Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.5 LAccepted-AOC | L1 | Accepted-AOC Found lowest and reasonable and accepted | |
| 2 | L2₹15.0 L+₹1.0 L (7.19%)Rejected-Finance | L2 | Rejected-Finance In order but L2 | |
| 3 | L3₹17.8 L+₹3.8 L (27.5%)Rejected-Finance 4029 KALI MAI ROAD NASIRABAD AJMER RAJASTHAN 305601 | AJMER | RAJASTHAN | 305601 | L3 | Rejected-Finance In order But L3 |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
10 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(U) E/M Meerut
Roorkee road Meerut Cantt
REPAIR AND RECTIFICATION OF DAY TO DAY / ARMAAN COMPLAINTS AND PERIODICAL JOINERY, PLASTERING ETC MAINTENANCE OF LEKHANAGAR UNDER GE (U) MEERUT CANTT.
2023_MES_601381_1
8522/E8
Open Tender
Civil Works
Item Rate
180 days
Meerut
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
GE(U) E/M Meerut
₹50,000
Yes
1 Aug 2023
6 Jun 2023
12 Jul 2023
6 Jun 2023
10 Jul 2023
20 Jun 2023
Amount
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical after fixing new chowkhats / frame to existing finish without any extra cost to Govt.), complete all as specified and directed
Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismentaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical after fixing new chowkhats / frame to existing finish without any extra cost) complete all as specified and directed
Taking down shutters of any description exceeding 1 square metre each and n. exc 2 Sqm complete all as specified and directed
Taking down and refixing shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm each in same opening, complete all as specified and directed
Taking down chowkats or frames exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical after fixing new chowkhats / frame to existing finish without any extra cost to Govt.), complete all as specified and directed
S&F factory made, 2nd class hard wood (sal/hollock), plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete including fixing only aluminium mongery such as tower bolt (one Nos each Shutter 150 mm long) ,handle,( 150 mm long 2Nos on eah doors ) hinges ( 100 mm long heavy duty MS ),aldrop bolt ( 01 Nos on each doors 300 mm long with hasp and staple complete all as specified and directed
S&F 2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge,etc. (without sash bars), edges of framing palin, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I Section 8.24(a) supplied and fitted to chowkhats complete including fixing only iron mongery such as wer bolt (one Nos each Shutter 150 mm long) ,handle,( 150 mm long 2Nos on eah doors ) hinges ( 100 mm long heavy duty MS ),aldrop bolt ( 01 Nos on each doors 300 mm long with hasp and staple complete aluminium) etc complete all as specified and directed
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing on page No. 150 MES SSR-2004 Part II and complete all as specified and directed
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tube for top & bottom rails. M.S. frame shall be covered with heat mouleded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixed in the frame at site as per specification clause No.8B.1 to 8B.10 and drawing on page No. 146 of MES SSR-2004 Part-II complete including fixing only iron mongery such as wer bolt (one Nos each Shutter 150 mm long) ,handle,( 150 mm long 2Nos on eah doors ) hinges ( 100 mm long heavy duty MS ),aldrop bolt ( 01 Nos on each doors 300 mm long with hasp and staple complete aluminium) etc all as specified.
S&F in repair mild steel cold rolled butt hinges medium weight 100 mm long, including fixing and welding to pressed steel/wooden door frame if required complete all as specified and directed
S&F100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed
M&L for rolled mild steel work of angle iron as in frames of doors & Cup Board etc conforming to grade Fe 410-O or Fe-310-O complete all as specified and directed
S&F of stainless steel wire cloth cut to size, 0.36 mm nominal dia wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed
S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel staple complete all as specified and directed by Engr-in-Charge.
S&F in repair MS helical door spring 150mm size incl roller and roller plate fixed to wooden or steel frames incl necessary welding etc complete all as specified and directed
S&F in repair 18/19 mm thick prelaminated particle boards bothsides with decorative choice laminations, grade-2 quality, interior grade, commercial type, fixed with screws as in shelves and shutters of cup board exposed face fixed with 20x6mm thick teak wood beading complete all as specified and directed
S & F mild steel continuous piano hinges, bright finish or electro galvanised, width of flap when open 30mm, complete all as specified and directed
S&F 100 mm long aluminium anodised hasp and staple complete all as specified and directed
S&F in repair 100 mm long aluminium anodised hasp and staple complete all as specified and directed
S&F in repairs Chromium plate tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed
S&F of 200 mm long aluminium anodised barrel tower bolts, extruded section complete all as specified and directed
S&F of 200 mm long aluminium anodised barrel tower bolts, extruded section complete all as specified and directed
S&F of mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed
S&F in repair mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed
S&F of 150 mm long mild steel pressed steel handle, oval type, stove enameled black complete all as specified and directed
S&F in repair 150 mm long mild steel pressed steel handle, oval type, stove enameled black complete all as specified and directed
M&L for hacking out old broken glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and directed
S&F of 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane fixing in glass any height/ any stories without any financial effect complete all as specified and directed
S&F of 3mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and directed
S&F in repair for 2nd class hard wood small fittings such as shaped door & window stops, cleat including all necessary labours, articles not exceeding 200 cubic centimeter each complete all as specified and directed
Repair of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, plug etc. to make it functional complete all as specified and directed by Engineer-In-Charge. Note :- 1 :- Cost of material like screwes , nails glass panes hings etc are included in the Quaoted rate 2 :- Complaint shall be complete with in 24 hours if not attend then @ Rs 10 per hrs shall be recovered by the contractor
Repair /rectification of water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails and white cement to make water supply/ plumbing lines functional and leak proof complete all as specified and directed by Engr-In-Charge. Note :- 1 :- Cost of material like washer, nipple , tee, socket, spandle, float assemble of shifting cistern, m-seal etc. 2 :- Complaint shall be complete with in 24 hours if not attend then @ Rs 10 per hrs shall be recovered by the contractor
S&F in repair vitreous China wash basin, white, flat back, size 550x400mm excluding tap, chain, plug but including for fixing of taps,waste fitting, brackets and cutting for and pinning in ends of brackets complete all as specified and directed
S & F 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15mm dia 450mm long PVC connection with CP brass coupling nuts and PVC washer at both ends (fixed in repair), complete all as specified and directed by Engr-in-charge.
S&F in repair stainless steel grade 304 conduit pipe 25mm bore (Drapery rod) with a pair of stainless steel clamps to hold drapary rod and decorative attachment at both ends of drapary rod, fixed to opening of door/windows, with a pair of clamps and a pair of side ornamental attachments), complete all as specified and directed by Engr-in-Charge.
S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar including fixing cantilever brackets connecting union to pipe and 32mm dia GI pipe duly painted upto Nihani Trap or Floor trap complete as directed at site, overall size 915mmx460mm bowl size 410mm x 330mm x160mm. complete all as specified and directed
S & F, Sink made of stainless steel 1 mm thick kitchen , washers and wastes coupling , inlcuding bedding in cement mortar to dwarf wall or including fixing cantilever brackets, PVC waste pipe and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm , complete all as specified and directed by Engr-in-charge.
S&F in repair pillar taps , cast copper alloy, with capstan heads , chromium plated , screwed down high pressure with or without lettered 'Hot' and 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm complete all as specified and directed
S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed
S&Fin repair waste fittings brass chromium plated for glazed ware sink, basins,etc with long screwed shank and fly nuts,flenges end bedded in red lead cement and other end fixed 32mm dia complete all as specified and directed
S&F in repir stainless steel grating doom 100/150mm dia with or without hole complate all specified and directed.
S&F in repair 32/40 mm dia and 750mm long PVC waste pipe for WHB/sink complete all as specified and directed
Taking up or down steel tubing with connections for cleaning for refixing or removing to storeyard complete of bore 15mm complete all as specified and directed
M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm complete all as specified and directed
Fixing only Steel water tubing 15mm dia medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors complete all as specified and directed
S&F in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed
S&F in repair bib Tap of PTMT any colour 15mm dia (Prayag or equivalent ) complete all as specified and directed
Disconnecting existing tanks, setting aside (or lowering if required)for repairs , cleaning ete. And hoisting if requeired reconnecting and refixing in position of capacity execeeding 250 ltrs and not exceeding 500 litres and removing to stores, all as specified.Note :- date of cleaning of water tank should be mentioned on the tank with synthetic enamel paint complete all as specified and directed
S&F in repairs Rotational moulded polyethylene water storage tank 500 Ltrs capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete all as specified in SSR Part-I, making connections incl 20mm bore ball valve brass with polyethylene float and fly nut and tank nipples incl dismantling existing water tank of any capacity and removing from site, complete all as specified and directed
Supply and fixing in repair ball valves of size 20mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed
Supply and fixing in repair ball valves of size 15 mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed
Supply and fixing in repair angle valves cast copper alloy 15 mm, chromimum plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed by Engr-in-Charge.
S&F in repair 15mm dia stop cock fancy type chromium plated complete all as specified and directed
S&F as in repair bib tap 15mm bore fancy type chromium plated complete all as specified and directed
S&F of bib cock 15mm bore fancy type long body chromium plated complete all as specified and directed
S&F as in repair swivel shower of size 100mm brass chromium plated with CP arms for fixing to 15 mm pipe complete all as specified and directed
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed
M&L for 15 mm thick rendering on fair faces of brick or stone/concrete surfaces in cement mortar 1:4 and finished surface even and smooth without using extra cement complete with water proofing compound complete all as specified and directed . Note : WPC shall be measured separtely
M&L for 15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed
M&L for 10 mm thick rendering on fair faces of brick /concrete surfaces as in ceiling in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and directed
Supply only integral water proofing compound as per latest IS specification complete all as specified and directed
Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) as in beams, staircase, landing, chajjas and similar suspended work complete all as specified and directed
M&L for reinforced cement concrete 1:2:4 type B-0 (nominal mix) using 12.5 mm graded crushed stone aggregate as slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed
M&L for use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, rough finished surface of concrete complete all as specified and directed
TMT bars 6 mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed
M&L Roughening surfaces of old concrete surfaces by picking sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 Kg/Sqm including 20mm thick screeding in CM (1:3) finished even and smooth mixed with water proofing compound complete all as specified and directed ( Note :WPC shall be measured and paid separately)
M&L Applying bituminous primer on roof surfaces @ 0.40 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and laying 3mm thick polymeric waterproofing membrane of 3.5 Kg/Sqm and bonded completely to the surfaces with overlap of 10 cms( with torch application) and overlaps are to be sealed by flame torch and applying one coat of IWL Aluminium paint complete all as specified and directed
Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed
M & L for 50mm thick cement concrete type C-2, 1:3:6 (using 40mm graded aggregate) as in plinth protection finished fair & even without using extra cement,complete all as specified and directed by Engr-in-charge.
Dismantling floor, hearth or wall tiling including CM bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge.
Glazed ceramic coloured tiles 300mm x 200mm x 7/450X250x7 mm thick as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed by Engr-in-charge.
M&L for Non skid coloured 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engr-in-Charge.complete all as specified and directed by Engr-in-Charge.
20mm thick Granite (of any type) work (table rubbed and polished and moulding of outer edges) in steps, jambs and pillars, window cills, cooking platforms and the like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with and including 15mm thick screed bed in CM 1:6, complete all as specified . including dismantliing of old stone slabs on flooring complete all as specified and directed
Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and directed
M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed
All as per Item No 76.00 above but except bricks complete all as specified and directed
M&L for applying two coat of synthetic enamel paint on new wooden surfaces including preparation of newly wooden surfaces over a coat of pink primer, complete all as specified and directed
M&L for applying two coat of oil bond distemper on walls after preparation of newly plastered surfaces over a coat of white primer,and imm thick wall care putty complete all as specified.
M&L for applying three coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified and directed
M&L for new plastered surfaces applying Two or more coats of 100% Premium external weatherproof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over 1mm thick wall care putty. complete all as specified and directed.Make:-Apex Ultima protect/Berger paints(weather coat smooth)).
M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed
M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed
M&L for providing cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed
M&L for applying two coat of painting on new steel surfaces including preparation of newly steel surfaces over a coat of red oxide primer, complete all as specified and directed
S&F in repair 1mm thik plate rack made of stainless steel, 600 x 750X250mm(Wt not less than 7.5 Kg) including brackets and embedded in brick wall all as specified and as per manufacturers instruction.
S&F in repair PVC tank cover suitable for tanks 500 & 1000 Ltrs tank incl securing with MS binding wires, complete all as specified and directed by Engr-in-Charge.
S & F box type steel window double leaf double shutter (gauge shutter will open inside and glaze shutter will open outside) with side hung shutter including box type hinges with peg stay 300mm long and 100 mm long handles of Z Section welded to frames & 150 mm long tower bolt welded to shutter one each at top and bottom to each shutter complete with glazing bar for one shutter and gauze bars of FI 10x 3mm thick dovetailed or welded including 12 mm sqm guard bars 150 mm centre to centre complete all as specified and directed (Note:-Glass and wire gauze shall be measured and paid seperately)..
M&L for old plastered surfaces applying Two or more coats of 100% Premium external weatherproof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over 1mm thick wall care putty. complete all as specified and directed.Make:-Apex Ultima protect/Berger paints(weather coat smooth)).
Rewriting or repainting of existing writing letters (Block or Indian) with synthetic enamel paint white with 150 mm hieght of letters over 30 mm dia of circle black syntheic eanemal paint complete all as specified and directed by Engr-in-Charge.
M&L uprooting of plants (girth n.exc 15 cm of trunk to any type of plants 100 ml grown along the pipes or walls chajjas, parapets and roof of building (incl multistoried) and making good the surface as per existing surface and pouring acid not less than 100 ml for each plant in the roof to avoid further growth complete all as specified and directed by Engr-in-Charge.
Preparation of old plastered/unplastered wall surfaces and applying one coat of oil bound distemper over 1 mm thick wall care putty (including wahsing, rubbing down and stopping of distempered and painted surfaces), complete all as specified and directed
Preparation of new plastered/unplastered wall surface and applying two coats of oil bound distemper over a coat of white primer and 1 mm thick wall Putty incl Complete removal of existing treatment complete complete all as specified and directed
M&L for prepration of old new surfaces including cornices, pilasters etc(Plastered or unplasterd surfaces) and applying one coats of white (Lime) wash on ceiling complete all as specified and directed
M&L for prepration of old new surfaces including cornices, pilasters etc(Plastered or unplasterd surfaces) and applying one coats of white (Lime) wash on wall complete all as specified and directed
M&L for prepration of old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified.(Note:-Using roller for painting and use scrapping machine for scrapping work)
M&L for prepration of old steel/iron surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified.
S&F In repair Vitreous china squatting pan water closet, orissa pattern, size 580x440mm, white with integral foot rests including 'P' or 'S' trap of same material (excluding flushing cistern and flush pipe), provn of cement concrete/lime concrete and jointing to flush pipe (fixed in repair) and making good to dismantled/damaged tiling floor in cement mortar M-15 (1:2:4) type B-1 (using 20mm graded crushed stone aggregated) complete all as specified and directed by Engr-in-charge.
S&F in repair Vitreous china coloured wash down water closet pan (Padestal Pattern), (fixed in repair), including connection to flush pipe, 'P' or 'S' trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device (excluding flushing cistern and flush pipe), and making good to dismantled/damaged tiling floor in cement mortar M-15 (1:2:4) type B-1 (using 20mm graded crushed stone aggregated) complete all as specified and directed by Engr-in-charge. Note for serial item No 1 to 99: - (i) Contractor or his rep will report at complaint cell/office in the morning by 9:00 Hrs to receive day to day complaints. (ii) Complaint should be attend/completed within 48 Hrs after receiving complaint slip failing which a panelty of rate 500/- will be recovered of each complaint from the contractor dues or become dues. (iii) Debris materials obtain from demolition/dismantling shall be removed from the site, outside Md land, Failing which a panel recovery from contractor Rs 500.00 per cum will be recovered from contractor dues or become dues. (iv) The cost of above operation as stated in Notes serial No (i) to (iv) shall be deemed to be included in quoted rates nothing extra shall be paid on this account.
A V ENTERPRISES
M/S KAPIL ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .