Dhule Industrial Area and Nardana Industrial Area M and R to WSS overhauling of actuators in filter gallery with servicing of valves servicing of apfc panel and other misc work

Amount

Servicing, minor repairs and maintenance of actuator and gear box assembly for operation of various valves at WSS at Sakegaon including minor spares such as set of gaskets, oil seals, nut bolts and any consumables like grease etc and maintaining the same for complete one year period in smooth operation etc consumables like grease etc and maintaining the same for complete one year period in smooth operation etc complete including all required labours etc

Repairs to the sluice / Butterfly valves of size up to 250 mm for their smooth operation including dismentling the same from location, do minor repairs required for making the same complete leakproof including required nut bolts, labours etc complete.

Supply of spares required for the actuators and gear box assemblies erected for operation of various valves/gates for the water supply scheme at Sakegaon as below, Microswitch for open /close with NO NC contacts.

Clutch fork assembly

Drive shaft assembly for the Number actuator.

Worm shaft assembly for the actuator

Set of travel and torque limit switch harness

Set of bearings.

Set of driving and driven gear.

servicing and repairs of detuned reactive panel at raw water and pure water with all switchgear and misc material as required every quarterly including vising and maintening power factor near to unity (Rate excluding GST)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 185 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying installation and commissioning air blower with 12.5 HP, 1440 RPM Lobe type as per our requirement with 5% packing forwarding and 10% transportation from Hariyana Delhi

Commissioning of air blower with all required hardware and civil foundation work as per requirement of company engineer.

Fabrication of 100 mm MS pipeline with sluice / ball valves and safety valve with bend and other hardware

Kay Engineer charges for commissioning supervision

Supply of star delta starter for 12.5 HP blower with all accessories

Repairs and maintenance of EOT up to 5TON inclusive of quarterly servicing, cleaning at various location by replacing of bkake shoe,pad,oiling & greasing of wire rope,geared motor limit switch,control panel servicing etc including replacement of worn out/damaged accesories,topping of oil,servicing of motors. (Rate excluding GST)

Servicing, minor repairs and maintenance of actuator and gear box assembly for operation of various valves at WSS at Sakegaon including minor spares such as set of gaskets, oil seals, nut bolts and any consumables like grease etc and maintaining the same for complete one year period in smooth operation etc consumables like grease etc and maintaining the same for complete one year period in smooth operation etc complete including all required labours etc

Repairs to the sluice valves for their smooth operation including dismantling the same from location, do minor repairs required for making the same complete leakproof including required nut bolts, labors etc complete.

Supplying installation and commissioning air blower with 12.5 HP, 1440 RPM Lobe type as per our requirement with 5% packing forwarding and 10% transportation from Hariyana Delhi

Commissioning of air blower with all required hardware and civil foundation work as per requirement of compani engineer.

Fabrication of 100 mm MS pipeline with sluice / ball valves and safety valve with bend and other hardware

Kay Engineer charges for commissioning supervision

Supply of star delta starter for 12.5 HP blower with all accessories

Servicing and repairs of detuned reactive panel at raw water and pure water with all switchgear and misc material as required every quarterly including vising and maintening power factor near to unity (Rate excluding GST)

Repairing of CLF Bridge motor gear box unit and drive chain sprocket assembly with replacement of bearing and greasing etc complete.(Rate excluding GST)

Repairs and maintenance of slip ring unit inclusive of servicing, cleaning, carbon brush, holder, rod etc. including replacement of worn out / damaged accessories. Topping of oil, servicing of motors (Rate Excluding GST)

Repairs and maintenance of Flash mixer drive unit inclusive of servicing, cleaning for motor,worm reduction gear of box,paddle assembly, flocculator drive assembly etc.including replacement of worn out /damaged accessories, topping of oil, servicing motors etc complete. (Rate excluding GST)

Repairs and maintenance of Traction drive unit Inclusive of servicing, cleaning, Overhauling of traction drive trolley,C.I.Wheels,wheel shafts with sphericals roller, bearings,chain transmission system,motors & gear box etc.including replacemnt of worn out/damaged accessories,topping of oil,servicing of motors once in six months etc complete. (Rate excluding GST)

Repairs and maintenance of Flocculator drive unit Inclusive of servicing, cleaning ,overhauling of motor, worm reduction gear of box, paddle assembly, flocculator drive assembly etc including replacement of worn our/damaged accessories, topping of oil, servicing of motors once in six months etc complete. (Rate excluding GST)

Repairs and maintenance of control panel board for CLF and rotary blowers inclusive of quarterly servicing,cleaning or replacing of faulty contractors,relays & other measuring devices like ammeter, voltmeter etc. including replacement of worn out/damaged accessories. (Rate excluding GST)

Repairing of sluice/Butterfly valve of size up to 250 mm, for their smooth operation including dismantlilng the same from location, minor repairs required for making the same complete leakproof including required nut bolts, labors etc complete. (Rate excluding GST)

Rewinding of electric motor above 1 HP and upto 2 HP, three phase upto 1400 RPM with copper wire, overhauling with minor repairs,lubricating of bal bearing & bush bearing, and replacing screws etc. testing for the original speed and no load consumtion with guarantee for one year. (Rate excluding GST)

Rewinding of electric motor above 5 HP and upto 7.5 HP, three phase upto 1400 RPM with copper wire,overhauling with minor repairs, lubricating of ball bearing & bush bearing and replacing screws etc.testing for the original speed and no load consumption with guarantee for one year. (Rate excluding GST)

Rewinding of electric motor above 12.5 HP and pto 15 HP, three phase upto 1400 RPM with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing and replacing screws etc.testing for the original speed and no load consumption with guarantee for one year. (Rate excluding GST)

Servicing and overhauling of motors, including removing from location, dismantling cleaning the windling drying,applying,varnish,baking,changing the bearing if necessary (bearing will be supplied by MIDC)greasing the bearing assembling and giving satisfactory trals on No load and full load etc. 25 HP (Rate excluding GST)

Outdoor Fittings (FG-ODF) Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single

Fans (FG-FN) Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in posi

LT - MCCBs (SW-MCCB) Providing & erecting 3 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% o

Dismantling (WG-DM) Dismantling the existing light, fan, bell, clock, independent plug point, wiring including circuit m

Indoor LED Fittings (FG-IDF/LED) Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sin

Pure Water Pump house Ultrasonic level transmitter Designing, Supplying, Installing, commissioning & testing of Ultras

Highbay LED Fittings (FG-ODF/LED) Supplying and erecting integrated LED Highbay Fitting 100W IP65 & IK08 class having die cast alumini

Cable Enclosures (CB-CE) Supplying & erecting G.I. pipe ‘A’ class 75 mm dia. for enclosing XLPE armoured cable on wall

Point Wiring (WG-PW) Point wiring for light/bell concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH

Point wiring for ceiling fan concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm. (2+1E) FRL

Raw Water Pump house Signal Cable 1.8.4) Designing, Supplying, Installing, commissioning & testing with Terminating & Interfacing of

Elink Software technologies Pvt Ltd. (BID ID -6658171)