GER-03/2021-22 REPAIR/REPLACEMENT OF BOUNDARY WALLS FENCING GATES AND RETAINING WALLS OF ZONE A UNDER AOR OF AGE B/R DETT B

Amount

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks,(except bricks, using old unserviceable brick after cleaning), old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for stone walling of random rubble masonry, uncoursed, well bonded, bedded and soilidly hearted, built in cement mortar (1:6), complete all as specified and directed.

M&L for stone walling of random rubble masonry (except stones, using old unserviceable stone after cleaning), uncoursed, well bonded, bedded and soilidly hearted, built in cement mortar (1:6), complete all as specified and directed.

M&L for extra over stone walling of any type of stone for hammer dressing to face stones and dressing of face beds with maximum depression on face from straight edge held against the dressed surface n exc 20 mm and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed.

M&L for PCC type B-1, 1:2:4 (using 20mm graded aggregate) as in coping, benching, hold fast, water troughs, bed block and the like including weathering, slightly rounded or chamfered angle and throating including necessary form work complete all as specified and directed

M&L for PCC type D-2 (1:4:8), (using 40 mm graded stone aggregates) in foundation, filling and mass concrete complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surface of concrete complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 5mm to 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends as in stirrups, spacers and binders including binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for demolition of cement concrete of any description and in any position not otherwise specifically provided for as in louvers, jallied complete all as specified and directed.

M&L for 25mm thick precast cement concrete louvers and jallies 1:2:4 type B-0 (using 12.5 mm graded stone aggregate ) set in cement mortar (1:4) including all moulding but exc frames complete all specified and directed. Note- Pattern of jallies shall be as approved by GE.

M&L for reinforced cement concrete M-25 (design mix) (20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns and the like complete all as specified and directed

M&L for reinforced cement concrete M-25 (design mix) (20mm graded stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like complete all as specified and directed

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on concrete/brick surface on wall in cement mortar (1:4), finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 20 mm thick on stone surface on wall in cement mortar (1:4), finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over and including a coat of alkali resistand primer complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed by GE.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground as post embedded in concrete, brick work, masonry work etc complete all as specified and directed.

Dismantling of old unserviceable steel barbed wire fencing any type complete neatly all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to a distance n exc 50m and making good surface in any type of soil complete all as specified and directed.

S&F for angle iron posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. Note :- Size of angle shall be as per standard drgs.

All as per item No 24 here-in-before but fixing only (obtained from item No 21 above) complete all as specified and directed.

M&L for 12mm bolts and nuts (machine made) with hexagonal or square head at one end and screwed the other with washers of length exc 10 cm and n exc 15 cm after taking down of old nuts and bolts complete all as specified and directed.

S&F for mild steel round bars 10mm dia for securing chainlink fencing etc fixed to fencing posts complete all as specified and directed by Engineer-in-Charge as per Fe-410S or O after taking down old unserviceable round bars.

M&L for PCC type C2 (1:3:6), using 40 mm graded stone aggregates as in sub base, foundation filling and mass concrete complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling of chainlink fencing of any type complete all as specified and directed.

Demolition of reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground) complete all as specified and directed.

S&F for galvanised iron chain link fencing with 3.8mm to 4mm dia wire mesh size 100mm X 100mm (as per sample approved by GE) complete all as specified and directed.

S&F for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line of wire to be measured) complete all as specified and directed.

S&F concertina coil 1050 mm dia, 56 loops, 2.5mm core wire heavy galvanised (wire-275 GSM & strip-200 GSM), tensile strength of wire 1400-1500 N/Sqmm, weight 14.63 Kg/coil, stretchable length 12M inlcuding securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc after dismantling of old concertina coil of any type complete all as specified and directed.

Rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and also fastening conforming to Fe-290 Gde E-165 after taking down of old mild steel frame work of any type and any locations complete all as specified and directed.

Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.

M/S BADRI NATH GUPTA

M/S Jyoti Parkash Tilak Raj Gupta

NATIONAL TRADING COMPANY

M/S SV CONSTRUCTIONS

aamir farooq bhat

M/s Liaqat Hussain Construction Company