S.I.T.C of Street Light from Circuit House Churk to Police Line in Distt-Sonbhadra Under DMF Programme

Supply & fixing of 7 mtr. GI Octagonal pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12 mm thik) having 3mm thikness with single arm braket (1 Mtr. Length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and required T&P compete in all respect.

Supply and fixing of LED Street light fitting having die cast aluminium body and diffuser with driver set suitable for 140 to 150 Watt. Confirming to IP 66 and above Protection complete in all respect.

S&F of Amp. 6 to 32 Amp. DP MCB (10 KA) C Curve

Supply and burying of 40mm dia x 4.5 metres long G.I. pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8 SWG GI wire in G.I. pipe up to appron (and from appron to switch board the cost of G.I. wire and Pipe will be extra) upto switch board, 30 cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/ coke and salt at least 150mm thick alround etc. as per directions of Engineer- in charge complete in all respect.

Supply and fixing of one number 8 SWG G.I. wire in 15 mm dia. G.I. pipe for Earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed dat site.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm.thick sand all aroyund and protected with burntt bricks on side and on top. On surface the cable run shall be fixed on M.S. clamps. etc. of suitable size or as directed by the Engneer in charge, complete in all respect. The armouring of the cable shall be properly connected with the earth cnductor by clamps etc.

16 s.q. mm 4 core

Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulation with tape and making connection etc. complete in all respect as per direction of the Engineer-incharge.

Supply and wiring with 2.5 s.q.mm PVC insulated copper wire for connection of street light.

Supply and fixing of heavy duti cadmium plated copper connector with end plate complete in all respect.

Four way connector HKM 100

Suplly and Fixing of crimping, solderless, copper tin electroplated lugs of Dowells/Ismail make suitable for 1.5 sq.mm to 2.5 sq.mm cables, including tapping with insulating tape, complete in all respect.

Feeder panel for common operation of street light with a inccoming 200 A MCCB-1 NOS and outgoing 200A MCCB-1,63 A MCCB-3 nos

Please Enable Macros to View BoQ information