SPECIAL REPAIRS OF BUILDING NO T175 AND 181 AT 172 TA INFANTRY BATTALION MADRAS BRICHGUNJ MILITARY STATION UNDER GE BRICHGUNJ PORT BLAIR

Amount

Dismantling for corrugated steel sheeting, any gauge, thickness,including Removing L-type or J-type bolts in Roof Covering complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Taking down chowkat with shutter without taking off shutters from the frame nexc 1.5 Sqm complete all as specified and as directed.

Taking down chowkat with shutter without taking off shutters from the frame exc 1.5Sqm but nexc 4sqm complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed.

Demolition of PCC Block walling built in CM 1:6 complete all as specified and as directed

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specified complete all as directed.(plinthprotection)

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets Including frame of any description and any thickness, fixed in any position .

S&F steel work in tubular for columns,roof truss,purlins,rafters and battens etc incl special shaped washer etc complete using ERW or induction but welded tube conforming to IS : 1161-1979 Gde St-240 completely providing in any curvature and as of any shape etc complete all as specified and as directed by Engineer in Charge.

M&L for Plates (Plain or Chequered) channels, square or notched (Ordinary and counter sunk) forming holes, without any attachment of Fe 290 (Gde E-165) completely all as specified and as directed by Engineer in Charge.

M&L precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C1 using 20mm graded stone aggregates, exc. 10cm in width and set in CM 1:6 complete all as specified and directed.

M&L Rendering 10mm thick on concrete surfaces in CM (1:6) finished even & smooth without using extra cement complete all as specified and as directed.

M/L 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as in flooring finished fair and even without using extra cement complete all as specified and as directed.

M&L for 75mm thick Cement concrete in C1 type (1:3:6) using 20mm graded stone aggregate as in plinth protection and finished even and smooth with using extra cement complete all as specified and as directed.

M&L non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm and not exceeding 0.38 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over 15mm thick screed bed in CM 1:4 complete all as specified and as directed

All as per item No 15.00 here in before, but on vertical surfaces incl 10mm thick CM 1:3 as in baking coat of dado/skirting complete all as specified and as directed

S & F Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangement etc, complete with standard aluminium sections, all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply only 4.0mm thick Sheet glass ordinary quality and glazing with oil putty in Square n.exc 0.5sqm in each panel complete all as specified and as directed.

Supply only 4.0mm thick Sheet glass ordinary quality and glazing with oil putty in Square exc 0.5sqm in each panel complete all as specified and as directed.

Supply only 12 mm thick pre-laminated particle board, exterior grade, Pre-laminated on both side with decorative choice lamination fixed with aluminium beeding as in door panel complete all as specified and as directed .

S&F aluminium fly proof mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm and fiexed with aluminium straps complete incl taking down and complete all as specified and as directed.

S&F Aluminium Die cast Body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed

S&F Butt hinges, 100mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and directed by Engineer-in-Charge.

S& F Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips of sheet cast or extruded sections and fixing bolt or cast aluminium alloy& fixed complete .

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed.

S&F 150mm long extruded aluminium alloy anodised handles fabricated type, anodised complete all as specified and as directed.

M&L for oil bound distempering two coats including complete removal of old decorated, plastered or unplastered surfaces of wall complete all as specified and directed by Engineer - in -Charge.

M& L for two coat of whether proof exterior acrylic emulsion paint with anti fungal property over a coat of primer including complete removal of old/ new decorated, plastered or unplastered surfaces of wall complete all as specified and directed by Engineer - in -Charge.

M&L for preparation of new steel surface exc 10cm width or girth and applying Two coat of red oxide primer and two coat of synthetic enamel paint glossy complete all as specified and as directed.

Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/semicorrugated sheet 0.50mm thick as per approved profile, coloured, having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in ridges to wall, fixed with self tapping screws as specified

Material and labour for false ceiling with aluminum grid work (Size of grid 600x600 mm) with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle and suspended with 2mm dia GI wire hooked to roof with needful adjustement bolts at an interval of 1.20 m centre to centre staggered and board with Eco board decorative type size 600 x 600 x 4 mm thick finished with two coats of oil bound distemper over a coat of primer on exposed surfaces all as specified and directed by Engineer-in-Charge.

M&L for providing 100mm thick cement concrete 1:4:8 type D2 using 40mm graded stonne aggregate as in sub base of flooring complete all as specified and directed.

M & L Chequered cement concrete tiles, with grey cement and pigment 300mm x300mm x20mm thick set, jointed and pointed in neat cement slurrry in floors including 15mm thick screed bed in Cm 1:4 all as specified and directed.

Taking up or down, 20mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed by Engineer-in-Charge.

M&L for 20 mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe all as specified and as directed.

S&F in repair stop valves 15mm dia bore of cast copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for union and fixed complete all as specified and as directed.

S&F in repair 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated screwed down, high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed by Engineer-in-Charge

S&F in repairs Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge

S&F in repairs two way bib cock, brass CP mixture for mixing hot & cold water complete of Make Jaquar Cat Part No ARI 39041 all as specified and as directed by Engineer-in-Charge

S&F repairs PVC connection 15mm size with CP brass Nuts of length 450mm complete all as specified and as directed by Engineer-in-Charge

S&F in repairs Aluminium anodised chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs, 10 ltr capacity, PVC flushing cistern, white, syphonic action type, low level, with inlet, ball valve float and handle, PVC flush pipe, brackets etc including taking down unserviceable flushing cistern etc, complete all as specified and as directed by Engineer-in-Charge.

S&F in Repair wash hand Basin of size 375x475x130mm including all connecting fittings and brackets etc of Jaquar Cat Part No JDS WHT-25907, complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white including connection to trap and to flushing pipe, anti syphonge pipe etc, including making good the floor complete all as specified and as directed.

S & F in repairs 15mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 142 gms, complete all as specified and directed by Engineer-in-Charge

S&F in repairs 15mm dia nipple of PTMT, suitable for HDPE water tank, min weight 38 gms, complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs shower arm 190mm long light body with wall flange and exclusive shower single flow with revolving ball joint as per cat. No.477 / 493 of make Jaquar complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Brass Chromium plated shower rose 125mm size, with swivel joint, fixing to steel pipe or union, complete all as specified and as directed by Engineer-in-Charge.

S&F 100 mm CI Floor trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls complete all as specified and as directed

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor complete all as specified and as directed.

S&F 75mm dia outlet PVC (SWR) floor trap,plain with grating incl joining with solvent cement complete all as specified and as directed.

S&F PVC (SWR) Gully 125/110 mm,seting and incl joining with solvent cement complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls and laid in floors complete all as specified and as directed.

S&F 75mm dia PVC (SWR) bend with oval access door complete all as specified and as directed.

S&F 110mm dia PVC (SWR) bend with oval access door complete all as specified and as directed.

S&F PVC (SWR) cowls 75mm dia complete all as specified and as directed.

S&F PVC (SWR) cowls 110mm dia complete all as specified and as directed.

Taking down carefully aluminium point wiring (light, fan, socket or power) DBs complete offering credit, making good disturbed surfaces of walls, floors, etc, all as specified and as directed.

M&L Point wiring complete with 1.5 sqmm single core FRLS PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC casing and caping and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable green in colour as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, etc., all as specified and as directed for one light point controlled by one one way switch.

All as per item No. 2 here - in - before but for one fan point controlled by one 5 Amps switch with 1.5 sq mm copper conductor cable.

All as per item No. 2 here - in - before but for 5 Amps switch socket point on the same board controlled by one switch.

All as per item No. 2 here - in - before but for 3 pin switch socket outlet point 5 amps on independent board.

Supply and fix switch piano flush button single pole oneway 5 amp.

Supply and fix switch socket outlet 3 & 2 pin (multi pin) 5 amp flush type.

All as per item No 2 here-in-before but for 3 pin 15 Amps switch socket combination on independent board with 4 sq mm copper cable and provision of 4 sq mm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting upto fittings

Supply and fix switch socket outlet multipurpose 3 pin 15 and 5 amp controlled by one switch, flush type.

Supply and fix ceiling rose surface bakelite 65x50mm 3 terminal

Supply and fix fan speed regulator, electronic suitable socket type for single phase AC, 240 volts, 50 Hz,100 watts, complete all as specified and as directed by Engineer-in-Charge

Supply and fixing energy efficient LED Smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected.

S&F 25 W New genration energy saving & envoirmental friendly long life versatile pressure dia cast aluminium IP65 road way luminaire with high power LEDs as light and electronic driver complete with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete as directed.

Dismantling and taking down ceiling fan 1200 mm sweep and refixing/connecting up including provision of cable from ceiling rose or connector to fan and Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as directed

Supply and fix in repair metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, including taking down old MCB/DB,

Supply and fix in repair MCB single pole 240 volts, 6 to 32 amps "B" series complete all as specified and as directed by Engineer-in-Charge

Supply and fix single pole and netural 240 Volts 6 To 32 amps complete all as specified and as directed by Engineer-in-Charge

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I

Supply, lay, test and commissioning under ground XLPE insulated and PVC sheathed, armoured heavy duty under ground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 2 C x 10 sq mm

Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and ID 38mm confirming to IS 14930 -II and ISI Marked all specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out Soft/loose Soil

Returning, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25cm soil / hard dense soil.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point Soft Soil / hard dense soil.

NAVJEEVAN ENTERPRISES

RADHA GOVIND CONSTRUCTION

MST BUILDERS

AMR TRADERS

T.THIYAGARAJAN

M/s.Tarun Construction