MAINTENANCE, REPAIR AND REPLACEMENT OF DEFECTIVE ITEMS OF INTERNAL ELECTRIFICATION AND MISC ITEMS AT 9 BRD, VIMAN NAGAR, 509 AND 1020 AREA AT AF STN PUNE

Amount

Taking down the existing surface batten type point wiring of aluminium for Light, fan, Sockets, power sockets, stair case light point complete with switch, socket, regulator, bracket fitting etc and making good disturbed surfaces for wall, floors etc complete all as specified and directed.

Taking down cearfully by unscrewing the unserviceable DB Boxes, MCB distribution boards SP & TPN with porcelain cutouts etc complete all as specified and directed.

Taking down the sub main wiring of any dia / sq mm on teak wood batten / PVC conduit GI earth wire complete all as specified and directed.

Material and labour for providing point wiring with two runs of 1.5 Sqmm multi stranded copper conductor Flame retardant PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor Flame retardant PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings/fixture etc and open type Plastic Enclosure( Plastic Switch Board ) ISI Marked (IS:14772) for housing switches / sockets complete all as specified and directed.

One light point controlled by one switch .

One Fan point controlled by one regulator/switch.

One 3 pin socket 5 A on independent board.

One 3 pin socket 5 A on the same switch board.

One bell point controlled by one bell switch.

Material and labour for providing point wiring with two runs of 2.5 Sqmm multi stranded copper conductor Flame retardant PVC insulated single core 1100 volts grade & with one run of 2.5 Sqmm single core copper stranded Flame retardant PVC insulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings / fixture etc and open type Plastic Enclosure (Plastic Switch Board) ISI marked (IS 14782) for housing one 15 A Switch / sockets complete all as specified and directed.

M & L for sub main wiring with two runs of single core 2.5 Sq mm Flame retardant PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 1.5 Sq mm single core Flame retardan PVC insulated unsheathed multi stranded copper conductor green colour cable for continuous earthing complete in & including PVC casing & caping with all fttiing & fixtures complete all as specified and directed. (Note:- Two runs of 2.5 Sqmm copper cable & one run of 1.5 sqmm copper cable including PVC casing & caping shall be mesured and paid as one length)

M & L for sub main wiring with two runs of single core 4.0 Sq mm Flame retardant PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 2.50 Sq mm single core Flame retardan PVC insulated unsheathed multi stranded copper conductor green colour cable for continuous earthing complete in & including PVC casing & caping with all fttiing & fixtures complete all as specified and directed. (Note:- Two runs of 4 Sqmm copper cable & one run of 2.5 sqmm copper cable including PVC casing & caping shall be measured and paid as one length)

M & L for sub main wiring with two runs of single core 6.0Sq mm Flame retardant PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 4.0 Sq mm single core Flame retardant PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor drawn in & including casing & caping complete all as specified and directed. ( Note:- Two runs of 6 Sqmm copper cable & one run of 4 sqmm copper cable including PVC casing & caping shall be measured & paid as one length )

M & L for sub main wiring with two runs of single core 10.0Sq mm Flame retardant PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 6.0 Sq mm single core Flame retardant PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor drawn in & including casing & caping complete all as specified and directed. ( Note:-Two runs of 10 Sqmm copper cable & one run of 6 sqmm copper cable including PVC casing & caping shall be measured & paid as one length )

Supply and fix switch piano flush type 5 Amp one way complete all as specified and directed.

Supply and fix Socket out let 2in 1, 5 pin 5 Amp complete all as specified and directed.

Supply and fix switch socket combination 2 in 1, 5 A flush type complete all as specified and directed.

Supply and fix switch socket combination 5 / 16 A, 5 in 1, flush type complete all as specified and directed.

Supply and fix Piano switch bell push type switch 5 A complete all as specified and directed.

Supply and fix bell electric 230V single pole complete all as specified and directed.

S & F Fan Regulator electronic step type 100 W complete all as specified and directed.

S&F angle / batten holder insulated body with back plate for batten fittings complete all as specified and directed.

Supply and fix ceiling rose surface type bakelite / PVC three terminal 65 x 50mm complete all as specified and directed.

Supply and fix high quality indoor Surface and wall mounted LED batten 20 Watt, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty driver having THD<10%. complete with all accessories internally pre-wired and including connecting up with three core 0.5 Sqmm flexible copper conductor cable ceiling rose to fitting terminal complete all as specified and directed. Make : Havells, Model: Lumiline Plus LED Cat part No: LUMILINEPLUSBS20WLED865SPCSS or equivalent in CG/Philips/Bajaj

Supply and fixing LED mirror light fitting 05 Watt including electrical connections complete all as specified and directed. Make CG Cat Part No LCL-05-CDL or equivalent make

Supply and fix Energy efficient recess mounted LED panel fitting 34 Watt suitable for 2x2 grid in white colour with high quality diffuser for uniform light & high Efficiency. Made from CRCA sheet, Pre-coated white color. Separate replaceable electronic driver, lumen constant of 3300/4000K colour temperature with current electronic connections as directed as per Havells, Model: Venus Neo HE PRI Cat part No: VENUSNEOHE2X2R34WLED840PIRSENSOR or equivalent in CG/Philips/Bajaj

Supply & fix LED street light fitting Energy saving and environmental friendly long life LED street light fittings 30 Watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and Impact resistance of IK07 with 10KV Built-in Surge Protection Device The light fittings shall be fixed on pole/bldg with and including 25/40 mm dia ( or higher size as per manufacturer recommendation), bracket 1.5 m long complete with MS flat iron clamps (clamp shall be 40x5 mm MS flat), nuts and bolts and washers painting the clamps with coat of aluminium paint over a coat of red oxide primer including connection complete all as specified and directed. Make: Havells, Cat Part No: ENDURACITYLITEPLATPLUSSL30WLED757SASYBOPC or equivalant in Philips/Bajaj/CG

S&F Vertical double door Distribution board TPN 4 way 200 A rated busbar consisting of MCCB. 100A 10KA - 1 NO complete all as specified and directed.

Supply and fix sheet metal enclosure MCB DB double door SPN 8 way 230 V with neutral link and with 200 A bus bar complete all as specified and directed.

Supply and fix sheet metal enclosure MCB DB double door SPN 12 way 230 V with neutral link and with 200 A bus bar complete all as specified and directed.

Supply and fix MCB SPN 240 V, 6 to 32 Amps. complete all as specified and directed.

Supply and fix MCB SP 240 V ,6 to 32 Amps complete all as specified and directed.

M & L for providing earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6mm thick buried directly in ground earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to galvanised earth lead wire 4.00mm dia by means of bolts, nuts, checknuts & washers of GI or steel and connecting to earth dolly all as shown in electrical plate No. 3 of SSR Part I of 1991 & testing complete including 15mm dia light grade GI pipe upto 7.5mtr long, excavation in any type of strata, PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm with frame, test box , funnel, wire mesh with GI watering pipe etc. complete all as specified and directed.

Supply and fix in repair ceiling fan 1200 mm sweep 230 volts, 5 star rating including blades , canopy & downrod complete all as specified and directed. Note : Old U/s fan to be deposited in AGE E/M store Yard.

Taking down ceiling fan single phase 240 V 1200 mm /1400mm sweep from the existing position including disconnecting supply cable from ceiling rose / connector opening ceiling fan carefully and taking out worn out/defective spare parts such as bearing/ bush shaft , blades, split pin condenser rubber reel nuts and bolts and washer etc cleaning and washing the bearings /bushs thoroughly and applying necessary lubricants etc and reassembling of ceiling fan after replacement of wornout parts and hanging in original position connecting and testing complete all as specified and directed. [Note :- Replacement of spares for ceiling fan shall be measured and paid seperately]

Ditto all as per Ser Item No 30.00 above but for exhaust fan 300 / 450 mm sweep complete all as specified and directed.

Ditto all as per Ser Item No 30.00 above but for wall mounting fan any sweep complete all as specified and directed.

Supply and fix ball bearing SKF 6201 complete all as specified and directed.

Supply and fix ball bearing SKF 6202 complete all as specified and directed.

Supply and fix ball bearing SKF 6203 complete all as specified and directed.

S&F Gunmetal bush complete all as specified and directed.

Supply and fix capacitor 2.5 Mfd /3.15 mfd complete all as specified and directed.

Supply and fix capacitor 4 Mfd complete all as specified and directed.

Supply and fix rubber reel with nuts bolts and split pin for ceiling fan complete all as specified and directed.

Supply and fixing PVC unsheathed 3 core cable copper flexible wire 0.5 Sqmm size complete all as specified and directed.

M&L for rewinding of ceiling fans of 1200 / 1400 mm sweep with suitable size of copper winding wire of same gauge & number of turns complete with insulation complete all as specified and directed.

M&L for rewinding of exhaust fans of 300 / 380 / 450 mm sweep with suitable size of copper winding wire of same gauge & number of turns complete with insulation complete all as specified and directed.

M&L for rewinding of wall fans of 400 mm sweep with suitable size of copper winding wire of same gauge & number of turns complete with insulation complete all as specified and directed.

S&F fan clamp suitable for ceiling fan complete all as specified and directed.

S&F fan blade suitable for existing wall mounting fan / exhaust fan complete all as specified and directed.

Taking down Geyser 25/50 Ltrs from the existing position including disconnecting supply cable from connector opening geyser carefully and taking out worn out/defective spare parts such as Thermostat, appratus terminal plate, glass wool, element etc cleaning and reassembling of geyser after replacement of wornout parts and hanging in original position connecting and testing complete all as specified and directed. [Note :- Replacement of spares for geyser shall be measured and paid separately]

Supply and fix thermostat suitable for geyser of any make and any size complete all as specified and directed.

Supply and fix indicating neon lamps suitable for geyser of any make complete all as specified and directed.

Supply and fix apparatus terminal plate assembly with provision of inlet and outlet copper tubing including nuts bolts and washers suitable for geyser of any type and any make complete all as specified and directed.

Supply and fix PVC connecting pipe heavy duty 15 mm dia for inlet and outlet with brass coupling complete all as specified and directed.

Supply and fix for glass wool suitable for any type and make for geyser complete all as specified and directed.

Supply and fix geyser element 250 V 1.5 KW suitable for 25 ltrs capacity complete all as specified and directed.

S&F dead weight assembly on existing geyser complete all as specified and directed.

Supply & Fix in replacement Recessed pressure die-cast aluminium luminaire fitting 24 W suitable for ceiling cutout dia 175 mm round dia in powder coated white finished with drop down PC diffuser with optimized heat sink for efficent heat dissiption with replaceable electronic driver Make - Havells modle Rise Cat part No INTEGRANEODLR24WLED857 or equivalent in CG/Philips/HPL

Supply & fixing in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cables stranded conductor flat or circular 6 Sqmm complete all as specified and directed.

Supply & fixing in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cables stranded conductor flat or circular 10 Sqmm complete all as specified and directed.

Adinath Technical Services

M/s. ANAND ENTERPRISES

Suchit constructions

Saiprabha Construction