Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Ref. No.
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹8.6 L
Closing Date
15 Nov 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DGM
POWERGRID CORPORATION OF INDIA LIMITED, Vadodara, Gujarat
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
WR2/NT/W-CIVIL/DOM/G01/23/08915
Open
Civil Works - Buildings
Works
Itarsi MP
₹8.6 L
25 Oct 2023
25 Oct 2023
15 Nov 2023
25 Oct 2023
14 Nov 2023
25 Oct 2023
I While filling up the worksheets following may please be observed :
(i) Fill up only green shaded cells.
(ii) Certain data type entries have been restricted, such as Numeric values or limits of numeric values.
(iii) Select only the options provided in pull down menus.
(iv) Do not link any cell of this work book with any other work book.
(v) Do not use copy & paste or cut & paste options for filling up the data.
(vi) Do not reformat any of the cell of the work book.
II This Workbook consists of following worksheets :
Opening page of the workbook.
Names of Bidder :
● Select Sole Bidder or JV (Joint Venture) from the pull down menu. Do not leave this cell blank.
● Select nos. of the JV Partners other than the Lead Partner from drop down menu.
● In case of JV partners more than 2, enter details of 3rd & more partners along with details of 2nd partner.
● Fill up names and address of the Sole Bidder and /or Joint Venture.
● Fill up date in dd-mmm-yyyy format from drop down menu.
● Click for Sch-1 given at the right top of the worksheet to go to Sch-1.
Sch -1 : (Abstract Of Cost)
● Summary of all the Schedules shall be displayed automatically.
● No cell is required to be filled in by the bidder in this worksheet.
Sch-2 (Schedule Items for Civil Works for FOR CONSTRUCTION OF TL STORE (50m x 10 m) FOR BANASKANTHA SUBSTATION ) :
● Schedule Items: only % above/below DSR-2014 is to be filled up.
● Total amount shall get calculated automatically.
Sch-3 (Non-Schedule Items for FOR CONSTRUCTION OF TL STORE (50m x 10 m) FOR BANASKANTHA SUBSTATION ) :
● Non-Schedule Items: Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.
● Total amount shall get calculated automatically.
● The rate quoted shall be inclusive of the Service Tax.
Sch-4 (Schedule Items for CONSTRUCTION OF OPEN STORE YARD OF SIZE (110m x 40) m for BANASKANTHA SUBSTATION ) :
● Schedule Items: only % above/below DSR-2014 is to be filled up.
● Total amount shall get calculated automatically.
Sch-5 (Non-Schedule Items for CONSTRUCTION OF OPEN STORE YARD OF SIZE (110m x 40) m for BANASKANTHA SUBSTATION ) :
● Non-Schedule Items: Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.
● Total amount shall get calculated automatically.
● The rate quoted shall be inclusive of the Service Tax.
Sch-6 ( INTERNAL ELECTRIFICATION WORKS OF 50x10 STORE SHED FOR BANASKANTHA SUBSTATION ) :
● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.
● Total amount shall get calculated automatically.
● The rate quoted shall be inclusive of the Service Tax.
Bid from 2nd Envelope :
● Fill up ref. no. as bidder's ref no. of this letter.
● This letter shall consider the net price as per Sch-3 .
● Fill up names & Designation of the representatives of other JV partner(s) if the bidder is JV (Joint Venture) .
● Fill up additional information as required.
Happy Bidding !
Name of Package : Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
Package No : 5002002942
Specification No. : WR2/NT/W-CIVIL/DOM/G01/23/08915
Completion Period 11 Months
Name of Package :
Construction of Residential Quarters B1 (6 units), B3 (2 units), D (1 unit) type at 400/220 kV Itarsi Sub-Station
Enter following details of the bidder
Specify type of Bidder [Select from drop down menu] Individual Firm
Name of Sole Bidder [Individual Firm]
Address of Registered Office & Mobile Numbers …….. …… ………. ……….
पावर ग्रिड कारपोरेशन ऑफ इंडिया लिमिटेड
POWER GRID CORPORATION OF INDIA LTD.
WRTS-II,RHQ,VADODARA
BILL OF QUANTITIES FOR Construction of Residential Quarters B2 (12 units), D (1 unit) type, Guest House and Community Center including parking shed, concrete roads, Drains and Culverts, water supply & Sewerage system at Itarsi S/s under O&M Add CAP in tariff block 2019-24.
Name of Package: Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi.
(SCHEDULE OF RATES AND PRICES)
Sl. No. Activity Header / Substation Name Service Code SAC Whether SAC in column ‘2’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘4’ is confirmed. If Not indicate applicable rate of GST # Description (DSR'21 Items- Civil Works) Unit Quantity Unit Erection Charges Deduction of GST factor considered in DSR Unit Erection Charges excluding GST Total Erection Charges excl GST Total Tax GST @ 18% Total Erection Charges incl. GST
(Service Accounting Codes)
PART -A : Schedule Items as per DSR 2021 (Civil works)
1 400 kV Itarsi S/s 120000008 995428 18% 1.1 Carriage of materials by mechanical transport including loading, unloading and stacking CuM 737.00 180.40 0.1405 158.18 116575.89 20983.66 137559.55
1.1.2 EARTH upto 1.00 km.
2 400 kV Itarsi S/s 120000345 995433 18% 2.6 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. CuM 1109.00 205.45 0.1405 180.14 199775.58 35959.60 235735.19
120000345 995433 2.6.1 All kinds of soil
3 400 kV Itarsi S/s 120000349 995433 18% 2.8 Earth work in excavtion by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 mtr. In width or 10 sqm on plan) including dressing of sides and ramming of bottoms lift up to 1.5 mtr. Including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 mtr. CuM 1535.00 286.85 0.1405 251.51 386071.68 69492.90 455564.58
2.8.1 All kind of soil
4 2.10 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc and disposing of the suplus excavated soil as directed, within a lead of 50m:
400 kV Itarsi S/s 120000354 995433 18% 2.10.1.2 Pipes, cables etc exceeding 80 mm dia but not exceeding 300mm dia Mtrs 165.00 417.35 0.1405 365.94 60379.44 10868.30 71247.74
5 400 kV Itarsi S/s 120000391 995433 18% 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides, of the foundation etc. in layers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering, lead upto 50 mtrs and lift upto 1.5 mtrs. CuM 1942.00 253.95 0.1405 222.67 432416.40 77834.95 510251.35
6 400 kV Itarsi S/s 120000392 995433 18% 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked materials. CuM 1120.00 104.50 0.1405 91.63 102621.66 18471.90 121093.56
2.26.1 All kinds of Soil
7 400 kV Itarsi S/s 120000407 995433 18% 2.34 Supplying chemical emulsion in sealed containers including delivery as specified Litre 440.00 200.90 0.1405 176.15 77506.36 13951.14 91457.50
2.34.1 Chloropyriphos/Lindane emulsifiable concentrate of 20%
4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering : All works upto plinth level.
8 400 kV Itarsi S/s 120000442 995454 18% 4.1.8 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) CuM 103.00 6326.05 0.1405 5546.73 571313.59 102836.45 674150.04
9 400 kV Itarsi S/s 120000450 995454 18% 4.2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor,etc., up to floor five level, excluding the cost of centering,shuttering and finishing : CuM 11.50 9375.20 0.1405 8220.25 94532.92 17015.93 111548.85
4.2.3 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
10 400 kV Itarsi S/s 120000456 995457 18% 4.3 Centering and shuttering including strutting, propping etc. and removalof form work for : SqM 100.00 307.95 0.1405 270.01 27001.32 4860.24 31861.55
4.3.1 Foundations, footings, bases for columns Sqm
11 400 kV Itarsi S/s 120000470 995454 18% 4.10 Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size). SqM 124.00 370.85 0.1405 325.16 40320.39 7257.67 47578.06
12 400 kV Itarsi S/s 120000472 995454 18% 4.12 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. per 50 kg cement 32.50 57.15 0.1405 50.11 1628.56 293.14 1921.70
13 400 kV Itarsi S/s 120000473 995454 18% 4.13 Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. SqM 124.00 113.85 0.1405 99.82 12378.26 2228.09 14606.34
14 400 kV Itarsi S/s 120000477 995454 18% 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. SqM 238.00 681.65 0.1405 597.68 142247.00 25604.46 167851.46
15 0.00% 5.9 Centring and shuttering including strutting propping etc. and removal of form for :
A 400 kV Itarsi S/s 120000499 995457 18% 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. SqM 206.00 307.95 0.1405 270.01 55622.71 10012.09 65634.80
B 400 kV Itarsi S/s 120000500 995457 18% 5.9.2 Walls (any thickness) including attached pilasters, buttresses, plinth & string courses etc. SqM 292.00 669.55 0.1405 587.07 171423.59 30856.25 202279.83
C 400 kV Itarsi S/s 120000501 995457 18% 5.9.3 Suspended floors, roofs, landings, balconies and access platform SqM 896.00 766.55 0.1405 672.12 602217.27 108399.11 710616.38
D 400 kV Itarsi S/s 120000503 995457 18% 5.9.5 Lintels, beams, plinth beams, girders, bressumers & cantilevers SqM 1390.00 608.35 0.1405 533.41 741434.90 133458.28 874893.18
E 400 kV Itarsi S/s 120000504 995457 18% 5.9.6 Columns, pillars, piers abutments posts & struts SqM 1082.00 804.25 0.1405 705.17 762997.37 137339.53 900336.90
F 400 kV Itarsi S/s 120000505 995457 18% 5.9.7 Stairs (excluding landings) except spiral staircases. SqM 58.50 657.75 0.1405 576.72 33738.16 6072.87 39811.03
G 400 kV Itarsi S/s 120000511 995457 18% 5.9.13 Vertical and horizontal fins individually or forming box louvers,bands,facias,and eaves boards. SqM 254.50 1100.40 0.1405 964.84 245551.78 44199.32 289751.10
H 400 kV Itarsi S/s 120000513 995457 18% 5.9.15 Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like SqM 34.00 307.95 0.1405 270.01 9180.45 1652.48 10832.93
J 400 kV Itarsi S/s 120000518 995457 18% 5.9.19 Weather shade, chajjas, corbels etc. including edges. SqM 71.50 814.95 0.1405 714.56 51090.68 9196.32 60287.01
16 400 kV Itarsi S/s 120000525 995454 18% 5.11 Extra for additional height in centring &, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentring at all levels over a height of 3.5 m for every additional height of 1m or part thereof (Plan area to be measured) Metre 48.00 319.25 0.1405 279.92 13436.21 2418.52 15854.73
5.11.1 Suspended floors, roofs, landings, beams and balconies (Plan area to be measured)
17 400 kV Itarsi S/s 120000543 995454 18% 5.22 Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in postion and binding all complete up to plinth level. Kg. 34015.00 89.65 0.1405 78.61 2673778.83 481280.19 3155059.01
5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.
18 400 kV Itarsi S/s 120000549 995454 18% 5.22A Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in postion and binding all complete above plinth level. Kg. 41500.00 89.65 0.1405 78.61 3262143.80 587185.88 3849329.68
5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.
19 400 kV Itarsi S/s 120000560 995478 18% 5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Metre 181.00 64.70 0.1405 56.73 10268.04 1848.25 12116.29
20 5.33 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately).
B 400 kV Itarsi S/s 120000564 995454 18% 5.33.2.1 All works above plinth level upto floor V level CuM 281.00 10306.20 0.1405 9036.56 2539274.18 457069.35 2996343.53
21 400 kV Itarsi S/s 120000568 995454 18% 5.35 Add for using extra cement in the items of design mix over and above the specified cement content therein. Quintal 341.00 688.45 0.1405 603.64 205840.82 37051.35 242892.16
22 400 kV Itarsi S/s 120000601 995456 18% 6.1 Brick work with common burnt clay F .P .S. (non modular) bricks of class designation 7.5 in foundation and plinth in: CuM 84.00 6658.25 0.1405 5838.01 490392.81 88270.71 578663.52
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand)
23 400 kV Itarsi S/s 120000607 995456 18% 6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : CuM 319.00 8288.35 0.1405 7267.30 2318267.12 417288.08 2735555.20
6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand)
24 400 kV Itarsi S/s 120000618 995456 18% 6.13 Half brick masonry with common burnt clay F .P .S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. SqM 909.00 1018.05 0.1405 892.63 811405.04 146052.91 957457.95
6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand)
25 400 kV Itarsi S/s 120000620 995456 18% 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry . SqM 909.00 86.45 0.1405 75.80 68902.28 12402.41 81304.69
26 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
A 8.2.1 Rajnagar plain White marble/Udaipur green marble/Zebra black marble
B 8.2.2 Granite of any colour and shade
27 400 kV Itarsi S/s 120000742 995474 18% 8.4 Extra for fixing marble /granite stone, over and above corresponding basic,item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. Metre 43.00 475.55 0.1405 416.97 17929.55 3227.32 21156.87
28 400 kV Itarsi S/s 120000743 995474 18% 8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. Each 28.00 808.15 0.1405 708.59 19840.60 3571.31 23411.90
29 400 kV Itarsi S/s 120000751 995474 18% 8.9 Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. SqM 5.67 3105.50 0.1405 2722.93 15439.00 2779.02 18218.03
8.9.1 8mm thick
8.9.1.2 Granite of any colour and shade
30 400 kV Itarsi S/s 120003230 995474 18% 8.31 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. SqM 334.00 1063.45 0.1405 932.44 311435.60 56058.41 367494.01
31 400 kV Itarsi S/s 120000808 995476 18% 9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. SqM 135.00 3086.10 0.1405 2705.92 365298.99 65753.82 431052.81
9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
32 400 kV Itarsi S/s 120000833 995476 18% 9.31 Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, as per directions of Engineer-in-charge: SqM 70.50 2427.85 0.1405 2128.76 150077.53 27013.96 177091.49
9.31.2 30 mm thick shutters
33 400 kV Itarsi S/s 120000863 995476 18% 9.46 Providning and fixing curtain rods of 1.25 mm thick chromium plated brass plate,with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs etc, wherever necessary complete: Metre 104.74 482.30 0.1405 422.88 44292.94 7972.73 52265.67
34 400 kV Itarsi S/s 120000867 995476 18% 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Kg 1227.00 197.70 0.1405 173.35 212694.34 38284.98 250979.33
9.48.2 Fixed to openings/wooden frames with rawl plugs & screws etc.
35 400 kV Itarsi S/s 120000965 995476 18% 9.88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Each 11.00 817.50 0.1405 716.79 7884.70 1419.25 9303.95
36 400 kV Itarsi S/s 120000968 995476 18% 9.90 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Each 36.00 286.30 0.1405 251.03 9037.09 1626.68 10663.77
9.90.2 Size 50 mm
37 400 kV Itarsi S/s 120000971 995476 18% 9.91 Providing and fixing chromium plated brass 50mm cupboard or wardrobe knob with nuts complete; Each 36.00 122.50 0.1405 107.41 3866.73 696.01 4562.74
38 0.00% 9.96 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.
39 9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete
40 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
41 400 kV Itarsi S/s 120001000 995476 18% 9.101 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour & shade with necessary screws etc. complete Each 73.00 62.25 0.1405 54.58 3984.44 717.20 4701.64
9.101.2 Twin rubber stopper
42 9.114 Providing and fixing magnetic catcher of approved quality in cupboard /ward robe shutters, including fixing with necessary screws etc. complete.
B 400 kV Itarsi S/s 120001020 995476 18% 9.114.2 Double strip (horizontal type) Each 36.00 34.15 0.1405 29.94 1077.95 194.03 1271.98
43 400 kV Itarsi S/s 120001021 995476 18% 9.115 Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer in charge. One set 76.00 355.05 0.1405 311.31 23659.62 4258.73 27918.36
44 400 kV Itarsi S/s 120001028 995476 18.00% 9.119 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. Metre 100.00 408.25 0.1405 357.96 35795.70 6443.23 42238.93
45 400 kV Itarsi S/s 120001036 995476 18% 9.124 Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge. SqM 43.50 3194.40 0.1405 2800.88 121838.14 21930.87 143769.01
9.124.2 Decorative finish (both side wood grained finish)
46 400 kV Itarsi S/s 120001044 995476 18% 9.130 Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge. SqM 153.00 1668.30 0.1405 1462.78 223805.26 40284.95 264090.21
9.130.1 With decorative veneering on one side and commercial veneering on other side
47 400 kV Itarsi S/s 120001117 995476 18% 10.3 Providing & fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x 5 mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. SqM 13.50 9397.35 0.1405 8239.68 111235.62 20022.41 131258.03
48 10.14 Providing and fixing pressed steel door frames conforming to IS:4351 manufactured from commercial mild steel of 1.60 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm or base ties of 1.60mm, pressed mild steel welded or rigidly fixed together by mechanical means, including MS pressed butt hinges 2.5mm thick with mortar guards lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of surface as directed by the engineer in charge.
10.14.1.1 Fixing with adjustable lugs with split end tail to each jamb
10.14.2.1 Fixing with adjustable lugs with split end tail to each jamb
49 400 kV Itarsi S/s 120001147 995476 18% 10.18 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. Each 52.00 185.20 0.1405 162.38 8444.02 1519.92 9963.94
50 400 kV Itarsi S/s 120001153 995476 18% 10.25 Steel work welded in built up sections / framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required Kgs. 1355.00 142.30 0.1405 124.77 169063.13 30431.36 199494.49
10.25.2 In gratings, frames, guard bars, ladders, railings, brackets, gates and similar works.
51 400 kV Itarsi S/s 120001154 995477 18% 10.26 Providing and fixing hand rail of approved size by welding etc. to steel ladder raling balcony raling , stair case raling and similar works including applying a priming coat of approved steel primier. Kgs. 620.00 157.15 0.1405 137.79 85430.07 15377.41 100807.49
10.26.1 M.S. Tube
52 400 kV Itarsi S/s 120001162 995476 18% 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Kg 60.00 612.25 0.1405 536.83 32209.56 5797.72 38007.28
53 400 kV Itarsi S/s 120001227 995474 18% 11.23 Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : SqM 141.00 2100.40 0.1405 1841.65 259672.42 46741.04 306413.46
11.23.5 Udaipur green marble
54 400 kV Itarsi S/s 120001229 995474 18% 11.24 Extra for pre finished nosing to treads of steps of marble stone. Metre 164.00 593.30 0.1405 520.21 85314.51 15356.61 100671.12
55 400 kV Itarsi S/s 120001230 995474 18% 11.25 Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre . SqM 76.00 701.50 0.1405 615.08 46746.16 8414.31 55160.47
56 400 kV Itarsi S/s 120001249 995474 18% 11.40 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. Sqm 65.00 1225.10 0.1405 1074.18 69821.57 12567.88 82389.45
57 400 kV Itarsi S/s 120001251 995474 18% 11.41 Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades,laid on 20 mm thick cement mortar 1:4(1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. SqM 616.00 1500.55 0.1405 1315.69 810468.04 145884.25 956352.29
11.41.2 Size of tile 600 X 600 mm
58 400 kV Itarsi S/s 120001259 995474 18% 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. SqM 84.00 1416.65 0.1405 1242.13 104338.97 18781.02 123119.99
11.46.2 Size of Tile 600x600 mm
59 400 kV Itarsi S/s 120001267 995474 18% 11.48 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling /grouting and finishing complete as per direction of Engineer-in-charge. SqM 616.00 258.65 0.1405 226.79 139700.48 25146.09 164846.57
11.48.2 Size of Tile 600x600 mm
60 400 kV Itarsi S/s 120001274 995474 18% 11.50 Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. SqM 616.00 11.70 0.1405 10.26 6319.33 1137.48 7456.81
61 400 kV Itarsi S/s 120001317 995453 18% 12.20 Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. SqM 8.87 620.00 0.1405 543.62 4823.24 868.18 5691.42
62 400 kV Itarsi S/s 120001318 995453 18% 12.21 Providing gola 75 X 75 mm in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge) including finishing with cement mortar 1: 3 ( 1 cement : 3 fine sand) as per standard design: Metre 326.00 260.20 0.1405 228.15 74375.45 13387.58 87763.03
12.21.1 In 75 X 75 mm deep chase
63 400 kV Itarsi S/s 120001319 995453 18% 12.22 Making khurras 45 x 45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1mx1mx400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete. Each 21.00 266.60 0.1405 233.76 4908.90 883.60 5792.50
64 120001318 995453 12.41 Providing and fixing on wall face unplasticised -Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes.
65 400 kV Itarsi S/s 18% 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised - Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
66 400 kV Itarsi S/s 120001365 995453 18% 12.43 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised -PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. Each 57.00 309.50 0.1405 271.37 15468.22 2784.28 18252.49
67 400 kV Itarsi S/s 120001366 995453 18% 12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams. Each 22.00 47.90 0.1405 42.00 923.98 166.32 1090.30
13.4.2 1:6 (1 cement : 6 coarse sand).
69 400 kV Itarsi S/s 120001408 995472 18% 13.5 15 mm cement plaster on rough side of single or half brick masonry wall of mix : SqM 1436.00 339.10 0.1405 297.33 426959.75 76852.76 503812.51
13.5.2 1:6 ( 1 cement : 6 coarse sand)
70 400 kV Itarsi S/s 120001415 995472 18% 13.9 Cement plaster 1:3 ( 1cement : 3 coarse sand) finished with a floating coat of neat cement : SqM 80.00 386.55 0.1405 338.93 27114.42 4880.60 31995.02
13.9.1 12 mm cement plaster
71 400 kV Itarsi S/s 120001418 995472 18% 13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). SqM 1990.00 442.75 0.1405 388.21 772531.78 139055.72 911587.51
13.16.1 1:3 (1 cement : 3 fine sand)
73 400 kV Itarsi S/s 120001423 995472 18% 13.24 Extra for plastering done on moulding cornices or architraves including neat finish to line and level: SqM 40.00 587.20 0.1405 514.86 20594.48 3707.01 24301.48
13.24.1 In one coats
74 400 kV Itarsi S/s 120001437 995472 18% 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. SqM 3440.00 214.30 0.1405 187.90 646376.15 116347.71 762723.86
75 400 kV Itarsi S/s 120001456 995473 18% 13.37 White washing with lime to give an even shade: SqM 517.00 32.45 0.1405 28.45 14709.91 2647.78 17357.69
13.37.1 New work (three or more coats)
76 400 kV Itarsi S/s 120001465 995473 18% 13.45 Finishing walls with textured exterior paint of required shade : SqM 399.00 245.00 0.1405 214.82 85712.41 15428.23 101140.64
13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm.
77 400 kV Itarsi S/s 120001467 995473 18% 13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: SqM 1592.00 162.35 0.1405 142.35 226620.96 40791.77 267412.73
13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
78 400 kV Itarsi S/s 120001490 995473 18% 13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : SqM 192.00 131.45 0.1405 115.26 22129.24 3983.26 26112.51
13.61.1 Two or more coats on new work
13.68.1 Two or more coats on new works including a coat of wood filler.
80 400 kV Itarsi S/s 120001517 995473 18% 13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. SqM 3440.00 121.55 0.1405 106.58 366621.66 65991.90 432613.56
13.83.2 Two coats
81 13.85 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.
A 400 kV Itarsi S/s 120001520 995473 18% 13.85.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre SqM 122.32 61.45 0.1405 53.88 6590.61 1186.31 7776.92
B 400 kV Itarsi S/s 120001522 995473 18% 13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre SqM 3440.00 64.45 0.1405 56.51 194395.44 34991.18 229386.62
82 400 kV Itarsi S/s 995428 18% 16.91 Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator , filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per anufacturer's specifications & direction of Engineerin-Charge. SqM 120.75 932.35 0.1405 817.49 98712.20 17768.20 116480.39
16.91.1 60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern.
83 400 kV Itarsi S/s 120001868 995478 18% 17.1 Providing and fixing water closet Squatting pan (Indian WC type) with 100 mm sand cast iron P or S trap, 10 litres low level white PVC flushing cistern including flush pipe with manually controlled device (handle lever) confirming to IS 7231 with all fittings and fixtures complete including, cutting and making good the walls and floors wherever required. Each 9.00 5781.35 0.1405 5069.14 45622.23 8212.00 53834.23
17.1.1 White vitreous china Orissa pattern WC pan of size 580 mm x 440 mm with integral type foot rest,
84 400 kV Itarsi S/s 995478 18% 17.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer Each 20.00 3459.05 0.1405 3032.92 60658.48 10918.53 71577.01
85 400 kV Itarsi S/s 120001902 995478 18% 17.10 Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per IS:13983 with CI brackets and stainless steel plug 40 mm, including painting of fittings & brackets cutting and making good the walls wherever required Each 9.00 6008.45 0.1405 5268.26 47414.34 8534.58 55948.92
17.10.1 Kitchen sink with drain board
17.10.1.4 Size 510 x 1040 bowl depth 178 mm
86 400 kV Itarsi S/s 995478 18% 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineerin-charge. Each 20.00 886.25 0.1405 777.07 15541.43 2797.46 18338.89
87 400 kV Itarsi S/s 995478 18% 17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia Each 3.00 6119.15 0.1405 5365.32 16095.97 2897.27 18993.24
88 17.28 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete
17.28.1 Semi Rigid pipe
89 400 kV Itarsi S/s 120001940 995478 18% 17.30 Providing and fixing in position 25 mm diameter mosquito proof coupling of approved muncipal design Each 20.00 45.30 0.1405 39.72 794.39 142.99 937.38
90 400 kV Itarsi S/s 120001941 995478 18% 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 20.00 1411.15 0.1405 1237.31 24746.16 4454.31 29200.47
91 400 kV Itarsi S/s 120001946 995478 18.00% 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P . Brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Each 20.00 942.15 0.1405 826.09 16521.70 2973.91 19495.61
92 400 kV Itarsi S/s 120001947 995478 18% 17.34 Providing and fixing toilet paper holder : Each 20.00 680.80 0.1405 596.93 11938.62 2148.95 14087.58
17.34.1 C.P. brass
93 400 kV Itarsi S/s 120002049 995478 18% 17.69 Providing and fixing PTMT Waste Coupling for wash basin and sink,of approved quality and colour. Each 9.00 109.70 0.1405 96.19 865.67 155.82 1021.49
17.69.2 Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms
94 400 kV Itarsi S/s 120002052 995478 18% 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. Each 4.00 146.30 0.1405 128.28 513.11 92.36 605.47
95 400 kV Itarsi S/s 120002053 995478 18% 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour , weighing not less than 88 gms. Each 20.00 204.70 0.1405 179.48 3589.65 646.14 4235.79
96 400 kV Itarsi S/s 120002055 995478 18% 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved qualityand colour Each 20.00 600.35 0.1405 526.39 10527.84 1895.01 12422.85
17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.
97 400 kV Itarsi S/s 120002056 995478 18% 17.74 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. Each 20.00 607.05 0.1405 532.27 10645.33 1916.16 12561.49
98 400 kV Itarsi S/s 120002062 995478 18% 17.78 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover , and cistern fittings, nuts, bolts and gasket etc complete. Each 11.00 13036.55 0.1405 11430.56 125736.12 22632.50 148368.63
99 0.00% 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall
100 0.00% 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
101 18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work
102 18.13 Making connection of G.I distribution branch with G.I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc complete
103 18.17 Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end)
104 400 kV Itarsi S/s 120002153 995424 18% 18.18 Providing and fixing ball valve (brass) of approved quality High or low pressure with plastic floats complete. Each 13.00 399.15 0.1405 349.98 4549.72 818.95 5368.66
18.18.3 25 mm nominal bore
105 18.19 Providing and fixing gun metal non- return valve of approved quality (screwed end) :
A 18.19.3 40 mm nominal bore
B 18.19.4 50 mm nominal bore
106 400 kV Itarsi S/s 120002171 995424 18% 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions : Each 46.00 85.20 0.1405 74.70 3436.39 618.55 4054.94
18.21.2 45 cm length
18.21.2.1 15 mm nominal bore
107 400 kV Itarsi S/s 120002173 995424 18% 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : Each 20.00 166.35 0.1405 145.86 2917.14 525.09 3442.23
18.22.1 100 mm diameter
108 400 kV Itarsi S/s 120002228 995424 18% 18.32 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : Each 10.00 1712.15 0.1405 1501.23 15012.28 2702.21 17714.48
18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
109 18.46 Providing & fixing GI union in GI Pipe including cutting and threading the pipe and making long screws etc. complete ( New work )
110 400 kV Itarsi S/s 120002286 995424 18% 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. per litre 11000.00 9.70 0.1405 8.51 93555.46 16839.98 110395.44
111 400 kV Itarsi S/s 120002287 995424 18% 18.49 Providing & fixing CP brass bib cock of approved quality conforming IS:8931. Each 56.00 434.20 0.1405 380.71 21319.77 3837.56 25157.33
18.49.1 15 mm nominal bore
112 400 kV Itarsi S/s 120002289 995424 18% 18.51 Providing & fixing CP brass long body bib cock of approved quality conforming IS standards and weighing not less than 690gms Each 54.00 708.40 0.1405 621.13 33541.08 6037.39 39578.47
18.51.1 15 mm nominal bore
113 400 kV Itarsi S/s 120002290 995424 18% 18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. Each 34.00 594.75 0.1405 521.48 17730.38 3191.47 20921.85
18.52.1 15 mm nominal bore
114 400 kV Itarsi S/s 120002291 995424 18% 18.53 Providing & fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. Each 98.00 500.35 0.1405 438.71 42993.69 7738.86 50732.55
18.53.1 15 mm nominal bore
115 400 kV Itarsi S/s 120002305 995424 18% 18.58 Providing and fixing PTMT grating of approved quality and colour Each 37.00 169.70 0.1405 148.79 5505.39 990.97 6496.36
18.58.2 Rectangular tupe with openable circular lid
18.58.2.1 150 mm nominal size square 100mm diametre of the inner hinged round grating
116 400 kV Itarsi S/s 120002324 995424 18% 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. Each 17.00 96.75 0.1405 84.83 1442.13 259.58 1701.71
117 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
118 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)all around SW pipes including bed concrete as per standard design.
119 400 kV Itarsi S/s 120002642 995424 18% 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : Each 25.00 2534.00 0.1405 2221.83 55545.81 9998.25 65544.06
19.4.3 180x150 mm size P type
19.4.3.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
120 400 kV Itarsi S/s 120002665 995424 18% 19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Each 35.00 11687.10 0.1405 10247.35 358657.17 64558.29 423215.46
19.7.1 Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total wt. of cover and frame to be not less than 38 kg. (wt. of the cover 23 kg and wt. of the frame 15 kg.)
19.7.1.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
19.8.1 Size 90 x 80 cm
19.8.1.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
122 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
21.1.1.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
B 400 kV Itarsi S/s 120002795 995476 18% 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Kg 1249.00 573.40 0.1405 502.76 627949.67 113030.94 740980.61
21.1.2.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
123 21.3 Providing and fixing glazing in aluminium door, window,ventilator,shutter and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectual drawings and the directions of Engineer in charge(Cost of aluminium snap beading shall be paid in basic item)
A 400 kV Itarsi S/s 120002798 995476 18% 21.3.1 With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm) SqM 127.00 1019.80 0.1405 894.17 113559.49 20440.71 134000.20
B 400 kV Itarsi S/s 120002799 995476 18% 21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) SqM 54.00 1325.55 0.1405 1162.25 62761.68 11297.10 74058.79
124 400 kV Itarsi S/s 120002807 995476 18% 21.8 Filling the gap in between aluminium frame and adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in Charge complete. Metre 736.00 85.25 0.1405 74.75 55014.47 9902.60 64917.07
21.8.1 Up to 5mm depth and 5mm width
125 400 kV Itarsi S/s 120002812 995476 18% 21.11 Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineerin-charge complete. Each 145.00 329.20 0.1405 288.65 41853.57 7533.64 49387.22
126 400 kV Itarsi S/s 120002823 995476 18% 21.15 Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Each 288.00 78.25 0.1405 68.61 19759.75 3556.76 23316.51
21.15.3 Polyester powder coated minimum thickness 50 micron aluminium
127 400 kV Itarsi S/s 120002835 995453 18% 22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) SqM 116.00 516.60 0.1405 452.96 52543.27 9457.79 62001.06
128 22.7 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies terraces etc. consisting of following operations. (a) Applying a slurry coat of neat cement using 2.75Kg/sq.m. of cement admixed with water proofing compound conforming to IS:2645 and approved by Engneer in charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b)Laying brick bats with mortar using broken bricks/brick bats 25mm to 1115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer in charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer in charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of the junctions of walls and slabs.
(c )After two days of proper curing applying a second coat of cement slurry using 2.75 kg/sq.m. of cement admixed with water proofing compound conforming to IS:2645 and approved by the Engineer in charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order & as directed and specified by the Engineer-in-charge.
400 kV Itarsi S/s 120002837 995453 18% 22.7.1 With average thickness of 120 mm and minimum thickness at Khurra as 65mm SqM 720.00 1522.95 0.1405 1335.34 961441.47 173059.47 1134500.94
Total of Schedule Items as per DSR'21 ₹ 32,337,409.68 ₹ 5,820,733.74 ₹ 38,158,143.42
Add percentage (%) above/below +/- on DSR 2021 Rates (to be quoted by contractor) 0.00%
Add Amount above/below +/- on the amount for DSR Items as per quoted percentage 0.00 0.00
Total of Schedule Items Part IIIA ₹ 32,337,409.68
Total Tax ₹ 5,820,733.74
Date: #REF! Name: #REF!
Place: #REF! Designation: #REF!
# In case the bidder leaves the cell for confirmation of the SAC and/or GST rate “blank”, the SAC and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.
पावर ग्रिड कारपोरेशन ऑफ इंडिया लिमिटेड
POWER GRID CORPORATION OF INDIA LTD.
WRTS-II,RHQ,VADODARA
BILL OF QUANTITIES FOR Construction of Residential Quarters, Guest House and Community Center including parking shed, concrete roads, Drains and Culverts, water supply & Sewerage system at Itarsi S/s under O&M Add CAP in tariff block 2019-24.
Name of Package: Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi.
(SCHEDULE OF RATES AND PRICES)
Sl. No. Activity Header / Substation Name Activity Description SAC Whether SAC in column ‘3’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘4’ is confirmed. If Not indicate applicable rate of GST # Description Unit Quantity Unit Erection Charges Total Erection Charges Total Tax GST Remarks B2 Type D Type
(Service Accounting Codes) 1 block 3 block
Part B: Non - Schedule Items (Civil works)
1 400 kV Itarsi S/s Non-Schedule Item 995433 18% NS-01: Supply and filling of good quality moorum under floor in layers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering, consolidating and dressing complete. (Measurement shall be based on compacted volume) CuM 439.00 0.00 0.00 Rate referred from LOA No. WR-II/C&M/Qtr/Bhuj/LOA-175 dtd 29.07.2020 (PART - B) increasing 20% 114.00 342.00 100.00
2 400 kV Itarsi S/s Non-Schedule Item 995472 18% NS-02 : Forming groove of uniform size in the external plaster surface as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge. 20 mm wide and 6 mm deep groove Metre 190.00 0.00 0.00 0.00 0.00 190.00
3 400 kV Itarsi S/s Non-Schedule Item 995433 18% NS-3 : Diluting and injecting chemical emulsion (excluding of the cost of the chemical emulsion) for PRE-CONSTRUCTIONAL ANTI-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (Plinth area of the building at ground floor only shall be measured for payment). Chlorpyriphos / Lindane Emulsifiable concentrate 20% with 1% concentration. SqM 656.00 0.00 0.00 162.00 486.00 181.00
4 400 kV Itarsi S/s Non-Schedule Item 995411 18% NS-4 : Providing & fixing rubber shock absorbers of minimum 25mm dia and 40mm length to be fixed on back side of door including screws etc. all complete. Each 88.00 0.00 0.00 33.00 99.00 10.00
5 400 kV Itarsi S/s Non-Schedule Item 995428 18% NS-5: Providing and placing cinder/brick bat filling to the sunk floors in toilets/kitchen sunks, well compacted carefully by hand beating to required slopes including consolidation, curing, (mix shall be one part of cement mortar 4 parts of Cinder/brickbat finishing the same with the cement mortor 1:4 (1cement:4 coarse sand) by adding water proofing compound as per manufacturers recommendations including providing 25mm dia PVC drain pipe of required length. For toilet and Kitchen sunkun portions. CuM 23.00 0.00 0.00 8.00 24.00 6.00
6 NS-6 : Providing, fixing , laying, testing & commissioning (Concealed/surface mounted or underground) uPVC SWR Rigid pipes confirming to IS 13592-1992 of PRICE/SUPREME/FINOLEX or equivalent make of working pressure 6kg/sq.cm for drainage line including necessary fittings such as couplers, bends, tees, cross tees, cowls, clamps, rubber packing ring etc. confirming to DIN 19561, DIN 19534, IS 14735-99, IS-5382, joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing of the line etc. complete at all levels. (Centre line length of completed pipe line shall be measured for payment purpose)
A 400 kV Itarsi S/s Non-Schedule Item 995428 18% NS-6A : 40mm outer dia. Metre 87.00 0.00 0.00 36.00 108.00 15.00
B 400 kV Itarsi S/s Non-Schedule Item 995416 18% NS-6B : 75mm outer dia. Metre 186.00 0.00 0.00 72.00 216.00 26.00
C 400 kV Itarsi S/s Non-Schedule Item 995424 18% NS-6C : 110mm outer dia. Metre 92.00 0.00 0.00 40.00 120.00 12.00
7 400 kV Itarsi S/s Non-Schedule Item 995424 18% NS-7 : Providing, fixing, testing and commissioning uPVC SWR Nahani trap, plain floor trap/ Multi floor trap with strainer/top cover etc. confirming to DIN 19531, DIN 19534, IS 14735-99, IS-5382 of 110 mm dia inlet and 75 mm outlet nominal dia. including fixing PVC reducer of 110mm dia. to 75 mm dia. and jointing with adhessive solvent cement including cost of cutting and making good the walls and floors at all levels etc. complete. Each 55.00 0.00 0.00 20.00 60.00 9.00
8 400 kV Itarsi S/s Non-Schedule Item 995454 18% NS-8 : Grouting of pressed steel door frames, profile-B and Profile-C with CC 1:2:4(1 cement: 2 sand: 4 graded stone agrregate 12.5mm nominal size) CuM 2.74 0.00 0.00 1.04 3.12 0.39
9 400 kV Itarsi S/s Non-Schedule Item 995411 18% NS-9 : Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clrestory windows using wire gauge with average width of aperture 1.4mm in both directions with wire of dia. 0.50mm all complete. In sliding aluminium window shutter as well as ventilators SqM 45.50 0.00 0.00 21.00 63.00 5.50
10 400 kV Itarsi S/s Non-Schedule Item 995411 18% NS-10 : Providing and fixing 25 to 35mm thick both side semi polished black kadappah stone slab in shelves, fixing in cement mortar 1:3 including necessary cutting and making good the walls, curing and cleaning complete. SqM 102.00 0.00 0.00 41.00 123.00 19.00
11 NS-11 : Providing & fixing Hindware make or equivalent bathroom accessories including cutting wall/making holes and making good the surface with the same finish as directed by the Engineer in charge.
A 400 kV Itarsi S/s Non-Schedule Item 995424 18% NS-11A : CP brass high flow single lever concealed diverter with body and plate for bath and shower system equivalent to Kohler make K-72329IN-4FP-CP or Jaquar make FUS-CHR-29227 Each 17.00 0.00 0.00 4.00 12.00 3.00
B 400 kV Itarsi S/s Non-Schedule Item 995424 18% NS-11B: CP brass hand shower (Health faucet) for WC/EWC system equivalent to Jaquar make ALD-CHR-573 or Kohler make K-12925IN-CP Each 20.00 0.00 0.00 4.00 12.00 3.00
12 400 kV Itarsi S/s Non-Schedule Item 995478 18% NS-12 : Providing and fixing C.P. brass towel ring of make kohler cat no- 17528T-CP or Jaquar Continental: ACN-CHR-1121N or equivalent make fixed with PVC cleats and brass screws including cutting and making good the walls wherever required complete as directed by Engineer-in-charge. Each 4.00 0.00 0.00 0.00 0.00 4.00
13 400 kV Itarsi S/s Non-Schedule Item 995478 18% NS-13: Providing and Fixing Towel rack with single rail of make Jaquar -Cat No: AHS-CHR-1581 or ,kohler cat no- 17529T-CP or equivalent as approved with Rawl Plugs and brass screws complete as directed by Engineer-in-charge. Each 3.00 0.00 0.00 0.00 0.00 3.00
14 400 kV Itarsi S/s Non-Schedule Item 995424 18% NS 14: Providing and Fixing C.P. brass Central Hole basin mixer without pop up waste system of make Jaquar Model: CON-CHR-167KNB or kohler cat no- 16027IN-4ND-CP or equivalent make as approved with 450mm long copper pipe and brass nuts including cutting and making good the walls wherever required complete as directed by Engineer-in-charge. Each 4.00 0.00 0.00 0.00 0.00 2.00
15 400 kV Itarsi S/s Non-Schedule Item 995424 18% NS 15 : Providing and Fixing Over head Rose shower with revolving joint (with body rotation), 115 mm long shower arm of make Jaquar Cat No: OHS-CHR-1989 or kohler cat no- 16356IN-A-CP or equivalent make as approved complete as directed by Engineer-in-charge Each 3.00 0.00 0.00 0.00 0.00 2.00
16 400 kV Itarsi S/s Non-Schedule Item 995478 18% NS 16 : Providing and Fixing Soap dish of make Jaquar Continental ACN-CHR-1131 N or kohler cat no- 17524T-CP or equivalent make as approved with PVC / Wooden plugs and screws including making good the walls wherever required complete as directed by Engineer-in-charge. Each 4.00 0.00 0.00 0.00 0.00 3.00
17 400 kV Itarsi S/s Non-Schedule Item 995471 18% NS-17 : Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in alkuminium doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). SqM 12.00 0.00 0.00 4.80 14.40 2.40
Total for Non-Schedule Items (Schedule II) ₹ 0.00 ₹ 0.00
# In case the bidder leaves the cell for confirmation of the SAC and/or GST rate “blank”, the SAC and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.
Date : #REF! Printed Name : #REF!
Place : #REF! Designation : #REF!
# In case the bidder leaves the cell for confirmation of the SAC and/or GST rate “blank”, the SAC and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.
पावर ग्रिड कारपोरेशन ऑफ इंडिया लिमिटेड
POWER GRID CORPORATION OF INDIA LTD.
WRTS-II,RHQ,VADODARA
(SCHEDULE OF RATES AND PRICES)
Schedule 3C (DSR-Electrical)
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
Sr. No. SAC (Service Accounting Codes) Whether SAC in column ‘3’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘5’ is confirmed. If not indicate applicable rate of GST # DSR Item 2022 ITEM DESCRIPTION Unit Quantity Unit Erection Charges Deduction of GST factor considered in DSR Unit Erection Charges excluding GST Total Erection Charges excl GST Total Tax GST @ 18%
1 1.1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
2 995461 18% 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface I recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Point 13 1562 0.1405 1370 17804 3204.80
3 995461 18% 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
995461 (Mains wiring from MDB to RCCB of SDB as per single line drawing, & direction of Engr-in-charge.)
(PVC insulated copper conductor multistrand wires from SDB to 25A/16A Power points as per drawing, & direction of Engr-in-charge).
(1100V grade PVC insulated copper conductor multistrand wires From SDB to SB,SDB to 5 A Independent socket, 5A to 5A socket, SB to SB , MDB to Common SDB etc as per Drawing & direction of Engg-In -charge).
(c) 995461 18% 1.24.4 3 pin 5/6 amp socket outlet (for Switch board Type SBC) Nos. 67 122 0.1405 107 7167 1290.07
provided on the same switch board wherever required as per the drawing,site condition & direction of engg-in-charge Crabtree Cat.No ACVKSWW063 (Verona series) or equivalent.
(d) 1.24.8 Bell push BP
995461 18% 10A one way bell push with indicator Dura Crabtree cat ACVSBXW101 or equivalent. Nos. 9 140 0.1405 123 1105 198.86
4 995461 18% 1.26 Modular blanking plate on existing modular plate & switch box excluding modular plate as required Crabtree cat ACVPPBWX01 (Verona series) or equivalent. Nos. 50 40 0.1405 35 1754 315.65
INDEPENDENT POINTS
5 995461 18% 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front in recess, including providing andfixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modularswitch, connection etc. as required. Make Crabtree (Verona series) or equivalent SWITCH BOARD RA Nos. 86 477 0.1405 418 35968 6474.32
6 995461 18% 1.32 Supplying and fixing suitable size GI box with modular plate andcover in front in recess, including providing andfixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. Make Crabtree (Verona series) or equivalent SWITCH BOARD RB Nos. 42 586 0.1405 514 21580 3884.40
7 995461 and 998736 18% 1.32 and 2.10.1 Supplying and fixing suitable size GI box with modular plate andcover in front in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 16 amps modular MCB type-C ,connection etc. as required. Make Crabtree (Verona series)or equivalent SWITCH BOARD RAC Nos. 29 842 0.1405 738 21410 3853.78
8 995461 18% 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Make crabtree model ACVRFHW005 or equivalent Nos. 50 369 0.1405 324 16177 2911.88
TELEPHONE POINT :-
Supply, laying, delivery ,testing & installation towards telephone point wiring including supply of medium gauge PVC(MMS) conduit (ISI approved), PVC insulated 2 pair of 0.5 mm dia. electrolytic tinned copper wire in a separate PVC conduit from the telephone tag block(EPABX) to individual( telephone outlet point as per the drawing, site condition including its associated accessories and others of the following :-
9 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required
(a) 995461 18% 1.21.1 Rigid 20MM PVC conduits with required associated accessories MTRS. 760 128 0.1405 112 85296 15353.27
10 1.18 Supplying and drawing following pair 0.5 mm dia FRLS PVCinsulated annealed copper conductor, unarmored telephone cablein the existing surface/ recessed steel/ PVC conduit as required.
2 pair 0.5mm telephone cable with high density polyethylene insulated, solid annealed high conductivity along with rip cord Finolex (or) eqvnt..
11 995461 18% 1.24.6 Supply,deliverty. installation ,testing and fixing of RJ11 telephone socket outlet of Crabtee Cat No ACVKRTW111 or equivalent in the required configuration as per the drawing, interior layout, site condition including termination at both ends as per specification and as per direction of Engg-in-charge. Set 38 148 0.1405 130 4931 887.61
Supply,delivery, laying and installation towards T.V. antena point wiring with RG8Fcoaxial cable in separate recessed medium gauge(MMS) PVC conduit from Junction box (incorporating the TV Amplifier) to individual T.V. socket as per the drawing, interior layout, site condition and as per direction of engg-in-charge for the following :-
12 995461 18% 1.21.1 Rigid PVC conduits with required associated accessories 20MM MTRS. 580 128 0.1405 112 65094 11716.97
13 995424 18% 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mmsolid copper conductor PE insulated, shielded with fine tinnedcopper braid and protected with PVC sheath in the existingsurface/ recessed steel/ PVC conduit as required. MTRS. 580 47 0.1405 41 23902 4302.32
14 995461 18% 1.24.7 TV antenna socket outlet Set 29 148 0.1405 130 3763 677.39
Supply, testing,delivery,installation and fixing of T.V. socket outlet Crabtree ACVKTOW001 (Verona Series) or Equivivalent in the required configuration including termination at both ends as per direction of engg-in-charge.
Sub Distribution Board-SDB
15 998736 18% 2.3.4 Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCB/RCCB/Isolator) Nos. 12 3141 0.1405 2754 33049 5948.76
(a) 16 Way , Double door (Havells Pearl Ivory double door Cat DHDPSHODPW16 or Equivalent )
(b) 998736 18% 2.4.3 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Nos. 1 5967 0.1405 5232 5232 941.74
8 Way (4+24), Double door (Havells Pearl Ivory double door Cat DHDPTHODPW08 or Equivalent)
16 2.14 Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB),having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioningetc. as required.
998736 18% 2.14.2 40 amps (30mA residual current,Short ckt 10kA,Test button IS12640 Part-1 ) of L&T ,Havells ,C&S (or) equivalent Nos. 8 2642 0.1405 2317 18532 3335.80
17 2.15 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.(For D type Quater )
998736 18% 2.15.2 40 amps (30mA residual current,Short ckt 10kA,Test button IS12640 Part-1 ) of L&T ,Havells ,C&S (or) equivalent Nos. 1 3188 0.1405 2795 2795 503.15
18 2.13 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. In the existing DB (For D type Quarter only)
19 998736 2.10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C”curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete with connections,testing and commissioning etc. as required.
1 Pole MCBs Type-C of following rating,10KA Short circuit rating installed in the outgoing above SDBs as per single line / power schematic diagram.
Cat no. NC 106N/110N/116N/120N/132N make L&T ,Havells ,C&S (or) equivalent.
Supply, laying, installation,connecting,testing & commissioning of following earthing station, earthing conductor for difference purposes as specified in the technical specification & as per IS:3043 :-
20 998739 18% 5.11 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I.pipe(Class-B) from earth electrode including connection with G.I. nut,bolt, spring, washer excavation and re-filling etc. as required mtrs. 100 706 0.1405 619 61903 11142.48
21 998739 18% 5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Set 4 7472 0.1405 6552 26206 4717.09
Total of Schedule Items as per DSR'22 ₹ 2,007,870.23 ₹ 361,416.64
Add percentage (%) above/below +/- on DSR 2022 Rates (to be quoted by contractor) 0.00%
Add Amount above/below +/- on the amount for DSR Items as per quoted percentage 0.00 0.00
Total of Schedule Items Part IIIA ₹ 2,007,870.23
Total Tax ₹ 361,416.64
# In case the bidder leaves the cell for confirmation of the SAC and/or GST rate “blank”, the SAC and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.
Schedule 3C (DSR-Electrical)
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
Sl. No. SAC Whether SAC in column ‘2’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘4’ is confirmed. If Not indicate applicable rate of GST # Description Unit Quantity Unit Erection Charges Total Erection Charges Total Tax GST
(Service Accounting Codes)
Non Schedule Items
1 995461 Main Incoming Panel
NS-1 Supplying, delivery,erecting, testing and commissioning of Main Incoming Panel made of CRCA sheet of 14 gauge (2mm) of size 1.2m(H) x 1m(W) x 0.3m (D) with double door provision having hinged front door of suitable size including cutting, bending, welding,drilling, rivetting,etc and Powder Coated. with suitable mounting arrangement mounted on angle iron frame of size 35X35X5mm to be mounted in staircase area at ground floor at suitable location as per site condition, as per direction of engg-in-charge suitable for housing seperately the following items. The front door shall have self locking arrangement with weather & water proof neoprene good quality gasket and the MDB should have the provision of suitable dia holes for incoming and outgoing cables complete as required as per technical specification :-
18% Incomer Set 4 0.00 0.00
a) 1 no. of Four pole of 415/500V, 100A rating MCCB of approved L&T / Havells /Schnider or Equivalent make to be erected as incomer MCCB. 0.00
b) Required Busbar having 4 nos. of 100A rating of size 25x5mm Al. busbar mounted in support insulator as per technical specification, single line diagram inside the Main incomer panel with suitable mounting arrangement. 0.00
c) 3 nos. of LED type R, Y & B phase Indication lamp in incomer side of L&T make or eqvnt. approved make. 0.00
d) 5 nos. of three phase change over switches for switching of phases in case of any phase failure of 415/500V, 40A rating of HCL Elektra V3N32A 3 Way with off or eqvnt. approved make to be erected as outgoing unit. 0.00
Complete with necessary inter connection between FP MCCB, incoming cable, Requied size busbar, Phase change over switch, all mounted inside the Main incoming panel in phase segregated manner ,duly wired with and tested as per the Single line diagram with required size of PVC copper wires, required terminal connectors etc., as per requirement, technical specification, site condition and direction of engg-in-charge complete in all respect. 0.00
2 998736 18% NS-2 Supply,delivery, installation, testing & commissioning of 2 Pole ISOLATOR,40A rating installed in the outgoing above SDBs as per single line / power schematic diagram. Havells Cat.No. DHMIOPDX040 or equivalent . (5 Nos for each panel in a Block including for common area Ckt.) Nos 8 0.00 0.00
3 995461 18% NS-3 Supplying,delivery, erecting, testing & commissioning of AC Static Watthour meter of 10-40A range suitable for measurement of energy (KWH) in 1 - phase, 2 wire. load conforming to IS:13779 of latest edition; CBIP publication and as per technical specification complete erected / mounted inside the above provided Meter box panel with suitable mounting accessories including wiring with required size of weather proof Cu PVC multistrand wire duly tested for class I accuracy in an approved manner, as per direction of engg-in-charge. (5 Nos for each panel in a Block including for common area lighting ) Nos 8 0.00 0.00
(Note :- The Meter should be of L&T / Havells / Secure make, Respective test certificate / calibration certificate to be submitted which is prerequisite.) 0.00
4 995461 18% NS-4 Supplying,erecting, testing & commissioning of AC Static Watthour meter of 5-40A range suitable for measurement of energy (KWH) in 3 - phase, 4 wire load conforming to IS:13779 of latest edition; CBIP publication and as per technical specification complete erected on polished TW board/ metal plate mounted in suitable size weather proof FRP box made of 2.7mm thick permanent grey colour along with ELMEX make terminal connectors having locking arrangement with lock and key and suitable visual indicator plastic sheet for mounting the energy meter including wiring from DB / SFU Unit to meters with required size of weather proof Cu PVC multistrand wire duly tested for class I accuracy in an approved manner, as per direction of engg-in-charge. Nos 1 0.00 0.00
(Note :- The meter should be of L&T / Havells / Secure make or Equivivalent, Respective test certificate / calibration certificate to be submitted which is prerequisite.)
LIGHT FIXTURES & FANS
5 995461 18% NS-5 Supply and installation of 36W Ceiling light surface mounted LED luminaire complete with diffuser ABS housing and lamp having minimum two years warranty for Living/drawing room area as per drawing, civil layout, site condition and direction of engg-in-charge. Wipro Immaculate cat. no. CRCO10S036HP57 or equivalent DECORATIVE CEILING LIGHT CH Nos 10 0.00 0.00
6 995461 18% NS-6 Supply and installation of Decorative moulded body, round, ceiling mounted fixture having CRI ≥ 70 with electronic driver and 9W LED lamp having minimum 2 years warranty. high grade ABS housing, UV stabilised diffuser for glare free light. Finish: Matt finish white matching ABS body. The power factor is to be grater than 0.9. Pre-wired with 230V rated and suitable for 1.5 sqmm wire connection ready to use Havells Luna-4Pin Cat LHDC28209024 or equivalent SPOT LIGHT SL Nos 42 0.00 0.00
7 995461 18% NS-7 Supply and installation of Decorative square moulded body, ceiling mounted fixture having CRI ≥ 70 with 9W LED lamp having life over 30000 burning hours and minimum 2 years warranty. Housing Made up of high grade ABS, UV stabilized diffuser for glare free light.Finish with matching ABS body The power factor is to be greater than 0.9. .Lamp holders :Pre-wired with 230V rated and pre-fitted with lamp suitable for 1.5 sqmm wire connection ready to useHavells Matrix-4Pin Cat LHDC18109030or equivalent SPOT LIGHT SLB Nos 18 0.00 0.00
8 995461 18% NS-8 Supplying,delivery,erecting, testing and commissioning of environment friendly energy efficient sleek energy saver luminaire of 18W LED light fixture having minimum two years waranty with Housing Made up of ultra slim extruded aluminium, powder coated with white finish. white coloured ABS end caps provided and with high quality diffuser for glare free light. Pre-wired with 230V having in-built driver pre-fitted with lamp of 18W having power factor ≥ 0.90 along with other accessories connected with necessary 1.5 sq.mm flexible wire as required as per interior layout, site condition and direction of engg-in-charge. Havells E-Lite Cat LHEXBLP7IN1W018 or equivalent TUBE LIGHT TL Nos 60 0.00 0.00
9 995461 18% NS-9 Supplying,delivery,erecting, testing and commissioning of Asthetically designed circular shaped decorative wall/ ceiling light fixture suitable for 12W LED fixture with minimum two years warranty , ABS Housing Made up of high quality, high temperature resistantABS. Reflector made up of high quality, high temperature resistant polycarbonate in white colour.Cover,Circular shape made up of high quality, high temperature resistant polycarbonate in black colour, fixed to the housing with 4 nos. self tapping screws provided with the fixture.Diffuser in opal matt finish for soothing light effect with no UV and IR radiations and CRI ≥ 70 . Havells KORONA 2 Cat LHEHCFP7UL6K012 or equivalent PERIPHERAL LIGHT -BL Nos. 19 0.00 0.00
10 995461 18% NS-10 Supplying,delivery,erecting, testing and commissioning of asthetically designed decorative wall mounting fixture along with suitable 9W retrofit LED lamp having minimum two years warranty. Specification Housing Made up of high grade CRCA steel sheet, epoxy powder coated white after phosphochromate treatment.Reflector Made up of high purity pre anodised aluminium sheet.Diffuser Thermoformed methacrylate, UV stabilised, heat resistant acrylic cover in parabolic shape, opal finish for glare control and soothing light effect to create proper ambience.Lamp holder B22 lamp holder in engineering plastic grade provided as standard. Havells Beetle Cat LHDL07150099 or equivalent. BRAKET LIGHT TYPE- BL Nos. 54 0.00 0.00
11 995461 18% NS-11 Supply delivery,testing and erecting 6 Watt LED Mirror Light fixture with minimum two years warranty having lumens ≥540, CRI ≥80 – Syska Make SSK-T5-6W or equivalent. MIRROR LIGHT - ML Nos. 15 0.00 0.00
12 995421 18% NS-12 Supplying, erecting, testing and commissioning of high speed 48" (1200mm sweep) , 400 RPM , Air Delivery 230 CMM ,double ball bearing ceiling fan with condenser A.C. 230V, 50 cycles with canopy, down rod upto 300mm length with rubber bushing, bolts & nuts in the provided fan hook box of required size complete erected of Havells Velocity HS model or equivalent. Nos. 50 0.00 0.00
13 995421 18% NS-13 Supplying, delivery,erecting, testing and commissioning of exhaust fan of 1200 RPM of 250mm size Air Delivery 860 CMH Made of High quality engineering plastic resistant to colour change with anti static properety with bracket blades complete for light duty suitable for operate 230V 50Hz, AC supply. with cawl for using in Kitchen Havells Ventilair DX model or equivalent . Nos. 9 0.00 0.00
14 995421 18% NS-14 Supplying, delivery,erecting, testing and commissioning of exhaust fan of 1280 RPM of 200mm size Air Delivery 520 CMH Made of High quality engineering plastic resistant to colour change with anti static properety with bracket blades complete for light duty suitable for operate 230V 50Hz, AC supply. with cawl for using in Kitchen Havells Ventilair DX model or equivalent. Nos. 14 0.00 0.00
Total for Non-Schedule Electrical Items ₹ 0.00 ₹ 0.00
# In case the bidder leaves the cell for confirmation of the SAC and/or GST rate “blank”, the SAC and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.
(SUMMARY OF TAXES & DUTIES)
Sl. No. Item Nos. Total Price (in ₹)
1 TOTAL GST on Services
a. Total GST on Supply & Installation Services (indentified in Schedule-3A) which are not included in the Installation as per the provision of the Bidding Documents, as applicable 5820733.74
b. Total GST on Supply & Installation Services (indentified in Schedule-3B) which are not included in the Installation as per the provision of the Bidding Documents, as applicable 0.00
c. Total GST on Supply & Installation Services (indentified in Schedule-3C) which are not included in the Installation as per the provision of the Bidding Documents, as applicable 361416.64
d. Total GST on Supply & Installation Services (indentified in Schedule-3D) which are not included in the Installation as per the provision of the Bidding Documents, as applicable 0.00
2 GRAND TOTAL [a+b+c+d] 6182150.38
Date : 0 Printed Name :
Place : 0 Designation :
Construction of Residential Quarters B1 (6 units), B3 (2 units), D (1 unit) type at 400/220 kV Itarsi Sub-Station
Sl. No. Description Total Price (INR)
1 Service/Installation Charges
a. TOTAL SCHEDULE NO.-3A
Supply & Installation Charges- Schedule Civil Items 3233,74,09.68
b. TOTAL SCHEDULE NO.-3B
Supply & Installation Charges- Non-Schedule Civil Items ,,0.00
c. TOTAL SCHEDULE NO.-3C
Supply & Installation Charges- Schedule Electrical Items 200,78,70.23
d. TOTAL SCHEDULE NO.-3d
Supply & Installation Charges- Non-Schedule Electrical Items ,,0.00
2 Grand Total (a+b+c+d) (ITEMS TAB: Item 01 for BID PRICE SUMMARY Statement ) 3434,52,79.91
3 TOTAL SCHEDULE NO.-5
Total GST against Service/Installation Charge (ITEMS TAB: Item 02 for BID PRICE SUMMARY Statement ) 618,21,50.38
4 Grand Total (2+3)
Grand Total Inclusive of GST 4052,74,30.29
Name of Package : Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
Package No : CIVIL Works Package
Specification No. : WR2/NT/W-CIVIL/DOM/G01/23/08915
Completion Period 11 Months
: Attachments : General guidelines for filling up the Attachments : CIVIL Works Package :
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
Specification No.: WR2/NT/W-CIVIL/DOM/G01/23/08915
1 Fill up only green shaded cells in the relevent attachments.
2 Attachments 3(JV), 3(QR), Attach QR, 4, 4(A), 4(B), 5, 6, 7, 9, 10, 11, 12, 13, 14, 15, 16, 17,18, 19 and Bid Form for 1st Envelope are included here.
3 Attachment 1 Bid Security : Applicable
4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.
5 Attachment 8 Manufacturer’s Authorisation Form : Not Applicable
6 Attachment 14 Integrity Pact : To be submitted as per ITB Clause No. 9.3(n) and as per remarks in the Attach 14-IP.
7 Attachment 18 Safety Pact : Not Applicable
8 Attachment 20: Declaration of Key Managerial Person jointly with Power of Attorney holder
9 Attachment 21: Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII order, if applicable
10 Attachment 22: Not Applicable
11 Attachment 23: Not Applicable
12 Attachment 24: Not Applicable
13 Attachment 25: Compliance to the process related to the e-RA Terms & Conditions and the Business Rules governing the e-RA
14 Attachment 26:Declaration by the Bidder regarding events encountered pursuant to ITB Clause 2.1
15 Attachment 27:Certification by the Bidder as per DoE Order in line with ITB Clause 2.1
16 Attachment 28:Not Applicable
Note : Enable the Active X Control & Macros. Also ensure to keep option of "Trust acess to VBA project object Model" cheched [√]. Ensure that you work on MS Excel 2007 or higher version.
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
WR2/NT/W-CIVIL/DOM/G01/23/08915 Sole Bidder 1
Yes JV (Joint Venture) 2 or More
Enter following details of the bidder No
Specify type of Bidder [Select from drop down menu] Sole Bidder Sole Bidder 2 0
Address of Bidder
Whether the bidder is an MSE (Micro & Small Enterprise) 0 2 2 0 2019
Enter the Name of Registration Authority 2020
E-mail ID of Bid Signatory
Mobile No. of Bid Signatory
Tel No. of Bid Signatory
Fax No. of Bid Signatory MSE 0
Name of other Partner Ram Lal
Address of other Partner G5
Name of other Partner - 2 (more, if any)
Address of other Partner - 2 (more, if any)
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-3(JV) Sole Bidder
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(Joint Venture Agreement and Power of Attorney for Joint Venture*)
Bidder’s Name and Address : To:
Contract Services & Ram Lal
Name : 0 Power Grid Corporation of India Ltd.,
Address : 0 Western Region Transmission System-II
0 RHQ, Plot No 54 Vadodara-390008
This Attachment is Not Applicable
Name(s) and Addresse(s) of other partner(s)
The Joint Venture Agreement (as per the proforma attached at no. 15 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) and Power of Attorney for Joint Venture (as per the proforma attached at no. 14 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) are enclosed herewith Sole Bidder
Date : -- Printed Name : 0
Place : Designation : 11
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-3(QR)
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(Qualifying Requirement Data)
Bidder’s Name and Address (Lead Partner of) : To:
Contract Services
Name: 0 Power Grid Corporation of India Ltd.,
Address: 0 "Saudamini", Plot No. 2, Sector 29
0 Gurgaon (Haryana) - 122001
In support of the Qualification Requirements (QR) for bidders, stipulated in Annexure-A (BDS) of the Section - III (BDS), Volume-I & Additional Information required as per ITB clause 9.3(c) of the Bidding Documents, we furnish herewith our QR data/details along with other information, as follows herewith our stipulations have been reproduced in italics for ready reference, however, in case of any discrepancy the QR as given in BDS shall prevail).
* We have submitted bid as individual firm.
* We have submitted bid as joint venture of following firms :
(ii) #REF! 2 or more
(* Strike-off whichever is not applicable)
[For details regarding Qualification Requirements of a Joint Venture, please refer para 4.0 below.]
We are furnishing the following details/document in support of Qualifying requirement for the subject package.
A Attached copies of original documents defining :
a) The constitution or legal status;
b) The principal place of business;
c) The place of incorporation (for bidders who are corporations); or the place of registration and the nationality of the Owners (for applicants who are partnerships or individually-owned firms).
B Attached original & copies of the following documents :
a) Written power of attorney of the signatory of the Bid to commit the bidder.
b) Joint Venture Agreement.
1.0 GENERAL INFORMATION
Bidder is required to provide general information as per the following format.
[Where the Bidder proposes to use named subcontractor(s) for critical components of the works or for work contents in excess of ten (10) percent of the bid price, the following information should also be supplied for the subcontractor(s)].
S No. Particulars Name of the Bidder
1 Name of the Firm
2 Head Office/ Registered Office Address
5 Contact Person
6 Place of Incorporation/ Registration
7 Year of Incorporation/ Registration
8 Nationality of
9 Whether the bidder is an MSE (Micro & Small Enterprise). If Yes, attach Documentary Evidence with the Bid. No
10 Whether the Bidder is a Start-Ups Company (as defined by DIPP). If Yes, attach Documentary evidence with the Bid.
2.0 TECHNICAL REQUIREMENTS {Reference para 1.0 of Annexure-A (BDS)}
2.1 TECHNICAL EXPERIENCE
2.1.1 Route-1: The bidder must have designed, manufactured, tested & supplied 715 kV or higher voltage class one (1) number 1-phase Transformer of at least 500 MVA capacity or at least three (3) numbers 1-phase Transformers each having a capacity of at least 166 MVA, and the same transformer (s) should have been in satisfactory operation# for at least two (2) years on the date of bid opening as originally scheduled i.e., as on .………….(date to be inserted by CS department at the time of NIT).
2.1.2 Route-2: The bidder (s) who have established production line and testing facilities in India for 715 kV or above class transformer based on technological support of the Collaborator(s) for the equipment(s) can also be considered qualified provided, The bidder must have manufactured in India, type tested 715 kV or higher voltage class either One (1) no. 1-phase Transformer of at least 166 MVA capacity or One (1) no. 1-phase Reactor of at least 80 MVAR capacity and the same should have been supplied as on the date of bid opening as mentioned above based on technological support of Collaborator(s) provided that:- a) Collaborator(s) meets the Technical Experience criteria stipulated in Route-1. b) A legally enforceable undertaking jointly by Bidder and the Collaborator(s) (as per enclosed format in---------- of bidding document) is furnished along with the bid, to guarantee quality, timely supply, performance and warranty obligations for Five(5) years for entire quantity to be manufactured and supplied from the works in India and a confirmation letter from the Collaborator(s) along with the bid stating that Collaborator(s) shall furnish performance guarantee for an amount of 10% of the cost of such equipment(s). This performance guarantee shall be in addition to contract performance guarantee to be submitted by the bidder.
2.1.3 Route-3: In case, the bidder is an Indian Entity established as Subsidiary/JVC/Group company by its parent/principal, who have established production line and testing facilities in India for 715 kV or above class transformer based on technological support of the parent/principal for the equipment(s) can also be considered qualified provided, The bidder must have manufactured in India, type tested 715 kV or higher voltage class either One (1) no. 1-phase Transformer of at least 166 MVA capacity or One (1) no. 1-phase Reactor of at least 80 MVAR capacity and the same should have been supplied as on the date of bid opening as mentioned above based on technological support of Parent/ principal company provided that:- a) Parent / Principal Company meets the Technical Experience criteria stipulated in Route-1. b) A legally enforceable undertaking jointly by Bidder and the parent/ principal company (as per enclosed format in---------- of bidding document) is furnished along with the bid, to guarantee quality, timely supply, performance and warranty obligations for Five(5) years for entire quantity to be manufactured and supplied from the works in India and a confirmation letter from the parent/principal company along with the bid stating that parent/ principal company shall furnish performance guarantee for an amount of 10% of the cost of such equipment(s). This performance guarantee shall be in addition to contract performance guarantee to be submitted by the bidder.
In case bidder is a holding company, the technical experience referred to in para 2.1.1, 2.1.2 & 2.1.3 above shall be of that holding company only (i.e. excluding its subsidiary/group companies). In case bidder is a subsidiary of a holding company, the technical experience referred to in para 2.1.1, 2.1.2 & 2.1.3 above shall be of that subsidiary company only (i.e. excluding its holding company).
#satisfactory operation means certificate issued by the Employer certifying the operation without any adverse remarks.
2.1.4 Using the following format, each Bidder (individual firms or partners of a joint venture) is requested to list the experience as detailed above, on the basis of which the Bidder wishes to qualify. The information is to be summarised using following format for each experience of the Bidder
(The bidder shall attach documentary evidence, such as copies of utility certificates for completed contracts and copies of award letters etc. for ongoing contracts in support of his experience as listed in the following proforma for each Contract with the help of "Attach" Buttons provided in table given below).
2.2 Kindly mention below, whether 765 kV/ 400kV transformer(s) are being offered from Bidder himself OR from a qualified manufacturer [required to ascertain compliance to QR provision mentioned at para 1(C ), Annexure-A(BDS)].
(A) 765 kV Transformers being offered:
2.3 Format-A: (ROUTE-1) for 765kV Auto Transformer:
Format for the Bidder/ Collaborator/ Parent/Principal Company/Qualified Manufacturer of the Bidder who must have designed, manufactured, tested & supplied 715kV or Higher Voltage class Transformer in support of meeting the technical experience requirement of para 1(A) 1.1, Annexure-A to BDS, Section-III, Volume-I of the Bidding Documents)
1 Name of Bidder/Qualified Manufacturer (as applicable) : 0 0
2 Name & Address of the Collaborator/Parent /Principal Company (if applicable) 0
3 Name of Contract Undertaken (for 715kV or Higher Voltage class Transformers)
4 Contract Reference No. & Date of Award
5 Name and Address of the Employer/Utility for whom the Contract was executed by the firm
6 Voltage Level of Transformer erected under the Contract (Indicate 715kV or above class only)
7 Indicate Number of Transformer(s) under the above contract (1 phase Transformers with rating not less than 500 MVA OR Transformers in Banks of 3 single phase units of at least 166 MVA each)
8 MVA capacity of above mentioned 1-phase units
9 Name of the substation or switchyard
10 No. of years, the above Transformer are in operation as on the date of bid opening. (Originally Scheduled)
11 Scope of work involved under the Contract
(Tick whichever is/are applicable) of Transformer of Transformer of Transformer
12 Details of documents uploaded in support of the above stated experience
2.4 Format-B: (ROUTE-2) for 765kV Auto Transformer:
Format for Bidder(s)/ Manufacturer [who have established production line and testing facilities in India for 715kV or above class Transformer based on Technology Support of Collaborator(s)], in support of meeting the requirement of para 1(A) 1.2 (Route-2), Annexure-A to BDS, Section-III, Volume-I of the Bidding Documents
a Name of Bidder/Manufacturer
b Whether Bidder/Manufacturer has established production line and testing facilities in India for 715 kV or above class Transformer on the technological support of the Collaborator(s) ?
c Name of the Collaborator {The qualifying data/details for collaborator for the equipment is to be furnished in Format-A above)
Data/details of the Bidder/Manufacturer wishes/proposes to qualify through Route-2(Para 1.2, Annexure-A (BDS)), to be furnished below:
1 Name of Contract Undertaken
2 Contract Reference No. & Date of Award
3 Name and Address of the Employer/Utility for whom the Contract was executed by the Bidder
4A Indicate details below in case Contract executed for Transformer
(i) Voltage Level of Transformer manufactured & type tested under the Contract based on technological support of Collaborator. (Indicate 715kV or above class only)
(ii) MVA capacity of the above mentioned single phase Transformers
(iii) Indicate Number of Transformer(s) under the contract (Indicate nos. of single phase Transformer of atleast 166MVA)
(iv) Name of the substation or switchyard
(v) Date as on which the above mentioned Transformers supplied
(vi) whether the above Transformers are in operation as on the date of bid opening(originally scheduled).(Yes/No)
(vii) Scope of work involved under the Contract
(Tick whichever is/are applicable)
of Transformer of Transformer of Transformer
4B Indicate detail below in case Contract executed for Reactor
i Voltage Level of Reactor manufactured & type tested under the Contract based on technological support of Collaborator. (Indicate 715kV or above class only)
ii MVAR capacity of the above mentioned single phase Reactors
iii Indicate Number of Reactor(s) under the contract (Indicate nos. of Reactor(s) of at least 80 MVAR each)
iv Name of the substation or switchyard
v Date as on which the above mentioned Reactors are supplied.
vi whether the above Reactors are in operation as on the date of bid opening(originally scheduled).(Yes/No)
vii No. of years, the above Reactors are in operation as on the date of bid opening (originally scheduled).
vii Scope of work involved under the Contract
(Tick whichever is/are applicable) for Reactor for Reactor for Reactor
5 Whether collaborator(s) meets the technical experience criteria stipulated at 2.1.1 above, and the details of which is mentioned at Format-A above. (Applicable for the Bidder wish/proposes to qualify through Route-2 of Annexure-A(BDS)) Yes
6 Whether legally enforceable undertaking jointly by Bidder/Manufacturer and the Collaborator(s) (as per enclosed format in Section-VI: Sample Forms and Procedures of bidding document) is furnished along with the bid. (Applicable for the Bidder/Manufacturer(s) wish/proposes to qualify through Route-2 of Annexure-A(BDS))
7 Confirmation letter from the Collaborator along with the bid stating that Collaborator shall furnish performance guarantee, in addition to contract performance guarantee to be submitted by the bidder, for an amount of 10% of the cost of equipment(s) to be manufactured and supplied from the works in India. (Applicable for the Bidder/Manufacturer(s) wish/proposes to qualify through Route-2 of Annexure-A(BDS)) (Choose whichever is applicable from the drop down menu)
8 Details of documents uploaded in support of the above stated experience
2.5 Format-C: (ROUTE-3) for 765kV Auto Transformer:
Format for Manufacturer of the Bidder/ Indian entity established as Subsidiary/ JVC/ Group Company by its Parent/ Principal, who have established production line and testing facilities in India for 715kV or above class Transformer, in support of meeting the requirement of para 1(A) 1.3, Annexure-A to BDS, Section-III, Volume-I of the Bidding Documents)
a Name of Bidder/ Manufacturer
b Whether the bidder is an Indian Entity established as Subsidiary/JVC/Group company by its parent/principal, who have established production line and testing facilities in India for 715 kV or above class transformer based on technological support of the parent/principal?
c Name & Address of the Parent/Principal Company {The qualifying data for the Parent/Principal Company for the equipment is to be furnished in Format-A above)
Data/details of the Bidder/Manufacturer wishes/proposes to qualify through Route-3 (Para 1.3, Annexure-A (BDS)), to be furnished below:
1 Name of Contract Undertaken
2 Contract Reference No. & Date of Award
3 Name and Address of the Employer/Utility for whom the Contract was executed by the firm
4A Indicate detail below in case Contract executed for Transformer
i Voltage Level of Transformer manufactured & type tested under the Contract . (Indicate 715kV or above class only)
ii Indicate Number of Transformer(s) under the contract (Indicate nos. of single phase Transformer of atleast 166MVA )
iii MVA capacity of the above mentioned single phase Transformers
iv Name of the substation or switchyard
v Date as on which the above mentioned Transformers supplied
vi whether the above Transformers are in operation as on the date of bid opening(originally scheduled).(Yes/No)
vii No. of years, the above Transformers are in operation as on the date of bid opening (originally scheduled).
viii Scope of work involved under the Contract
(Tick whichever is/are applicable) of Transformer of Transformer of Transformer
4B Indicate detail below in case Contract executed for Reactor
i Voltage Level of Reactor manufactured & type tested under the Contract (Indicate 715kV or above class only)
ii MVAR capacity of the above mentioned single phase Reactors
iii Indicate Number of Reactor(s) under the contract (Indicate nos. of Reactor(s) of at least 80 MVAR )
iv Name of the substation or switchyard
v Date as on which the above mentioned Reactors are supplied.
vi whether the above Reactors are in operation as on the date of bid opening(originally scheduled).(Yes/No)
vii No. of years, the above Reactors are in operation as on the date of bid opening(originally scheduled)..
viii Scope of work involved under the Contract
(Tick whichever is/are applicable) for Reactor for Reactor for Reactor
5 Whether Parent/Principal company(s) meets the technical experience criteria stipulated at 2.1.1 above, and the details of which is mentioned at Format-A above. (Applicable for the Bidder/Manufacturer(s) wish/proposes to qualify through Route-3 of Annexure-A(BDS))
6 Whether legally enforceable undertaking jointly by Bidder/Manufacturer and the Parent/Pricipal company(s) (as per enclosed format in Section-VI: Sample Forms and Procedures of bidding document) is furnished along with the bid. (Applicable for the Bidder/Manufacturer(s) wish/proposes to qualify through Route-3 of Annexure-A(BDS))
7 Confirmation letter from the Parent/Principal Company along with the bid stating that Parent/Principal Company shall furnish performance guarantee, in addition to contract performance guarantee to be submitted by the bidder, for an amount of 10% of the cost of equipment(s) to be manufactured and supplied from the works in India. (Applicable for the Bidder wish/proposes to qualify through Route-3 of Annexure-A(BDS))
8 Details of documents uploaded in support of the above stated experience
3.0 Financial Position {Reference para 2.0 of Annexure-A (BDS)}
a) Net Worth for last 3 financial years should be positive.
b) Minimum Average Annual Turnover^ (MAAT) for best three (3) years i.e. 36 months out of last five (5) financial years of the bidder should be Rs. 1451.18 million or equivalent for Auto Transformer TR09. ^ Annual gross revenue from operations/gross operating income as incorporated in the profit & loss account excluding other income”.
c) Bidder shall have liquid assets (L.A.) or/and evidence of access to or availability of credit facilities of not less than Rs. 241.86 million or equivalent for Auto Transformer TR09.
Note: (i) In case bidder is a holding company, the Financial Position criteria referred to in para 3.0 above shall be that of holding company only (i.e. excluding its subsidiary / group companies). In case bidder is a subsidiary of a holding company, the Financial Position criteria referred to in para 3.0 above shall be that of subsidiary company only (i.e. excluding its holding company). (ii) In case bidder has established manufacturing facility in India and yet to complete three (3) financial years, the Net Worth and average of the turnover as per financial statement for completed financial years shall be considered for the purpose of compliance to the specified Net Worth and MAAT requirements. (iii) In case of bidder qualifying through Route-3 but not meeting the Financial Position requirement as per note (i) read along with note (ii) above, the following shall be applicable: In case bidder is yet to complete five (5) years from the date of commercial production of such equipment(s) but no later than seven (7) years from the date of incorporation of the said company as on the originally scheduled date of bid opening as above, the financial position requirement as per para 3.0 (b) & (c) of parent/principal company providing collaboration for technological support shall be considered. However, once he meets the turnover requirement on their own or completes five (5) years from the date of commercial production of such equipment (s) in India but no later than seven (7) years from the date of incorporation as on the originally scheduled date of bid opening as above, the financial position requirements as specified at 3.0 (b) and (c) above shall be required to be met by such bidder on their own as per note (i) above and not based on their parent/principal company. Further, in case the bidder is yet to complete one (1) financial year, the Net worth requirement as per para 3.0 (a) above of parent/principal shall be considered.
(iv) Relaxation for Start-Ups^/ MSEs Start-Ups^/ MSEs, meeting the specified requirements at Para 3.0 (a) above in Financial Position shall also be considered qualified if they meet Eighty (80) % of the requirement specified at Para 3.0 (b) & 3.0 (c) above in Financial Position. ^ Start-Ups as defined by DIPP, applicable as on the originally scheduled date of bid opening.
{In support of its ‘Financial Position’, in line with the above, the Bidder or Company/Constituents must provide the relevant information in support of the same, along with documentary evidence, in the following format}
4.0 Financial Qualification Data: 2 or more
4.1 Name of the Bidder
Networth (in Rs. Millions) Details of documentary evidence submitted in support of Qualification Data
Sl No Financial year
For the FY of immediately preceding the date of submission of bid.
B Turnover details:
Turnover (in Rs. Millions) Details of documentary evidence submitted in support of Qualification Data
Sl No Financial year
For the FY of immediately preceding the date of submission of bid.
Average Annual Turnover for best Three Years is
C Liquid Assets
LA (in Rs. Millions) Details of documentary evidence submitted in support of Qualification Data
Details of evidence of having Liquid assets (LA)
Details of evidence of access to or availability of credit facilities
5.0 Financial Qualification Data for Parent/Principal Company (If Applicable):
5.1 Name of the Bidder
Details of documentary evidence submitted in support of Qualification Data
Networth (in Rs. Millions)
Sl No Financial year
For the FY of immediately preceding the date of submission of bid.
B Turnover details:
Details of documentary evidence submitted in support of Qualification Data
Turnover (in Rs. Millions)
Sl No Financial year
For the FY of immediately preceding the date of submission of bid.
Average Annual Turnover for best Three Years is
C Liquid Assets
LA (in Rs. Millions) Details of documentary evidence submitted in support of Qualification Data
Details of evidence of having Liquid assets (LA)
Details of evidence of access to or availability of credit facilities
Equivalent US$ (in Million) exchange rate* Details of documentary evidence submitted in support of Qualification Data
Networth (in Millions)
Sl No Financial year
Do you have audited results for FY 2016-17 Yes
*(Indicate the rate(s) of exchnage against US Dollar at the end of each year, which have been used for arriving the amount at equivalent US Dollar.)
B Turnover details:
Equivalent US$ (in Million) exchange rate* Details of documentary evidence submitted in support of Qualification Data
Turnover (in Millions)
Sl No Financial year
Do you have audited results for FY 2016-17 Yes
*(Indicate the rate(s) of exchnage against US Dollar at the end of each year, which have been used for arriving the amount at equivalent US Dollar.)
C Liquid Assets
LA Equivalent US$ (in Million)
Details of evidence of having Liquid assets (LA)
Details of evidence of access to or availability of credit facilities
Equivalent US$ (in Million) exchange rate* Details of documentary evidence submitted in support of Qualification Data
Networth (in Millions)
Sl No Financial year
Do you have audited results for FY 2016-17 Yes
*(Indicate the rate(s) of exchnage against US Dollar at the end of each year, which have been used for arriving the amount at equivalent US Dollar.)
B Turnover details:
Equivalent US$ (in Million) exchange rate* Details of documentary evidence submitted in support of Qualification Data
Turnover (in Millions)
Sl No Financial year
Do you have audited results for FY 2016-17 Yes
Average Annual Turnover for best Three Years is
*(Indicate the rate(s) of exchnage against US Dollar at the end of each year, which have been used for arriving the amount at equivalent US Dollar.)
C Liquid Assets
LA Equivalent US$ (in Million)
Details of evidence of having Liquid assets (LA)
Details of evidence of access to or availability of credit facilities
4.0 Joint Venture (JV) Firms {Reference para 3.0 of Annexure-A (BDS)}
In case a bid is submitted by a Joint Venture (JV) of two or more firms as partners, all the partners of Joint Venture shall meet collectively requirements stipulated at clauses 3.0 (b) & 3.0 (c) above. The figure of average annual turnover and liquid assets/credit facilities for each of the partners of the JV shall be added together to determine the JV’s compliance with the minimum qualifying criteria set out in Para 3.0 (b) & (c) above.
However, for a JV to be qualified, the partner(s) of JV must also meet the following minimum criteria: i. All the partners of the JV shall meet individually the Financial Position criteria given at 3.0 (a) above. ii. The Lead Partner shall meet, not less than 40% of the minimum criteria given at clause 3.0 (b) & (c) and 100 % of the criteria given above at clause 2.1 iii. The other partner(s) shall meet not less than 25% of the criteria given at clause 3.0 (b) & (c) above and 100 % of the criteria given above at clause 2.1 or 2.2 Failure to comply with this requirement will result in rejection of the joint venture’s bid.
In case of Joint venture, the following conditions shall also apply:
(a) the bid, and in case of successful bid, the specified Form of Agreement shall be signed so as to be legally binding on all partners (as per enclosed format in Section-VI, Vol.-I of bidding document).
(b) one of the partners shall be nominated as Lead Partner, and the Lead Partner shall be authorized to incur liabilities and receive instructions for and on behalf of any and all partners of the Joint Venture, and the entire execution of the Contract shall be done with the Lead Partner and payment under the contract shall be received by the Lead Partner on behalf of the Joint Venture as per power conferred to him in the Power of Attorney. The authorization shall be evidenced by submitting a Power of Attorney signed by legally authorized signatory of all the partners as per Performa in in Section-VI, Vol.-I of bidding documents. The payment under the Contract can also be received by other partner(s) based on authorization of Lead Partner.
(c) All partners of the joint venture shall be liable jointly and severally for the execution of the Contract in accordance with the Contract terms and a statement to this effect shall be included in the authorisation mentioned under (b) above as well as in the Bid Form and in the Contract Form (in case of a successful bid);
(d) Agreement entered into by the Joint Venture partners shall be submitted with the bid.
The bidder shall furnish documentary evidence in support of the qualifying requirement stipulated as above.
4.1 In accordance with the above, in case of JV bidders, it should be ensured that necessary details including those pertaining to each JV partner are furnished and the documents are submitted alongwith the bid. Further, the JV bidders should also ensure that other requirements are complied with. The lists of documents furnished are to be indicated below :
A For Name of the Bidder
6.0 The Bidder shall also furnish following documents/details with its bid. {Reference ITB clause 9.3 (c)}
6.1 The complete annual reports together with Audited statement of accounts of the company for last five years of its own (separate) immediately preceding the date of submission of bid.
Note I. In the event the bidder is not able to furnish the information of its own (i.e separate), being a subsidiary company and its accounts are being consolidated with its group/holding/parent company, the bidder should submit the audited balance sheets, income statements, other information pertaining to it only (not of its group/Holding/Parent Company) duly certified by any one of the authority [ (i) Statutory Auditor of the bidder /(ii) Company Secretary of the bidder or (iii) A certified Public Accountant] certifying that such information/documents are based on the audited accounts as the case may be.
II. Similarly, if the bidder happens to be a Group/Holding/Parent Company, the bidder should submit the above documents/information of its own (i.e. exclusive of its subsidiaries) duly certified by any one of the authority mentioned in Note-I above certifying that these information/documents are based on the audited accounts, as the case may be.
6.2 The Bidder should accordingly also provide the following information/documents
Audited balance sheet and income statements for the last five years as per the following:
A Years preceding to the bid opening Audited Balance Sheet and Income Statements enclosed
Date : -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-3(QR)
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(Qualifying Requirement Data)
Bidder’s Name and Address : To:
Contract Services
Name : 0 Power Grid Corporation of India Ltd.,
Address : 0 Western Region Transmission System-II
0 RHQ, Plot No 54 Vadodara-390008
For our Qualifying Requirements Data, please refer Schedule-QR of this volume.
Date : -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(Qualifying Requirement Data)
Bidder’s Name and Address : To:
Contract Services
Name: 0 Power Grid Corporation of India Ltd.,
Address: 0 Western Region Transmission System-II
0 RHQ, Plot No 54 Vadodara-390008
In support of the Qualification Requirements (QR) for bidders, stipulated in Annexure-A (BDS) of the Section - III (BDS), Volume-I & Additional Information required as per ITB clause 9.3(c) of the Bidding Documents, we furnish herewith our QR data/details along with other information, as follows herewith our stipulations have been reproduced in italics for ready reference, however, in case of any discrepancy the QR as given in BDS shall prevail).
* We have submitted bid as individual firm.
* We have submitted bid as joint venture of following firms :
(* Strike-off whichever is not applicable)
[For details regarding Qualification Requirements of a Joint Venture, please refer para 4.0 below.]
We are furnishing the following details/document in support of Qualifying requirement for the subject package.
A Attached copies of original documents defining :
a) The constitution or legal status;
b) The principal place of business;
c) The place of incorporation (for bidders who are corporations); or the place of registration and the nationality of the Owners (for applicants who are partnerships or individually-owned firms).
B Attached original & copies of the following documents :
a) Written power of attorney of the signatory of the Bid to commit the bidder.
b) Joint Venture Agreement.
1.0 GENERAL INFORMATION
Bidder is required to provide general information as per the following format.
[Where the Bidder proposes to use named subcontractor(s) for critical components of the works or for work contents in excess of ten (10) percent of the bid price, the following information should also be supplied for the subcontractor(s)].
S No. Particulars Name of the Bidder
1 Name of the Firm 0
2 Head Office/ Registered Office Address
5 Contact Person
6 Place of Incorporation/ Registration
7 Year of Incorporation/ Registration
8 Nationality of
9 Whether the bidder is an MSE (Micro & Small Enterprise). If Yes, attach Documentary Evidence with the Bid.
10 Whether the Bidder is a Start-Ups Company (as defined by DIPP). If Yes, attach Documentary evidence with the Bid.
2.0 TECHNICAL REQUIREMENTS {Reference para 1.1 of Annexure-A (BDS)}
2.1 TECHNICAL EXPERIENCE
2.1.1 1.1 Technical Experience (a) Bidder should have successfully completed execution of Any type of Building works for Govt. Or Semi Govt., OR reputed private sector organisations during preceding seven (07) years ending last day of the month previous to one in which bids are invited, of value not less than that specified below: i) Single similar completed work of a value of not less than ₹ 3.42 Crore OR ii) Two similar completed works, each of a value of not less than ₹ 2.14 Crore OR iii) Three similar completed works, each of a value of not less than ₹ 1.71 Crore. (b) Nature of Work: ‘Similar works’, for the package of “Construction of Residential Quarter D type (1 unit), B3 type (2 unit) and B1 type (6 unit) at 400/220kV Itarsi Substation” is defined as, “Any type of Building works”. (c) Following documents shall be submitted by the bidder as evidence of above: (i) Completion certificate (s) from the client for the work inter alia indicating final executed amount and date of completion or any other document authenticated by the client containing relevant information to conclusively establish that the bidder has completed the requisite works(s) as per the requirement specified above. (ii) The copy of corresponding work orders.
2.1.2 Using the following format, each Bidder is requested to list the experience as detailed above, on the basis of which the Bidder wishes to qualify. The information is to be summarised using following format for each experience of the Bidder
(The bidder shall attach documentary evidence, such as copies of utility certificates for completed contracts and copies of award letters etc. for ongoing contracts in support of his experience as listed in the following proforma for each Contract with the help of "Attach" Buttons provided in table given below).
Format for the Bidder in support of meeting the requirement of para 1.1.1, Annexure-A to BDS, Section-III, Volume-I of the Bidding Documents)
Bidder’s Name :
Details of Contract No.-1 Details of Contract No.-2 Details of Contract No.-3
1 Name of Contract Undertaken
2 Contract Reference No. & Date of Award
3 Name and Address of the Employer/Utility for whom the Contract was executed by the firm
4 Nature of the Building Works (institutional / commercial / Residential buildings)
5 Whether the Work executed as a Prime Contractor?
6 Total value of the Contract in INR Crores?
7 Completion Date of the above mentioned Work
8 Details of documents uploaded in support of the above stated experience
3.0 FINANCIAL REQUIREMENTS :
Financial Position {Reference para 1.2 of Annexure-A (BDS)}
(a) Minimum Average Annual Turnover (MAAT)* for the best three financial years out of last five financial years (i.e. 2018-19, 2019-20, 2020-21, 2021-22 & 2022-23) of the bidder shall be ₹ 6.41 Crore . * Note-Annual total income as incorporated in the profit & loss account except non-recurring income, i.e., sale of fixed assets (b) In case bidder is a holding company, MAAT referred to in (a) above shall be of that holding company only (i.e. excluding its subsidiary/group companies). In case bidder is a subsidiary of a holding company, MAAT referred to in (a) above shall be of that subsidiary company only (i.e. excluding its holding company/other companies in the group). Note: For MSE bidders relaxation of 20% on financial criteria of MAAT may be considered i.e. and MSE bidder meeting 80% of MAAT requirement for a particular package shall be considered qualified for award of the whole of package. (e) Following documents shall be submitted by the bidder as evidence of above : (i) Audited balance sheet and Profit and Loss Account of the best three (3) financial years out of the preceding five (5) financial years (i.e 2018-19, 2019-20, 2020-21, 2021-22 & 2022-23). In case, the audited balance sheet for latest financial year is not available, a certificate from the charted accountant on their letter head certifying the financial turnover for the latest financial year may be submitted. (ii) In case bidder is not covered under compulsory tax audit under the IT act for a particular financial year a copy of acknowledgement of income tax return filed for the corresponding period should also be submitted along with either certificate from charted accountant certifying the turn over or print out of form 26AS.
{In support of its ‘Financial Position’, in line with the above, the Bidder (in case of bidding by single firm ) or Company/Constituents must provide the relevant information in support of the same, along with documentary evidence, in the following format}
4.0 Financial Qualification Data:
Details of documentary evidence submitted in support of Qualification Data
Networth (in Rs. Millions)
Sl No Financial year
Do you have complete annual reports together with Audited statement of accounts of the company for FY 2021-22 (refer ITB Clause 9.3(c)) Yes
B Turnover details:
Details of documentary evidence submitted in support of Qualification Data
Turnover (in Rs. Millions)
Sl No Financial year
Do you have complete annual reports together with Audited statement of accounts of the company for FY 2021-22 (refer ITB Clause 9.3(c)) Yes
Average Annual Turnover for best Three Years is
C Liquid Assets
LA (in Rs. Millions) Details of documentary evidence submitted in support of Qualification Data
Details of evidence of having Liquid assets (LA)
Details of evidence of access to or availability of credit facilities
5.0 The Bidder shall also furnish following documents/details with its bid. {Reference ITB clause 9.3 (c)}
5.1 The complete annual reports together with Audited statement of accounts of the company for last five years of its own (separate) immediately preceding the date of submission of bid.
Note I. In the event the bidder is not able to furnish the information of its own (i.e separate), being a subsidiary company and its accounts are being consolidated with its group/holding/parent company, the bidder should submit the audited balance sheets, income statements, other information pertaining to it only (not of its group/Holding/Parent Company) duly certified by any one of the authority [ (i) Statutory Auditor of the bidder /(ii) Company Secretary of the bidder or (iii) A certified Public Accountant] certifying that such information/documents are based on the audited accounts as the case may be.
II. Similarly, if the bidder happens to be a Group/Holding/Parent Company, the bidder should submit the above documents/information of its own (i.e. exclusive of its subsidiaries) duly certified by any one of the authority mentioned in Note-I above certifying that these information/documents are based on the audited accounts, as the case may be.
5.2 The Bidder should accordingly also provide the following information/documents
Audited balance sheet and income statements for the last five years as per the following:
A Years preceding to the bid opening Audited Balance Sheet and Income Statements enclosed
Date : -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-4
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(Form of Certificate of Origin and Eligibility)
Bidder’s Name and Address : To:
Contract Services
Name : 0 Power Grid Corporation of India Ltd.,
Address : 0 Western Region Transmission System-II
0 RHQ, Plot No 54 Vadodara-390008
We hereby certify that equipment and materials to be supplied are produced in [Name of Countries], eligible source country. Equipments & Materials produced in [Name of countries] Company incorporated & registered in [Name of countries]
We hereby certify that our company is incorporated and registered in [Name of Countries], eligible source country. [Name of Countries] [Name of Countries] [Name of Countries], [Name of Countries],
Date : -- Printed Name :
Place : Designation :
country. country. [Name of Countries], [Name of Countries],
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-4(A)
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(List of Special Maintenance Tools & Tackles)
Bidder’s Name and Address : To:
Contract Services
Name : 0 Power Grid Corporation of India Ltd.,
Address : 0 Western Region Transmission System-II
0 RHQ, Plot No 54 Vadodara-390008
We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles are included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:
S.No. For Equipment Item Description Unit Quantity
Notwithstanding what is stated above, we further confirm that any additional special maintenance tools and tackles, required for the equipment under this package shall be furnished by us at no extra cost to the employer.
Date : -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-4(B)
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(List of Special Maintenance Tools & Tackles)
Bidder’s Name and Address : To:
Contract Services
Name : 0 Power Grid Corporation of India Ltd.,
Address : 0 Western Region Transmission System-II
0 RHQ, Plot No 54 Vadodara-390008
We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles which are to be taken back after the completion of the work by us are not included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:
Date : -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-5
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(Bought-out & Sub-contracted Items)
Bidder’s Name and Address : To:
Contract Services
Name : 0 Power Grid Corporation of India Ltd.,
Address : 0 Western Region Transmission System-II
0 RHQ, Plot No 54 Vadodara-390008
This Attachment is Not Applicable
We hereby furnish the details of the items/ sub-assemblies, we propose to buy for the purpose of furnishing and installation of the subject Package:
Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details / write-up to engage the Locals sub-contractor/sub-vendor
Name Nationality
We hereby declare that, we would not subcontract the erection portion of the contract without the prior approval of Employer.
We hereby furnish the details of the items/ sub-assemblies propose to supply from our own works (i.e. as direct transactions) in additional to the supplies the same from other vendors (i.e. as Bought-out transactions) as detailed in the table given above. In line with ITB Clause 9.3 (e), we intend to supply following items which are to be manufactured within Arunachal Pradesh. We further declare that we would source material / services for atleast 30% of the Installation Price of Services contract from within Assam
Sl. No. Item Description Quantity proposed to be supplied Details / write-up to engage the Locals sub-contractor/sub-vendor
Name of Plant Address
Date : -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Annexure I to Attachment-5
(Bought-out & Sub-contracted Items)
Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details / write-up to engage the Locals sub-contractor/sub-vendor
Name Nationality
Date : -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Annexure I to Attachment-5
(Bought-out & Sub-contracted Items)
Sl. No. Item Description Details of the proposed sub-contractor/sub-vendor Details / write-up to engage the Locals sub-contractor/sub-vendor
Name Nationality
Date : -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-5A
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(Items, Components, Raw Material, Services proposed to be sourced from Micro and Small Enterprises)
Bidder's Name and Address: To:
Contract Services
Name : 0 Power Grid Corporation of India Ltd.,
Address : 0 Western Region Transmission System-II
0 RHQ, Plot No 54 Vadodara-390008
Dear Sir, This Attachment is Not Applicable
1 We hereby furnish the details of the items, components, raw material, services which we propose to buy/avail from Micro and Small Enterprises (MSEs) for the purpose of completion of works under the subject package:
Sl. No. Item Description Quantity proposed to be bought/sub-contracted Name of Micro and Small Enterprises (MSEs)
Name Category (Micro or Small)
2 The above is a list of items we propose to procure from MSEs. However, based on the situations during the execution of the contract, the above list may undergo changes. We hereby confirm that the details regarding actual procurement from MSEs carried out by us, as per the format provided at Section VI, Forms and Procedures, Volume-I of bidding documents, shall be submitted along with the bills for payment against supplies made/works done during execution of contract.
We hereby furnish the details of the items/ sub-assemblies propose to supply from our own works (i.e. as direct transactions) in additiona to the supplies the same from other vendors (i.e. as Bought-out transactions) as detailed in the table given above.
Sl. No. Item Description Quantity proposed to be supplied Details of the plant from where supplies are proposed.
Name of Plant Address
Date : -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-5A
(Bought-out & Sub-contracted Items)
Sl. No. Item Description Quantity proposed to be bought/sub-contracted Name of Micro and Small Enterprises (MSEs)
Name Category (Micro or Small)
Date : -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-6
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(Alternative, Deviations and Exceptions to the Provisions)
Bidder’s Name and Address : To:
Contract Services
Name : 0 Power Grid Corporation of India Ltd.,
Address : 0 Western Region Transmission System-II
0 RHQ, Plot No 54 Vadodara-390008
The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:
Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation
The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.
Date : -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Annexure I toAttachment-6
(Alternative, Deviations and Exceptions to the Provisions)
Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation
Date : -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-7
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(Details of Alternative Bid)
Bidder’s Name and Address : To:
Contract Services
Name : 0 Power Grid Corporation of India Ltd.,
Address : 0 Western Region Transmission System-II
0 RHQ, Plot No 54 Vadodara-390008
This Attachment is Not Applicable
No Alternative Bid
Date : -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(Work Completion Schedule)
Bidder’s Name and Address : To:
Contract Services
Name : 0 Power Grid Corporation of India Ltd.,
Address : 0 Western Region Transmission System-II
0 RHQ, Plot No 54 Vadodara-390008
This Attachment is Not Applicable
We hereby declare that the following Work Completion Schedule shall be followed by us in furnishing and installation of the subject Package i.e., Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi for the period commencing from the effective date of Contract to us :
Sl. No. Description of Work Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
1 Detailed Engineering and drawing submission
a) commencement
2 Procurement of equipment/ components & assembly
a) commencement
a) commencement
3 Manufacturing
a) commencement
4 Shipments & Delivery
a) commencement
5 Establishment of site office
6 Installation at Site
a) commencement
7 Testing & Pre-commissioning
a) commencement
8 Trial Operation
a) commencement
Date : -- Printed Name :
Place : Designation :
Note : Bidders to enclose a detailed network covering all the activities to be undertaken for completion of the project indicating key dates for various milestones for each phase constituent-wise.
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-10
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(Guarantee Declaration)
Bidder’s Name and Address : To:
Contract Services
Name : 0 Power Grid Corporation of India Ltd.,
Address : 0 Western Region Transmission System-II
0 RHQ, Plot No 54 Vadodara-390008
Dear Sir, We conform that the equipments offerred shall have minimum performance specified in Technical Specification. We further guarantee the performance/efficiency of the equipments in response to the Technical Specifications.
Date -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-11
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(Information regarding Ex-employees of POWERGRID in our Organisation)
Bidder’s Name and Address : To:
Contract Services
Name : 0 Power Grid Corporation of India Ltd.,
Address : 0 Western Region Transmission System-II
0 RHQ, Plot No 54 Vadodara-390008
We declare that we are aware of and have gone through the “Code of Business Conduct and Ethics for Senior Management Personnel”1 and “Code of Business Conduct and Ethics for Board Members”1 of POWERGRID (hereinafter referred to as the “Code of Conduct”). We further understand that as per the “Code of Conduct”, Senior Management Personnel including Board Members, who have retired/resigned from POWERGRID, shall not accept any appointment or post, as detailed in the referred “Code of Conduct”, within 1 year from the date of cessation of service/directorship unless approved by the Competent Authority. Accordingly, we hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:
Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation*
*In case the date of joining in the bidder’s organization of such ex-employee is within 1 year from the date of retirement/resignation from POWERGRID, No Objection Certificate/ approval from the Competent Authority must be furnished along with the bid or subsequent through clarification pursuant to ITB Clause 21.
In case of non-submission of No Objection Certificate/approval of the Competent Authority, as required, We understand that POWERGRID shall deal with such cases as per its Policy and procedures in vogue, which may also result in rejection of our bid. We also confirm that POWERGRID shall be the sole judge in this regard. We further declare that any misrepresentation or submission of false/forged documents/information in this regard shall be dealt with as per the provisions of the Integrity Pact and/or the Bidding Documents and/or POWERGRID’s policy and procedures.
Date : -- Printed Name :
Place : Designation :
Note: 1. “Code of Business Conduct and Ethics for Senior Management Personnel” and “Code of Business Conduct and Ethics for Board Members” are available on POWERGRID’s website https://www.powergridindia.com. 2. The information in similar format should be furnished for each partner of joint venture in case of joint venture bid. 3. In case bidder has furnished no details on ex-employees of POWERGRID or has left blank or has indicated ‘-‘ against the same, it shall be deemed that they have not employed any such person in their organization.
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-11
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(Information regarding Ex-employees of POWERGRID in our Organisation)
Name(s) and Addresse(s) of other partner(s) To:
Contract Services
Name : Ram Lal Power Grid Corporation of India Ltd.,
Address : G5 Western Region Transmission System-II
Gurgaon RHQ, Plot No 54 Vadodara-390008
We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:
Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation
Date : -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-11
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(Information regarding Ex-employees of POWERGRID in our Organisation)
Name(s) and Addresse(s) of other partner(s) To:
Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : Western Region Transmission System-II
RHQ, Plot No 54 Vadodara-390008
We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:
Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation
Date : -- Printed Name :
Place : Designation :
Specification No.: WR2/NT/W-CIVIL/DOM/G01/23/08915 ATTACHMENT-12
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(Price Adjustment Data)
Bidder’s Name and Address (Sole Bidder) : To:
0 Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : Western Region Transmission System-II
RHQ, Plot No 54 Vadodara-390008
We have quoted our bid price on firm/fixed price basis
Sl. No. Name of Materials/Labour Value of co-efficient Name of the published index Value of index as 30 days prior to date set for opening of bids
In accordance with Clause 2, Appendix-2, Form of Contract Agreement, Section-VI; Forms. Volume-I
A) For Equipment Ex-Works Price Component
I. Circuit Breaker
a) Raw Material
b) Labour I= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
The sum of the value of coefficients for raw materials: a+b+c+d=0.55 to 0.65 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.
II Current Transformer
a) Raw Material
b) Labour I= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
The sum of the value of coefficients for raw materials: a+b+c+d=0.55 to 0.65 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.
a) Raw Material
b) Labour I= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
The sum of the value of coefficients for raw materials: a+b+c+d=0.65 to 0.73 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.
II Insulating Oil
S.N. Name of Materials/Labour Value of Coefficient Name of the published index Value of index as 30 days prior to date set for opening of bids
III Capacitive VoltageTransformer
a) Raw Material
b) Labour I= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
The sum of the value of coefficients for raw materials: a+b+c+d=0.55 to 0.65 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.
a) Raw Material
b) Labour I= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
The sum of the value of coefficients for raw materials: a+b+c+d=0.55 to 0.65 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.
IV Surge Arrester
a) Raw Material
b) Labour I= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
The sum of the value of coefficients for raw materials: a+b+c+d=0.55 to 0.65 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.
V PVC/XLPE Insulated Power and Control Cable
a) a=PVC Compound 0.15
b) Published Price of Metal IEEMA
i) Aluminium per MT IEEMA
ii) Copper per MT IEEMA
c) Weight in MT of Metal per kM (Size wise)
VI Substation Structures
i) Lattice Steel Structures & Pipe Structures (including bolts & nuts, washers & foundation bolts)
a) Raw Materials
i) a=Structural steel 0.58 JPC Market Price (Retail) for average Price of Steel Angles of size 50 x 50 x 6 mm of all cities in Rs./MT as published by Joint Plant Committee(JPC).
ii) b=Electrolytic Zinc 0.16 IEEMA
b) Labour 0.11 Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
VIII. Series Reactor [ 420 kV, 12 ohm, 2500A, 1-ph air core dry type Series Reactor]
a) Raw Material Copper(a)
i) Aluminium(a) Aluminium(a)
b) Labour I= 0.85 Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
The value of coefficient for raw materials: a=0.65 to 0.73 and value of coefficient for labour shall be between 0.12 and 0.20, so that sum of all the coefficients including labour shall be a+l=0.85
B. For Installation Price Component
I Installation price component (including Civil works but excluding ‘supply & placement of reinforcement steel’ and ‘concreting’)
i) Labour I= 0.80 Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
II Supply & Placement of Reinforcement Steel
i) HSD 0.10 Wholesale Price Index Number for `HSD’(Individual Commodity) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).
ii) Labour I= 0.05 Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
iii) Manufacture of Basic Metals 0.65 Wholesale Price Index Number for `Manufacture of Basic Metals’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).
III For Concereting
i) HSD 0.20 Wholesale Price Index Number for `HSD’(Individual Commodity) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).
ii) Labour I= 0.10 Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
iii) Manufacture of cement, lime and plaster 0.30 Wholesale Price Index Number for `Manufacture of cement, lime and plaster’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in)
iv) Cutting, shaping and finishing of stone 0.20 Wholesale Price Index Number for `Cutting, shaping and finishing of stone’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).
The Bidders are required to estimate and indicate the values of different coefficients for each of the items in the price variation formulae within the specified range such that their summation is as specified in the Bidding Documents. Where no value or ‘-’ or ‘shall be furnished later’ is specified against the coefficient, the same will be deemed to be zero and the fixed component would be suitably adjusted. If the values of all coefficients in price variation formulae indicated by the Bidder are within the specified range but their sum exceeds the summation specified in the Bidding Documents, the values of the coefficients shall be pro-rata adjusted such that the summation remains as per the provisions of the Bidding Documents. If the values of all coefficients indicated by the Bidder are within the specified range but their summation is less than the value specified in the Bidding Documents, the values of the coefficients as indicated by the Bidder shall be considered as such and the fixed component in the price variation formulae would be suitably adjusted. Further, if any of values of the coefficients indicated by the Bidder is out of the range specified in the Bidding Documents, the lower of the values, as indicated by the Bidder vis-à-vis lower value of the range for that coefficient specified in the Bidding Documents, shall be considered and the fixed component would be suitably adjusted.
Date : Printed Name : 0
Place : 0 Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 ATTACHMENT-12
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(Price Adjustment Data)
Bidder’s Name and Address (Sole Bidder) : To:
Contract Services
Name : 0 Power Grid Corporation of India Ltd.,
Address : 0 "Saudamini", Plot No.-2
0 Gurgaon (Haryana) - 122001
We hereby furnish the relevant details pertaining to the price adjustment provisions for equipment as specified in your specifications and documents for the subject package. The necessary documentary evidence is enclosed.
Sl. No. Name of Materials/Labour Value of co-efficient Name of the published index Value of index as 30 days prior to date set for opening of bids
In accordance with Clause 2, Appendix-2, Form of Contract Agreement, Section-VI; Forms. Volume-I
A. Price Adjustment for Erection Price Component
1 Erection price component {including Civil Works but excluding ‘Supply & Placement of reinforcement steel’ and ‘Concreting’}
i) High Speed Diesel, coefficient a = Wholesale Price Index Number for `HSD’ (Individual Commodity) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in)
ii) Labour, coefficient l = Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in)
Coefficient ‘a’ shall be between 0.20 to 0.24 and Coefficient ‘l’ shall be between 0.56 to 0.60 and sum of Coefficients ‘a’ and ‘l’ shall be 0.80
2 Supply and placement of reinforcement steel
i) HSD, a= Wholesale Price Index Number for `HSD’ (Individual Commodity) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in)
ii) Labour, l= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
iii) Manufacture of Basic Metals, b= Wholesale Price Index Number for `Manufacture of Basic Metals’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).
Coefficient ‘a’ shall be between 0.09 to 0.11, Coefficient ‘b’ shall be between 0.63 to 0.67 and coefficient ‘l’ shall be between 0.04 to 0.06 and sum of Coefficients ‘a’, ‘b’ and ‘l’ shall be 0.80
3 For Concereting
i) HSD, a= Wholesale Price Index Number for `HSD’(Individual Commodity) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in)
ii) Labour, l= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
iii) Manufacture of cement, lime and plaster, b= Wholesale Price Index Number for `Manufacture of cement, lime and plaster’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in)
iv) Cutting, shaping and finishing of stone, c= Wholesale Price Index Number for `Cutting, shaping and finishing of stone’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).
Coefficient ‘a’ shall be between 0.18 to 0.22, Coefficient ‘b’ shall be between 0.25 to 0.35, Coefficient ‘c’ shall be between 0.18 to 0.22 and Coefficient ‘l’ shall be between 0.09 to 0.11 and sum of Coefficients ‘a’, ‘b’, ‘c’ and ‘l’ shall be 0.80
The Bidders are required to estimate and indicate the values of different coefficients for each of the items in the price variation formulae within the specified range such that their summation is as specified in the Bidding Documents. Where no value or ‘-’ or ‘shall be furnished later’ is specified against the coefficient, the same will be deemed to be zero and the fixed component would be suitably adjusted. If the values of all coefficients in price variation formulae indicated by the Bidder are within the specified range but their sum exceeds the summation specified in the Bidding Documents, the values of the coefficients shall be pro-rata adjusted such that the summation remains as per the provisions of the Bidding Documents. If the values of all coefficients indicated by the Bidder are within the specified range but their summation is less than the value specified in the Bidding Documents, the values of the coefficients as indicated by the Bidder shall be considered as such and the fixed component in the price variation formulae would be suitably adjusted. Further, if any of values of the coefficients indicated by the Bidder is out of the range specified in the Bidding Documents, the lower of the values, as indicated by the Bidder vis-à-vis lower value of the range for that coefficient specified in the Bidding Documents, shall be considered and the fixed component would be suitably adjusted.
Date : -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-13
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(Declaration regarding Social Accountability)
Bidder’s Name and Address : To:
Contract Services
Name : 0 Power Grid Corporation of India Ltd.,
Address : 0 Western Region Transmission System-II
0 RHQ, Plot No 54 Vadodara-390008
We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.
Date : -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-14
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
Bidder’s Name and Address : To:
Contract Services
Name : 0 Power Grid Corporation of India Ltd.,
Address : 0 Western Region Transmission System-II
0 RHQ, Plot No 54 Vadodara-390008
Integrity Pact is annexed herewith this Volume.
Date : -- Printed Name :
Place : Designation :
Instruction for printing & submitting Integrity Pact
1. The requisite format of Integrity Pact is getting generated automatically and displayed here below.
2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.
3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.
4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.
5. For further details bidders may please refer ITB Clause 9.3 (o).
Power Grid Corporation of India Limited
having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai,New Delhi – 110016 hereinafter referred to as
having its Registered Office at 0 0 0
hereinafter referred to as
"The Bidder/Contractor"
POWERGRID intends to award, under laid-down organisational procedures, contract(s) for Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Integrity Pact Page 1 of 8
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi and Specification Number WR2/NT/W-CIVIL/DOM/G01/23/08915. POWERGRID values full compliance with all relevant laws of the land, rules, regulations, economic use of resources, and of fairness/transparency in its relations with its Bidders/ Contractors.
In order to achieve these goals, POWERGRID and the above named Bidder/Contractor enter into this agreement called 'Integrity Pact' which will form a part of the bid.
It is hereby agreed by and between the parties as under:
Section I - Commitments of POWERGRID
(1) POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :
a) No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.
b) POWERGRID will, during the tender process treat all Bidder(s) with equity, fairness and reason. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.
c) POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personal interest in the Companies/Agencies participating in the Bidding/Tendering process and all known prejudiced persons.
(2) If POWERGRID obtains information on the conduct of any of its employee which is a criminal offence under the IPC/PC Act, or if there be a substantive suspicion in this regard, POWERGRID will inform its Chief Vigilance Officer and in addition disciplinary actions can be initiated under POWERGRID's Rules.
Section II - Commitments of the Bidder/Contractor
(1) The Bidder/Contractor commits itself to take all measures necessary to prevent corruption. The Bidder/Contractor commits itself to observe the following principles during its participation in the tender process and during the contract execution :
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Integrity Pact Page 2 of 8
a) The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which it is not legally entitled to, in order to obtain in exchange an advantage of any kind whatsoever during the tender process or the execution of the contract.
b) The Bidder/Contractor will not enter into any illegal or undisclosed agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.
c) The Bidder/Contractor shall not pass any information provided by POWERGRID as part of business relationship to others and shall not commit any offence under PC/IPC Act.
d) The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.
e) The Bidder/Contractor will, when presenting his bid, disclose any and all payments made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.
f) The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/informations in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.
g) The Bidder/Contractor shall ensure adoption of Integrity Pact by its Sub-contractors and shall be responsible for the same.
(2) The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Integrity Pact Page 3 of 8
Section III- Disqualification from tender process and exclusion from future contracts
(1) If the Bidder, before contract award, has committed a transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.
(2) If the Bidder/Contractor has committed a transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may, after following due procedures, ban/blacklist the Bidder/Contractor in line with POWERGRID's policy for "Black-Listing of Firms/Banning of Business". The imposition and duration of the ban will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the postion of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The ban will be imposed for a maximum of 3 years.
(3) If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the ban prematurely.
Section IV - Liability for violation of Integrity Pact
(1) If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID is entitled for the forfeiture of the Bid Guarantee under the Bid.
(2) If POWERGRID has terminated the contract under Section III or if POWERGRID is entitled to terminate the contract under Section III, POWERGRID shall be entitled to forfeit the Contract Performance Guarantee of this contract, in full or part thereof as may be decided, besides resorting to other remedies under the contract.
Section V- Previous Transgression
(1) The Bidder shall disclose in its Bid any transgressions occurred in the last 10 years with any other Public Sector Undertaking or Government Department or any other Company, in any country, that may impinge on the Anti-corruption principle.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Integrity Pact Page 4 of 8
(2) If the Bidder makes incorrect statement on this subject, it can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason and further action can be taken in line with POWERGRID's policies.
Section VI - Equal treatment to all Bidders / Contractors
(1) POWERGRID will enter into agreements with identical conditions as this one with all Bidders.
(2) POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.
Section VII - Punitive Action against violating Bidders / Contractors
If POWERGRID obtains knowledge of conduct of a Bidder or a Contractor or its subcontractor or of an employee or a representative or an associate of a Bidder or Contractor or his Subcontractor which constitutes corruption, or if POWERGRID has substantive suspicion in this regard, POWERGRID will inform the Chief Vigilance Officer (CVO).
(*)Section VIII - Independent External Monitor/Monitors
(1) POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India. The names of the IEMs have been indicated in the Bidding Documents.
(2) The panel of IEMs shall review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. The panel of IEMs has right of access to all project documentation. The panel of IEMs may examine any complaint received by them and submit a report to Chairman-cum-Managing Director, POWERGRID, giving joint findings, at the earliest. The panel of IEMs may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Integrity Pact Page 5 of 8
(3) The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He/She reports to the Chairman-cum-Managing Director, POWERGRID.
(4) The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his/her request and demonstration of a valid interest, unrestricted and unconditional access to their documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.
(5) POWERGRID will provide to the IEMs information as sought by him/her which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract. The IEMs shall also sign declaration on 'Non-Disclosure of Confidential Information' and of 'Absence of Conflict of Interest'. In case of any conflict of interest arising at a later date, the IEM shall inform Chairman-cum-Managing Director, POWERGRID and rescue himself/herself from that case
(6) As soon as the IEM notices, or believes to notice, a violation of this agreement, he/she will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.
(7) The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.
(8) If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under PC/IPC Act, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Integrity Pact Page 6 of 8
(9) While representing any matter in relation to the Integrity pact inter-alia including its transgression to the panel of IEMs, POWERGRID and Bidder/Contractor shall not approach the court of law and await the decision of the IEM in the matter.
(10) The word ‘IEM’ would include both singular and plural.
(*) This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.
Section IX - Pact Duration
This Pact begins when both parties have legally signed it. It expires for the Contractor after the closure of the contract and for all other Bidder's six month after the contract has been awarded.
Section X - Other Provisions
(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.
(2) Changes and supplements as well as termination notices need to be made in writing. Side agreements have not been made.
(3) If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.
(4) Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).
(5) Issues like Warranty/Guarantees etc. shall be outside the purview of IEMs.
(6) Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral or judicial proceedings (arising out of the arbitral proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.
# CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Integrity Pact Page 7 of 8
(7) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.
Signature Signature
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
(Office Seal) (Office Seal)
Designation : Designation :
Witness 1 : Witness 1 :
Designation : Designation :
Witness 2 : Witness 2 :
Designation : Designation :
Integrity Pact Page 8 of 8
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-15
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise
Bidder’s Name and Address : To:
Contract Services
Name : 0 Power Grid Corporation of India Ltd.,
Address : 0 Western Region Transmission System-II
0 RHQ, Plot No 54 Vadodara-390008
I We have read the provisions in the Bidding Documents regarding furnishing the option for advance payment. Accordingly, as per ITB Clause 9.3 as provided in Section BDS, Section III, Vol.-I of the Bidding Documents, we hereby confirm to opt the following:
Interest Bearing Initial Advance
Supply Portion:
Services Portion:
I We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.
1. Name of the Supplier/ Contractor in whose favour payment is to be made 0
2. Address with PIN Code and State
Registered Office:
Correspondence Address:
3. (a) Status – Company/others
[Declaration of Micro/ Small/ Medium Enterprise under Micro/ Small & Medium Enterprises Development Act 2006, if applicable]
3. (b) Are you a MSE owned by SC/ST* entrepreneurs in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012 including subsequent amendment/notification/order (Indicate Yes/No) Note: Documentary evidence is to be attached. Please refer remarks at the end of the attachment. No
3. (c ) If 3(b) is ‘Yes’ please mention whether you are (Proprietary MSE/ Partnership MSE/ Private Limited Company) owned by SC/ST entrepreneurs
3. (d ) Are you a MSE owned by women in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012, Public Procurement Policy for Micro and Small Enterprises (MSEs) Amendment order 2018 including subsequent amendment/notification/order (Indicate Yes/No) Note: Documentary evidence is to be attached.
4. Permanent Account (PAN) No.
5. GSTIN Numbers
I. GSTIN in the Sates/UT from where the supply of goods take place
Name of the States/UT GSTIN number
II. GSTIN in the States/UT where the supply for services take place (states where sites under the subject package is situated)
Name of the States/UT GSTIN number
6 PF Registration No. of the Company
7 PF Regional Office covered (with Address)
8 Name of Contact Person
9 Contact Details
10 Bank Details for Electronic Payment
Name of the Bank:
Address of Branch:
Type of Account:
Type of Account: Current Account
11 9 digit MICR code printed at bottom in middle, next to cheque no.
12 IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed
We hereby declare that the above information are true and correct and we agree that the payment on account of this Contract, in the event of award, be made in the above account maintained in the above mentioned Bank.
*The definition of MSEs owned by SC/ST is as given under:
a. In case of proprietary MSE, proprietor(s) shall be SC /ST.
b. In case of partnership MSE, the SC/ST partners shall be holding at least 51% shares in the unit.
c. In case of Private Limited companies, at least 51% share shall be held by SC/ST promoters.
Documentary evidence: Please provide scanned copy(ies) of the SC/ST certificate(s) issued by District Authority as applicable for SC/ST MSE category as per (a), (b) or (c) above.
Date : -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-16
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(Additional Information)
Bidder’s Name and Address : To:
Contract Services
Name : 0 Power Grid Corporation of India Ltd.,
Address : 0 Western Region Transmission System-II
0 RHQ, Plot No 54 Vadodara-390008
In support of the additional information required as per ITB Sub-Clause 9.3 (q) of the Bidding Documents, we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):
1.0 The Bidder shall furnish
A certificate from their Banker(s) (as per prescribed formats in Form 16, Section-VI: Sample Forms and Procedures) indicating various fund based/non fund based limits sanctioned to the Bidder and the extent of utilization as on date. Such certificate should have been issued not earlier than three months prior to the date of bid opening. Wherever necessary the Employer may make queries with the Bidders’ Bankers. [Reference ITB clause 9.3(q)(i)]
1.1 In accordance with 1.0, certificate(s) from banker as per requisite format, indicating various fund based/non fund based limits sanctioned to the bidder or each member of the joint venture and the extent of utilization as on date is/are enclosed, as per the following details:
Name of the Bidder (Sole Bidder) 0
Name of the Banker by whom certificate issued
Date of certificate (should not be earlier than 3 months prior to date of bid opening)
Whether fund based/non fund based limits are indicated in the certificate
Whether extent of utilization is indicated in the certificate
1.2 The Bidder should accordingly also provide the following information/documents
(i) Details of Banker:
Address of Banker
Contact Name and Title
(ii) As per para 1.0, Authorization Letter(s) from the bidder (in case of JV bidder, from all the partners) addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/are enclosed as per following details:
Sl. No. Letter Ref. Date Addressed to (name of the Bank)
(iii) As per para BDS/ITB clause 9.3q, Bidder shall furnish the details of their Provident Fund Code Number
Sl. No. Name of Bidders/JV Partners Provident Fund Code Number Details
2.0 Litigation History
The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder or any partner of JV may result in rejection of Bid. [Reference ITB clause 9.3(q)(ii)]
2.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years
Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount
3.0 Details regarding previous transgressions of Integrity Pact
The bidder should provide detailed information on any transgression of Integrity Pact that occurred in the last 10 years with any other Public Sector Undertaking or Government Department or any other Company, in any country.
3.1 Details regarding previous transgressions of Integrity Pact that occurred in the last 10 years
Year Name of client Details of Transgression of Integrity Pact by the bidder
4.0 OTHER INFORMATION
4.1 Current Contract Commitments of works in progress
Bidders (individual firms or each partners of JV) should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.
Details of Contract Value of outstanding work (Rs.) Estimated completion date
4.2 Financial Data:
Details Actual (Previous five years) Projection for next five years
Total Liability
Current Liability
Profit before taxes
Profit after taxes
Date : -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-17
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(Declaration for tax exemptions, reductions, allowances or benefits)
Bidder’s Name and Address : To:
Contract Services
Name : 0 Power Grid Corporation of India Ltd.,
Address : 0 Western Region Transmission System-II
0 RHQ, Plot No 54 Vadodara-390008
1 We confirm that we are solely responsible for obtaining following tax exemptions, reductions, allowances or benefits in respect of supplies under the subject package, in case of award. We further confirm that we have considered the same in our bid thereby passing on the benefit to POWERGRID while quoting our prices. In case of our failure to receive such benefits, partly or fully, for any reason whatsoever, the Employer will not compensate us.
2 We are furnishing the following information required by the Employer for issue of requisite certificate if and as permitted in terms of the applicable Govt. of India policies/procedures (in case of award):
Applicable Act, Notification No. and Clause Ref. No. Sl. No. Description of item on which applicable Country of origin Remarks, if any
(The requirements listed above are as per current Notification of Govt. of India indicated above. These may be modified, if necessary, in terms of the Notifications.)
Date : -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-17
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(Information regarding Ex-employees of POWERGRID in our Organisation)
Name(s) and Addresse(s) of other partner(s) To:
Contract Services
Name : …… ……. …….. …… ……. …….. Power Grid Corporation of India Ltd.,
Address : …… ……. …….. …… ……. …….. Western Region Transmission System-II
…… ……. …….. …… ……. …….. RHQ, Plot No 54 Vadodara-390008
We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:
Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation
Date : -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-17
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
(Information regarding Ex-employees of POWERGRID in our Organisation)
Name(s) and Addresse(s) of other partner(s) To:
Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : Western Region Transmission System-II
RHQ, Plot No 54 Vadodara-390008
We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:
Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation
Date : -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Attachment-19
Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi
Bidder’s Name and Address : To:
Contract Services
Name : 0 Power Grid Corporation of India Ltd.,
Address : 0 Western Region Transmission System-II
0 RHQ, Plot No 54 Vadodara-390008
Further, we hereby confirm that except as mentioned in the Attachment – 6 (Alternative, Deviations and Exceptions to the Provisions) hereof forming part of our First Envelope :
Date : -- Printed Name :
Place : Designation :
Specification No. :WR2/NT/W-CIVIL/DOM/G01/23/08915 Bid Form 1st Envelope 1 one 1 st 1 January
2 two 2 nd 2 February
BID FORM (First Envelope) 3 three 3 rd 3 March
4 four 4 th 4 April
Bid Proposal Ref. No. 5 five 5 th 5 May
Date : -- 6 six 6 th #VALUE! 6 June
7 seven 7 th #VALUE! 7 July
To: 8 eight 8 th #VALUE! 8 August
Contract Services 9 nine 9 th #VALUE! 9 September
Power Grid Corporation of India Ltd., 10 ten 10 th 10 October
Western Region Transmission System-II 11 eleven 11 th 11 November
RHQ, Plot No 54 Vadodara-390008 12 twelve 12 th 12 December
13 thirteen 13 th
14 fourteen 14 th
Name of Contract : Construction of Residential Quarters (D type - 1 unit, B3 type - 2 units and B1 type - 6 units) at 400/220 kV substation of POWERGRID at Itarsi 15 fifteen 15 th
Dear Ladies and/or Gentlemen, Enter details here. 16 sixteen 16 th
1.0 Having examined the Bidding Documents, including Amendment Nos. dated …[Enter the Date in dd-mm-yyyy]… the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). …[Enter the Date in dd-mm-yyyy]… the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). 17 seventeen 17 th
1.1 We meet the eligibility requirements and have no conflict of interest in accordance with ITB Clause 2.
2.0 Attachments to the Bid Form (First Envelope) Bank Draft 18 eighteen 18 th
In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments: Pay Order 19 nineteen 19 th
(a) Attachment 1(CIVIL Works Package) : BID SECURITY FORM in Volume I Annexure E (BDS) Banks certified Cheque Zero 20 twenty 20 th
or documentary evidence in support of exemption of Bid Security, in separate envelope in accordance with clause 21 of ITB, Section-II." Please note that if bid validity is less than 250 days, your bid may be rejected
(b) Attachment 2(CIVIL Works Package) : A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 14. Bank Guarantee (0) 21 st
*Further the requisite deed of Joint Undertaking as per stipulated qualification requirement in Annexure-A (BDS) has also been furnished as per your format.
* Delete if not applicable
(c) Attachment 3(CIVIL Works Package) : The documentary evidence that we are eligible to bid in accordance with ITB Clause 2. Further, in terms of ITB Clause 9.3(c) & (e), the qualification data has been furnished as per your format enclosed with the bidding documents [Attachment – 3(QR)]. 22 th
Further, the required Joint Venture Agreement signed by us and our Partners has also been furnished as per your format Attachment-3(JV). #REF! Applicable 23 th
Further the required deed of Joint Undertaking signed by us and Tower Manufacturer has also been furnished as per your format. 0 #REF! Not Applicable 24 th
(d) Attachment 4(CIVIL Works Package) : The documentary evidence establishing in accordance with ITB Clause 3, Vol.-I of the Bidding Documents that the facilities offered by us are eligible facilities and conform to the Bidding Documents has been furnished as Attachment 4. A list of Special Tools & Tackles to be used by us for erection, testing & Commissioning and to be handed over to Employer, the cost of which is included is our Bid Price, is also enclosed as per your format as Attachment 4A. A list of Special Tools & Tackles to be brought by the contractor for erection, testing & Commissioning and to be taken back after completion of work, whose cost in not included in our bid price, is enclosed as per your format as Attachment 4B. 25 th
(e) Attachment 5(CIVIL Works Package) : NA 26 th
(f) Attachment 5A(CIVIL Works Package) : NA 26 th
(g) Attachment 6(CIVIL Works Package) : The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings (excluding critical provisions as mentioned at clause 6.0 below) in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein. 27 th
(h) Attachment 7(CIVIL Works Package) : NA 28 th
(i) Attachment 8(CIVIL Works Package) : NA 29 th
(j) Attachment 9(CIVIL Works Package) : NA 30 th
(k) Attachment 10(CIVIL Works Package) : Guarantee Declaration. 31 st
(l) Attachment 11(CIVIL Works Package) : Information regarding ex-employees of Employer in our firm.
(m) Attachment 12(CIVIL Works Package) : Filled up information regarding Price Adjustment Data as per the format enclosed in the bidding documents.
(n) Attachment 13(CIVIL Works Package) : Declaration regarding Social Accountability.
(o) Attachment 14(CIVIL Works Package) : Integrity Pact, in a separate envelope, duly signed on each page by the person signing the bid.
(p) Attachment 15(CIVIL Works Package) : Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise
(q) Attachment 16(CIVIL Works Package) : Additional Information.
(r) Attachment 17(CIVIL Works Package) : Declaration for tax exemptions, reductions, allowances or benefits
(s) Attachment 18(CIVIL Works Package) : NA
(t) Attachment 19(CIVIL Works Package) : Declaration.
(u) Attachment 20(CIVIL Works Package) : Declaration of Key Managerial Person jointly with Power of Attorney holder
(v) Attachment 21(CIVIL Works Package) : Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII order and MoP Order, if applicable
(w) Attachment 22(CIVIL Works Package) : NA
(x) Attachment 23(CIVIL Works Package) : NA
(y) Attachment 24(CIVIL Works Package) : NA
(z) Attachment 25(CIVIL Works Package) : Compliance to the process related to the e-RA Terms & Conditions and the Business Rules governing the e-RA
(aa) Attachment 26(CIVIL Works Package) : Declaration by the Bidder regarding events encountered pursuant to ITB Clause 2.1
(ab) Attachment 27(CIVIL Works Package) : Certification by the Bidder per DoE Order in line with ITB Clause 2.1
(ac) Attachment 28(CIVIL Works Package) : NA
3.0 We are aware that, in line with Clause No. 27.1 (ITB), our Second Envelope (Price Part) is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in this First Envelope.
4.0 We confirm that except as otherwise specifically provided our Bid Prices in Second Envelope include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.
4.1 100% of applicable Taxes and Duties i.e. GST, which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.
4.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.
5.0 Construction of the Contract
5.1 We declare that we have studied Clause GCC 2.1 relating to mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us two separate Contracts viz ‘First Contract’ for ex-works supply of all equipment and materials including mandatory spares and ‘Second Contract’ for providing all the services i.e. inland transportation for delivery at site, In-transit insurance, unloading, handling at site, installation, testing and commissioning including Trial operation in respect of all the equipment supplied under the ‘First Contract’ and other services specified in the Contract Documents. We declare that the award of two contracts, will not, in any way, dilute our responsibility for successful operation of plant/equipment and fulfillment of all obligations as per Bidding Documents and that both the Contracts will have a cross-fall breach clause i.e. a breach in one Contract will automatically be classified as a breach of the other contract which will confer on you the right to terminate the other contract at our risk and cost.
6.0 We have read the provisions of following clauses and confirm that the specified stipulations of these clauses are acceptable to us:
(a) ITB 13 Bid Security
(b) GCC 2.14 Governing Law
(c) GCC 5.1 Contractor’s Responsibilities
(d) Appendix I to SCC Terms of Payment
(e) GCC 8.3 Performance Security
(f) GCC 6 Taxes and Duties
(g) GCC 40 Defect Liability
(h) GCC 59 Arbitration
(i) Appendix 2 to SCC Price Adjustment
Further we understand that deviation taken in any of the above clauses by us may make our bid non-responsive as per provision of bidding documents and be rejected by you.
7.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification of Award to us, and to achieve the delivery of goods and related services within the time stated in the Bidding Documents.
8.0 If our bid is accepted, we undertake to provide a Performance Security in the form and amounts, and within the times specified in the Bidding Documents.
9.0 We agree to abide by this bid for a period of six (06) months from the date fixed for opening of bids as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period.
10.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.
11.0 We understand that you are not bound to accept the lowest or any bid you may receive.
12.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions. 2
13.0 We are a Micro and Small Enterprise (MSE) registered with , a designated Authority of GoI under the Public Procurement Policy for MSEs order 2012, Notification dated 01/06/2020 and 26/06/2020 read in conjuction with related notifications issued from time to time for such enterprises. 2
14.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.
Thanking you, we remain,
Yours faithfully,
For and on behalf of 0
Date : -- Printed Name :
Place : Designation :
In case of bid from a Joint Venture, name & designation of representative of JV partner is to be provided and Bid Form is also to be signed by him
#REF! Printed Name :
#REF! Designation :
Please provide additional information of the Bidder
Business Address :
Country of Incorporation :
State/Province to be indicated :
Name of Principal Officer :
Address of Principal Officer :
23 Twenty Three
27 Twenty Seven
28 Twenty Eight
33 Thirty Three
37 Thirty Seven
38 Thirty Eight
73 Seventy Three
74 Seventy Four
75 Seventy Five
77 Seventy Seven
78 Seventy Eight
79 Seventy Nine
83 Eighty Three
87 Eighty Seven
88 Eighty Eight
93 Ninety Three
97 Ninety Seven
98 Ninety Eight
100 One Hundred
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html
Price_Schedule.xlsx
xlsx • 0.80 MB
Attachment-20_KMP Declaration.docx
docx • 0.02 MB
Attachment-21_Affidavit for Self-Certification-PPP-MII.docx
docx • 0.03 MB
Attachment-22-Certificate by Auditor.docx
docx • 0.02 MB
Attachment-23- Undertaking by the bidder regarding Compliance of DMI&SP policy.docx
docx • 0.02 MB
Attachment-24-Affidavit for Self Certifictaion-Iron & Steel.docx
docx • 0.02 MB
Attachment-25_Compliance to the process related to the e-RA.docx
docx • 0.02 MB
Attachment-26_Declaration regarding events encountered pursuant to ITB Clause 2.1.docx
docx • 0.03 MB
Attachment-27- Certificate by Bidder_land border.docx
docx • 0.02 MB
First_Envelope_and_Bid_Forms.xlsx
xlsx • 1.65 MB
Annexure E Standard Field Quality Plan Civil Works for Site Packages Revision 04.pdf
pdf • 2.19 MB
Annexure F - Approved List of Makes.pdf
pdf • 0.32 MB
Annexure G Technical specification Electrical.doc
doc • 0.14 MB
ARCHITECTURAL- TYPE-B-1.pdf
pdf • 0.75 MB
ARCHITECTURAL- TYPE-B-3.pdf
pdf • 0.79 MB
ARCHITECTURAL- TYPE-D.pdf
pdf • 0.76 MB
Scope of work for Itarsi Quarter.doc
doc • 0.08 MB
TS for Civil work for Itarsi quarter.doc
doc • 0.08 MB
Annexure -A QR (BDS).pdf
pdf • 0.15 MB
Annexure- B ERA (BDS).docx
docx • 0.02 MB
Annexure -C(BDS)_non divisible.docx
docx • 0.02 MB
Annexure -D (BDS) e-Reverse Auction - Bidder Manual.pdf
pdf • 2.00 MB
Annexure -E EMD format (BDS ).doc
doc • 0.07 MB
Section - I Invitation for Bids (IFB).pdf
pdf • 0.18 MB
Section - II ITB.pdf
pdf • 0.37 MB
Section - III BDS.pdf
pdf • 0.17 MB
Section - IV GCC.pdf
pdf • 0.53 MB
Section - V Special Conditions of Contract (SCC).pdf
pdf • 0.10 MB
Section - VI Appendix to SCC.pdf
pdf • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .