type or J type or cranked hook bolts etc complete all as specified and as directed.

S&F Asbestos cement two pieces adjustable serrated ridge for corrugated or semi corrugated sheets ridges 6 mm thick fixed with L type or J type or cranked bolt type etc complete all as specified and as directed.

Dismantling water tanks and removing to store exc 500 ltrs and nexc 1000.00 ltrs all as directed.

Disconnecting existing water tanks, setting aside (or lowering if required)for repairs, cleaning etc and hoisting if required reconnecting and refixing in postion etc exc 250 ltrs and nexc 500.00 ltrs all as specifed

S&F Rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 litres including all accessories, all as specified.

S&F 18/19mm thick plywood grade A (Termite treated / water proof) ,type BB fixed with screws to timber /iron frame work. (Make:Green Ply/Kit ply ) complete all as specified.

M&L for 0.9 mm thick decorative choice of lamination type -1 of surface finish, colour and pattern as approved adhesive as per manufacturers instructions complete all as specified.

S&F continous (piano) hinges width of flaps (when open) 30mm ,mild steel bright finish or electrogalvanised complete all as specified.

S&F stain less steel catcher of superior qualityall as specified and directed.

S&F 50mm stain less steel pivoted type hinges of superior quality and directed.

S&F 75mm long aluminium alloy handles, fabricated type, anodised (ISI Marked ) all as approved by Engg-in-charge.

S&F aluminium 65mm mortice lock four levers (ISI Marked) complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section with75mm long bolt (ISI Marked) complete all as specified.

Dismantling mild steel work of any description not otherwise provided for.

Dismentling of timber scantlings 40 sq. cm and over in any section in any postion.

S&F roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Gde-E-250) quality-B complete all as specified and directed.

S&F Mild steel work as in wind ties conforming to Fe.290. Gde-E-165 complete all as specified and directed.

M&L to two coat of synthetic enamel paint over a priming coat of red oxide including preparation of new steel surface of any description over 10 cm in width or girth not otherwise described complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty,pins in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F glazing complete with sheet glass ordinary quality 4 mm thick fixed with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden, metel frames including punching or drilling out glazing pins/spring clips complete all as specified and directed.

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs 15mm brass chromium plated central hole basin mixer with reguler spout without popup waste system complete all as specified and directed.

S&F 900 mm long door seal with aluminium(powder coated) body and brush fixed with wooden screw at bottom of door complete all as specified and directed.

S&F in repairs stainless steel soap dish fixed to wall.

S&F in repairs stainless steel toilet paper holder fixed to wall.

S&F in repairs towel rail chromium plated of size 60 cms long.

S&F in repairs cast iron nahani trap with SS grating to 75mm bore including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 all as specified.

Taking up or down steel tubing and connections, 15mm bore including cleaning for serviceable pipe for re-fixing or removal of unserviceable pipe from site of work complete all as directed.

Ditto all as per item No 93.00 here-in-before but 20mm bore.

Ditto all as per item No 93.00 here-in-before but 25mm bore.

Re- fixing 15mm bore GI tubing, medium grade with provn of new fittings as required and fixing accessories in new or old position (walls,ceiling floor etc) including testing complete all as directed.

Ditto all as per item No 96.00 here-in-before but 20mm bore.

Ditto all as per item No 96.00 here-in-before but 25mm bore.

S&F medium grade galvanized steel tubing (concealed) with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed

Ditto all as per item No 99.00 here-in-before but 20 mm dia bore pipes

Ditto all as per item No 99.00 here-in-before but 25 mm dia bore pipes

S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and as directed.

S&F in repair bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed.

S&F in repair stop valves /angle valves fancy type chromium plated brass cast copper (Concealed type) alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and directed.

S&F as in repair 15mm bore Pillar taps fancy type, cast copper alloy, with long swan neck, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed.

Dismantling cast iron or reinforced concrete drain pipes,any size, jointed in cement motar and taking out of trenches if reqd.

S&F Cast iron soil, sand cast waste and vent pipes, 75mm dia in any length with or without ears with cement joints, laid in trenches or in floors in repair.

S&F Cast iron soil, sand cast waste and vent pipes, 100mm dia in any length with or without ears with cement joints, laid in trenches or in floors in repair.

S&F in repairs 75mm bore bends(any radius) with duck foot or heel rest all as specified.

S&F in repairs 100mm bore bends/reducer (any radius) diminishing pieces or tapers (larger bore measured) all as specified.

S&F in repair 0.5mm thick stainless steel plate rack of size 750mm x 750mm x 250mm of standard quality and shapes complete all as specified.

S&F in repair stainless steel sink, 1.00mm thick for kitchen with plug, waste pipe, washer including cantilever cast iron brackets connecting union edtc, overall size 495mm x 420mm with bowl size 410 mm x 330mm x 160mm.

S&F in repair water closet (Squat pattern) including lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe) complete all as specified and as directed.

S&F in repair PVC valve less syphonic action type flushing cistern 10 Ltr capacity low lavel coloured with inlet ball valve float and handle ,brackets and including polyethylene flush pipe complete all as specified and as directed.

S&F in repairs of vitreous china wash hand basin size 550 x 400 mm, white, flat back including bracket and pedetal pattern matching of colour, of any approved including PVC Waste pipe 32mm dia; and CP waste couplings,fixed in repair complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device and also including cast iron S trap, bore of pipe 100 mm. and provision of concrete bedding complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repair drapery rod (Wooden Shade) , mild steel, chromium plated with fixing with wooden brackets, stops, rollers etc complete all as specified.

Demolition of RCC ,Slabs, Platforms , floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work

M&L for reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use & Waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), rough finished surface of concrete complete all as specified and directed.

M&L for providing pre cast cement concrete 1:2:4, type B-0 using 12.5 mm graded crushed stone aggregates set in cm 1:4 as in manholes cover, shelves etc as directed including necessary formwork as directed.

M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of wall and apply two coat of oil bound distemper over a coat of primer including two coats of wall care putty all as specified and directed

M&L for complete removal of existing treatment of wall including preparation of surfaces and applying two coats of oil bound distemper including including two coats of wall care putty complete all as specified.

M&L for preparing plastered or unplastered old surfaces of wall by brooming down or brushing, treating oil and greasy spots etc, and applying two coat of white washing, complete all as specified.

M&L for preparing plastered or unplastered old surfaces of ceiling by brooming down or brushing, treating oil and greasy spots etc, and applying two coat of white washing, complete all as specified.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coat of white washing, complete all as specified.

M&L for preparation of old painted wooden surfaces over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified.

M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint all as specified.

M&L for preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying one coats of synthetic enamel paint complete all as specified.

M&L for preparing new plastered surfaces of wall and applying two coats of cement base paint over one coat of cement primer all as specified.

Complete removal of existing surface of old surface of walls, chajja, facias etc by brooming down or steel wire brushing, scrapping down smoke soots, moulds, moss, efflorescent salts, treading oil, greasy spots or washing rubbing down and applying two coat of cement base paint, white or tinted over a coat of alkali resistant primer complete all as specified

Rounding of / moulding to edge (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified.

Grubbing up trees/plaants girth upto 15 to 30 cm and making good surfaces by putting PCC 1:2:4 or brick work upto .05 cum complete all as specified and directed

Cutting holes into or through RCC/brick walls built in cement mortar not exc one brick thick for inserting pipe/ hold fast etc. and making good in cement mortar 1:3 or cement concrete 1:2:4, Type B-1 as required complete all as specified (superficial area n.exc 150 sq cm)

M&L for PCC 1:2:4 type B-1 using 12.5mm graded crushed stone aggregates as in fillet, levelling course in sunken portion, slope shall be 1.20 towards at corner of outer wall and finished even and fair without using extra cement complete all as specified.

M&L for Lime concrete with brick bat aggregate in lime mortar 1:3 as in sunken portion complete all as specified.

Grating square with slit, (suitable for 100 mm bore pipe) of SS (Minimum weight 90 gm) of shade matching to tiles/floor, fixed with white cement including matching shade pigment, IN REPAIR, complete all as specified.

S&F in repair 18/19 mm thick PVC board one side laminated cut to size as required and fixed in position for cabinets etc complete as directed.

S & F Health faucet with wall hook and one mtr chrome plated PVC hose pipe fixed in repair complete all as specified and as directed.

M&L for providing and injecting chemical emulsion for post constructional anti-termite treatment along the external wall below concrete or masonry apron using chiemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified.

M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2(1 cement, 2 coarse sand) to match the existing floor complete all as specified and directed.

M&L for anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45degree at 150mm centre to centre and sealing the same complete all as specified and directed.

S&F in repairs plastic water closet seat cover ,white,closed pattern with flats bottom and cover and mild steel chromium plated or aluminium hinging device,of approved make and quality etc complete.

Dismantling fencing wire mesh any type in any position.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete or brick work all as specified and directed.

Excavation in post holes or similar holes each nexc 0.5 cum getting out in any type of soil

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for PCC type 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in foundation filling & mass concrete complete all as specified and directed.

S&F for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified and directed.

Ditto all as per item No 153.00 here-in-before but fixng only.

M&L for Providing reinforced cement concrete 1:2:4 type B-l (using 20 mm graded crushed stone aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed

M L for providing precast concrete louvers and jallies 40mm thick of 1 :2:4 type B0 set in cement mortar 1:6 CM (measured solid) including all mouldinngs includng dismentling of old existing all as specified.

S&F 4mm dia galvanised mild sreel wire chainn link fencing with size of mesh 100mmx100mm as directed to fix at site all as directed.

M&L for mild steel bolts purpose made with hexagonal or square head one end each screwed other end to be fitted with washers and one hexagonal or square nut. Dia exc 5 to 10 mm dia and nexc 5 cm long complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.

M&L 75 mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of flooring complete all as specified and directed.

M&L for 20 mm thick screed bed are bedding layer of cement mortar (1:4) for laying floor finishes complete all as per specified.

M&L for Glossy finished, chequered coloured cement concrete tiles 30cmx30cmx(22-25)mm thick, machine pressed, factory made, set jointed and pointed in neat cement slurry, laid in floor with gray cement and pigment complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B0 in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles complete all as specified and directed.

Surface Excavation not exceeding 30 cm deep and averaging 15cm deep and getting out any type of soil complete all as specified and as directed.

M&L for hard core of brokenstone or of gauge exc 63 mm but n,exc 100 mm deposit, spread and levelled in layers n.exc 15 cm thick, water and rolled /rammed to true surface complete all as specified and directed.

M&L 100mm thick cement concrete (1:2:4) type B-2 40mm graded curshed stone agg as in flooring laid in alternate bays finished cement concrete surface fair & even and smooth w/o using extra cement complete all as specified.

M&L for 80 mm thick machine pressed precasted conc interlocking tiles/paver blocks with designer of self impression and topping of imported coloured desired pigment any shape size conforming to IS 15658-2006 of M-40 grade lwith grey cement or mixed with pigment all as directed.

M&L coloured machine pressed precast concrete interlocking tiles/paver block any shape and size set conforming to IS 15658-2006 of 60mm thickness, M-35 Grade & jointed with grey cement and pigment complete complete all as specified and directed.

M & L for sand filling under floors including spreading, levelling and well ramming watering and consolidation.

M&L for forming Contruction (Dummy) Joints 65mm deep x 10mm wide filling with ceiling compound grade 'A' all asspecified and as directed.

M&Lfor Fly ash brick work with old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for preparing old plastered surfaces of wall and applying one coats of cement base paint all as specified.

S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing all as specified and directed as in repairs

Fixing only galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for (unreinforced ) all as specified. .

M&L for providing cement concrete1:2:4 type B1 (using 20mm grade crushed stone aggregate) in lintels upto 1.50m clear span cells, steps, selsmic and other similar bands, plinth courses, string courses, lacing courses, parapets and ralling upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided,water through and the like including weathering, slightly rounded or chamfered angle and throating as directed

M&L for applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified and directed.

S&F preparation of old steel surface of any description, over 10cm width or girth, and applying one coat of sunthetic enamel paint complete all as specified and directed.

Extra only over Item above for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc

M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Taking down steel gates/shutters and refixing the same after greasing, welding etc if required and make it functional complete all as specifed and directed.

M&L for 25 mm thick flush shutters,solid core construction,with block board core and ply wood face pannels and one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

M&L for 19/20mm thick Pre laminated exterior grade both sides laminated with decorative choice laminations fixed with screw to timber frame as in cupboard shutter, shelve, kitchen cabinet etc complete all as specified and as directed.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 45215.00 (refer Tender Srl Page No 42). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

M/S B S CONSTRUCTION

SHRI S K BHATTACHARJEE

BISWAJIT SAHA

M/S KAR CONSTRUCTION

UNIVERSAL CONSTRUCTION

PRADIP KUMAR BOSE

M/S CONTRACTS