Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹10.3 LAccepted-AOC SHAMSHU COMPLEX FORT ROAD LEH LADAKH 194101 | LEH | LEH | LADAKH | 194101 | L-1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates | |
| 2 | L-2₹12.9 L+₹2.6 L (25.6%)Rejected-Finance LEH 194101 | LEH | LEH | LADAKH | 194101 | L-2 | Rejected-Finance Higher side quoted amount |
Tender Value
₹11.5 L
EMD Value
₹22,980
Closing Date
24 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE KHUMBATHANG
CWE KHUMBATHANG
SPL REPAIR OF BLDG NO T43 AT 402 I ARTY BDE CAMP AT NURLA MIL STN UNDER AGE I NIMU
2022_MES_555955_2
80051/93/E8
Open Tender
Civil Works
Item Rate
180 days
AGE (I) NIMU
As per tender documents
8 documents required · 8 mandatory
₹500
AGE (I) NIMU
₹22,980
2 Dec 2022
3 Nov 2022
25 Nov 2022
3 Nov 2022
24 Nov 2022
10 Nov 2022
Amount
Sch "A' Part-I B/R work:- Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, roof coverings & wall
S&F 0.63mm thick, galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with self tapping screw or L-type or J-type or crancked hook bolts and washers as in roofs, walls etc, with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed by Engr-in-Charge.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, painted with one coat of zinc chromate primer paint complete all as specified and directed by Engr-in-Charge.
S&F in repair MS plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new surfaces of steel of any description , over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge ..
Dismantling of floor hearth and wall tiling including cement mortar bedding (but not backing) and removing serviceable like to store and rubbish off the premises, complete all as specified and directed by Engr-in-Charge
M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including laid over screed bed of 15mm thick of cement mortar 1:6 all as specified and directed.
Demolition of PCC (un-reinforced) in ground floors & pavings n.exc 15 CM thickness below or above ground level, complete all as specified and directed by Engr-in-Charge.
M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in flooring, PCC path, sub base and surface finished even and fair with out using extra cement all as specified and as directed.
M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded crushed stone aggregate as in sub base, flooring and surface finished rough all as specified and as directed
Taking down Chowkhats or frames exc 1.5 Sqm but not exc. 4 sq. m each (without taking off shutters from the frames)
Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)
S&F for Aluminium powder coated door window frame for door, window/ ventilator/ partitions with one or more rebate including jointing cleat for fixing etc. complete all as specified and directed by Engr-in-Charge.
M&L for anodised aluminium door shutters, side hung type without sash bars, aluminium section weighing 0.55 kg/mtr (Thickness or powder coating not less than 50 micron) including necessary jointing cleats, glazing clips, rubber packing, anodised snap beading, screws, anodised aluminium fittings such as hinges type B-21, 100 mm long (02 No) suitable handle (02 No) sliding door bolt and necessary locking arrangement complete all as specified and as directed.
M&L for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
M&L for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
Hacking out broken glass (any thickness, size or description) from wooden/metal frames, glazed with putty or fixed with beads all as specified
S&F 5.5 mm thick ordinary quality sheet glass, and glazing with aluminium beading and rubber gasket in square exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge.
S&F 3 mm thick ordinary quality sheet glass, and glazing with aluminium beading and rubber gasket in square exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge.
S&F 3mm ACP sheet fixed in aluminium/wooden frame with nessery arrangment and fixed in repair complete all as specified and directed by Engr-in-Charge.
S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engr-in-Charge.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.
S&F in repair 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work on ceiling complete all as specified and directed Engr-in-Charge.
Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position as in unframed work
M&L for Plain fillets of second class soft wood, sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads complete all as specified and directed by Engr-in-Charge.
M&L for plain fillets square, or rectangular or triangular in section clean sawn, secured with nails exc. 3 sqcm and not exc. 6 sqcm in section of second class hard wood wrought and chamfered all as specified
S&F in repair anodised aluminium snap grid of size 605*605 mm frame work for false ceiling using aluminium Tee 38 mm*1.30 mm and aluminium angle 23 mm * 23 mm * 1.30 mm with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
M&L for 4 mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws complete all as specified and directed by Engr-in-Charge.
M&L for chequered cement concrte tile 25x25x25mm/ 30x30x25 mm thick with grey cement and pigment confirming jointed and pointed in neat cement slurry in floor laid over 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.
M&L for 75mm thick cement concrete work as in plinth protection type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) finishing surface even and smooth without using extra cement.
Sch "A' Part-II E/M work:- Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc.
M&L for point wiring with two single core PVC insulated, unsheathed, FRLS type, 1100 volts grade, multistranded copper conductor cable 1.5 sqmm in and including PVC casing caping ISI marked with all connected accessories including one single core multistanded PVC insulated FRLS type, 1.5 sqmm copper conductor cable unsheathed as earth continuity cable including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet top cover complete all as specified. (a) One light /fan/bell point/buzzer point exhaust fan controlled by one nos, one way 5/6 Amps switch.
All as per Srl item No34 here in before but for one 3 pin socket outlet 5 Amps on independent board.
All as per Srl item No 34 here in before but for one 3 pin 5 Amps switch socket on same board.
All as per Srl item No. 34 here-in-before but with conductor of size 4 sqmm (Nominal area) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 4 sqmm PVC insulated stranded copper conductor Cable.
S&F in replacement switch Socket combination 2 in 1, 3 pin, 6 and 16 amp flush type complete all as specified and directed by Engineer-in-Charge.
S&F in replacement Socket 2 in 1, 3 pin, 6 amp flush type complete all as specified and directed by Engineer-in-Charge.
S&F in replacement switch Socket combination 2 in 1, 3 pin, 6 amp flush type complete all as specified and directed by Engineer-in-Charge.
S&F in repair Switch piano, flush type single pole, one way 6 Amp
S&F in repair Ceiling rose 65x50mm, 2 to 3 terminal PVC/polycarbonate, isolated body
S&F in replacement LED luminarie 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
S&F in replacement LED luminarie 150 mm x 150 mm, 12 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
S&F in repair LED lights fitting mirror type 1x 10W, 2 feet, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S&F LED 1x20 Watt, 4 feet, 220 V, AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S&F in replacement exhaust fan made sturdy engineering plastic body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, of sweep 300mm complete as specified and directed.
S&F in repair sheet metal powder coated versatile double door SPN distribution board, 8way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz .
S&F in repair MCB SPN 63 Amp 240 volt AC with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.
S&F in repair MCB SP 6-32 Amp 240 volt AC with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.
M&L for Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6.3) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to galvanized earh lead wire of size 4.0 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI light grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including form work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result complete including taking out of existing earthing all as specified.
Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs .00 and any other reduction if any from quoted amount.
M/S TSERING ANGCHOK
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .