138WE/L-132/2025-26

Demolition of cement concrete (un reinforced ) in ground floors and pavings not exc 15cm thick (below or above ground level ) and removing debris off the premises complete all as specified and as directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting any gauge or thickness including nainital or similar pattern complete all as specified and/ or as directed by Engr-in-Charge.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and/ or as directed by Engr-in-Charge.

S&F 0.63mm thick black, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and/ or as directed by Engr-in-Charge.

Preparation of newly or previously untreated steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and/ or as directed by Engr-in-Charge.

M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and not exc 25 sqcm in section including dismantling, complete all as specified and/ or as directed by Engr-in-Charge.

M&L for 2nd class soft wood clean sawn as in beading for edges of Ceiling, lining or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section including dismantling complete all as specified and/ or as directed by Engr-in-Charge..

M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in wall panelling, shelves/boarding including dismantling complete all as specified and/ or as directed by Engr-in-Charge.

All as per serial item No. 17 above, but as in ceiling.

M&L 6mm (5 Nos. ply) thick veneered decorative (Knotty Pine) plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work, including dismantling complete all as specified and as directed.

All as per serial item No. 19 above, but as in ceiling.

M & L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:4 screed bed or bedding layer of mortar and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed

M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated , including backing with thermocol sheets or as specified by manufacturers including dismantling all as specified and directed.

M & L for 75 mm PCC 1:2:4 type B-1 using 20mm graded aggregate as plinth protection finished even and smooth with out using extra cement complete all as specified and/ or as directed by Engr-in-Charge.

M&L forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in plinth protection.

S&F 3-layer PP-R Polypropylene random copolymer) pipes 25mm dia SDR 7.4 (PN 16) stabilized and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain an brass threaded polypropylene random fittings fixed complete to wall, ceiling or in floor etc. all as specified and directed.

S&F in repairs vitreous China squatting pan or Orissa pattern 580 x 440 mm white with integral foot rest (excluding cistern and flush pipe) but including connection to 100mm dia trap 'P' or 'S', anti syphonage pipe etc complete all as specified and as directed by Engr-in-Charge.Make : Cera/Jaquar or equivalent approved make as approved by GE.

Supply only 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level, white, with inlet, ball valve, float and handle including bracket & flush pipe of polyethylene of low or high density or high density or PVC, 32mm dia, for low level cistern complete all as specified & directed by Engr-in-charge.

Taking down carefully sub main wiring/service wire of any description complete all as specified and directed.

One light/exhaust fan point controlled by one way switch complete all as specified and directed.

Point wiring complete with 1.5Sq.mm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead all as specified and directed for the following:-

One switch socket outlet 6 Amps, 230 volts point on independent board complete all as specified and directed.

Supply and fix switch piano flush button single pole 6 Amps 230 volts one way complete all as directed.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth, for foundation, laying of cable etc or for shafts, wells cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5m in depth in hard/ dense soil and getting out, complete all as specified and as directed.

Supply, laying and testing cable XLPE in replacement Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 4 core.

Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and directed by Engr in Charge.

M&L for Sand cushioning to under ground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, 2009. Note : Punned thickness only will be measured and paid.

Supply and laying of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-1 flat size 250 mm x 150 mm x 40mm, complete all as specified and directed.