Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.9 LAdmitted-Finance | -3.89% | ₹1.9 L | L1 | Admitted-Finance |
Tender Value
₹1.9 L
EMD Value
₹3,900
Closing Date
16 Feb 2026, 6:00 pmClosed
Executive Engineer Medical and Health Div Churu
Executive Engineer Medical and Health Div Churu
SITC of ACCESS CONTROL SYSTEM in Sub District Hospital Rajgarh Distt. Churu. S No.2
2026_MEDIC_537461_1
NIT 24/2025-26 EE MH Churu
Open Tender
Electrical Works
90 days
Churu
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Executive Engineer Medical and Health Div Churu
₹3,900
18 Mar 2026
11 Feb 2026
17 Feb 2026
11 Feb 2026
16 Feb 2026
11 Feb 2026
Part "A" ACCESS CONTROL SYSTEM
STIC of Finger Print Access Control System having Operation System Linux, Size 4.3 inch. Resolution 800x480, Operation Method Capacitive Touch Screen, Pixel 2MP, Network Interface, RS-485, Exit Button, Door Contact input, USB 2.0,Card Capacity, 1500 or better, Fingerprint Capacity 1500 or better. Event Capacity 150000, Card Type Mifare I card, Card reading distance 0 to 3 cm, Power Supply 12VDC/2A, including metalic push button complete in all respect.
Supply of Mifare RF card Non Contacting IC Card having working distance no more than 100mm (Depends on the antenna dimension). Working Frequency: 13.56 MHz. High Data Transmission speed: 106 kbit/s, Anti-Conflict. 1 kbyte (16 zones. 4 sections per zone, 16 bytes per section). Long time data storage: 10 years, Only one serial No. for one card complete with all respect.
SITC of Electro magnetic single leaf lock having power supply and Maximum thrust 280 Kg (617 Lbs) liner thrust, Input Voltage 12VDC/24VDC, Working Current 12V/500mA, 24V/250 mA, LED indicator Red: Door is unlocked and Green: Door is locked, Suitable for wooden, Glass, Metal door complete with mounting bracket as required.
Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by PVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as per pre approved by Engineer in charge.
S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) 25MM PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required.
Please Enable Macros to View BoQ information
stage.html
html • 0.02 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.76 MB
BOQ_957654.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid