BLOCK HALDAUR KE VILL JHAL MAI MAIN ROAD PER MATA AHILYABAI HOLKAR SMARITI DWAR KA NIRMAN LOT4

Earth work in excavation in soil mixed with mooram/shingle kankar including supply of all material,labour and T&P etc.required for proper completion of work Chapter 4 S.I. NO 251

Concrete with 4cm gauge approved Stone ballast, coarse sand and cement in proportion of 8:4:1 including supply of all materials labour and completion of the work .S I no 281

R.C.C. work with cement C-sand and stone grit in 1:1.5:3 in lintels of door and slabs etc excluding s/o rainforcement and its binding but including fixing binding centering and shuttering including supply of all materials labourand T&P etc required for proper completion of the work as per S.I.No.-283A

M.S. or Iron work in plain work such as R.C.C. or R.B. work including bending for proper completion of work and including supply of steel as per complete S.I.no.504

Supply and erection of Built up overhead structure 10 t0 15 M span comprising of two Vertical post of 6Mt hight made tip of 300mm and NB medium Class M.S. plate at top and Bottom for bearing of horizontal frame comprising of 50mm N.B. Made medium class main pipe 40 mm medium class pipe for Vertical and horizontal members as of 40 mm class pipe heavy NB pipe bracing as per approved designed drawing with one coat of steel primer and two coat of synthetic enamel paint including supply of all materials labourand T&P etc required for proper completion of the work

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

S/Laying of 25 mm thick 45x45mm Kota Stone with 1:3 with cement and C/sand including supply of all material,labour and T&P etc.required for proper completion of work.Ch-14 new item no2

Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D- 4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.( Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). as per DSR 2023 16.60.1