60/W/EDC-I/SRE/2024-25

Amount

Detail of Work

Safe cartage of PCC poles up to 8.5 Mtr. from ESC, SRE/JE store to site of work at various sites including loading & unloading at both ends.(Dist.Up to 40 Km.)

Safely cartage of other complete line material / 11 KV XLPE cable / ABC cable (Except PCC Poles) from ESC, SRE/ JE store to site of work at various sites including loading, unloading at both ends.( Dist.App. 0 to 40 Km.)

Safe cartage of 25 KVA T/F from ESC,SRE, to the site of work including loading & unloading at both ends. (Dist. Upto 40 km.)

Safe cartage of 250 KVA T/F from ESC,SRE, to the site of work including loading & unloading at both ends. (Dist. Upto 40 km.)

Safe cartage of CT/PT Unit from ESC,SRE, to the site of work including loading & unloading at both ends. (Dist. Upto 40 km.)

Safe cartage of Metering cubical from ESC,SRE, to the site of work including loading & unloading at both ends. (Dist. Upto 40 km.)

Erection of single support on PCC poles up to 8.5 Mtr Long with complete fitting of all accessories of 11 KV/LT line. complete.

Erection of double Pole on ST/ PCC poles up to 8.5/9/11/13 Mtr Mtr Long with complete fitting with all accessories complete.

Fixing of 11 KV stay rods by digging of pits in block of 600X600X300 mm. & with nozzling of stay wire 7/10 SWG and fitting the same on the pole

Concreting of stay rod in ratio 1:4:8 with Ist class brick ballast with cement, sand

Providing of F- Clamp for PCC poles with nuts bolts made of new MS flat iron 50x6 mm.

Earthing of poles by earthing rod

Providing of All type MS Clamp for PCC poles with nuts bolts made of new MS flat iron 50x6 mm.

Providing of Stay Clamp for PCC poles with nuts bolts made of new MS flat iron 50x6 mm.

Providing of nuts & bolts of various sizes.

Providing of Suspention clamp with I- Hook

Providing of J-Hook

Providing of Piercing connector Diff. size.

Providing of Number Plate

Danger Board with clamp

Providing of Dead & Clamp

Providing of PG Clamp

Providing of LT PCC Pole Clamp

Providing of Top & Dropper Channel Clamp

Providing of Clamp with nut & Bolt

Safely cartage of 11 KV Fuse set from ESC SRE to Site of work including loading and unloading at both ends.

Laying, lifting, Stringing, sagging jumpring & binding of ACSR Weasel Conductor for 11KV/LT Line including complete.

Laying, lifting, Stringing, sagging jumpring & binding of ACSR Rabbit Conductor for 11KV/LT Line including complete.

Safely Installation of 11 KV Fuse set and connetion properly.

Safe installation of 10/25/63/100 KVA T/F on the double pole with complete fittings including making connections and commissioning.

Construction of plinth for installation of 250 KVA T/F of size 1.5x1.5x1.5 Mtr. made of 9" thick wall in all the four sides with 6" thick RCC top duly filled with sand & plastered 12 mm. thick in ratio 1:4 with cement & sand on outer surface of brick wall .

Safe installation of 250 KVA T/F on the Plinth with complete fittings including making HT connections and commissioning.

Providing of Aluminum Bolted Type lug of size 240 sq mm.

Laying and making connections of LT XLPE cable 1x240 sq.mm. from T/F to double pole

Providing and fixing of wire mesh fencing size 2.5x2.5x2.5 mt. grouting making frame of MS angal 35x35x5 mm and fixing four no. MS strip size 25x6 mmat equal distance in between the frame and fixing square mesh 50 mm square in each frame the fencing should cover all side of T/F with providing 1 No. door size 6’x3’ with sitakni & Dandala.

Safe installation of CT/PT Unit on the double pole with complete fittings including making connections and commissioning.

Safe installation of Metering cubical in the room with complete fittings including making connections and commissioning.

Chemical Earthing of Metering cubical/ CT/PT Unit/250 KVA T/F and connecting with G.I. Strip of size 35X4 mm to the Metering cubical/ CT/PT Unit Complete Properly.

Laying, lifting, Stringing, proper sagging ABC cable of size 3x50+1x35+1x16 sq.mm. including fixing of all accessories.

Laying, lifting, Stringing, proper sagging ABC cable of size 3x95+1x70+1x16 sq.mm. including fixing of all accessories.

Laying, lifting, stringing proper sagging of 11 KV XLPE cable 3X120 sq mm of including complete etc

Making of 11 KV cable terminations kit out door & indoor of size 3X120 sq mm.

Laying and making connections of LT PVC/XLPE cable 1x25 sq.mm.

Safely fixing of Three Phase Distribution Box.

Water Level Earthing of 250 KVA T/F (1 No body & 1 No. neutral earthing) by boring of 60 Ft deep & fixing of 60 ft. G.I pipe 11/2" Dia (Jindal Class B) and connecting with G.I. Strip of size 40x5 mm and G.I wire at bottom of G.I pipe to the T/F providing of required charcoal & salt in the pipe

Grouting of PCC Poles 8.5 Mtr. long with cement concreting in bolck of 600X600X1500 MM. in ratio 1:4:8 with cement, sand and brick ballast size 1''x1.5'' with plinth.

Off shooting of tree branches touching the 11 KV/LT line.

M/s Ayushi Enterprises (BID ID -4772820)

FAGGU RAM & COMPANY (BID ID -4772879)