Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.0 Cr
EMD Value
₹2.0 L
Closing Date
23 Feb 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Construction of 24x7 PHC Building at Kamsara of Tarava Block under National Health Mission in the Sonepur district of Odisha (Scope of work in addition to above is uploaded separately along with this NIT)
NBCC/ODISHA/ZO/NHM/NIT/22-23/37
NBCC/ODISHA/ZO/NHM/NIT/22-23/37
Open Tender-Domestic
Civil Works General
Sonepur, Odisha
₹11,800
₹2.0 L
23 Feb 2023
8 Feb 2023
23 Feb 2023
23 Feb 2023
9 Mar 2023
watering with all leads & lifts including cost of
all labour,T&P completed as directed by the
Engineer-in-charge.
Supplying and filling sand in foundation and
over areas including watering, ramming,
consolidating and dressing, labours, tools,
taxes etc. all complete as per the specification
and direction of Engineer-In-Charge.
Diluting and injecting chemical emulsion for
PRE CONSTRUCTIONAL Anti-termite treatment
and creating a continuous chemical barrier
under and all-round the column pits, wall
trenches, basement excavation, top perimeter
6 2 of building, expansion joints, over the top Sqm 666.87 162.84 1,08,593.11
surface of consolidated earth on which apron is
to be laid, surroundings of pipes and conduits
etc. complete as per specifications (plinth area
of the building at ground floor only shall be
measured for payment).
Providing and laying plain cement concrete
1:3:6 (1 cement : 3 sand : 6 stone agregate
7 2 40mm nominal size) as levelling course in floor Cum 38.83 5741.17 2,22,929.71
and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Providing and laying plain cement concrete
1:2:4 (1 cement: 2 sand: 4 stone aggregate
12mm nominal size) as levelling course in
foundation and plinth etc. including
tempering, curring, shuttering etc.complete all
depth and height.
First class Fly ash Brick masonry using bricks
of size 25 cm. x 12 cm. x 8 cm. having
crushing strength not less than 75 kg. Per. Sqr.
Cm. in cement mortar of mix( 1:6) with
ordinary Portland slag cement(PSC) and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in water
before use in Foundation & Plinth including
splays cutting, circular moulding, corbelling,
chamfering and similar such type of works,
watering and curing etc. including cost,
conveyance, loading, unloading, royalties and
taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the
works etc. complete in all respect as directed
by the Engineer-in-Charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Fly Ash. brick masonry of size 25 cm. x 12 cm.
x 8 cm. having crushing strength not less than
75 kg. Per Sqr. Cm. in cement mortar of mix
(1:6) with approved grade cement and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in water
before use in Superstructure including splays
10 2 cutting, circular moulding, corbelling, 0.00
chamfering and similar such type of works,
watering and curing etc. including cost,
conveyance, loading, unloading, royalties and
taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the
works etc. complete in all respect as directed
by the Engineer-in-charge
Half brick work with Fly Ash brick masonry in
cement mortar (1:4) in super structure having
a crushing strength of not less than 75
kg./sqcm with dimensional tolerance ± 2%
including splays cutting circular moulding
chamfering and corbelling and similar such
type of works with all necessary projections
watering and curing after immersing the bricks
in water at least for six hours before use
including cost, conveyance, royalties and taxes
of all materials with all labour,labour cess and
T & P required for the work complete in all
respect as per direction of Engineer-in-Charge.
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-20 grade as
per approved designs and drawings having a
minimum compressive strength (in work test)
200 Kg. / Square cm. in 15 cm. cubes at 28
days after mixing and test conducted in
accordance with I.S. 516 using 12 mm. to 20
mm. size black hard crushed broken granite
stone chips and screened and washed sharp
sand for mortar of approved quality from
approved quarry, washed and cleaned (
20mm. size chips not to exceeds 25 % ) to be
mixed in concrete mixture with Portland slag
cement (PSC) including hoisting, lowering,
laying and compaction concrete by using
vibrators, watering and curing for 28 days,
centering and shuttering then after dismantling
and removing debris from the work site and
finishing the exposed surface smooth providing
grooves or beads wherever necessary including
cost, conveyance, loading, unloading, royalties
and taxes of all materials and cost of all
labours, sundries, T & P required of the work
etc. complete in all respect as directed by the
Engineer-in-Charge. But excluding cost and
conveyance of M.S. rods or Tor steel and
binding wires and labour charges for
straightening, cutting, bending etc. of M.S.
rods or tor steel tying the grills and placing in
proper position.
16 2 Ground floor 0.00
18 2 b) Column up to plinth Cum 18.87 13434.54 2,53,464.06
20 2 f) Column above plinth Cum 19.87 13434.54 2,66,905.34
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
25 2 Terrace floor 0.00
Cutting, straightening coiled or bent up M.S.
Rod or tor steel of SAIL/ TATA / RINL (VIZAG)
make including bending, binding, welding and
joining if necessary and tying the grills and
placing in position as required for R.C.C. Work
and for providing fan hooks as required,
hoisting, lowering, laying including cost,
conveyances, taxes of M.S. Rod or tor steel
and binding wires of 18 to 20 gauge and
labour required for the work for bending,
binding and tying the grills in all floors (Linear
measurement will be taken and quantity will be
calculated basing on the standard weight of
B.I.S. for M.S. Rods or tor steel only. Wastage
if any, including weight of binding wire will not
be considered for measurement) etc. complete
as per specification & direction of Engineer-in-
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1
33 2 cement : 6 fine sand) including necessary 0.00
scaffolding, curing etc. all complete at all floors
and all heights.
16mm cement plaster to inside of brick
surfaces with cement mortar of mix 1:6 (1
36 2 cement : 6 fine sand) including necessary 0.00
scaffolding, curing etc. all complete at all floors
and all heights.
38 2 Terrace floor Sqm 35.03 259.72 9,098.57
6 mm cement plaster on RCC surfaces at
ceiling/slab soffit and other locations with
cement mortar of mix 1:4 (1 cement : 4 coarse
sand) including necessary scaffolding, curing
etc. all complete at all floors and all heights.
41 2 Terrace floor Sqm 20.34 204.14 4,152.21
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.40 sqm. (20mm thick) of
approved make in floors laid on 20 mm thick
cement mortar (1:4) (1 cement : 4
course sand) and filling joints with slurry
including cost of all materials, labour T&P etc.
required for the work all complete incl. rubbing
as per direction of the Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.10 Sqm & up to 0.4 sqm
(10mm. thick) of approved make in dadoes laid
on 12 mm thick cement mortar (1:3)
44 2 (1 cement : 3 course sand) and filling joints 0.00
with slurry including cost of all materials,
labour T&P etc. required for the work all
complete incl. rubbing as per direction of the
Engineer-in-charge.
Supplying, fitting & fixing of 8-10 mm thick &
size of 600x600 mm vertified floor tile of
matt finish with veilcraft (VC/FT ) shield(
Scratch free/stain free) with water absorption
limit between 0.08% to 3% and conforming to
IS : 15622:2006 (Group B Ib). laid on 20 mm
thick cement mortar (1:4) (1 cement : 4
46 2 course sand) and filling joints with white 0.00
cement of approved quality including cost of all
materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge (for New Work only )
Supplying, fitting & fixing of 8-10 mm thick
and size of 600x600 mm vertified wall tile of
in dadoes, skirting and risers of steps of laid
on 12 mm thick cement mortar (1:3) (1
cement : 3 course sand) jointed with slurry
48 2 mixed with pigment to match the shades of the 0.00
tiles etc. complete including cost of all
materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge.
Providing and fixing seasoned sal wood work in
frames at any locations including doors,
windows,cupboard, clerestory and other frames
fixing in position including cost of hinges, M.S.
flat (30mm x 6mm) hold fasts lugs or dash
fasteners of required dia and length as per
drawing / specification, at all floors and all
Factory made 30mm/32mm flush door shutter
(Laminates both side of frame) with all labour,
iron fittings, and wooden hinged cleats etc
fitted and fixed complete in all respect.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Providing & fixing of Factory fabricated
WINPLUS® Aluminium Door Systems - For
sliding windows, made from 6063 alloy and T-
6 tempered aluminium profile, in approved
shade of hybrid /purepolyster surface coating
(50-60micron Powder Coat), mechanically
mitred & jointed with casted / aluminium
extruded corner cleats along with Sliding
window Flush Lock, Bearing Rollers ,
Siliconised Weather strip and 5mm ET 125
toughened glassas infill shall be fitted into
54 2 Shutter using siliconised microwave treated 0.00
EPDM gaskets excluding taxes of all materials
and cost of all labours required for the work
etc. complete in all respect as desired by the
Engineer in charge. Note - conveyance, T&P
and scaffolding are not included herein.
