CONSTRUCTION OF TRANSGENDER TOILET IN PREMISES OF JMFC COURT AT PIPILI.

civil works Earthwork excavation of foundation in ordinary soil including levelling & dressing the bed up to the required depth & removing the excavated earth & depositing the same away from the work site within initial lead of 50 mtr &al of 15 me, including cest conveyance of all materials labour T&Petc complete.

Providing Plain cement concrete (1:3:6) in foundation using 4Cm Size black hard crusher broken granite stone metal of approved quality from approved quarry including lowering laying and compacting concrete in layers not exceeding 15cm thick, watering and curing including cost, conveyance

Flyash brick masonry in cement mortar of mix (1:6) with cement and screened & washed sand for mortar after immersing the bricks in water before use in Superstructure: including splays cutting, circular moulding corbelling chamfering and similar such type of works watering. In Foundation and Plinth

In Superstructure

R.C.C. M-20 in following items using 12mm to 20mm size black hard crusher boken granite chips of approved quality from approved quarry including cost, conveyance, royalties and taxes of all materials and cost of all labour sundries T&P etc complete. Plinth Bend

Lintel

Chajja

Roof Beam

Roof Slab

Cutting, Straightening coiled or bent up MS rods or Tor steel welding or jointing if necessary bending binding, tying the grills as required for ICC works providing fan nooks where. necessary and hosting lowering and placing in proper. Plinth Bend,Lintel Bend,Chajja,Roof Beam,Roof Slab

Supplying and filling in foundation trenches and plinth with sand well watered and rammed in layers not exceeding 23cm in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of

Providing 12 mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, royalties and taxes of all materiale cost of all lahnur TRD eundriae and scaffolding

Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) and finished smooth to the rough surface of masonry walls after racking out joints including watering and curing, rounding of corners etc. complete with cost, conveyance, royalties and taxes of all

Providing 6mm thick celling plaster (1:4) to roof including watering & curring with cost conveyance royalties and tares of all materias cost of all labour all T&P red for the work etc complete in all respects as directed by the Engineer charge

Providing supplying fitting & Fixing of Glazed ceramic tile infloors laid over 20 mm thick bed of cement mortar 1:4 (1) cement 4 sand) including finishing the joints with white coment & colour pigmentmix & cost of all materials, labour, TAP, Sundries eic complete as per the direction of the Engineer-in-charge

Providing supplying fitting & Fixing of Glazed ceramic tile in dadoos, skirting riser of steps on 12 mm thick bed of cement mortar 1:3 (1 cement 3 sand) including finishing the joints, with white cement & colour pigmentmix & cost of all materials, labour, T&P, Sundries etc.complete as per the

Providing, fitting and fixing in position of W.P.C choukaths in all floors at all height for door and windows including two coats of coaltaring to wall side faces and fixing the same in position including cost, conveyance, and taxes of all materials with all labour and T&P etc complete as directed by the Engineer-in-

Providing, fitting and fixing in position of W.P.C shutters in all floors at all height for door and windows including two coats of coaltaring to wall side faces and fixing the same in position including cost, conveyance, and taxes of all materials with all labour and T&P etc complete as directed by the Engineer-in-

Providing fitting and fixing in position 12mm G.I square bar Grill with G.1. flat and angles of approved drawing and design including cutting bending the angles and flats to proper sizes welding, chamfering etc fitted and fixed to the walls with CC (1:2:4) including cost conveyance royalties and thaes of

Providing & finishing wall surface with weather Coat paint two coats with approved paint & approved shade over a coat of primmer by means of brush to wall surface after cleaning the surface with scarfolding including watering and curing scafolding etc complete including cost, conveyance, royality and taxes of all materials with labour T&P sundries etc complete as directed by the Engr -in-charge

Painting two coats with any approved enamel paint of approved quality & approved shade over a coat of primmer on wood work including cost of materials, labour, T&P, sundries. Grill

E.I WORK Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 6Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. (Make of wire-L&T/ Anchor/ Havells/ V-Guard/ Great White/ HPL or equivalent). Group-A -L.P- 2 F.P- C.B.P-

Group-B L.P- 4 F.P- C.B.P-

Group-C L.P- 4 F.P- 4 C.B.P-

Supply and fixing of 6Amp plug with 6Amp switch on existing board. (Modular type)(Make-Great white/ Legrand / ABB/ Roma/ Havells/ HPL/ Cona or equivalent).

Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL or equivalent).2 X 2.5 sq.mm +1 X 1.5 sq.mm -do-

Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (Make-HPL/ Havells/ Legrand / L&T/ C&S or equivalent). 4way,Double door

Supply and fixing of 0.5Amp to 32A rating 240 V "C" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-HPL/ Havells/ Legrand / L&T/ ABB or equivalent).6Amp rating to 32Amp (SP)MCB

Supply and fixing of different type of light fittings. Supply and Fixing of 15/ 16 watt recess LED cicular light fitting. (Make- Havells/ Phillips/ Bajaj/ Crompton or equivalent). as per the direction of Engineer-in-charge.

Supply and Fixing of 60 watt LED street light fitting. (Make- Havells/ Phillips/ Bajaj/ Crompton or equivalent). as per the direction of Engineer-in-charge.

Supply and fixing of following fan. Exhaust fan 12" size with making hole of required size. (Make-Havells/ Usha/ Almonard/ Orient/ Crompton or equivalent). as per the direction of Engineer-in-charge.

Supply and Fixing of 32Amp FT/DP switch on MS board with cover. (Make-Cona/ Anchor or equivalent).

Supply and fixing of 40mm dia GI Street light bracket. (1mtr long)

S/F of PVC T/C U.B almn. Wire with No.8/10 SWG G.I supporting wire. 6mm2 Almn. Wire

P.H WORK...Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor c-pvc pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge. (Supreme/Ashirvad/Oriplast). In ground floor = 25mm dia 'C' PVC pipe

32mm dia UPVC ASTM-D pipes

Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. In ground floor - 250mm thick wall

Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge.250mm to 375mm thick wall.

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.In ground floor

Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge.15mm dia CP Pillar cock (Plaza/Aquatic/Amber)

15mm dia CP Angle stop cock (Plaza/Aquatic/Amber)

15mm dia CP Two way Bib cock (Plaza/Aquatic/Amber)

15mm dia CP Health Faucet (Plaza/Aquatic/Amber)

25mm CPVC Ball Valve

15mm dia CP Flange

15mm dia CP Extension Piece

125mm dia CP Gratting

Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral S or P trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge. E.W.C. S trap plain with seat cover(Parryware/Hindware/Neycer)

Supplying all materials, labour T&P and and fixing 10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer in charge. 10 litres capacity PVC LL cistern (Parryware/Hindware/Neycer)

Supplying all materials, labour, T&P and fixing of wash hand basins with pedestal complete recessed at the back for the reception of pipes and fittings with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge. 550mmx400mm size Wash hand basin with Porcelain Pedestal (Parryware/Hindware/Neycer)

Supplying all materials, labour, T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. 1000 Ltr PVC water storage tank (3 Layer White)-on 1st. Floor

Supplying all materials,labour,T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No.13592/1992 to walls with nails,bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification,testing,earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of Engineer-in-charge. (Supreme/Ashirvad/Oriplast).110mm dia U-PVC SWR Pipe

110mm U-PVC Door Tee

110mm U-PVC Plain Tee

110mm U-PVC Door Bend

110mm dia U-PVC Plain Band

110mm dia U-PVC 'P' trap

110mm U-PVC Cowl.

110mm dia PVC SWR Clamp/Clip.

Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge. Fixing 600mmx450mm size B.E Mirror

Supplying all materials, labour, T&P and fixing standard size glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. 600mmx125mm glass shelf with CP/NP guard rails

Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.Towel Ring Round -

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.CP soap holder

Please Enable Macros to View BoQ information