Provision of channels and checker plates for new control room to accommodate new 110 V C R panels, Cable erection

SUPPLY OF MATERIALS 200A FP Change Over Switch

Box of size 6" x 2.75"x 2.5"- Sheet Metal - for MCB

63A DP DC MCB

125 X 65 MS Channel

65 X 65 X 6 MS Angle

50 X 50 X 6 MS Angle

6mm MS Chequered Plate

12mm MS Rod

65 X 10 MS Flat

95 sq,mm Aluminium Lugs

3.5C x 95 Sq.mm Aluminium Armoured Cable

Trip Coil / Close Coil

110V DC Anti Pumping Relay

110V DC NONC Contactor

110V 32A DC DP MCB

110V DC ON Delay Timer

Enamel Paint Black

Red Oxide Paint

Aluminium Paint

Enamel Paint - Green

Supply and provision of M8,M9, M10, M12 & M16 full thread GI Bolt, nuts & GI Washer of various size for erection of insulator or any other purpose wherever required and as directed by the field engineer.

Fabrication, supply and fixing of equipment board of various size

Manufactring and supply & fixing of LC/Key baord out of 75x25mm alu frame embedded with 12mm pre laminated wood particle board using screw on rear 2no's plain glass of 5mm thick fixed with metal roller moving on alu channel should be provided on front with locking arrangements LG glass piece should be fastened on the glass shutters for opening and closing wall clamp made out of 6mm plate should be provided on as per drawing and as directed by the field engineer.

Fabrication, supply & fitting of CT/PT junction box out of 14swg (2mm) M.S.Sheet wherever required as directed by the field engineer. The box shall be vrmin proof shall have sturdy hinges, provision for mounting terminal blocks and locking arrangements including cost of all materials. 400W x 150D x 300 H

Fabrication, supply & fitting of CT/PT junction box out of 14swg (2mm) M.S.Sheet wherever required as directed by the field engineer. The box shall be vrmin proof shall have sturdy hinges, provision for mounting terminal blocks and locking arrangements including cost of all materials. 500W x 150D x 500 H

Fabrication, supply & fitting of AC distribution box of size 750W x 250D x 750H mm out of 14swg (2mm) M.S.Sheet wherever required as directed by the field engineer. The box shall be vrmin proof shall have sturdy hinges, provision for mounting MCB and MCCB detachable gland plate and locking arrangements including cost

Labour charges for removing rust, primer coat, first & second coat painting both sides and in M.S Board

Labour charges for writting details in finished surface boards including cost of enamel paint and other conumables.

Labour charges for drawing layout and writing details in LC/Key board including cost of enamel paint and other consumables.

Supply and fixing of ISI mark HRC Fuse / rewireable fuse holder in panels/boxes for AC/DC/PT circuits wherever required as directed by the field engineer. 16 Amps

Supply and fixing of ISI mark HRC Fuse / rewireable fuse holder in panels/boxes for AC/DC/PT circuits wherever required as directed by the field engineer. 63 Amps

Supply and fixing of ISI mark HRC Fuse without holder of reputed make in panels/boxes for AC/DC/PT circuits wherever required as directed by the field engineer. 2 Amps

Supply and fixing of ISI mark HRC Fuse without holder of reputed make in panels/boxes for AC/DC/PT circuits wherever required as directed by the field engineer. 63 Amps

Supply and fixing of ISI mark porcelain rewireable fuse unit of reputed make in panels, boxes for AC circuits wherever required as directed by the field engineer. 200 Amps

Supply and fixing of wooden board 25mm / Hylam sheet 10mm thick for fixing fuse units wherever required as directed by the field enginerr.

Supply and fixing of mounting channel suitable for CBTM5 terminal block in panel / box as required and as directed by hte field engineer.

Supply and fixing of disconnected type terminal block suitable for CT circuits in panels / box as required and as directed by the field engineer.

Supply and glanding of ISI mark cable glands of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer. 19mm

Supply and glanding of ISI mark cable glands of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer. 25mm

Supply and glanding of ISI mark cable glands of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer. 28mm

Supply and glanding of ISI mark cable glands of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer. 45mm

Supply of cable core end including cost of cable socket, lug, ferrules, strap etc as per cable schedule

ACTUAL LABOUR CHARGES FOR WORK EXECUTION Labour, Machineries, consumables for fabrication of Heavy section without lengthwise welded joints (sectional weight 14kg/m and above)

Labour, Machineries, consumables for fabrication of Heavy section with lengthwise welded joints (sectional weight 14kg/m and above)

Labour, Machineries, consumables for fabrication of Heavy section without lengthwise welded joints (sectional weight 14kg/m and above)

Labour charges for rust removing, cleaning,painting of first primer coat (Red oxide) of all sections including cost of paint, brush and consumables

Labour charges for rust removing, cleaning,painting of first finishing coat of all sections including cost of paint, brush and consumables

Labour for painting (Aluminium) of Second finishing coat of all sections including cost of paint, brush and consumables

Labour charges for structure erection heavy section (sectional weight 14kg/m and above)

Labour charges for structure erection Light section (sectional weight 14kg/m and above)

Labour for erection of CT/PT Junction box including fabrication of clamp

Labour Charges machineries, consumables for erection of earth mat and earth risers , as directed by the field engineer at site

Labour for erection of panel / Battery charger Simple indoor / outdoors / MOM / BMB

Labour tools for charging battery 110V, 300AH

Labour for battery including assembling of wooden stand, painting of acid proof paint (if necessary) 110V, 300AH

In duct / trunch including the cost of aluminum tag for identification upto 8 Core

In duct / trunch including the cost of aluminum tag for identification upto 8 Core (LC Work)

In duct / trunch including the cost of aluminum tag for identification Above 8 Core

In duct / trunch including the cost of aluminum tag for identification Above 8 Core (LC work)

Labour for laying of cable and clamping in structure upto 8 Core

Labour for laying of cable and clamping in structure upto 8 Core (LC Work)

Labour for laying of cable and clamping in structure above 8 Core

Labour for laying of cable and clamping in structure above 8 Core (LC Work)

Labour for provision of cable end gland

Labour for provision of cable end gland (LC Work)

Labour for providing cable core end termination

Labour for providing cable core end termination (LC Work)

Labour for excavation and refilling of trunch of avag width of 0.3m & avg depth of 0.8 M for earth mat

Labour for loading or unloading or shifting of materials without using boards crane (one operation only) Non fragile

Labour for loading or unloading or shifting of materials without using boards crane (one operation only) fragile

Labour charges for painting of earth risers by green enamel painting

Labour charges for removing rust, primer coat, first & second coat painting of both sides and in M.S.Board

Labour for Dismanteling of panel / Battery charger Simple indoor / outdoors / MOM / BMB / AC DB

Labour tools for dis charging battery 30V, 120AH

Labour for dismantling of battery including wooden stand, 30V, 120AH

In duct / trunch removal of cable upto 8 Core

In duct / trunch removal of cable upto 8 Core (LC Work)

In duct / trunch removal of cable Above 8 Core

In duct / trunch removal of cable Above 8 Core (LC work)

Labour for dismantling of cable end gland

Labour for dismantling of cable end gland (LC Work)

Labour for dismantling cable core end termination

Labour for dismantling cable core end termination (LC Work)

Labour charges for structure erection Light section (sectional weight 14kg/m and above)

Demolishing of Existing Panel Pit

Disamantling and Installtion of 110V DC Closing Coil/ Tripping Coil along with internal wiring

Dismantling and Installation of 110V DC Anti Pumping Contactor along with internal wiring

Dismantling and Installation of 110V DC NONC Contactor

Dismantling and Installation of 110V DC ON Delay Timer