Providing and fixing factory made 2 track 2
panel KOMMERLING uPVC white colour sliding
window comprising of uPVC multi-chambered
frame having section Frame 58mm x 49mm,
Window sash: 37mm x 61mm, made out of
lead free green profiles with corners fusion
welded, fully reinforced with Galvanized steel
1.5/2.0 mm. The windows profile should fulfill
the requirements of Viny 2010. The physical
properties of the profiles like Vicat softening
temperature, density, tensile strength,
hardness, weatherability, impact strength and
Modulus of Elasticity should be tested in
accordance with ASTM/DIN-ISO standards and
the thermal conductivity as per IS standards.
The window comprising of uPVC extruded
56 2 glazing beads of appropriate dimension, EPDM 0.00
gasket, G.I fasteners 100 x 8 mm size for
fixing frame to finished wall, plastic packers,
plastic caps and necessary stainless steel
screws etc. After fixing frame the gap between
frame and adjacent finished wall shall be filled
with weather proof silicon sealant over backer
rod of required size. The sash will be fitted with
5mm clear glass ( float ).complete in all
respect as per specification and direction of the
Engineer in Charge. etc. complete
Supplying and Fixing of M.S. Grills, M.S.Doors,
M.S. Gate etc including cost,conveyance of all
materials,priming,and labour for fitting fixing
etc.complete as per the instruction of Engineer-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Priming one coat with wall cement primer
(water bound) to make an even finished
surface in all floors and heights to wall surface
of approved make and shade including sand
papering, applying putty wherever necessary &
cost of scaffolding, staging charges with cost,
conveyance, taxes of all materials, cost of all
labour,labour cess T&P etc. complete as per
the direction of the Engineer-in-charge.
Painting two coats with approved anti-fungal
weather seal paints (ISI) of approved colour,
shade on wall surface over a coat of wall
primer(ISI) water bound including sand
65 2 papering, polishing the surface, cost, 0.00
conveyances of all materials and cost of all
labour,labour cess with T&P etc, complete as
per specification & direction of Engineer-in-
Finishing plastered surfaces of walls with
cement based wall putty (Water based) of
approved make and finishing the surface
smooth and even by sand papering to receive
painting in walls, at all heights with staging
68 2 wherever necessary with cost, conveyance, 0.00
taxes of all materials, cost of all
labour,labourcess, all T&P etc. required for the
work complete in all respect as per the
direction of the Engineer-in-charge.
Painting two coats with approved plastic
emulsion paint over a coat of wall primer of
make Dulux / Berger / Asian to inside surface
of walls finished with Acrylic Wall putty (water
based) of make (Birla / JK) and finished
smooth & even surface to receive painting
71 2 using roller to the final coat including cost of 0.00
scaffolding staging charges with cost,
conveyances, taxes of all materials, cost of
labour, T&P required for the work etc. complete
for all floors as per specification & direction of
the Engineer-in-charge.
Note :- Sample of Paint & Primer shall be
approved before procurement
Ground floor and use.
73 2 Terrace floor Sqm 55.37 100.54 5,566.68
Painting two coats with approved Enamel Paint
74 2 on wood work over a coat of Wood Primer in 0.00
Painting two coats with approved Enamel Paint
on Steel work in Ground Floor
78 2 Terrace floor Sqm 4.01 173.22 694.63
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Supplying, fitting and fixing of Stainless steel
of 304 grade in hand ralling using 50mm dia of
2mm thick circular pipe with Balustrade of size
32mm X 32mm X 2mm @ 0.90mtr. C/C and
stainless square pipe bracing of size 32mm X
32mm X 2mm in 3 rows in stair case as per
approved design and specification, buffing,
polishing etc with cost, conveyance, taxes, all
materials, labour, T&P etc. required for the
complete in all respect.
2.5 cm thick grading concrete (1:2:2) on roof
slab with 6.7mm & down grades size hard
81 2 granite crusher broken chips on new work in 0.00
83 0 Sub-Total of Civil Works 0 0.00 0.00 1,40,04,620.99
84 1 Plumbing Works 0 0.00 0.00 0.00
Supplying all materials , labour, T&P and fixing
rotational moulded polyethylene cylindrical
vertical water storage tanks conforming to
IS:12701/1996 including cutting holes through
the tank and fixing mild steel tubes and fittings
and providing extra sockets and jam nuts, fixing
ball valve etc. including hoisting upto a height of
5 metres above ground level and placing the tank
to the required position and providing 5.40 mtr.
lengthx0.25 mtr width KB brickwork in cement
mortar (1:6) of 0.46m height in staging and
0.13mtr thick circular protection wall of 0.46mtr
height to support the tank,12mm thick cement
85 2 plaster in cement mortar (1:6) over brick work, 0 0.00 0.00 0.00
RCC slab of size 1.60mX1.60m and 0.10m thick
,RCC beam of 0.25mx0.30m and 3.40m average
length in cement concrete (1:2:4) using 12mm
size crusher broken hard black granite chips and
required steel reinforcement including centering
and shuttering,watering,curing ,cost of all
materials,conveyance of all materials to worksite
, payment of royalty, all taxes etc.all complete as
per approved drawing , P.H. specification and
direction of Engineer-in-charge
2000 liters capacity PVC water storage tank
supplying all materials, labour, T&P and cutting
holes through existing brick work including
making good the damages in cement mortar
(1:4) for taking G.I. Pipes and fittings/ P.V.C.
87 4 pipes and fittings including watering, curing, cost Each 16.00 54.52 872.26
& conveyance of all materials to worksite,
payment of royality, taxes etc. all complete as
per direction of Engineer-in-charge.
Supplying all materials , labour, T&P and cutting
holes in RCC floors and roofs upto 19cm thick
for passing P.V.C pipes and G.I fittings etc. , and
repairing the holes after insertion of pipe etc. with
cement concrete (1:2:4) including finishing
complete so as to make it leak-proof as per P.H.
specification and direction of Engineer-in-charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and cutting
grooves in pucca floors and walls for taking
G.I./P.V.C. pipes and making good the damages
89 6 including watering , curing , cost & conveyance Mtr 50.00 201.66 10,083.10
of all materials to worksite, payment of royality,
taxes etc all complete as per direction of the
Engineer-in-charge.
Supplying all materials, labour, T&P and fixing
vitreous china water closet, squatting pan (Indian
type W.C pan/Orissa pattern squatting pan) duly
embedded in cement concrete (1:5:10) using
4cm size hard granite metal including fixing a pair
of vitreous china 250mm x 130mm x30mm
footrest, fixing 100mm dia HCI 'p' or 's' trap
(with/without 50mm dia horn) for water colset 0 0.00 0.00 0.00
squatting pan including jointing the trap with pan
in cement mortar (1:1) cutting the floor and
mending good the damages , cost & conveyance
of all materials to worksite, payment of royality ,
taxes etc. all complete as per P.H specification
and direction of the Engineer-in-charge.
91 8 580mm size Orissa pan Each 4.00 2940.80 11,763.18
Supplying all materials , labour, T&P and cutting
holes through existing brick or laterite masonry
wall for taking U-PVC pipes and fittings
including making good the damages etc. all
complete as per P.H. specification and direction
of Engineer-in-charge
Supplying all materials , labour, T&P and cutting
of RCC chajja for taking HCI or U-PVC pipe and
fittings including making good the damages etc.
all complete as per P.H. specification and
direction of Engineer-in-charge
Supplying all materials labour T&P filling sand in
94 11 lavatories well watered and rammed including 0 0.00 0.00 0.00
lead of materials to work site.
Supplying all materials, labour, T&P and
providing cement concrete ( 1:2:4 ) with 12mm
size crusher broken hard black granite chips
including watering, curing,cost of all materials,
conveyance of all materials to work site with
payment of royalty, all taxes etc all complete as
per P.W.D specification and direction of
Engineer-in-charge
Supplying all materials, labour, T&P and
providing and fixing ceramic tiles in floors,
treads or steps and landing on 25mm thick bed
of cement mortar (1:1) ( 1 cement : 1 sand )
jointed with neat cement slurry mixed with
pigment to match the shades of the tiles
including watering, curing,cost of all materials,
98 15 conveyance of all materials to work site , 0 0.00 0.00 0.00
payment of royalty, all taxes etc all complete as
per P.W.D specification and direction of
Engineer-in-charge ( ceramic floor tiles of
premium grade having thickness 7mm to 8mm
conforming to IS 13755 of size 30cmx30cm to
be pre-approved by the Engineer-in-charge )
100 17 Ground floor Washrooms Sqm 44.27 1418.01 62,775.13
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Supplying all materials,labour,T&P and providing
12mm thick cement plaster(1:4) on brick work
including watering,curing,cost of all materials,
101 18 conveyance of all materials to worksite,payment 0 0.00 0.00 0.00
of royalty,all taxes etc.all complete as per PWD
specification and direction of the Engineer-in-
Ground floor - (Qnty same as Wall Tiles in G.F)
Supplying all materials, labour, T&P and
providing and fixing porcelain glazed tiles in dado
skirting on 12mm thick cement plaster (1:3)
jointed with neat cement slurry mixed with
pigment to match the shades of the tiles
including watering, curing,cost of all materials,
conveyance of all materials to work site , 0 0.00 0.00 0.00
payment of royalty, all taxes etc all complete as
per P.W.D specification and direction of
Engineer-in-charge( ceramic wall tiles of
premium grade having thickness 6.5mm to
6.7mm conforming to IS 13753 of size
30cmx45cm to be pre-approved by the Engineer-
Providing fitting, fixing of Aluminium door with
anodized AL. door section of 9202 as vertical
member,9201 as top and 9200 as middle bottom
member with frame section No. 9221 and
106 23 tapered clip no. 4660 and the frame to be Sqm 24.57 6065.64 1,49,032.69
completed by means of jointing angle No. 1855
Including all Cost of Labour. T&P hire charges of
drilling machine. labour charges etc. complete.
Supplying all materials, labour, T&P and laying in
trenches (to level or slope) unplasticized P.V.C.
pipe conforming to IS 4985/2000 of the following
out side dia for class- 3 (0.60mpa ) including
jointing with supply of approved solvent cement
by non-heat application method/as per
manufacture's specification, provoding and laying 0 0.00 0.00 0.00
in trench cement concrete (1:4:8) with 40mm
size hard granite metal in the type C-1 standard
bedding surrounding or encasing including
concrete for bedding and curing etc all complete
as per P.H. specification and direction of the
Engineer in charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Supplying all materials ,labour ,T&P and
constructing Inspection Chamber of inside size
760mmx760mmx460mm with cement concrete
(1:3:6) using 40mm size crusher broken hard
black granite metal on bed , KB brick work in
cement mortar (1:6) in foundation and plinth,
moulding and shaping the channel inside and
benching with cement concrete (1:2:4) using
12mm size crusher broken hard black granite
chips, 12mm thick cement plaster (1:3) with
110 27 cement punning to inside, cement flush pointing 0 0.00 0.00 0.00
(1:3) to outside, R.C.C cover slab (1:2:4) using
12mm size crusher broken hard black granite
chips with R.C.C man hole cover, earth work in
excavation in all kinds of soil and refilling the
cavity around the chamber including
watering,curing,cost of all materials, conveyance
of all materials to worksite, payment of royalty,all
taxes etc.all complete as per approved drawing,
P.H specification and direction of Engineer-in-
Inside size 76cmx76cmx46cm with 18” dia RCC
Supplying all materials labor T&P and
constructing MH chamber of sizes earth work in
excavation in all kinds of soil CC(1:1:8) with
black granite chips size 46mm brick work with
K.B. brick having crossing strength not less than
C.P(1:8) inside MH chamber over benching with
cement slush pointing (1:3)outside the MH
112 29 chamber providing painting MS or CI step iron 0 0.00 0.00 0.00
RCC(roof of slab with CC(1:2:4)with black
granite chips size 12mm bending binding tying
the grills placing of the reinforcement providing
RCC color of required size refilling the cavity
around the MH chamber with excavated earth
including channeling the bed of MH etc all
complete as per PH specification.
MH size 0.91m x 0.91 m with 0.45 m (18” dia
Supplying all materials labour T&P and
constructing 1.40m dia x 2.00 m deep soak way
pit with dry brick having crossing strength not
less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for
the remaining 0.4572mm height of wall at top
CC(1:3)inside and outside inside fill with dry
brick khoa size 38mm ,CM thick RCC perforated
114 31 slab to a height of 1.9012m from bottom covered Each 2.00 22144.35 44,288.70
by means of 50mmthick RCC wall cover in
pieces filled with iron plugs including earth work
in excavation refilling of cavity around the pit and
painting the iron works complete as per PHD
design and specification including carriage of all
materials to site.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Supplying all materials ,labour ,T&P and
constructing gully trap chamber of inside size
250mmx250mm with 8cm thick RCC precast
cover slab in cement concrete (1:2:4) mix using
12mm size crusher broken HG chips, foundation
concrete (1:4:8) using 40mm size crusher
broken HG metal on bed and around trap, KB
115 32 brick work in cement mortar (1:6) in foundation Each 6.00 1647.04 9,882.26
and plinth and inside 12mm thick cement
plastering (1:3) finished with a floating coat of
neat cement including fixing 100mmx100mm size
HCI gully trap, 150mmX150mm size CI grating
etc.all complete as per drawing, specification
and direction of Engineer-in-charge
116 33 2 no 50 users RCC septic tank 0 0.00 0.00 0.00
Earth work in excavation of foundation in all kinds
of soil within 50m initial lead and 1.5m initial lift
including rough dressing & breaking clods to
117 34 maximum 5cm to 7cm and laying in layers not Cum 55.89 249.40 13,939.23
exceeding 0.30m in depth and as per direction of
the Engineer-in-Charge.
Extra lifts of 1.50 mtr or part thereof over the
initial lift of 1.5 mtr in all kinds of embankments
and road works and ordinary earthwork in
Supplying all materials, labour, T&P and
providing shoring and shuttering foundation
119 36 trenches, pits etc with close wooden planks or Sqm 91.58 320.61 29,361.10
sheets shuttering etc all complete as per
direction of the Engineer in charge.
Supplying all materials, labour, T&P and filling in
foundation and plinth with sand well watered and
rammed including conveyance of all materials to
worksite, payment of royalty, taxes etc.all
complete as per direction of the Engineer in
Supplying all materials, labour, T&P and
providing cement concrete (1:3:6) with 4cm size
hard granite metal including watering, curing,
121 38 conveyance of all materials to worksite, payment Cum 6.16 5515.79 33,977.28
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
Supplying all materials, labour, T&P and
providing cement concrete (1:1.5:3) with 12mm
size hard broken granite chips for R.C.C works
including hoisting, laying, watering, curing,
conveyance of all materials to worksite, payment
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
Supplying all materials, labour, T&P and
providing M.S reinforcement for R.C.C work
including cutting, bending, binding, and tying the
grills and placing in position including cost of
123 40 binding wire 18 to 20 gauge, conveyance of all Qntl 32.70 10156.97 3,32,132.85
materials to worksite, payment of royalty, taxes
etc all complete as per specification and direction
of the Engineer in charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing rigid and smooth centering and
shuttering for R.C.C works including false work
and dismantling them after casting including
conveyance of all materials to worksite, payment
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
R.C.C floor and roof slabs, landings, balconies,
125 42 projecting sunshades and chajjas up to 4.30 mt Sqm 16.00 515.54 8,248.67
R.C.C beams,columns,girder and bressmer etc.
Supplying all materials, labour, T&P and
providing 6mm thick cement plaster (1:4) on
RCC work including watering, curing,
127 44 conveyance of all materials to worksite, payment Sqm 79.36 188.56 14,964.44
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
Supplying all materials, labour, T&P and
providing cement punning including watering,
curing, conveyance of all materials to worksite,
payment of royalty, taxes etc all complete as per
specification and direction of the Engineer in
Supplying all materials, labour, T&P and
providing 12mm thick cement plaster (1:4) on
brickwork including watering, curing, conveyance
129 46 of all materials to worksite, payment of royalty, Sqm 10.56 182.43 1,926.44
taxes etc all complete as per specification and
direction of the Engineer in charge
Supplying all materials, labour, T&P and
providing brick work with K.B bricks having
crushing strength not less than 75kg/cm² with
dimensional tolerance ± 8 percent in cement
130 47 mortar (1:4) including watering, curing, Cum 1.20 5157.78 6,189.34
conveyance of all materials to worksite, payment
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
Supplying all materials, labour, T&P and making
MS step iron in 20mm diameter MS steel bars
and fixing into walls of man hole/septic tank duly
embedded in cement concrete (1:3:6) complete
as per specification and direction of the Engineer
Filling in foundation and plinth with excavated
materials, moorum including watering and
ramming as directed by the Engineer in charge
133 50 Pump House of size 8'-0''x8'-0'' (Internal) 0 0.00 0.00 0.00
Earth work in excavation of foundation in all kinds
of soil with in 1.5m initial lift including dressing
and leveling of bed and breaking the clods and
the excavated materials with in 50m initial lead as
per direction of Engineer in charge.
Supplying all labor T&P & filling sand in
foundation and plinth with well watered &
rammed etc. all complete as per direction of EIC.
Supplying all materials, labor T&P providing CC
(1:4:8) with 4 cm HG metal including watering
curing lead of all materials to site etc. complete.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Supplying all materials labour T&P and providing
1st class Fly Ash brick work in CM (1:6) in F&P
including watering and curing and lead of
materials to site.
Supplying all materials, labour, T&P & providing
2.5cm thick D.P.C. flooring with cement concrete
(1:2:4) 12mm hard broken granite chips
138 55 including conveyance of all materials, watering Sqm 4.03 344.09 1,386.67
curing payment of royalty taxes etc. all complete
as per direction of Engineer-in-charge.
Supplying all materials, labor T&P providing CC
(1:2:4) with 4 cm HG metal including watering
curing lead of all materials to site etc. complete.
Supplying all materials labour T&P and providing
1st class Fly Ash brick work in CM (1:6) in
Super Structure including watering and curing
and lead of materials to site.
Providing C.C. (1:1½:3) with 12mm size hard
granite chips of RCC work including hoisting
and laying and curing with lead of all materials to
Supplying all materials, T&P and providing MS
reinforcement for RCC work including cutting,
142 59 bending, binding and tying the grills and placing Qtl 1.22 10156.97 12,391.50
in position including cost of binding wire 18 to 20
Supplying all materials labour T&P and providing
12mm thick C.P (1:6) including watering curing
and conveyance of all materials to site.
Rigid & smooth centering & sheltering for RCC
work including falls work & dismantling than after
casting including cost of materials in ground
RCC floor, roof slab chhaja up to 4.430 m height
Supplying all materials, labour, T&P & providing
2.5cm thick A.S. flooring with cement concrete
(1:2:4) 12mm hard broken granite chips
146 63 including conveyance of all materials, watering Sqm 5.76 356.71 2,054.67
curing payment of royalty taxes etc. all complete
as per direction of Engineer-in-charge.
Supplying all labor T&P & filling foundation and
plinth with excavated materials well watered &
rammed etc. all complete as per direction of EIC.
Supplying all materials labour T&P providing on
two coats of white washing ceiling
149 66 Same as Plaster Area Sqm 62.15 14.63 909.38
Supplying fitting, fixing in position angle iron
window frame made out of 35mm x 35mm x
5mm, M.S. angle with required nos. of hinges
and steel shutter made out of 25mm x 25mm
x3mm, M.S. angle fitted with 20 gauge G.P.
sheet/ steel plate and welded with tower bolt,
handle hold fast & M.S. flat of 19mm x 3mm & K.G. 103.00 101.57 10,462.16
welded with entire grill on windows and one coat
of red oxide primer and fixing with C.C. (1:3:6)
using 12mm size HBG CB Chips and making
good to the damages and finishing the exposed
surface smooth with watering curing etc. as per
direction of the Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing and fixing to wall or ceiling and floor
PVC pipes conforming to ASTM-D-1785/89 of
the following nominal bore, tube fittings and
clamps including making the wall good. ceiling
and floor, testing all complete as per specification
and direction of the Engineer in
charge.(Oriplast/Supreme/Finolex)
152 69 20mm dia PVC ASTM pipe (sch-80) Mtrs. 50.00 160.36 8,018.10
153 70 25mm dia PVC ASTM pipe (sch-80) Mtrs. 150.00 220.54 33,081.30
154 71 32mm dia PVC ASTM pipe (sch-80) Mtrs. 80.00 289.93 23,194.08
155 72 40mm dia PVC ASTM pipe (sch-80) Mtrs. 75.00 381.26 28,594.35
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes conforming to IS:15778,
having thermal stability for hot & cold water
supply, including all CPVC plain & brass
threaded fittings including fixing the pipe with
clamps at 1.00 m spacing. This includes jointing
of pipes & fittings with one step CPVC solvent
cement and testing of joints complete as per
direction of Engineer-in-Charge
Supplying all materials, labour T&P and fitting
and fixing brass/CP fittings of the following
nominal bore with supply of all joiniting materials
158 75 including cost & conveyance of all materials to 0 0.00 0.00 0.00
worksite, payment of taxes etc. all complete as
per P.H specification and direction of the
Engineer-in-charge.
159 76 15mm dia CP angle stop cock Each 26.00 1016.33 26,424.68
160 77 15mm dia CP two in one bib cock Each 6.00 1480.90 8,885.40
161 78 15mm dia CP Bib cock Each 6.00 1306.73 7,840.39
162 79 15mm dia CP Long Body Bib cock Each 16.00 1713.24 27,411.87
163 80 15 mm dia CP Bib cock Elbow Action Each 10.00 2700.43 27,004.30
164 81 20mm dia CP concealed stop cock Each 4.00 894.56 3,578.23
165 82 25mm dia brass full way valve Each 8.00 1094.21 8,753.71
166 83 32mm dia brass full way valve Each 10.00 1601.85 16,018.50
167 84 40mm dia brass full way valve Each 4.00 2034.32 8,137.28
168 85 15mm dia CP Health faucet Each 6.00 1945.47 11,672.80
169 86 15mm CP Extension piece Each 64.00 69.97 4,478.34
171 88 15mm size C.P. flange Each 64.00 47.55 3,043.46
Supplying all materials, labour, T&P and fitting
and fixing U-PVC SWR soil waste ventilating
pipes and fittings of the following outside
diameter conforming to ISI No 13592/1992 to
walls with nails, bobbins and wooden plugs or
laying in trenches including jointing with supply of
approved rubber lubricant by non-heat 0 0.00 0.00 0.00
application method/as per manufacturer's
specification, testing, earthwork in excavation in
all kinds of soil and refilling of trenches , cost &
conveyance of all materials to worksite, payment
of taxes etc. all complete as per P.H
specification and direction of the Engineer-in-
176 93 110mm U-PVC Plain bend Each 20.00 273.76 5,475.20
179 96 110mm U-PVC offset without ear Each 20.00 480.73 9,614.64
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and fixing
the following vitreous china Wash Down Water
Closet (European type W.C pan) with integral
‘P’or ‘S’ trap to the floor with wooden plug and
chromium plated pedestal screws including
jointing the trap with soil pipe in cement mortar
(1:1), fixing plastic seat and cover for wash down Each 1.00 14170.27 14,170.27
water closet with chromium plated brass hinges
and rubber buffers including polishing etc all
complete as per specification and direction of the
Engineer in charge.SINGLE PIECE-WATER
COLSET P TRAP - LYS-WHT-0204P
Supplying all materials, labour, T&P and fixing
the following vitreous china Wash Down Water
Closet(European type W.C. pan)with integral 'p'
or 's' trap to the floor with wooden plug and
chromium plated pedestal screws including
jointing the trap with soil pipe in cement mortar
(1:1) fixing plastic seat and cover for wash down 0 0.00 0.00 0.00
water closet with chromium plated brass hinges
and rubber buffers including polishing , cost &
conveyance of all materials to worksite, payment
of royality, taxes etc. all complete as per P.H
specification and direction of the Engineer-in-
European water closet with 's' trap
plain(Hindware/Parryware/Neycer make)
Supplying all materials, labour T&P and and
fixing 12.50 liters/10 liters capacity low level
flushing cistern with a pair of cast iron or M.S.
brackets complete with fittings such as siphonic
arrangements 15mm nominal size brass/pvc ball
valve with polythene float CP brass
handle,unions and couplings for connection with
inlet, outlet and overflow pipes, 32mm dia CP
187 104 long flush bend, 15mm dia pvc inlet connection 0 0.00 0.00 0.00
pipe including cutting holes and making good the
same and connecting the flush bend with cistern
and closet and connceting the inlet pipe with
suupply main , cost & conveyance of all materials
to worksite, payment of taxes etc. all complete
as per P.H specification and direction of the
Engineer-in-charge
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia
188 105 CP long flush bend ( Slimline-white-Parryware Each 9.00 1844.22 16,598.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Supplying all materials, labour T&P and fixing
wash basins with hole for pillar taps with cast
iron or M.S.brackets painted white including
cutting holes in walls and making good the
damages with supply of wooden plugs, screws
and cement etc, fixing pedestal for wash basin
recessed at the back for the reception of pipes
and fittings, fixing PVC waste pipe of 32mm
nominal diameter for wash basin including brass
check nut complete, fixing pillar taps capstan
189 106 head screw down high pressure lettered 'Hot' 0 0.00 0.00 0.00
and 'Cold' with long screws, shanks and back
nuts of 15mm dia nominal bore, fixing 15mm dia
PVC inlet connection pipe and making
connection with pillar cocks and supply mains for
wash basin, fixing 32mm dia CP brass waste,
cost & conveyance of all materials to worksite,
payment of taxes etc. all complete as perP.H
specification and direction of the Engineer-in-
550mmx400mm W.H.basin
(Hindware/Parryware/Neycer make)with 15mm
dia C.P.pillar cock (Jaquar make) with
Supplying all materials, labour, T&P for fitting &
fixing Kitchen sink of all standard sizes with a
pair of bracket, C.P. waste, trap & P.V.C. waste
pipe & painting brackets including supply of
cement concrete & mortar etc. all complete. 24”
x 18” x 10” sink
Supplying all materials, labour, T&P and fixing
standard sized CP towel rail complete with CP
192 109 brass brackets fixed to wooden plugs with CP 0 0.00 0.00 0.00
screws as per specification and direction of the
Engineer in charge
193 110 25mmx600mm long CP towel rail Each 11.00 824.70 9,071.72
Supplying all materials, labour, T&P and fixing
standard sized glass-shelf with CP brass
brackets and guard rail complete fixed to wooden
plugs with CP screws as per specification and
direction of Engineer in charge.
196 113 600mmx125mm plate glass shelf Each 14.00 707.29 9,902.09
Supplying all materials, labour, T&P and fixing
mirror of superior glass mounted on 6mm.thick
A.C. sheet or ply wood sheet and fixed to
wooden plugs with CP screws and washers
complete as per specification and direction of
Engineer in charge.
