Improvement works by Aluminium partition for AE / Urban Central Section and increasing the floor Level Height with PCC at the Central Section office building at Tuticorin.

Amount

Dismantling the existing brick masonry for the required height including cost of all labours, lead, lift, t & p, etc., complete.

Dismantling the existing damaged Carboard Partition from the site as directed by the engineer at site including cost of all labours, lead, lift,t & p, etc., complete.

Removing the existing door / windows including removal of frames, shutter frames, glass panels, hinges & fastenings, etc., for refixing safely including cost of all labours, lead, lift, t & p, etc. complete.

Filling with Quarry Dust for filling in Ground level with watering and consolidation including cost of all materials, labours,lead,lift,etc. complete.

Filling with M.Sand for filling in foundation & basement with watering and consolidation including cost of all materials,labours,lead,lift,etc., complete.

Providing PCC 1:4:8 for foundation with 40mm size machine crushed HBG metal including plasticiser at the rate of 100 ml per bag of cement, all other materials, labours, lead, lift, curing, etc. complete.

Brick work in CM 1:5 using class-II chamber burnt bricks and OPC 53 grade cement including plasticiser at the rate of 100 ml per bag of cement, all other materials, labours, lead, lift, curing, etc. complete.

Plastering in walls with OPC 53 grade cement C.M.1:5, 12 mm thick including plasticiser at the rate of 100 ml per bag of cement, all other materials,labours,lead,lift,curing,etc. complete.

Supplying and fixing in position of Aluminium Anodised partition glazed with 6 mm tk. Pinknitted glass using Aluminium box section 63.50 x 38.4 x 1.95 mm @ 1.094 kg / m section at vertical and horizontal members. The vertical members spaced at 1.00 m c/c and horizontal members spaced at about 0.65m c/c above brick 0.12 thk. partition wall upto roof ceiling with necessary glazing clips, rubber beeding, L angles with necessary making holes in Floors/walls and make good to the original condition after fixing the partition including cost of all materials, labour, lead, lift, etc. complete as directed by the Engineer at site.

Supplying and fixing in position of single leaf door half glazed & half PLB in Aluminium anodised section 101.06 x 44.75 x 2.40 mm box section for outer frame and using sections 83.50 x 44.45 x 2.40 mm for vertical, 50 x 44.45 x 2.50 mm for top & middle and 101.06 x 44.75 x 2.40 mm for bottom and the door shutter covered with 12 mm thk. exterior grade both sides decorative finished pre - laminated MDF board at bottom & 5.50 mm thk. plain glass at top with all necessary fixtures such as handles, hinges, locking arrangements, namatha beading, stay rods, L angles, aluminium clips, rubber beading etc. complete as directed by the Engineer at site.

Labour charges for refixing the existing windows along with frames in positon safely including cost of replacing the damaged materials,labours, lead,lift, scaffolding charges, t & p, etc., complete.

Supplying, jointing and fixing in position of 110mm(4kg/cm2) PVC pipes (ISI make) including cost of specials bend with inspection door, whereever necessary T.W. plugs including cost earth work excavation of all lead,lift,labour charges etc.,