Creation/Installation of polythene storage tank on steel truss and requirement of electro-mechanical equipment for harnessing of existing borewell near Govt. Middle School Saidpora, Pulwama under District Capex.

Amount

Laying and Jointing PVC Pipe. Heading

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete for making stand for storage tank.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing, fixing, testing and commissioning of PVC pipe fitting from storage tank to taps, taps of approved brand, gate valve, elbow, bends etc. whichever be necessary to make functional all complete as per the directions of site in charge and includes all sorts of carriages involved (to be paid as per actual details/measurements with supporting voucher duly verified by AEE concern). All complete job.

Electro-Mechanical Works

Providing, fitting and commissioning of single phase submersible type pumping unit along with allied jobs. Complete details of the job are as under. i) P/F/T and commissioning of single phase pumping equipment with following specifications: Discharge = 600 - 800 GPH, Head = 80 m - 60 m Motor Rating = Not Less than 2.0 HP. The pump motor is coupled together with a steel coupling. The job includes lowering of the submersible pump equipment. The job also includes P/F of MU-G/DOL starter suitable for motor rating and as decided by site engineer.

Providing and fitting of 32mm dia GI column pipe (Class-B).Pipe (03 meter in length) is properly threaded at both the ends.The pipe shall be provided and fitted with GI socket for jointing purpose, icluding the connection from delivery to storage sump.

P/F of 05 KVA single phase oil cooled voltage stabiliser along with allied accesories viz three pin top, MCB etc, input voltage 90 - 150 V, Output Voltage 220 V.

P/F of copper sumersible cable 2.5 sq.mm, connecting pumping unit with motor starter

Providing Laying and connection of 2Cx10 mm² XLPE Aluminum Armored Cable from the connector of high mast pole to the stabilizer. The job includes underground laying or overhanging as per requirement and directions of the site in-charge.The cables hall be laid in flexible pvc condits over the walls/ceillings ground with proper supports.

P/F of 05 mm steel wire rope for holding sub type pumping unit

P/F of 40mm dia MS holding clamps (02 No's) fabricated out of 10mm thick MS plate with nuts and bolts.

P/F of reducer 32mmdia -25mm = 01 Nos, reducer 40mmdia -32mm = 01 Nos. Nipples 25/32/40 mm=03 Nos The job also includes providing and fitting of 25/32/40 mm dia GI bend=04 Nos, Well Cap, Class-B.

Fabrication, providing and fitting of MS Canopy for safet installing of DOL starter and V-stabliser. The job also include providing and fitting of Wiremesh and CGI sheet so as to make the encloser safe and secure. Size of Canopy=4'x3'x4' to be fabricated out of ISA 50x50x5

Providing/Laying of Plain Cement Concrete block of size 4ft×3ft×2 ft in 1:3:6 mix to give adequate strength to ato grout the canopy. Cost on account of stuttering, strutting, centring, curing etc. is included in the scope of work. In case the suitable space for the above specification is not available, the surface area is to be adjusted accordingly.

MOHD SHAFI YATOO (BID ID -2649580)