600mmx450mm size B.E mirror (swivelled type)
Supplying all materials, labour, T&P and fixing
CP soap holder complete with CP brass
199 116 brackets fixed to wooden plugs with CP screws 0 0.00 0.00 0.00
as per specification and direction of the Engineer
Supplying all materials labor T&P & Fitting &
fixing CP shower with rim with supply of red lead
and yarn nail complete as per direction of
Engineer in charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing fitting and fixing (Aqua guard) pure chill
120 PSS UV of size 750 x 570 x 1350mm hight
with water storage capacity 120 liter's along with
203 120 3 noa of faucets 2 for cold water and 1 for normal 0 0.00 0.00 0.00
water including a flow of 1.5 ltr per munite etc all
complete as per approved drawing , specification
and direction of the Engineer in charge
204 121 Aqua guard pure Chill 120 PSS UV Each 2.00 119528.10 2,39,056.20
Construction of 1 nos production well including
scientific source finding through consolidated
and unconsolidated rock with down the ODEX
205 122 drilling rig with PVC, GI, MS pipe and installation 0 0.00 0.00 0.00
of submersible pump set with all accessories.
Labour for drilling a perfectly vertical bore hole of
specified dia for a specified depth below ground
level through consolidated and unconsolidated
rock with combination drilling rig as required to
suit the site condition as per the direction of
Engineer-in-charge including supply of own rig
with its accessories, tools and plant and
consumables etc. for lowering of 200mm
/150mm dia M.S. Pipe / PVC casing fitted with
socket and with or without well screen as per the
206 123 necessity for sub-medium hard and boulder 0 0.00 0.00 0.00
formation (M.S./PVC casing pipe if required to
prevent collapse of over burden is to be provided
by contractor including lowering and withdrawing
after completion of the tube well) 200mm dia x
400mm dia in over burden position inlcluding
packing of gravel supplied by Contractor for
400mm bore only etc as per direction of Engineer
207 124 Drilling for 200mm dia bore 0 0.00 0.00 0.00
210 127 Drilling for 150mm dia bore 0 0.00 0.00 0.00
Lowering the following size of G.I. / PVC / M.S.
housing pipe with or without slotted pipe as per
the necessity for ground level upto 45 mtr depth
and fitted and fixed up perfectly vertical position
including cutting and threading of pipes and
212 129 slotted pipes and supplying and fixing all jointing 0 0.00 0.00 0.00
materials, tools and plants etc all complete and
keeping the top of the casing pipe threaded
including plugging tube wells to prevent entry of
foreign materials.
Lowering 200mm dia M.S.ERW pipe casing pipe
cleaning and developing the tube well with supply
of compressor worked till clear and adequate
discharge in obtained from the tube well including
supply and use of all necessary equipment and
labour as per direction of Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Supplying all labour, materials and T&P for
providing sanitary sealing by cement concrete
grouting of annular space around M.S. casing
pipe uptp 5 mtr below groun dlevel to plug the
bore hole excluding cost of cement etc all
complete as per direction of EIC.
Supplying all materials, labour, T&P and
providing, fitting and fixing submersible pump
with squirrel cage induction type submersible
type submersible electric motor to run on 3
phase/1 phase line voltage ranging from 320 volt
to 450 volt conforming to IS: 8034/89 with
218 135 following specifications with suitable control 0 0.00 0.00 0.00
panel, jointing with GI/PVC/HDPE pipes,
electrification, testing, commissioning, trial
running, conveyance of all materials to worksite,
payment of taxes etc all complete as per
specification and direction of the Engineer in
2 H.P. Single phase/ three phase 7 stage
head renge of 20 to 35 mtr with discharge
219 136 capasity 145 to 110 L.P.M With outlet dia 25 mm Each 2.00 26373.00 52,746.00
220 137 DOL Control panel Each 2.00 4490.49 8,980.98
221 138 40mm dia steel short piece Each 2.00 179.71 359.43
223 140 50mm size CI bracket Pair 1.00 107.73 107.73
225 142 20mm dia rigid UPVC pipes Mtr 90.00 8.14 732.78
226 143 Steel rope with cover Mtr 90.00 31.51 2,835.54
Labour charges for lowering including
Supplying all materials, labour, T&P and
providing and fixing to wall or ceiling and floor
HDPE pipes and pipe fittings conforming to IS:
4984/2000 (10kgf/sqcm) of the following nominal
228 145 bore with clamps and jointing by Fusion welding 0 0.00 0.00 0.00
method including testing, making good the wall,
ceiling and floor all complete as per specification
and direction of the Engineer in charge
230 147 Sub-Total of Plumbing Works 0 0.00 0.00 34,50,672.30
231 1 Electrical Works 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Point wiring in Recessed wirring to light point/
fan point/ exhaust fan point/ call bell point with
1.5 sq.mm FRLSH/LSZH PVC insulated copper
conductor of ISI marked 20
mm dia PVC flexible non metallic conduit FRLS
type ISI marked with 6A modular type(( falme
retradant type)) switch ISI marked and ceiling
rose ISI marked of modular type G.I box with
metallic cover plate (both side) falme retradant
type), of suitable size, modular box with 1.5 sq.
Mm FRLS PVC insulated single core
232 2 multistandard copper conductor as earth wire 0 0.00 0.00 0.00
including all accessories and connection as per
direction of Engineer -in -Charge. CATAGORY AS
FOLLOWS ,complete suitable for
Office.(Maximum 02 nos point in one circuit).All
the switches & sockets should be warrantied for a
replacement period of 10 years against defects
with ncessary test report & Warrnaty certificate
to be submitted to the department for genuinity
of product & to avail free after sales service
within warranty period for acceptance of
Group control of point in Recessed wirring to
light point/ fan point/ exhaust fan point/ call bell
point with 1.5 sq.mm FRLSH/LSZH PVC insulated
copper conductor of ISI marked
20 mm dia PVC flexible non metallic conduit
FRLS type ISI marked with 6A modular type((
falme retradant type)) switch ISI marked , and
ceiling rose ISI marked of modular type G.I box
with metallic cover plate (both side) falme
retradant type) of suitable size, modular box
with 1.5 sq. Mm FRLS PVC insulated single core
236 6 multistandard copper conductor as earth wire Nos 15.00 1200.06 18,000.90
including all accessories and connection as per
direction of Engineer -in -Charge. CATAGORY AS
FOLLOWS ,complete suitable for
Office.(Maximum 02 nos point in one circuit).All
the switches & sockets should be warrantied for a
replacement period of 10 years against defects
with ncessary test report & Warrnaty certificate
to be submitted to the department for genuinity
of product & to avail free after sales service
within warranty period for acceptance of
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Supplying ,fixing of 6A Plug on the same board in
existing switch board with complete fitting by 01
no of 6A switch & socket (modular type)( ( falme
retradant type)) & other required accessories of
ISI marked as approved as per direction of Engg. -
in -Charge. , complete suitable for for
HOSTEL.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
237 7 warrantied for a replacement period of 10 years Nos 31.00 227.74 7,059.94
against defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free aftersales service within warranty period for
acceptance of materials.
Supplying,fixing of 6A Plug on the separate board
with complete fitting by 01 no of 6A switch &
socket(modular type)( ( falme retradant type))
with suitable size modular box & cover( falme
retradant type) including supplying of all
required accessories of ISI marked as approved
as per direction of engg-in-charge. , complete
suitable for Residence.(Maximum 02 nos point in
one circuit).All the switches & sockets should be
238 8 warrantied for a period of 10 years against Nos 66.00 597.08 39,407.28
manufacturing defects against which ncessary
test report & Warrnaty certificate to be submitted
to the department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Supplying,fixing of 1x16A Plug on the separate
board with complete fitting by 01 no of 16A
switch & socket(modular type)( falme retradant
type)) with suitable size modular box & cover(
falme retradant type) including supplying of all
required accessories of ISI marked as approved
as per direction of engg-in-charge.. (For
equipement power)All the switches & sockets
239 9 should be warrantied for a replacement period of Nos 12.00 758.74 9,104.88
10 years against defects with ncessary test
report & Warrnaty certificate to be submitted to
the department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Receass wiring for circuit/submain wiring with
the following mentioned size PVC FRLSH/LSZH
insulated, copper conductor, single core cable or
equievalant reputed make A catagory ISI marked
as approved, in recessed PVC conduit Heavy duty
240 10 FRLS of mentioned size as required as per 0 0.00 0.00 0.00
direction of Engg.-in-Charge. Ncessary test report
& Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free after sales service within warranty period for
acceptance of materials
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
2 nos single core 1.5 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5 sq.
mm copper wire for earth continuty conductor. In
20 mm dia non metallic heavy duty flexible
conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
2 nos single core 2.5 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5 sq.
mm copper wire for earth continuty conductor in
242 12 20 mm dia non metallic heavy duty flexible Mtr 233.00 169.92 39,591.36
conduit.(BDB to LSB/LIGHT CKT/5A
PLUG/INVERTER POINT TO EACH QTR)
4 nos single core 2.5 sq. mm copper wire for
phase and neutral and 02 nos of single core 2.5
sq. mm copper wire for earth continuty
conductor .in 25 mm dia non metallic heavy duty
flexible conduit(LDB to LSB/5A SOCKET)
2 nos single core 4 sq. mm copper wire for phase
and neutral and 01 no of single core 1.5 sq. mm
copper wire for earth continuty conductor in 20
mm dia non metallic heavy duty flexible conduit
.(PDB to PSB/ GAYSER POINT/AC POINT/ROOM
LIGHT CONTROL TO CORRIDOOR POINT/DG
PANEL ESSENTIAL LOAD) (2X4+1X1.5)
4 nos single core 4 sq. mm copper wire for phase
and neutral and 02 nos of single core 2.5 sq. mm
copper wire for earth continuty conductor in 32
245 15 mm dia non metallic heavy duty flexible Mtr 35.00 287.92 10,077.20
conduit.(PDB to PSB/GAYSER. POINT/AC
POINT/DG PANEL ACCL TO EACH QTR
ESSENTIAL LOAD) (4X4+2X2.5)
2 nos single core 6 sq. mm copper wire for phase
and neutral and 01 no of single core 2.5 sq. mm
copper wire for earth continuty conductor in 25
mm dia non metallic heavy duty flexible conduit
.(LFDB TO LBDB) (2X6+1X2.5)
4 nos single core 6 sq. mm copper wire for phase
and neutral and 02 nos of single core 2.5 sq. mm
copper wire for earth continuty conductor in 32
mm dia non metallic heavy duty flexible
conduit.(LFDB TO LBDB/power unit/point)
4 nos single core 10 sq. mm copper wire for
phase and neutral and 02 nos of single core 4 sq.
mm copper wire for earth continuty conductorin
32 mm dia non metallic heavy duty flexible
conduit .(LFDB TO FLOOR PANEL TO TPN BDB
light ) (4X10+2X4)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Supplying and fixing 20 amps, 240 volts, SPN,
industrial type socket outlet, with 2 pole and
earth metal enclosed plug top along with 32
amps. C-series, SP MCB, in sheet steel enclosure,
on surface or in recess, with chained metal cover
for the socket outlet, and complete with
connections, testing and commissioning etc. as
required as per direction of Engg.-in-Charge.. . All
249 19 the Components should be warrantied for a Nos 13.00 723.34 9,403.42
replacement period of 5 years against defects
with ncessary test report & Warrnaty certificate
to be submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
Supplying and fixing following size/ modules, GI
box along with modular base & metallic cover
plate (both side) plate for modular switches in
recess etc as required as per direction of Engg.-in-
Charge..All the Components should be warrantied
250 20 for a replacement period of 5 years against 0 0.00 0.00 0.00
defects with ncessary test report & Warrnaty
certificate to be submitted to the department for
genuinity of product & to avail free aftersales
service within warranty period for acceptance of
Supplying and fixing of following sizes of medium
class PVC FRLS conduit ISI marked along with
accessories in surface/recess including cutting 0 0.00 0.00 0.00
the wall and making good the same in case of
recessed conduit as required as per direction of
Engg.-in-Charge .
Supply and fixing modular type indicator on the
existing switch box/cover . Equievalant higher
model of equievalant reputed make & model A
catagory ISI marked as approved as required as
per direction of Engg.-in-Charge.All the
257 27 Components should be warrantied for a Nos 6.00 121.54 729.24
replacement period of 5 years against defects
with ncessary test report & Warrnaty certificate
to be submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
Supplying and installation of AC starter Modular
type, E equievalant reputed make & model A
catagory ISI marked as approved coil voltage-415
Volt A.C. & O/L range of 9-14A range on mod Box
of suitable size including modular coveras
required as per direction of Engg.-in-Charge .All
258 28 the Components should be warrantied for a Nos 13.00 724.52 9,418.76
replacement period of 5 years against defects
with ncessary test report & Warrnaty certificate
to be submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Supply and fixing CALL bell (Ding dong type)
/Buzzer on the existing switch box/cover. .as
required as per direction of Engg.-in-Charge.All
the Components should be warrantied for a
replacement period of 5 years against defects
with ncessary test report & Warrnaty certificate
to be submitted to the department for genuinity
259 29 of product & to avail free aftersales service Nos 6.00 240.72 1,444.32
within warranty period for acceptance of
S/F of Bakelite angle holder/batten holder of ISI
marked conforming to IS-1258/1987 in place of
ceiling rose as per direction of Engg.-in-Charge
.All the Components should be warrantied for a
260 30 replacement period of 5 years against defects EACH 21.00 70.80 1,486.80
with ncessary test report & Warrnaty certificate
to be submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
Supplying,fixing of Blanking plate(modular
type)( falme retradant type)) in existing switch
box(anti bactorial & falme retradant type)
including supplying of all required accessories
of ISI marked as approved as per direction of
engg-in-charge.., complete suitable for IPH
standard hospital.It should be warrantied for a
261 31 period of 10 years against manufacturing defects Nos 23.00 49.56 1,139.88
against which ncessary test report & Warrnaty
certificate to be submitted to the department for
genuinity of product & to avail free aftersales
service within warranty period for acceptance of
262 32 Sub-Head II (Light fitting Fixture & Fan) 0 0.00 0.00 0.00
Supplying, installation, of exhaust fan of heavy
duty 300 mm sweep of exhaust fan in the
263 33 existing wall, including fixing & conntection as Nos 12.00 3648.56 43,782.72
required as per direction of Engg.-in-Charge.
Replacement Warranty will be 5 years.
Supplying, installation, testing and commssioning
of 1400 mm sweep white/milky colour ceiling fan
including wiring the down rod of standard length
264 34 (upto 30 cm) with 1.5 sq mm PVC insulated, Nos 15.00 2374.16 35,612.40
copper conductor, single core cable etc. as
required.(With fan Regulator) as required as per
direction of Engg.-in-Charge.Replacement
Warranty will be 5 years.
Supplying, installation, testing and commssioning
of 1200 mm sweep white/milky colour ceiling fan
including wiring the down rod of standard length
265 35 (upto 30 cm) with 1.5 sq mm PVC insulated, Nos 20.00 2361.18 47,223.60
copper conductor, single core cable etc. as
required as per direction of Engg.-in-
Charge,Replacement Warranty will be 5 years..
.(With fan Regulator)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Supplying and fixing of Energy efficient
surface mounted square shape 18 W LED
luminaire of dimension of 225x 225 x 35 mm
consists of white powder coated , die-cast
Alluminium housing with high quality frosted
diffuser for glare-free uniform lighting
distribution with wattage not more than 20 watt
266 36 and lumen output of 1500 lumens, , CRI not less Nos 55.00 1788.88 98,388.40
than 80,CCT of 6000 degree K,THD less than 10%,
with electronic driver, internal surge protection
of 2.5 KV , L70 B50: 30000 hrs (2 yrs warranty)
and all other accessories suitable for operation
on 220 V to 240 V supply as required as per
direction of Engg.-in-Charge. .The luminaire
should be Replacement Warranty will be 5 years
SITC of energy efficient LED tube light fittings
with decorative alluminium batten and LED tube
light having power rating not more than 20 watt
and lumen output not less than 2200 lumen
267 37 complete with electronic driver and all other Nos 25.00 938.10 23,452.50
accessories with diffuser having 5 years
warranty i/c connection etc as required as per
direction of Engg.-in-Charge.. The luminaire
should be Replacement Warranty will be 5 years .
SITC of Sleek LED 10-12 watt mirror light fitting
with extruded polycarbonate housing,High
optically efficient diffuser,above wash basin
complete with all accessoriesetc. directly on wall,
268 38 including connection with 1.5 sq. mm FRLS PVC Nos 6.00 861.40 5,168.40
insulated, copper conductor, single core cable and
earthing etc. as required as per direction of Engg.-
The luminaire should be Replacement Warranty
will be 5 years
Supplying and fixing of Energy efficient
recess mounted LED luminaire with white
powder coated ,pressure die-cast Al housing ,with
high transmititivity,non-yellowing PMMA
diffuser, with wattage not more than 20 watt and
lumen output not less than 2600 Lumen ( 120
lumens/watt ) of size240 x240 x 40 mm , ,CRI not
less than 80,CCT of 5700-6500 degree K,THD less
269 39 than 10%, with Non integrated isolated driver Nos 28.00 2357.64 66,013.92
(protects the output /secondary side from any
disturbance on the input / primary side ensuring
safe operation), all other accessories , life : 50,000
burning hours (5 years warranty) , Internal surge
protection of 3 KV suitable for operation on 230
V, 50 Hz supply as required as per direction of
Engg.-in-Charge. The luminaire should be
Replacement Warranty will be 5 years.
Supplying, installation, testing and commssioning
of 400 mm sweep wall fan including wiring
with 1.5 sq mm PVC insulated, copper conductor,
270 40 single core cable etc. as required as required as Nos 6.00 2542.90 15,257.40
per direction of Engg.-in-Charge.Replacement
Warranty will be 5 years.
Supplying and fixing extra conduit down rod of
20 cm length G.I. pipe 15 mm dia, heavy gauge
including painting etc. as requiredas required as
271 41 per direction of Engg.-in-Charge . Nos 35.00 37.76 1,321.60
(Note : More than 5 cm length shall be rounded to
the nearest 10 cm and 5 cm or less shall be
ignored)of ISI mark as approved.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
SITC of energy efficient LED 45W for lighting
from top having power rating not more than 45
watt and lumen output not less than 4500 lumen
complete with electronic driver and all other
272 42 accessories with diffuser having 2 years Nos 6.00 4363.64 26,181.84
warranty i/c connection etc as required as per
direction of Engg.-in-Charge.. The luminaire
should be Replacement Warranty will be 5 years .
273 43 BDBS,DB,AC DB,FLOOR PANELS,MCBS 0 0.00 0.00 0.00
Supplying and fixing of following mentioned
way, three pole/single pole and neutral, sheet
steel,double door MCB distribution board, 415
volts/240 volts shall be as per IEC 61439-
3,integrated door earthing system offering
additional safety to the user,High quality
polyurethane Gasket,the box and cover shall be
fabricated to withstand IK09,the DB should be
properly pre-treated with 7 tank process and
duly powder coated, phosphatized with powder
coated finish, on surface/recess, complete with
terminal blocks,with suitable size FR PVC
insulated copper conducter up to terminal blocks,
tinned copper busbar, neutral busbar, earth bar,
din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-
Betaguard/ Schneider- Acti
9/Panasonic(Equivalant model) /ABB(Equivalant
model) or equievalant reputed make & model A
catagory ISI marked as approved. as per direction
of Engg.-in-Charge. The Distribution boards
should be Replacement Warranty will be 5 years
4 Way(8+12) Way TPN MCB DD DB Horizontal
Type as per IEC 61439-3 suitable for Flush
mounting and Surface mounting with 100A
Copper Bus Bar for each phase, with neutral Bus
275 45 bar, Earth Bar & Cable ties for cable management, Nos 2.00 2553.52 5,107.04
prefitted masking sheet, IP43-IK09 with metal
door(FOR LIGHT,POWER INDOOR,3-PH,POWER
LOAD) Warranty on DB is 2 years.
Supply and fixing of 12 way DD single pole and
neutral sheet steel MCB distribution board 250V
on surface/recess complete with tinned copper
bus bar, neutral bus bar, earth bar, din bar,
detachable gland plate, interconnections,
276 46 phosphatized and powder painted including Nos 2.00 2244.36 4,488.72
earthing etc. as required (but with out MCB/
RCCB/ Isolator) (ALL LIGHT WITH
CORRIDOOR/COMMON AREA,EM LIGHT,UPS
LOAD, EM LOAD LIGHT LOAD,POWER LOAD )
2+4 way MCB Enclosure DB (GLAZED
277 47 door)(only each EM. CONNECTION UPS LOAD) Nos 2.00 1923.40 3,846.80
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Supplying and fixing 20 amps rating, 240 volts, C
series, Double poles MCB of in the existing MCB
DB complete with connections as per direction of
Engg.-in-Charge. The MCB should be
Replacement Warranty will be 5 years .MCB
should have the fault indication system in
different colour for ON, OFF & TRIP condition or
Mid trip position for Trip conditions for easier
identification of fault.Warranty on MCB is 5
Supplying and fixing 6 amps to 32 amps rating,
240 volts, C series, single poles MCB of or
equievalant reputed make & model A catagory ISI
marked as approved. the existing MCB DB
complete with connections as per direction of
279 49 Engg.-in-Charge. The MCB should be Nos 45.00 155.76 7,009.20
Replacement Warranty will be 5 years.MCB
should have the fault indication system in
different colour for ON, OFF & TRIP condition or
Mid trip position for Trip conditions for easier
identification of fault.Warranty on MCB is 5
Supplying and fixing 25Amps DP 240 volts,
RCCB,300mA in the existing MCB DB in the
existing MCB DB complete with connections as Nos 2.00 1990.66 3,981.32
per direction of Engg.-in-Charge. The RCCB
should be Replacement Warranty will be 5 years
Supplying and fixing 40Amps DP 240 volts,
RCCB,300mA in the existing MCB DB in the
existing MCB DB complete with connections as Nos 2.00 2270.32 4,540.64
per direction of Engg.-in-Charge. The RCCB
should be Replacement Warranty will be 5 years
Supplying and fixing 63Amps TPN 415 volts,
RCCB,300mA in the existing MCB DB in the
existing MCB DB complete with connections as
282 52 per direction of Engg.-in-Charge.(for power BDB Nos 2.00 3114.02 6,228.04
& AC ODU, 8 way TPN BDB IC).The RCCB should
be Replacement Warranty will be 5 years
283 53 (Earthing) INSTALLATION 0 0.00 0.00 0.00
S/IT/C of materials and installation of pipe earth
electrode made out of 50mm dia class B G.I. pipe
of 3.0 metre long with arrangements for fitting/
termination of G.I. flat / wire with G. I. nut bolts
& washers including cost of burnt wood charcoal,
salt, foreign soil, water pouring arrangements,
brick masonary enclosure on top with removable
284 54 RCC cover complete with labour for excavation of Nos 4.00 3701.66 14,806.64
pit in all kinds of soil & rock as required and as
per direction of Engineer-in-charge.The entire
earthing system should be Replacement
Warranty will be 5 years
Providing and fixing 4 mm dia copper wire on
285 55 surface or in recess for loop earthing as Mtr 122.00 112.10 13,676.20
required.as per direction of Engg.-in-Charge.
Providing and fixing 25mm x 5 mm copper strip
286 56 on surface or in recess for connections etc. as Mtr 25.00 1243.72 31,093.00
required as per direction of Engg.-in-Charge.
CABLING AND END TERMINATION MAIN AREA
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property AL.
conductor power cable of 1.1 KV grade of
following size cables as per direction of Engg.-in-
288 58 Charge. Ncessary test report & Warrnaty 0 0.00 0.00 0.00
certificate to be submitted to the department for
genuinity of product & to avail free after sales
service within warranty period for acceptance of
4core x 16 sq mm (MDB TO FDBL/FDBU
4 core x 4 sq mm (for small power/LIGHT TO
Laying of PVC Insulated PVC Seated /XLPE power
cable of 1.1 kv grade size not exceeding 25 SQ.
MM direct in ground in the trench in one
293 63 horizental formation including excavation ,sand Mtr 65.00 151.04 9,817.60
coushing protection covering and refilling the
trench etc as required as per direction of Engg.-in -
Laying of PVC Insulated PVC Seated /XLPE power
cable of 1.1 kv grade size not exceeding 25 SQ.
294 64 MM direct in ground in the EXISTING PIPE etc as Mtr 33.00 48.38 1,596.54
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE power
cable of 1.1 kv grade size exceeding 25 SQ. MM
295 65 but not exceeding 400 SQ. MM direct in ground in Mtr 25.00 66.08 1,652.00
the EXISTING PIPE etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE power
cable of 1.1 kv grade size not exceeding 25 SQ.
MM in open duct etc as required as per direction
of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE power
cable of 1.1 kv grade size exceeding 25 SQ. MM
297 67 in open duct 400 SQ. MM direct in ground in the Mtr 12.00 53.10 637.20
EXISTING PIPE etc as required as per direction of
Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE power
cable of 1.1 kv grade size not exceeding 25 SQ.
298 68 MM in surface with shaddle and screw etc as Mtr 15.00 94.40 1,416.00
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE power
cable of 1.1 kv grade size not exceeding 120 SQ.
299 69 MM From 25 SQ. MM in surface with shaddle Mtr 23.00 149.86 3,446.78
and screw etc as required as per direction of
Engg.-in -charge.
Supplying and making end termination with
brass compression gland and aluminium lugs for
following mentioned size cable.as per direction of
Engg.-in-Charge.
Providing,fixing and laying of fallowing dia G.I.
pipe (medium class) in ground complete with G.I
fitting incl. trenching(75 mm depth)and refilling
as per direction of Engg.-in-Charge.
Providing,fixing and laying of fallowing dia HDPE
pipe (medium class) in ground complete with
fitting incl. trenching(75 mm depth)and refilling
as per direction of Engg.-in-Charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel (for
both light and power circuit) made out by 2mm
CRCA steel sheet duly derusted & pented by
308 78 simens gray powder cote paint is designed as G.A Set 1.00 99774.90 99,774.90
drawing as per direction of Engg.-in-Charge.
Warrentee period of replacement of panel &
accessories must be 5 years & compelete test
certificate must be submitted along with panel
board including component list.
In commer Main- 01 number of 125(80-125)
Amps 4P MCCB with Rom & sprader link,25 Ka &
01 nos of40A 4P O/L changeover switch for DG & 0.00
Servo with 40A 4P MCB. .(Icu=100%Ics)with
shunt trip.with axulary for BMS
Busbar- 04 numbers of 200Amps Electrolytic
copper busbar duly sleeved by color coaded PVC
sleeve & supported by suitable size DMC
Busbar DG - 04 numbers of 60 Amps Electrolytic
copper busbar duly sleeved by color coaded PVC
sleeve & supported by suitable size DMC
Out going- (i) 63A 4P MCB 6 NOS FOR POWER
BDB GF(Legrand/Schneider make)
Out going- (ii) 06 nos 32A 4P MCB LIGHT BDB
AC IDU BDB/LIGHT
BDB,LIFT,WATER,solar,ups(Legrand/Schneider
Out going- (iii) 06 no 32A 2P MCB LIGHT BDB AC
BDB,LIFT,WATER,solar,ups(Legrand/Schneider
Instrument- (i)3 numbers phase indicating lamp
with toggle switch & HRC fuse.
(ii) 01 set of digital type multifunction meter
316 86 with CT for voltage,current,frequency,PF,THD
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 200mm(W), of Legrand - Cablofil
make or equievalant reputed make & model A
catogory, ISI marked as approved .The Load
bearing capacity of the Cable Trays should be
minimum of 104.8Kg/meter at the span of
1.5Meter as per UL specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray must
be 5 years & compelete test certificate must be
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , FLOOR RACE WAY WITH JUNCTION with
internal dimensions of size 54mm(H) x
200mm(W), of Legrand - Cablofil make or
equievalant reputed make ISI marked as
approved .The Load bearing capacity of the Cable
Trays should be minimum of 104.8Kg/meter at
318 88 the span of 1.5Meter as per UL mtrs 8.00 1295.64 10,365.12
specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required.
10 KVA UPS SYSTEM(OFFICE & EMERGENCY
Supply ,installation ,testing & commissioning of
10 KVA ON LINE UPS SYSTEM WITH suitable size
battery bank, rated of battery & isolation
transformer, IGBT based inverter system with
inbuilt isolation transformer & automatic phase
sicuency corrector of 3ph in put to 3 ph
output,415V,protection for fault by
OL,UV,EF,GF,OC,Ph. Sicuency release of
equievalant model of APC/ Schneider/ RELLIO/
320 90 Emersion or equievalant reputed make A Set 1.00 498697.50 4,98,697.50
catogory, ISI marked as approved ) including
supply of rack inverter stand with sufficient
backup upto 30 MINUTES with all required
accessories to complete the job including all
connection.LOAD OF CONF.) as per direction of
Engg.-in-Charge. Warrentee period of all
accessories & component & system must be 5
years & compelete test certificate must be
submitted along with ups including component
20 KVA DG WITH AMF PANEL
Supply, Transportation, erection, testing and
commissioning of 3 Phase, 415V, 50Hz, water
cooled multi cylinder diesel generator set with
alternator of 20 KVA with suitable AMF panel (
Make -Kirloskar / Jakson / sterling) out put
contineous rating directly coupled Engine and
Alternator with guard and mounted on a common
base plate of Robust construction and complete
without AMF panel having IP-52 protection,
Acoustic Enclosure as per CPCB norms , sound
absorbing material, to restrict sound level up to
75 dB up to 1 mtr distance and as per CPCB
norms etc as per following specifications
mentioned below.
A. Alternator make : Kirloskar / Stamford /
Crompton Greaves / Leroy Somer /Caterpillar or
equievalant reputed make & model ISI marked as
approved as per direction of Engg.-in-Charge.
Warrentee period of panel must be 5 years &
compelete test certificate must be submitted
along with DG set including component list &
smoke exhaust system drawing,certified ISO 8528
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
ALTERNATOR:The alternator of the output rating
shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging
at 1500 RPM. The alternator is self excited, self
323 93 regulated, and shall confirm to IS: 13364 of 1992 0.00
with regulation of +5% from no load to full load.
degree of protections shall be IP21.
ENGINE: Diesel Engine make : Kirloskar /
Cummins / Caterpillar / Perkins /Volvo penta
/Ashok Leyland / Mahindra & Mahindra /
Greaves Cotton /Tata or equievalant make &
model ISI marked as approved . Diesel Engine
start, developing suitable BHP output at 1500
RPM with mechanical / electronic governing so
as to enable the alternator to give 20 KVA
continuous output at 0.8 P.F. lagging at NTP
conditions. The diesel engine shall be capable of
providing 10% O/L for 1 Hr for every 11 Hrs of
continuous running at full load. The engine with
1st filling of oil and Diesel etc.
01. Exhaust pipe of required size and length with
insulation or clading.
02. Diesel tank suitable for 8 to 10 Hours running
03. Residential Silencer.
04. SMF Batteries with leads as per the
Manufacturer standards
BASE PLATE: Common Base Plate of required
size for mounting of Engine Alternator Set
325 95 fabricated from MS Channerl and vibration 0.00
damping arrangement with cushy foor mounting
including paintng etc. as required.
FOUNDATION: Suitable size Cement Concrete
(1:2:4) foundation duly plastered and finished
with neat coat Cement as required along with
smoke exhaust system piping including base
frame of structure & lightening protection
326 96 system. *It also includes 2 nos GI pipe earthing 0.00
for body and 2 nos copper plate earthing for
neutral, control cable of 15mtr 2.5sqmm 6core ,
civil foundation work.
(The Manufacturing of DG set shall not in any
case be more than six months old from the date
of award of work)
AMF PANEL: Cubical, Compartmentalized, AMF
Panel Baord with all Power & Control
Contractors, Switches, Meters and other
327 97 accessories, Internal Wiring, connection, inter- set 1.00 734769.48 7,34,769.48
connection etc. for Trouble Free smooth function
for 20KVA DG Set complete with Battery Charger
& leads as required.
328 98 Sub-Total of Electrical Works 0 0.00 0.00 23,90,481.35
330 1 Supply of A,C with indoor and outdoor unit 0 0.00 0.00 0.00
331 2 1.5 TR high wall split A.C Each 3.00 55445.84 1,66,337.52
332 3 2 TR high wall split A.C Each 3.00 65711.84 1,97,135.52
333 4 REFRIGRANT PIPING 0 0.00 0.00 0.00
Supply,installation of hard/soft copper
refregrant piping,complete with fitting of bends
and other nesessary material to complete the
335 6 1 TR to 3 TR high wall split A.C mtr 12.00 988.84 11,866.08
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Head Unit Qnty. Rate Amount
Supply,installation & fabrication of MS base
frame for both indoor and outdoor unit and
other nesessary material to complete the job.
338 9 1 TR to 3 TR high wall split A.C no 16.00 1984.76 31,756.16
Supply,installation & fabrication of Insulated
drain water piping from indoor to nearestdrain
340 11 point separate to all and other nesessary 0 0.00 0.00 0.00
material to complete the job.
342 13 SHEET METAL WORKS 0 0.00 0.00 0.00
Supply,laying of control cable and other
nesessary material to complete the job.
345 16 For 1 TR to3 TR high wall split A.C mtr 22.00 145.14 3,193.08
346 17 Sub-Total of HVAC Works 0 0.00 0.00 4,13,139.24
347 0 Firefighting Works 0 0.00 0.00 0.00
348 1 EXTINGUISHER SYSTEM 0 0.00 0.00 0.00
Portable Fire Extinguisher System Supplying,
installation, testing and commissioning of CO2
type Fire Extinguisher 4.5 kg capacity confirming
to IS: 2878 made from ISI marked seamless
349 2 cylinder confirming to IS: 7285, fitted with ISI Nos 4.00 12302.68 49,210.72
marked controlled valve confirming to IS: 3224,
high pressure 1mtr discharge hose & horn
complete with initial gas charged with carrying
handle & wall mounting bracket as per direction
of Engineer-in-charge.
350 3 FIRE SIGNAGES SYSTEM 0 0.00 0.00 0.00
Providing and installing in position the following
type of sign boards made out of 3mm thick
"Opaque" PVC foam board with computer cut, 0 0.00 0.00 0.00
PVC non-reflective self adhesive vinyle painted
foam board, complete with mirror fasteners.
Providing and fixing the signages "Fire Exit, Fire
Exit Arrow Down,Fire Exit Arrow Left,Fire Exit
Arrow Right" of 1.5in height letters in white with Nos 6.00 1080.88 6,485.28
green back ground.The size of the board shall be
25cm x 15 cm and shall be fixed at the height of 2
353 0 Sub-Total of Firefighting Works 0 0.00 0.00 55,696.00
365 Grand Total 2,03,14,609.88
365 Grand Total 2,03,14,609.88
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
5 NIT.pdf
Tender Document
3a GCC PMC Contracting Works.pdf
Tender Document
3b SCC.pdf
Tender Document
8 Milestone.pdf
Tender Document
11 BOQ SON 007 NHM.pdf
Tender Document
13 List of Approved Makes NHM Project Odisha.pdf
Tender Document
14 Scope of Work.pdf
Tender Document
Drawings Sonepur PHC.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .